Windows 10 update stopped at 99% and Windows 7 mouse doesn't scroll properly

Original title: windows 10

I am upgrading to windows 10 and I have a good computer, then it should be quick, but the download has stopped and it remains at 99% so I don't know how to solve this problem at all and I have another question on my mouse, I use windows 7 and my mouse doesn't scroll properly.

Hello

Please contact Microsoft Community.

I can understand how annoying, it would be, I suggest refer you to the suggestion given by Andre Da Costa in the mentioned thread:

http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-windows_install/installing-Windows-10-on-a-Windows-7-machine-stuck/d5e75999-A217-40C2-9A09-7b5f6cfbb5ca

I hope this helps. Do not hesitate to contact again us for any further assistance.

Tags: Windows

Similar Questions

  • The scrolling has been weird bar type doesn't appear on the Web sites and is not allowing me to scroll properly.

    For some reason any bar type appears on Web sites and is not allowing me to use scrolling properly the top and bottom of the page. It is present at each Web site. However, when I switched to another browser it can't.

    By pressing F7 solve your problem? (it could be that something called keyboard navigation)

  • Creative cloud update stops at 72% and then I get errorcode 43

    someone has experienced this problem? It is said; Cannot access a critical file/folder

    Hi were,

    Please, try the following steps:

    1. Leave the Adobe Creative cloud and all adobe apps running
    2. Download the installer of cloud to create (CreativeCloudInstaller.dmg)
    3. Changed the permissions on the [HD] > library > Application Support > Adobe Directory read / write for everyone (I'm not sure that this step is necessary, but I changed the permissions on my previous attempt to resolve the error)
    4. Run the creative cloud installer that you downloaded in step 2
    5. Restore the original credentials of the [HD] > library > Application Support > Adobe directory (mine was initially set to read only for everyone)

    Reference: I can't download the new update - error code: 43

    Kind regards

    Sheena

  • WINDOWS PHOTO GALLARY DOESN'T WORK PROPERLY

    I use windows Vista Home Basic

    three to four days I m facing probem

    When I opened a picture using windows photo gallary then windows photo gallary is stop responding

    PL help me.

    I use windows Vista Home Basic

    three to four days I m facing probem

    When I opened a picture using windows photo gallary then windows photo gallary is stop responding

    PL help me.

    =================================
    Your photo library database may be corrupted.

    Maybe the following article offers some ideas:

    Stops Windows Live Photo Gallery (944221)
    answer or does not start
    http://support.Microsoft.com/kb/944221/en-us
    (In later versions of Windows Live Photo Gallery...
    the file name is Pictures.pd5)

    Also... the next Microsoft 'fix' may be worth a try:

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    Windows Photo and slideshow problems
    http://support.Microsoft.com/GP/windows_photo_and_slideshow_diag

    Good luck...

    Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • Windows 7 mouse from works not properly

    I was in the Middle using my computer & my mousepad on the computer has stopped working. (this is not an external mouse pad but the internal buffer itself)  I have Windows 7, all other components, including the mouse on the key finger? works but the touchpad does not work.  Thanks in advance for your help. -Wendy

    It is possible that some hardware components has failed.

    What is the brand and model of your laptop?

    The following can be difficult to do without a mouse (I don't know what 'mouse on finger key' means), but if you have a 'Windows logo' key on your keyboard, try the following:

    1. Press the Windows logo key.  This should open the start menu.
    2. Type devmgmt.msc (typing should appear in the search box) and press enter
    3. Press the TAB key.  This should highlight the name of your computer at the top of the Device Manager window.
    4. Use the down arrow key to navigate entries in Device Manager.
    5. Which, if any, references show a caution icon?
    6. If an entry has a warning icon, press Enter and report the text in 'State of the device.

    You have an external mouse available?

  • Creative and Manager application cloud doesn't load properly and will not uninstall.  How can I get rid of them?

    Creative cloud and Application Manager did not install correctly.  Having the two icons on the screen.  Tried to uninstall it but nothing happens.  How to solve this?

    It was too complicated for an old man.  Someone suggested I try the restore function and who took care of her.  I'm not planning on anything whatsoever to another download from Adobe.  The Adobe programs I do not work in all cases.  Thanks for trying to help.

  • Windows Update stops download of updates and install updates same as if they were never installed

    Windows Update stops download of updates and install updates same as if they were never installed

    Hi Skimbrell,

    Welcome to the Microsoft Answers Community Forum site!

    To resolve this problem, determine if the update has been installed. Then, use one of the methods in the section "Troubleshooting the problem.

    Determine whether the update has been installed

    To determine if the update has been installed, use one of the following methods.

    Method 1: Examine the history of installation
    To view the history of installation, follow these steps:
    1. click on Start, point to all programs, and then click Windows Update or Microsoft Update.
    2. on the Web site, click view update history.
    3. Locate the most recent entry for the specific update.
    4. Note the color of the icon in the status column. If the icon is green, the update has been installed. If the icon is red, the update is not installed.

    For more troubleshooting information, visit the below mentioned link:
    http://support.Microsoft.com/kb/910339/

    Method 2: Reset Windows Update components.
    In order to reset Windows update, visit the following link:
    http://support.Microsoft.com/kb/971058

    I hope the above helps solve your problem!

    Thank you best regards &,.
    Calogero - Microsoft technical support.
    Visit our Microsoft answers feedback Forum
    http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  • NVIDIA GeForce 6600GT driver has stopped working since installing Windows 7 updates. Why? And how to remedy the situation. Tried uninstallingc download update drivers, etc. Still no luck.

    NVIDIA GeForce 6600GT driver has stopped working since installing Windows 7 updates. Why? And how to remedy the situation. Tried uninstallingc download update drivers, etc. Still no luck.

    Message that appears is: -.

    Windows has stopped this device because it has reported problems. (Code 43)

    BB

    Install the latest driver from nVIDIA:

    http://www.nvidia.com/object/Win7-WinVista-32bit-260.99-WHQL-driver.html

    http://www.nvidia.com/object/Win7-WinVista-64bit-260.99-WHQL-driver.html

    "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

  • 8625 all-in-One: 10 Windows updates for null printer and fax for settles not 8620

    We have four machines Windows 10 using our 8625 all-in-in-one on the network.  Only used the installation CD.  The machine stops of if a 8620 update for printer Null and Null fax microsoft who do not always with 0x802200b and 0 x 80070790 respectively.  Otherwise, everything works normally.  These updates can be removed somehow?

    Welcome to the HP community @rball007,

    I understand a computer running Windows 10, which had the printer installed using a Setup disk, now knows the pop ups. My best advice would be to uninstall the printer completely from a PC, the HP printer install wizard for Windows instead, to ensure that the most current drivers for Windows 10 are installed.

    Good luck

  • MAKE WINDOWS UPDATER STOP annoying me

    Is there a way to make Windows Updater STOP recommending an update 'Important '?  I don't use Internet Explorer, it ask me download a 8.8 MB 'security update' for IE, which I did not need.

    Quote your full version of Windows (for example, WinXP SP3;) Windows XP 64 - bit SP2; Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

    While you can't use IE, Windows does so it is very important to keep IE (and Windows) fully-patched at all times!

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Windows Update error code 8000FFFF, and Windows Defender error code 80080005 0 x.

    Hello
    These error messages are on my laptop.  The last successful update was January 14, 2010.  He arrived on my desk before but I changed to windows 7 and no probs so far.  Everything continues to be on my laptop.  So I was a little stuck with reinstalling computer laptop to factory standard and I'm obviously not doing this again, where this post.

    2010-01-31 13:52:44:450 1200 1590 Manager FATAL: UH: 0x8000ffff: EvaluateApplicability failed in CCbs::EvaluateApplicability
    2010-01-31 13:52:44:450 1200 1590 Agent warning: has no rule Installed, updateId = {EF3987A6-1EFC-4620-A5B3-F5E98D4B405E}.101, hr = 8000FFFF
    2010-01-31 13:52:55:420 1200 bf0 Shutdwn user refused the update stopped

    Here are the first 3 lines of the log file, if you need more just ask.

    Thank you.

    Vista SP1 or SP2 installed yet? (just a question, NOT a recommendation)

    Applications, (Norton and McAfee) are notorious for not not upgrade (or uninstalling) itself.

    1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    2. close all open applications (that is, anything with an icon on the taskbar).

    3. After completing some you have a copy of your handy product key, uninstall Norton 360, LiveUpdate and all Norton Add ons via Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

    4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

    NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

    5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

    6. do a clean install of Norton 360 2010 using your product ID & reboot: http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

    TIP: Do not activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

    7. manually and repeatedly run LiveUpdate until you get a prompt "no update more".

    8 test cycle.

    NB: Only one 1 firewall must be enabled at any time. If the Norton Personal Firewall is activated (after you have reinstalled N360), Windows Firewall must be turned off.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Windows Update keeps in downloading and installing KB979909, KB982524 KB982168, KB2604829, KB26536352, KB2656369, KB2686828. constantly.

    Windows Update keeps in downloading and installing KB979909, KB982524 KB982168, KB2604829, KB26536352, KB2656369, KB2686828. constantly. I checked the list of installed programs, and they are already installed. How to stop these downloads without stop the automatic updates.

    Regards Terry Hadigate

    Terry,

    See the article after some troubleshooting for your question:

    Windows Update or Microsoft Update repeatedly offers the same update

    http://support.Microsoft.com/kb/910339/en-us >

    Please let us know if it did or did not help to solve your problem.

    UTC/GMT is 10:59 on Saturday, July 21, 2012

  • After upgrading Office 2003 to Office 2010, when rebooting, open a window of choce of windows update, if you select do not do updates, wauclt.exe runs and the pigs, cold start pc is required

    After upgrading Office 2003 to Office 2010, when rebooting, open a window of choce of windows update, if you select do not do updates, wauclt.exe runs and the pigs, cold start pc is required to restart or allow time (about an hour) for wuauclt stop execution and free PC - our aim here is to bundle 2010 via ZEN na enter the beam perfectly - this popup must be eliminated

    Hi Pops1148,

    ·         Is the question not confined with updated Microsoft Office?

    Follow the suggestions below for a possible solution:

    Method 1: You can follow the steps in the article in the Microsoft Knowledge Base and check if it works.

     

    Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

    http://support.Microsoft.com/kb/910339

    Method 2: Try the SFC (System File Checker) scan on the computer.

    To run the System File Checker tool, follow these steps:

    a. click Startand type cmd in the box start the search .

    b. right click on cmd in the list programs, and then click run as administrator.

    c. If you are prompted for an administrator password or a confirmation, type your password or click on continue

    d. at the command prompt, the following line and press ENTER:

    sfc/scannow

    Reference:

    Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

    http://support.Microsoft.com/kb/310747

     

    File system (CFS) Checker

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

    Method 3: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

    The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

     

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

     

    Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

    Important: While hard disk analysis if bad sectors are found when scanning try to repair this area, all available on which data can be lost.

    Let us know if that helps.

  • Windows install the latest updates on my phone and now I can't access the internet

    Windows Installer automatically of updates on my computer and now even if the system connects to the wireless network and I have only local access he has no internet access.  I tried both with the wired and wireless options and nor will not work.  Everything worked fine until the update system - do not know if I have to do a system restore to when he installed updates (I tried to restore to a point a few days before the download, but it failed) or if I should try to uninstall updates.  While I am not very confident with the work on the computer would like some advice on the best way to go.

    http://www.bleepingcomputer.com/tutorials/tutorial140.html

    Understanding Windows Update and Extras in Windows Vista at the link above.

     

    Remove the Vista updates; two ways to do this:

    1. a System Restore to before the updates:

    Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

    If you use Norton, disable it before using the system restore.

    If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

    Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

    System restore steps according to the info above.

    Also:

    2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

    > then click the one that you don't want > uninstall will appear at the top > uninstall it.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

    > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

    When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

    > or if you do not need an individual > right-click on > UAC prompt > hide it

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Problems with system restore:

    http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

    1. If you use Norton (Etc), disable it before using System Restore. info at the link above.

    2. try SR in safe mode:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    3 Malware will stop at the system restore:

    If necessary, do all the work Safe Mode with network.

     

    To get into Safe Mode with network, press F8 at the Power On / boot and use key arrow upward to get into SafeMode with networking from the list of options, and then press ENTER.

    http://www.Malwarebytes.org/MBAM.php

    Malwarebytes is as its name suggests, a Malware Remover!

    Download the free Version from the link above.

    Download, install, upgrade and scan once a fortnight.

    See you soon.

    Mick Murphy - Microsoft partner

  • Windows Update causes high CPU AND not let me install Windows 10

    Windows 7 update has several issues:

    1 Windows Update Service causes the CPU usage high - CPU usually works 50% or more with a single SVCHOST.exe running.  I click with the right button on the SVCHOST entry in Task Manager-processes and saw all the services that SVCHOST is still running.  One at a time, I stopped and restarted them.  Finally, when I stopped the Windows Update service, the cpu immediately fell to almost nothing.  I rebooted and tested several times, and each time, it was Windows Update service that was causing the high CPU.

    2. Windows 10 Upgrade Advisor says I could upgrade to Windows 10, and get the icon Windows 10 is in the toolbar.  But it has failed to install several times.  Now, after stopping and restarting the service of updating (and I checked, it is started), the window get Windows 10 rises, is empty and goes.

    3. I ran the Update Diagnostic and got 1 error:

    Windows Update error 0 x 80070003(2016-04-04-T-04_56_09P)

    the Details of the Diag Windows Update window said:

    RootCause: RC-DataStore

    Error code: 0 x 80070003

    4. I tried to launch the 'Fixit' for update, but it did nothing.

    5. I tried to update Windows Update WindowsUpdateAgent30 - x 64 .exe Agent,

    but it fails with this message:

    "Windows Update Agent Installer has met a fatal error"

    6. when I try to start Windows Update-check for updates, it displays the dialog box "check for Updates" and activity indicator green runs and runs and runs for more than 10 minutes but nothing happens.  And when I check the view update history, it shows no updates, even though I know that I've run a LOT of updates in recent years.

    7. I thought to reinstall Windows 7.  I went to download from Microsoft, and when repair installation it activated my key it says that it wasn't a retail version, so check with the supplier (in this case HP).  I checked with HP and they said that this machine was is no longer supported.

    8. on the way I've renamed the folder C:\Windows\SoftwareDistribution-Windows SDOLD, force it to create a new (probably why it does not find the old updates).  IT did not help.

    So it seems to me this machine is expandable to 10 Windows (it meets the specifications and the Advisor to update Windows-10 said yes and installed the toolbar).  But something is wrong, probably with Windows Updater, and now nothing will be update or upgrade.  And I can't get a new copy of Windows 7.

    So, any thoughts?  I'm out of ideas.

    All I can say is to ensure that you have the latest Net framework installed manually 4.6.1
    https://www.Microsoft.com/en-US/Download/details.aspx?ID=49982

    And the most recent client update
    https://support.Microsoft.com/en-us/KB/3138612

    Also manually install it kb3136000

    https://support.Microsoft.com/en-us/KB/3136000

Maybe you are looking for

  • Qosmio X 70-problem of fan control

    I formally request the control of my fans! I wish I had the notebook cooler than it already is by JZ my previous changes!The fan starts up very late and temperatures sometimes wear on the border! I use akktuell is no longer my previous Arktic MX4 coo

  • C:\Program AOL Desktop 9.6\AOLBrowser\aolBrowser.exe

    error messages from Windows ++ Runtime LibraryC:\Program Desktop 9.6\AOLBrowser\aolBrowser.exe No action, I took will not affect this problem. What can I do to solve the problem?

  • GUI in wordpad unreconizable

    When I choose print or print preview the task bar screen in high a unreconizable characters or foreign language, where you have to select options.

  • HP1050A J410 all-in-one undetected!

    Hello I am sub Windows 8.1 and my printer scanner allows to work very well. I plug in a single day and it does not recognize, the computer tells me that I don't have the correct driver for the printer and when I download on the site it wont let me ad

  • That means the "service name"? And how is it used by my ISP?

    What, what exactly is this field and so? And how will this affect my connection with my ISP?