Windows 2000 keyboard

In Windows 2000 how to reset the keyboard to letters only? Currently shows a 6 of the o key

Hello

1. What is the number of brand and model of your computer?

I suggest you try the steps below and check if it helps

Find the function key (Fn), press it and the digital lock with key

And for the combo is: FN + F11

It may be useful

Tags: Windows

Similar Questions

  • Tecra M2 mapping of the keyboard in Windows 2000

    Hi all

    I have a Tecra M2 on which the WinXP was removed and replaced by a new installation of Windows 2000 SP4 (I prefer not to go into detail as to why this took place).

    My problem is that the keyboard mapping is not correct under Win2000, for example if I press shift + 2 I get a @ and not a '. '. The problem exists with almost all the characters of Maj (' |,-,', ~,', ', @, #, etc..).

    Note that I don't use any software that remaps the keyboard.

    Does anyone know how this bee fixed?

    Thank you very much

    Hello

    I have the same problem on my laptop, but I don't have time to look at the problem until I saw this ad...

    Here is the answer for Windows XP, I guess it's the same for Windows 2000, because the systems are similar.

    Under start/setting/control panel, you will find the icon "regional and Language Options". Double click it and you get a new window. Select the folder "Language" then "Details". A new Windows pop up and from there you can select 'Add' services 'install '. Select your language to enter the menu drop-down, then click on 'OK '. Ensure that the value "default input language" is correct, then click 'OK' and click on 'OK '.

    Normally, the operating system needs to restart to set the hardware!

    Your keyboard should work correctly after the next system startup.

    Let me know if it works for you

    Rusty

  • My MS Wirless Desktop 2000 keyboard and mouse work on my iMac with OS Lion 10.7.3?

    With regard to MS Wirless Desktop 2000 (kyboard and mouse)

    I'm using an iMac with OS 10.7.3Lion.

    Microsoft Wireless Desktop 2000 (keyboard & mouse) I just told bot that's software works with OS 10.4 thru OS 10.6
    It will not install on OS 10.7.3?

    Hello

    Probably best to check with the material support of Ms.

    Wireless Desktop 2000 - details<-- system="" requirements="" -="" macintosh-based="">
    http://www.Microsoft.com/hardware/en-us/p/Wireless-Desktop-2000#details

    The system configuration required

    Windows computer | Macintosh computer

    Computer operating system

    Windows 7, Windows Vista or Windows XP (excluding Windows XP 64-bit)

    Hard drive

    100 MB

    Other

    • USB port
    • Microsoft IntelliPoint v8.0 and Microsoft IntelliType Pro v8.0

    Internet access required for some features. Local telephone and long distance may apply.

    Download the software required for full functionality of all features.

    Internet access required for software installation: www.microsoft.com/hardware/en-us/downloads

    You must accept the terms of the license to download the software.

    2 alkaline batteries (included) required AAA.

    Computer operating system

    Mac OS x v10.4.x - 10, 7

    Hard drive

    30 MB

    Other

    • USB port

    ====================

    Microsoft Hardware support
    http://www.Microsoft.com/hardware/en-us/support

    Microsoft Hardware - contact us
    http://www.Microsoft.com/hardware/en-us/support/contact-us

    Microsoft Hardware Warranty Info.
    http://www.Microsoft.com/hardware/warranties.mspx

    The keyboard and mouse are delivered with 90 tech support of day of the 1st incident that was about to begin when
    contact Microsoft at the number below.

    (If the device is defective, you can check with the vendor or Microsoft).

    Hardware support of MS and warranty claims
    Tech Support 1-800-936-5700 OR 1-800-642-7676 for MS material.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • With the help of old Windows 2000 laptop. Some of the keys by typing numbers instead of letters

    Original title: Sub-cles in Windows 2000

    I have reactivated a portable windows 2000 pro. I find that some of the keys produce a number rather than the letter, as 6 instead of o. That's if for a long time that I have used W 2000 I forgot how to reset the keyboard to letters only.

    In fact, this is not a function of Windows (2000 or another). It is a function of material of your laptop that remaps several keys to duplicate a NUMPAD on a smaller keyboard. In general, the feature is enabled or disabled with a Fn + NumLck key combination or (more rarely) a button dedicated to the NumLck .

    Not knowing the make/model of your real hardware makes it difficult to be more specific.
  • My windows vista computer has the look of windows 2000?

    Hello.

    I have problems with my windows programs.
    I fell asleep last night in front of my computer, and when I woke up, I found that most of my windows programs like version of windows 2000
    Microsoft word, excel and paint that old look and my scroll bar also resembles those of windows 2000
    He also accused many or refuses to answer when I want to attach files in an email, or open a word document.
    Could someone please tell me how to solve this problem, because I don't know what to do...
    Thanks for the help!

    Hello

    try a restore of the system before this happened

    http://www.windowsvistauserguide.com/system_restore.htm

    If necessary do in safe mode

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.
  • F8 does not Windows 2000 Setup

    Hello, just like the title reads above the key F8 does not work during the installation of windows 2000 on my vm. When he asks the user to press F8 to accept the license terms, nothing happens.

    Capture123.JPG

    You must click the mouse in the Virtual Machine display so that it accepts entries to the keyboard.

    On some laptops, if you are on a laptop computer, may also require one to press the fn key and the key F8 .

  • Please let me know how to start firefox in SafeMode to my windows 2000 server.

    I installed R-kiosk and now I am unable to remove it. In windows 2000, there is no folder for firefox.
    So please let me know how to start firefox in safe mode on a windows 2000 OS...

    Thank you very much...
    But I just solved the problem. I haven't done

    Start > run >
    "C:\Program Files\Mozilla Firefox\firefox.exe"-safe-mode
    Safe mode started...

  • Facebook reports that I use v3.5 of Firefox and Windows 2000 when running on 16.0.2 and XP (upgraded system). where is this info and how to reset?

    the PC has been improved from Win2000 to XP and has all the XP service packs. It also runs Firefox 16.0.2. When I go on Facebook and other pages, it says that I'm on an unsupported operating system (said I use Windows 2000), and I should upgrade my browser to the latest version (said I'm under FF 3.5 or 3.6 FF, can't remember which). i've looked through the registry, but not not found something that jumps. where can this info could be stored that Firefox is looking.

    Try reading some sites say that Firefox is obsolete or incompatible, even if it's the latest version

  • Shockwave Flash update will not install on Windows 2000 SP4?

    Does anyone else have this problem? It downloads quite well, but is not installed because of the following error: "the procedure point SetDllDirectoryW entry is not found in the KERNEL32.dll dynamic link library."

    This is for Adobe Flash 11.2.202.235. The previous (current) version was apparently discovered to not be is not so sure.

    Windows 2000 is no longer supported in current versions of Flash 11.

    It seems that Flash Player 10.1.102.64 is the last version for Windows 2000

  • Chrome may be a substitute satisfactory for Firefox on Windows 2000?

    Firefox recommends Opera for a replacement. Chrome would be as good a substitute for Windows 2000 Pro

    12.0 Firefox should work perfectly on Win2000. It's Firefox 13.0 that Windows 2000 will not be able to support.

  • How to install Windows 2000 on Equium A200-1VO?

    Hello

    Can someone help me?

    I would like to install Windows 2000 on the Toshiba Equium A200-1VO laptop, but I need the drivers to do this.
    I have tried the Toshiba web page but cannot find the drivers.

    Can someone please?

    Thank you

    You will not be the drivers because this Vista designed for laptop is not supported by this old operating system. Maybe you can find the drivers for Windows XP Home edition, but not for W2000.

    All you can do is search for the drivers on the net and hope you have success with it.
    I don't know why you would do this, but perhaps you should accept that at some point Toshiba must say stop and don't waste time with the support of the older operating system. I also believe that 0.01% people want to use this old operating system on new generation laptops.

    There is no sense to make support for W2000. What do you think about this?

  • Install Windows 2000 on a Satellite M30X

    Hello everyone,

    I know that this subject has been discussed in 2005, but I can't find the thread. So if someone could help me, it was very appreciated.

    My problem: when I tried to start my laptop yesterday he told me, that a file in windows\system32\config folder was corrupt. I should try to run the installation-CD a pressing R - key. The problem is that the bootprocess since the Windows 2000 CD is finished with a blue screen every time.

    The former thread said that I had to press a special key, after a menu apperas where I can choose the boot options. But I do not remember which key it is.
    Anyone know it?

    Thank you for the good old Germany
    STEFAN aka whynot

    Hi Stefan

    By pressing the F12 should appear in the start menu and you can choose between several boot devices.
    By pressing the C button also allows you to boot from the STRANGE House.

    Good luck

  • Error message at startup in Windows 2000, "Tcmsvr.dll, the file is missing.

    We get the same error messages three times at the start of Windows 2000 on some of our companys computers: "Tcmsvr.dll, file is missing. Computers are Tecra s1 models.

    What driver Toshiba is this related to?

    Hello

    I studied a bit and it seems that this file should be placed in the system32 folder.
    In my opinion, this file is part of Toshiba common modules.
    I m not 100% sure, but you can try to refresh (restore) the common modules.
    Maybe this will help.

  • Cannot install Windows 2000 on SatPro 4600

    Hello

    I have a SatPro 4600, earlier, I got ACPI Bios error when you try to start Windows.

    Is it possible to disable ACPI in the Bios, I couldn't find any option in ACPI Bios 2.60 to turn it off.

    The I formatted the hard drive and try to install Windows 2000 from scratch. But for Setup is copying files to start the installation program, it comes up with an error message.
    "Setup cannot copy the file"File_name"

    And will not let me continue with the Setup program.

    Help, please.

    Hello

    I can't help you much about it, but maybe this article can help you. Check http://support.microsoft.com/kb/319344/en-us

    Good luck!

  • Driver LAN for Satellite Pro L20 Windows 2000

    I am looking for a local network (ethernet) drive to my Satellite Pro L20, who has Windows 2000 on it.
    I found one for WiFi, but not for the Ethernet (cable/CAT).

    Hello

    Well, you can t find all the LAN for Win2000 drivers on the Toshiba page because this unit has been delivered and tested with the Windows Xp operating system.
    However, I found the information that the appliance has a CL LAN Realtek 8100.
    In this case, I guess for visit the site Web of Realtek. You can find a compatible driver for this network adapter.

    http://www.Realtek.com.tw/downloads/downloads1-3.aspx?keyword=8100

    Good bye

Maybe you are looking for

  • IDE #1 error when changing from my dvd on the Satellite 2450-401

    HelloI just bought a Toshiba sd-r6472 dvd - rw to replace my old Teac on my Satellite 2450-401 dvd\cdrw. When I restart my computer, I get the error ide #1 and after loading the system (Windows and Linux) my new DVD - RW disc is not seen. I tried to

  • D7000 will not connect to internet after reinstalling

    Hello We moved our D7000 modem router from one room to the other and now it does not connect to internet at all. I spoke with our ISP and everything is fine on their end. I connected the modem and reset our ISP connection & the password, and the ISP

  • Windows Server 2012 - Windows - error PXE Deployment Services: could not locate the boot server. How can I fix it?

    I tried reinstalling wds and also unlock the ports through my firewall. He can't locate it again. Here are the past mistakes: An error occurred trying to create the UDP endpoint to provider of WDSTFTP on the 192.168.10.7:69 interface. This can occur

  • TCP IP to receive and divide the data in real time

    I'm using labview 11 and I have a computer send data via tcp ip. The data string is like this P 22 33 44 P 22 44 66 P 22 33 11 P and so on are numbers between P x y and z co - ord, I need labview to receive this and separate each x y and z as separat

  • Cannot use guest access

    On a new XAC1900 after the installation of a home network based on IP fixed, with the main computer wired and all other 8 devices connected WiFi and no problem at all, I tried to use guest access. I have configured the SSID with the suffix - comments