Windows 2003 installation switches DRAC4 / I

Hello.

I want to just install Windows 2003 Std R2 Sp2 to PE 1850 DRAC 4 / i media distance characteristic. For some reason, the Setup program fails.

I have connected the virtual media to the Windows Server 2003 iso image, I start PE 1850 from this image and start the installation of Windows. party mode (IE on a blue background) text succeeds. I can create partitions and the file copy starts and goes without errors. Now, if the new server restarts, GUI-mode Setup starts and stops with the error - "install could not access the files needed to continue. This can be caused by an error on the CD or CD media is no longer present in the drive. ' Pressing 'Retry' bombs back and pressing "Cancel" shows following error message - "an error was encountered which prevents the installation to continue. The internal structures of configuration data is corrupted (phase 0). Press OK to view the Setup logs files. »

Virtula media is always connected. DRAC firmware is 1.61 (later).

It is possible at all? is - that someone has installed Windows server 2003 in this way?

Andres P

I found the solution - turn off the built-in CD device. Seems like windows Search installation only the first device.

Tags: Dell Servers

Similar Questions

  • Installation of the latest SP3 on the environment of SharePoint 2007 windows 2003 (32 bit) farm is a failure, need immediate help

    I tried to solve installation SP3.0 in sharing environment point 2007 windows 2003 32-bit, but not able to succeed. I get the following errors, please make a ticket for this problem.

    Product: Microsoft Windows SharePoint Services 3.0 - error 1401.Setup failed to create the UNKNOWN\Components\6DB2163C29DACA44A84BDF952B517880\00002109410100000000000000F01FEC registry key. Make sure you have sufficient permissions to access the registry or contact the Support Services technical Microsoft (PSS) for help. For more information about how to contact PSS, seePSS10R.CHM.

    Please help me

    Thank you

    Karuna

    Hello

    I suggest you to send the same Sharepoint forums to improve the assistance.

    http://social.msdn.Microsoft.com/forums/en/category/SharePoint/

    Thank you!

  • installation of Windows 2003 server on machine existing windows7

    IAM planning to install Windows 2003 server OS on the machine having windows7
    I would like to have a dual-boot setup where I can start/start any one of the
    operating system and start work
    Please note that I will not disturb existing OS i.e, windows7
    Please suggest...

    Assuming you want to install Windows Server 2003 on an empty hard disk or a partition:

    You can start the installation from the installation of Windows Server 2003 to start media. When you are done, follow the steps in this article to repair the boot sector: Windows startup is no longer after you install an earlier version of the operating system in a dual-boot configuration

    For additional tips for Windows Server, please post in Forum Windows Server.  Thank you!

    Carey Frisch

  • Windows 2003 Remote Agent installation problem.

    Dear team,

    I am facing a problem in the installation of the agent RA in win2003.

    Details:-

    1 windows 2003 server r2 SP2

    2. agent remotely 4.1.4.13.16

    3 operating system 32 bit version

    Kindly advice

    Kind regards

    Subash.c

    Hi Philippe,.

    There is a patch for version 4.1.4. 4.1.4 ACS must be installed before you install this hotfix.

    Instructions on how to install the patch

    ========================================

    1. make sure that Cisco Secure ACS Agent 4.1.4.13 is installed.

    2. extract the files NTlib.dll, CSLogAgent.exe, CSAgent.exe, CSWinAgent.exe, NAS.dll, ConsoleDLL.dll, csvLog.dll, EndPoint.dll & odbcLogger.dll of Acs - 4.1.4.13.16 - RA.zip

    3. stop the Cisco Secure ACS Agent service.

    4 locate CiscoSecure ACS Agent\bin and save a copy of the course NTlib.dll, NAS.dll, CSAgent.exe, CSLogAgent.exe, CSWinAgent.exe & EndPoint.dll

    5 copy the files NTlib.dll, CSLogAgent.exe, CSWinAgent.exe & EndPoint.dll extracted zip CiscoSecure ACS Agent\bin, NAS.dll, CSAgent.exe

    6 locate CiscoSecure ACS Agent\Support and save a copy of the current ConsoleDLL.dll, csvLog.dll & odbcLogger.dll

    7. ConsoleDLL.dll, csvLog.dll & odbcLogger.dll copy extract the files from the zip to CiscoSecure ACS Agent\Support

    6. start the Service Agent secure Cisco.

    Kind regards

    ~ JG

    Note the useful messages

  • Installation of Windows 2003: cannot find hard drive during the installation units

    Hello

    I found a strange question here...

    ESXi 4.0 installed on DELL R710 with 2 processors E55xx.

    Then we try to install a virtual machine with Windows 2003.

    The installation cannot continue because the virtual machine cannot detect the disk (virtual disk).

    Are we have to use specific drivers (as the old way install Windows Server 2003 on the physical, press F6, and then insert the drivers for drivers, etc2)

    Please advice...

    I have attached the error and the configuration of the VM

    For Windows 2003, the default controller is the parallel of LSI Logic. For this one, the drivers are already included in Windows 2003.

    André

  • installation of windows, windows 2003 in vmware on xp host workstation

    Hello evrybdy,.

    I want to install windows 2003 as a virtual machine on my xp (on desktop) host

    so please tell me

    1. the latest version of vmware workstation, how to get free or evealvation version

    2. how to install it on xp host

    3. installation of windows 2003 as a virtual machine in vmware workstation

    The last Workstation Version is 6.5, but you can't get it for free. Another possibility, use VMware Server - it's free. Simply register to get a license key and download and install from the configuration file.

    Kind regards

    Gerrit Lehr

    If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

  • R12 (gel during installtion) installation on windows 2003 problems

    Hello

    I try to install R12 on windows 2003.
    As per document 402311.1 , I've supported every step of pre-installation (as cygwin installation, active perl, visual c++ 8.0, jre).

    After you create the staging area, I started installation of oracle applications using 'rapidwiz.cmd '.

    Nothing is progressing in step 1 (at 5%). It shows 'done unzip 38 on 93 '.

    Operating system works properly and I am able to perform other activities while the facility was suspended.

    I don't know why the installation is hanging / freezing at 5%.

    Suggestions please...

    user454028,

    How did you create the staging area directory?

    You are able to extract the following file manually in the directory "C:\StageR12\oraDB\Disk2\dbts\stage"?

  • Satellite A300-29N - installation of Windows 2003 server displays an error

    Hello
    Tried to install Windows 2003 Server new Toshiba A300-29N get error.
    -------------
    Search for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to ensure that it is properly configured and completed. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
    Technical information:
    Stop: 0x0000007B (0xF789E63C, 0xc0000034, 0x00000000, 0 x 0000000)
    ------------
    The one facing this problem and any updates.
    Concerning
    Samir

    Hello

    I m wondering that you want to install Windows server on a laptop...

    In any case, it is a known problem and also happens on XP and Vista. To fix this you need to use the laptop SATA driver or you change the SATA mode in the BIOS by AHCI compatible, then you don't need a driver.

    Here are some instructions that might be useful for you:
    http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

    I do not know if you will get a driver for Server 2003 but you can try the XP driver and in the worst cases, it must use compatible mode m.

    Let me give you a little advice: If you have other questions, use the forum search. You can find hundreds of discussions about this.

  • Two questions regarding the installation of Windows 2003 on UCS - C C220 M3

    Hi, I'm trying to do the same procedure as the video below to install a Windows 2003 server in UCS - C 220 M3 with UCSC 2008 M - 8i SAS RAID. This server is managed by the Manager of the UCS 2.2(3g)

    https://supportforums.Cisco.com/video/11927946/how-install-Windows-2003-...

    But the video quality is very bad.

    Can someone help me with 02 questions on this procedure?

    (01) this software has been used to simulate the floppy?
    (02) the image (.img) file that she used was extracted from the UCS DVD ISO Drivers or

    I can't find a direct .img file in the downloads of Cisco?

    Thanks in advance

    My best regards,

    André Lomonaco

    André,

    I think she just used any emulator floppy and .img file, I didn't have a change to watch the entire video, so I don't know what a .img can be useful for...

    Note that Windows 2003 is not supported on this server with this firmware, so you won't find the proper drivers everywhere in cisco.com and also Microsoft's support in his favor on July 14 this year so unless there is a laboratory where unexpected behaviors can be granted, I would not install on C220-M3.

    -Kenny

  • Installation of CS5 on Windows 2003 R2

    I am trying to install CS5 on Windows 2003 R2 server.  For Illustrator CS5 and Indesign CS5 said minimum system requirements are not met.  It will not load on Windows 2003?  A 1 GB of ram and a lot of disk space.  A installed SP2.

    Please notify.

    http://prodesigntools.com/products/adobe-cs5-system-requirements.html: win xp sp3 or higher

  • DELL PE2950: OS (Windows 2003 Server) install via the DRAC5 card and virtual media

    Hi guys,.

    Reference Dell 2950 with DRAC5 and latest Firmware 1.33

    Installation of Windows 2003 remote server on PE2950 via the connection of DRAC

    CD-ROM connected via virtual Media DRAC or ISO image file.

    Restart the server,

    Server recognizes the media and initialize virtual media.

    Then: Hang on blue Windows Setup screen. This happens within 10 seconds.

    Yet once regardless of whether it is virtual CD ISO image that I use...

    I did the install successfully on DELL PE2850 and DRAC4,

    What could be the problem with PE 2950.

    All the world done this before.

    Please let us know of your experience,

    Thank you

    Alex


  • Migration Forms 6i to windows 2003 and linux redhat 5 32-bit

    Hello
    Our forms6i (no EBS) application is running on windows 2003.
    We would like to switch to Forms 11 g on linux redhat 5 32-bit.
    Is that what this migration is supported?
    Can help with the steps to migrate forms 6i to linux?
    Thank you

    Yoav,
    Take a look at Oracle Forms modernization Oracle Forms 6i with Oracle Forms 11 g. This document gives you all the information you need to perform the upgrade. As for moving from Windows to Linux, Oracle Forms is practically independent of the platform, because almost all the major operating systems are supported server. Take a look at The Documentation Oracle Forms and specifically the Forms Services Deployment Guide and the guides of Oracle Fusion Middleware Installation Guide for Oracle Portal, forms, reports and discoverer .

    Hope this helps,
    Craig B-)

    If someone useful or appropriate, please mark accordingly.

  • Upgrade Windows 2003 on-site

    I'm making inplace upgrade of windows 2003 R2 sp2 to windows 2008 32-bit, get error to 68% of windows upgrade below full. It comes to database MS sql server

    Windows installation encountered an unexpected error. Check that the installation sources are accessible and restart the installation. Error code: OxEO6D7363

    Hello

    Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

    If all goes well, they will be able to help you with these previous server issues.

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

    See you soon.

  • Error on Windows 2003 service pack 2 (ql40xx.sys)

    I get the pop following error when you attempt to apply windows 2003 service pack 2:

    Setup has detected a driver (ql40xx.sys) that is not compatible with Windows Server 2003 Service Pack 2. If please contact QLogic for an updated driver and restart the installation.
    It is a 2003 physics attached to the initiator iSCSI via MS iSCSI storage server
    I searched on several forums resolution and there is limited information everywhere associated with this error message
    Here's the whole svcpack.log journal entry
    3.063: 20/03/2013 03:56:46.133 (local)
    3.063: C:\WINDOWS\SoftwareDistribution\Download\f6beed31356960099b028c3b7e0f7fc3\update\update.exe (version 6.3.4.1)
    3.063: service Pack started with following command line: /ParentInfo:2e2d6a92fab565479ffd0c74fb0be2d5 /if
    3.063: in function GetBuildType, line 1170, RegQueryValueEx failed with error 0x2
    3.141: return the value of OnACPower = 1
    3.141: OnACPower returns the value (0 x 1) that is equal to 0 x 1
    3.141: condition succeeded to the OnACPower.Section section in row 1 prerequisites
    3.625: C:\WINDOWS\system32\HAL InternalFileName. DLL is not equal to halcmpx.dll
    3.625: condition succeeded to the CustomHalUnisysBlock.Section section in row 2 of prerequisites
    3.625: C:\WINDOWS\system32\HAL InternalFileName. DLL is not equal to Unisys CMP Server ACPI HAL
    3.625: first condition in CustomHalUniSysBlock.Section2 succeeded
    3.625: condition succeeded to the CustomHalUniSysBlock.Section2 section in line 3 of prerequisites
    3.625: C:\WINDOWS\system32\HAL InternalFileName. DLL is not equal to HALSRAAC. DLL
    3.625: condition succeeded to the CustomHalStratusBlock.Section section in line 4 prerequisites
    3.625: C:\WINDOWS\system32\HAL InternalFileName. DLL is not equal to halce52.dll
    3.625: condition succeeded to the CustomHalMarathonBlock.Section section in line 5 of prerequisites
    3.625: service SpUpdSvc not registered in SCM 0 x 424
    3.625: condition succeeded to the SpUpdSvcBlock.Section section in line 6 requirements
    3.625: start is present
    3.625: SYSTEM\CurrentControlSet\Services\MSDTC\Start is not equal to specified value
    3.625: second Condition in MSDTC. Not.Disabled succeeded
    3.625: condition succeeded MDSTC section. Check.Disabled on line 7 prerequisites
    3.625: C:\WINDOWS\system32\DRIVERS\elxsli2.sys is not present
    3.625: first condition in Emulex.Driver.Compat.Check.Section succeeded
    3.625: condition succeeded to the Emulex.Driver.Compat.Check.Section section in line 8 of prerequisites
    3.625: C:\WINDOWS\system32\DRIVERS\ql40xx.sys is present
    3,672: C:\WINDOWS\system32\DRIVERS\ql40xx.sys FileVersion is less 2.1.3.9
    3,672: Check condition for line 9 of prerequisite returned FALSE
    3.984: installation of Service Pack 2 has encountered an error: Setup has detected a driver (ql40xx.sys) that is not compatible with Windows Server 2003 Service Pack 2. If please contact QLogic for an updated driver and restart the installation.
    4,000: UnRegisterSpuninstForRecovery, failed to delete SpRecoverCmdLine, 0 error value x 2
    4,000: DoInstallation: has no cancellation of registration of spuninst.exe for recovery.
    4,281: Setup has detected a driver (ql40xx.sys) that is not compatible with Windows Server 2003 Service Pack 2. If please contact QLogic for an updated driver and restart the installation.
    4,281: Update.exe extended error code = 0xf0f4

    Support is located in the Windows Server Forums:
    http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

  • Is - this Windows 2003 64-bit supports the USB WD My Passport HIS drive?

    I bought a WD 2 TB my drive USB of HIS passport and tried to connect to a windows 2003 64-bit server, but the drive does not appear in the list of local drive. I checked in the computer management > Device Manager > ComputerName > discs and found that there is a driver for device usb WD My Passport 0748.

    I conect the usb WD drive in my windows XP machine and copy the driver ITS \\Extras\WD device driver folder and transferred to local drive of the windows 2003 server and I tried to update the driver but the driver update failed and telling me that there are no compatible driver in the source folder.

    Here are the contents of the folder:

    wdcsam - security catalog

    wdcsam - information for installation

    wdcsam - file system

    wdcsam64 - file system

    I tried to search the site Web of WD for the compatible driver 64 bits, but, according to the Internet, the USB doesn't have a driver for windows because its use of the microsoft driver. Below are the links related to the topic of Microsoft and WD which, in my case, does not contribute to the problem.

    http://wdc.custhelp.com/app/answers/detail/search/1/A_ID/5419

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/my-book-WD-SES-device-USB-doesn ' t-have-a-driver/d5a255c7-545c-45f4-9e15-8528384daa80

    Is there someone out there have solution for this?

    Thank you

    Hayet

    Hello

    After finding the solution I posted it on this site.

    http://social.technet.Microsoft.com/forums/en-us/winserverfiles/thread/61950e4d-4C45-4108-8535-4b364f3d6056

    Thank you

    Hayet

Maybe you are looking for

  • How can I choose what E-mail should appear in the "from" field by default

    I just installed Thunderbird and triing to set how I like. When I push the button create, I see one of my email address in the form 'From '. But I would like another email to shown here by default. How can I do this?

  • Satellite A200 - hotkeys on XP

    HelloI have Toshiba Satellite A200 1AG (PSAECE) was lowered from Vista to XPI need help to install the correct driver for the utility of access keys quick touchpad (after typing should light with blue light)I reinstalled XP many times had to ocassion

  • Support vlan missing R6250

    Hi guys,. Are there any chance to get r6250 to support the vlan in update close? The specifications of this router is excellent, good speed - memory support for usb 3.0 everything is cool. But I miss a lot of support of vlan. My fiber optics connecti

  • Dragon NaturallySpeaking 8 witn Windows Vista installation

    I have trouble to install Dragon NaturallySpeaking 8 on my computer running Windows Vista. I get a message saying that there are compatibility problems. There do seem to be updates or patches available on the web site of Nuance.

  • Photosmart C309a problem software and driver for Windows 7 64-bit w/IE8 browser.

    When I down load and install this software, the HP Solution Center is not install or download completely.  When I open the HP Solution Center, everything I see is logos and touch the bars, there is no wording or lettering anywhere in the window.  I d