Windows 10 won't install after formatting in the installer from the disc
I tried to install 10 Windows on my MacBook pro 13 ' 2012 with SSD and HDD 10.11.5 running. I followed the procedure step by step with the Bootcamp Assistant for two hard drive. I have my USB Windows 10 install prepared, latest updates of Bootcamp and puppy 35 GB disk. I did this several times and can not get pass the Bootcamp with Windows partition install formatting. Whenever I click Next after format, he says "we couldn't create a new partition or locate an existing one. For more information see the installation log files".
it say something about MBR and Windows needs EFI.
I had the same problem, you click on the partition where windows should be installed? Seemed that Windows did not know where to put them.
Tags: Windows Software
Error message "" Adobe AIR Application install"is damaged and cannot be opened"
I uninstalled previous versions, using the uninstall program, deleted all files of AIR incidents, and my computer is not connected to another drive hard or time Machine. A response to does anyone know? Thank you.
Here is the log file
29 oct 07:57:05 Jeremys-Airmac-2 kernel : hfs: installed Adobe AIR on device disk2s1
29 oct 07:57:05 Jeremys Airmac - 2.local mds : (Volume.Normal:2464) volume: 0x7faf54078800 * initiated creation of occluding a default location: 1 SpotLoc: (null) SpotVerLoc: (null): 0/Volumes/Adobe AIR
29 oct 07:57:16 Jeremys Airmac - Adobe AIR installer  2.local: Setup starts with version 184.108.40.2063 on Mac OS 10.10.0 x 86
29 oct 07:57:16 Jeremys Airmac - 2.local Adobe AIR installer : command line is:-psn_0_344148
29 oct 07:57:16 Jeremys Airmac - 2.local Adobe AIR installer : no installed runtime detected
29 oct 07:57:17 Jeremys Airmac - 2.local Adobe AIR installer : the 'CGFontSetShouldUseMulticache' function is obsolete and will be removed in a next update. Unfortunately, this application or a library it uses, use this obsolete function and contributes to an overall degradation of the performance of the system.
29 oct 07:57:20 Jeremys Airmac - 2.local Adobe AIR installer : raise with altitude
29 oct 07:57:20 Jeremys Airmac - 2.local Adobe AIR installer : launch of the sub-process with command line Volumes/Adobe AIR/Adobe AIR Installer.app - ei
29 oct 07:57:25 Jeremys Airmac - 2.local authexec : implementation of the Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR installer
29 oct 07:57:25 Jeremys Airmac - 2.local Adobe AIR installer : Setup starts with version 220.127.116.113 on Mac OS 10.10.0 x 86
29 oct 07:57:25 Jeremys Airmac - 2.local Adobe AIR installer : command line is:-ei
29 oct 07:57:25 Jeremys Airmac - 2.local Adobe AIR installer : no installed runtime detected
29 oct 07:57:25 Jeremys Airmac - 2.local Adobe AIR installer : launch of the sub-process with command/bin/chmod - PAF + rw line "/ Library/Application Support/Adobe.
29 oct 07:57:25 Jeremys Airmac - 2.local Adobe AIR installer : launch of the sub-process/usr/sbin/chown - hfRP jeremy command-line ' / Users/jeremy/Library/Application Support/Adobe.
29 oct 07:57:25 Jeremys Airmac - 2.local Adobe AIR installer : launch of the sub-process with command/bin/chmod - PAF + rw line "/ Users/jeremy/Library/Application Support/Adobe.
29 oct 07:57:25 Jeremys Airmac - 2.local Adobe AIR installer : launch of the sub-process/usr/sbin/chown - hfRP jeremy command-line ' / users/jeremy/Library/Preferences/Macromedia/Flash Player / www.macromedia.com/bin.
29 oct 07:57:25 Jeremys Airmac - 2.local Adobe AIR installer : installation of the silent from runtime. Installation of runtime version 18.104.22.1683
29 oct 07:57:28 Jeremys Airmac - 2.local Adobe AIR installer : Registration Applications/Utilities/Adobe AIR Application Installer.app/Contents/Info.plist
29 oct 07:57:28 Jeremys Airmac - 2.local Adobe AIR installer : launch of the sub-process/usr/sbin/chown hfRP command-line - root: wheel "/ Library/Frameworks/Adobe AIR.framework.
29 oct 07:57:28 Jeremys Airmac - 2.local Adobe AIR installer : subprocess chown successful
29 oct 07:57:28 Jeremys Airmac - 2.local Adobe AIR installer : launch of the sub-process/usr/sbin/chown hfRP command-line - root: wheel "/ Applications/Utilities/Adobe AIR Application Installer.app.
29 oct 07:57:28 Jeremys Airmac - 2.local Adobe AIR installer : subprocess chown successful
29 oct 07:57:28 Jeremys Airmac - 2.local Adobe AIR installer : launch of the sub-process/usr/sbin/chown hfRP command-line - root: wheel "/ Applications/Utilities/Adobe AIR Uninstaller.app.
29 oct 07:57:28 Jeremys Airmac - 2.local Adobe AIR installer : subprocess chown successful
29 oct 07:57:28 Jeremys Airmac - 2.local Adobe AIR installer : end of the installer with the exit code 0
29 oct 07:57:28 Jeremys Airmac - 2.local Adobe AIR installer : elevated installation
29 oct 07:57:33 Jeremys Airmac - 2.local Adobe AIR installer : launch of the sub-process with command line AIR AIR.framework/Versions/1.0/Resources/Adobe Library/Frameworks/Adobe Updater - installupdatecheck
29 oct 07:57:33 Jeremys Airmac - 2.local Adobe AIR installer : end of the installer with the exit code 0
29 oct 07:57:34 Jeremys Airmac - 2.local Adobe AIR installer : Setup starts with version 22.214.171.1243 on Mac OS 10.10.0 x 86
29 oct 07:57:34 Jeremys Airmac - 2.local Adobe AIR installer : command line is:-installupdatecheck
29 oct 07:57:34 Jeremys Airmac - 2.local Adobe AIR installer : installed the runtime (126.96.36.1993) located in Library/Frameworks/Adobe AIR.framework
29 oct 07:57:35 Jeremys Airmac - 2.local Adobe AIR installer : pingback request execution
29 oct 07:57:35 Jeremys Airmac - 2.local Adobe AIR installer : Pingback request ended with the HTTP 200 status
29 oct 07:57:35 Jeremys Airmac - 2.local Adobe AIR installer : from DURATION background update checking
29 Oct 07:57:35 Jeremys Airmac - 2.local Adobe AIR installer : download update start background of http://airdownload.Adobe.com/air/3/background/MacOS/x86/patch/188.8.131.523/update
29 Oct 07:57:35 Jeremys Airmac - 2.local Adobe AIR installer : unpacking http://airdownload.Adobe.com/air/3/background/MacOS/x86/patch/184.108.40.2063/update users / jeremy/Library/Application Support / Adobe / AIR / Updater / background
29 oct 07:57:35 Jeremys Airmac - 2.local Adobe AIR installer : update of the Runtime is not available
29 oct 07:57:35 Jeremys Airmac - 2.local Adobe AIR installer : unpacking cancelled
29 oct 07:57:35 Jeremys Airmac - 2.local Adobe AIR installer : end of the installer with the exit code 0
29 oct 07:58:36 Jeremys-Airmac-2 kernel : proc 617: load the code signing error 4 file "Adobe AIR Application Installer".
29 oct 07:58:36 Jeremys Airmac - 2.local amfid : / Applications/Utilities/Adobe AIR invalid signature of Application Installer.app/Contents/MacOS/Adobe AIR Application Installer: 0xfffefa2a
29 oct 07:58:49 [1 Jeremys-Airmac-2] com.apple.xpc.launchd (com.apple.xpc.launchd.oneshot.0x1000000f.Adobe AIR install ) Application: Service came out because of the signal: killed: 9
I have a similar question with one of my clients. The reason was the app was signed by the self-created certificate, which is (obviously) not recognized by the system. Try going to system preferences > Security & Privacy > General and change "Allow downloaded applications on" setting.
My system is XP SP3. I have MSOffice 2003 SP3. I have 28 updates for Office that won't install after many attempts and a "FixIt" run or two from Microsoft. That this has something to do with the .net framework 4.0 or something? I used Windows update, and then update Microsoft, all this without success.
If the fixit does not resolve the problem, read the article:
How to troubleshoot incidents to update your installation of Office on the Office Update Web site
original title: updates security for 10/12/2010
Windows 7 won't start after secuity 12/10/2010 datesHelloFollow these steps and check if that helps.Step 1:Remove all external devices and then try to start again.Step 2:Start your computer in safe mode and check if it starts.Step 3:If it starts in safe mode, and then try the system restore , safe mode.Let us know.Aziz Nadeem - Microsoft Support
[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
* Original title: Windows Media Player Windows 7 problem
After having inserted the disc in the drive, the system does not recognize f indicating that a disk has been inserted. Rattling coming from player. HP Pavilion Notebook g series
(Moved to music, photos and video)
Welcome to the Microsoft community.
According to the request, I understand that your system is unable to recognize the F: drive after inserting a disc. I appreciate your efforts to solve this problem.
The issue could be due to one of the following reasons - the drive might be bad, might have a cable loose or slight corrosion on the contacts (usually for a laptop) and other issues.
Given the clicking of the drive I suggest you to clean the optics on the drive by wiping with a barely damp q-tip.
If there is a possibility of cables in bulk. I suggest to remove the power supply, then make sure that the cables at both ends. Remove and replace firmly. For laptops, you can often clean power and contacts data with a pencil eraser.
- Open the Control Panel.
- Click on Device Manager and select CD/DVD.
- Double click on the drivers tab.
- Click update drivers and right click on the Uninstalldisk.
- Reboot- it will refresh the default driver stack.
See the following Article in the Microsoft helps solve problems with CD or DVD drives.
See the Microsoft support Article for CD or DVD drive not recognized by Windows or other programs.
Try these steps and let us know the results for assistance.
I have one of the same type of disc engraved the other day without problem. Tried to burn a CD today the progress achieved 99%, then I got the error message. Windows Media Player could not complete burning because the disc is not compatible with your drive. Try to insert another type of recordable media or use a disc that supports a write speed that is compatible with your drive.
Thank you for giving us the opportunity to help you with this problem.
According to the problem description, you were not able to burn a DVD with Windows Media Player.
You get the error that the disc is not compatible with your drive.
Let me ask you a question.
(1) what is the type of DVD or CD you want to create?
(2) don't you make changes to your computer before this problem?
I would suggest a few troubleshooting methods. Run the Windows Media Performance troubleshooting tool and follow the steps in the link to burn a CD or a DVD.
Method 1: Run Windows Media Player Performance convenience store.
Please follow the steps below to do so.
(a) key Windows + W keys on your desk.
(b) write the Troubleshooting in the search box in the upper right.
(c) select the Troubleshooting option after the search.
(d) select the option of Performance of Windows Media Player .
(e) click Next to perform the resolution of the problems of performance of Windows Media Player and follow the steps.
Method 2: Follow the steps in the link here and burn the CD or DVD.
Burn a CD or DVD in Windows Media Player
I hope that solves your problem. Please feel free to write back to us, if you are facing any problem related to Windows.
in windows movie maker, I made a film, but the disc will not play music of any other disk, in the past, I did what I do
You are able to hear the music in the preview?
Try to adjust the volume of an audio clip in the audio / music. And add music from the disc hard if you added songs to a DVD.
1. right click on the audio clip > volume
2 adjust the volume with the cursor.
Bindu S - Microsoft Support
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.
I have a dell laptop l502 with a premium windows home instlled in hard drive 7. now I need to format the hard drive, but how can I keep my windows 7? is it possible to save or I loss my windows genuine?
New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.
This is how the recovery partition is available for the most popular brands
For Dell, press CTRL + F11 directly after switching on the device
This will allow that you reinstall Windows 7 while maintaining a true.
Make sure that you back up your data before reinstalling:
I have upgraded to Windows 8 and now the SDM will not be installed. Why is this?
HP SoftPaq Download Manager (SDM) requires .NET 3.5. Windows 8 has native support for .NET 4.x.
Unfortunately, .NET 4.x is unlike .NET 3.5 where 3.5 reflected in support for 2.0, 3.0, and 3.5 all in one. In our humble opinion, .NET 3.0 and .NET 3.5 must have been called 2.1 and 2.2 .NET, .NET respectively.
From .NET 4.0, Microsoft, is not including backwards support for .NET 2.0, 3.0 and 3.5.
Fortunately, in Windows 8, the .NET Framework 3.5 comes with the operating system. However, it is disabled by default.
To activate the .NET 3.5 in Windows 8, follow these instructions:
- Set up the 'Control Panel'.
- Click the "programs and features".
- Select "Turn Windows fearures on or off" (located at the top left of the window.
- In the dialog box, check the option ".NET Framework 3.5 (including .NET 2.0 and 3.0).
- Click on the Ok"" button.
The SDM installation should work after that.
I just install microsoft updates, then the computer is turned off and it does not load windows. A box appears that says
Microsoft Visual C ++ Runtime Library.
This application has requested the execution to terminate in an unusual way. For more information, contact the application support team.
The options are to click OK or close the box. I tried both and it just keeps popping up the same box as above.
Welcome to Microsoft Vista answers Forum!
I have a few here that might solve the problem.
A.) Firstly, I suggest that you start the computer in safe mode and check if you are able to boot without any problems, safe mode starts Windows with a limited set of files and drivers. Startup programs do not run in safe mode, and only the basic drivers needed to start Windows are installed that, follow these steps to start the computer in safe mode with networking:
To restart the computer using safe mode, restart the computer and press the F8 key for about four to five times. Appears in safe mode listed in the advanced options of Windows. Select Safe Mode, and then press ENTER.
(B) I suggest that you perform a clean boot on your computer, to help troubleshoot error messages and other issues; You can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135
(1) perform the clean boot (check the link to perform the clean boot)
(2) enable half the services
(3) determine whether the problem returns
(4) enable half of the startup items
(5) determine if the problem returns
(6) repeat the steps above until you find out which program or service is causing the issue
After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.
Note: Please make sure that the computer is configured to start as usual by following step 7 of article http://support.microsoft.com/kb/929135.
(C.) I suggest that you perform a scan of the file system [SFC] checker on the computer, the scan replaces the failed system of files with the original files from version of Windows on the computer system, follow the steps below to perform a scan:
I suggest to empty the temp folder and later, follow these steps:
i. Click Start > type % temp % in the start search box > press on enter > delete everything present in the temp folder.
1. Click Start and type cmd in the box start the search.
2. right click on cmd in the list programs and then click Run as administrator.
If you are prompted for an administrator password or a confirmation, type your password or click on continue
3. at the command calls, the following line and press ENTER: sfc/scannow
When the analysis is complete, test to see if the problem you are experiencing is resolved.
Additional information: http://support.microsoft.com/kb/936212
Hope this information is useful.
Let me know if it worked.
All the best!
Thank you, and in what concerns:
Swathi B - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
Update of security for Microsoft Visual C++ 2005 Service Pack 1 (KB2538242).
I'm running Windows 7 x 64.
I have a Windows update that requires the closing down to install. This is not, and after reboot, I have a slower computer.
At this point, even removing the offending program would be useful.
Thank you for your expertise.
Try the methods provided below and see if they help to resolve the issue.
In the case where you are not able to install specific updates then, try the troubleshooting provided in the link below steps to fix the problem.
You cannot install some programs or updates
You can also try to reset the Windows Update components and check if that helps.
Click on the link provided below for more information about resetting Windows Update components.
How to reset the Windows Update components?
Start the computer in a clean boot state and then try to download the updates manually.
Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
Download the updates manually from the link provided below.
MFC Package security update Microsoft Visual C++ 2008 Service Pack 1
MFC Package security update Microsoft Visual C++ 2005 Service Pack 1
I hope this helps.
How can I copy the Photoshop and Illustrator CS6 update files in an external Hardesk so I can install it after formatting my PC or re-install?
Help > update should do it for you after the fresh install CS6.
If you mean that the installation programs, you can download these applications download Creative Suite 6 and copy to an external drive.
If you want to do the same thing for updates, go here: updates to manually download all updates cs6.
I had a virus on my hard drive that seems impossible to remove so I used DBAN to clean the disc. I have a disc under license of Windows XP Home Edition I used several times on this computer - an IBM ThinkPad T42. The player seems to be erased, but now when I try to install Win XP it goes through the formatting process I get a message that says that the formatting may not be completed and the reader can be corrupted or damaged. I tried several times, including the variant of the size of the partition, but I get the same message.2 questions - 1 - is - it a way to tackle this problem and 2 - if I buy a new hard drive, which will solve the problem?Thank you very much in advance for any help on this.
You must initialize and partition the disk before formatting it. See step 5 here--> http://computershopper.com/storage/howto/install-a-new-hard-drive-in-five-easy-steps
In my view, there are many people who seem to have a similar problem to mine, although I was unable to find an answer to one of my questions in this post.
Description of the problem:
Although my Windows Update is defined on download & install updates during the night hours every day, the latest updates, KB26333880, KB2572073and KB2518864 are not be installed. I went to the Windows Update site to check my editing history. He showed the green/white checkmarks next to all 3 updates. The record also showed that updates have been tempted 3 times during the night. After clicking on the button "Express" on the Home Page, the results show 3 above updates, but show "0 bytes', then '0 download time. '
To me, this indicates that there is no update to download, despite the yellow Shield of Notification of update continues to appear in the taskbar.
Corrective measures attempted:
1. I tried to download / install twice unsuccessfully using IE8 and FF (including restarting the computer).
2. download & run the program MS Fixitattempted, but received a message which read, "an unexpected error has occurred, please try again later." No. error code has seen with this message. (I could RECORD the program on my desktop... just couldn't run the establishment).
3 tried to search for the presence of these updates using start > run > %windir%KB###.log (where the # is the individual number of update KB). Every time - a message appears indicating that the file is not found.
4 looked at the Add/Remove Programs list (with the Show updates checkbox checked). No updates KB mentioned above could be found.
5 with SAS, MBAMand Outpost Security Suite Pro scans revealed no malware/security issues. (SAS and MBAM are used only as scanners on request).
This problem with the updates does not download & repeated notifications being indicated in the taskbar has occurred many times before. On this occasion, I called Microsoft several times before finally, my computer remotely accessible support person and spent about 50 minutes to fix the problem.
(Also, it is noted that almost every support person I spoke with has always tried to tell me that MS is not help with the problem of this type.) I had to be rather several in my reply... tell the person that MS IS in fact provide assistance free security-related Windows updates. They now provide free assistance is unknown). Besides... I have more a phone number for States anyway.
My questions to the community:
1. is it possible to download & install these 3 updates?
2 is there an explanation as to why MS Fixit program will not be installed, and if so, are there certain corrective measures I can take which will allow me to download & run this program?
Desktop Dell Dimension 3000 Tower; WIN XP Pro SP3. 2 GB OF RAM; 3.00 gHz CPU; Outpost Security Suite Pro. MBAM Pro (on request only). SAS (on request only); SpywareBlaster; IE8 & FF
Thank you for your time and help, review!
See the RESPONSE message in this thread-online http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/security-updates-kb2633880-kb2633870-are-not-being/49ed2fe1-6782-4498-814a-ccfa6ec1dfc9
system information: HP DV6 LAPTOP, windows vista sp1
When I try to install windows vista sp1 disks/recovery partition that I get the error recovery manager prompting me to choose either to see the details of the failure or restart: CTOERROR.flg as a Notepad on my desk. I did try 100 times but nothing helped. I can't restart after this recovery failure message because it shows the dialog box when restarting: windows security update is not properly installed or is not approved. So, I have to go through the process of recovery again to see the desktop (any operation - music video, internet, all), but only once.
The last time I got this message too. When I did the windows installation of recovery a few months back discs, this time I figured out to install all updates IMP to automatic update via update of windows. All updates have been installed successfully, then it restarted and gone through the process of language settings, time settings and everything...
But this time when I'm trying to update windows, I get windows update, error 0 x 643 which is updating security for .net Framework 3.5 sp1 and update family. I don't know the answer how to exit with this error "windows help" and also this forum too, which asks for the installation of the updates of the .net framework from the windows update site directly. But the problem is:
Updated Windows ask me to restart windows automatic or manual update installation takes place and restart causes problem because it shows the dialog box - windows security update is not installed successfully. I need to install all updates at once like last time of my understanding. :
1. so, if I install the update to windows (to try my luck as last time) it says error 0 x 643 for .net framework and you ask to reboot, and after that when I try to manually install failed 0 x 643 updated it asks me to restart windows for pending updates.
2. in the alternative, if I try to install the update failed everything first just after the failure of the recovery it doesn't allow me to install important updates for vista sp1 and asked to restart windows.
All I need is to update all updates via windows automatic update that is not happening at the moment.
Not even be able to upgrade to sp2 bcz it also restarts for installation.
Thanks in advance.
Download Service Pack 1 will not convert in a disc in Windows Vista Service Pack 1.
A recovery disk will not be useful to perform an Inplace upgrade to.
You will need the original Windows Installation disc.
If the disc that came with the computer, then it would be a drive OEM (manufacturer). This disk can only be used for a reinstallation of Windows.
Hope this helps!
Maybe you are looking for
After installation of Sierra and opening mail 10, the database has been converted and lost about a year-old mails saved on my mackbook pro. Use the reconstruction and did not retrieve that email post November 2015.
I tried to install a Canon MP640 printer with USB on the two Satellite L500 connection and A300 - after installation of the software I get the message "USB Device" not recognized - the L500 running Windows 7 the A300 runs Vista - printer * done * on
I just bought a new curve and can't find a way to transfer all my contacts on my sim card at the same time. The gentlemen at the store told me it was possible.
Hello We have a SX20 (TC7.0.2) and two monitors connected as follows: -. Monitor 1 - projector 2 - TV LCD monitor If we have a video call with a remote party, we want the remote side to display on the monitor 1 (projector) and free view on the monito
As I just changed the other day, I changed the monitor ICC profile on my Mac with the first editor open and I noticed that the video displayed in the program window has not changed with the change of ICC profile color. It took me by surprise.It seem