Windows 2003 - server problem

Similar Questions

• Satellite A300-29N - installation of Windows 2003 server displays an error

  Hello
  Tried to install Windows 2003 Server new Toshiba A300-29N get error.
  -------------
  Search for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to ensure that it is properly configured and completed. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
  Technical information:
  Stop: 0x0000007B (0xF789E63C, 0xc0000034, 0x00000000, 0 x 0000000)
  ------------
  The one facing this problem and any updates.
  Concerning
  Samir

  Hello

  I m wondering that you want to install Windows server on a laptop...

  In any case, it is a known problem and also happens on XP and Vista. To fix this you need to use the laptop SATA driver or you change the SATA mode in the BIOS by AHCI compatible, then you don't need a driver.

  Here are some instructions that might be useful for you:
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

  I do not know if you will get a driver for Server 2003 but you can try the XP driver and in the worst cases, it must use compatible mode m.

  Let me give you a little advice: If you have other questions, use the forum search. You can find hundreds of discussions about this.

• can I install Windows 2003 server in my computer hp laptop pav14-v021tu

  Hai

  My system came with windows 8, when I bought.

  But now I thing I finstalling windows server 2003 in this laptop, I heard from my local technician some computers laptops hp does not support Server 2003 (he said need some drivers from hard disk sata hard or something like that)

  As I have not super-hotel with this stuff,

  some we can't so please say argues this model the windows sever 2003 if so this laptop has no other than the Server 2003 addinational drivers to work

  Thank you

  Hello:

  The technician is correct on the sata drivers are needed.

  The problem is that your laptop is an Intel 4th generation of processor and chipset of the 8 series.

  Intel develops not all drivers sata for this chipset, so windows XP and 2003 server will not install on the PC with this chipset.  Nor are there at - he graphics drivers for Windows 2003 server, and probably many other features would not have driver support for hardware that your PC has.

• can not access shared folders & printers in windows 2003 server client XP pro sp3 systems error showing path network not found

  can not access shared folders & printers in windows 2003 server client XP pro sp3 systems error showing network not found path.

  After restarting pc for awhile, we can access shared folder & printer but after 30 minutes (more or less) again cannot access. In the printer folder connected printer displays status as long as it is impossible to connect to the win-2003 server. Please help me out of this problem because I support banking sector.

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Windows 2003 Server IE connectivity server is blocking unexpected drop

  President of our industry, we have 5 server but a windows 2003 Server IE connectivity server is blocking low unexpectedly.we have checked in Event Viewer it is showing the date and the EVENT ID as 6008.please answer why this is happening again and again? What is the problem behind all this?
  Thank you

  Hello Ninadskale,

  Thanks for visiting the site of the community of Microsoft Windows XP.  The question you have posted is related to Windows Server 2003 and would be better suited to the TechNet community. Please visit this link for support.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 2003 server lost the connection with clients for a few seconds

  Anyone know why Windows 2003 Server cut myself with clients (XP loaded to the PC) and reconnects automatically in 1-15 seconds? It happends 2 - 5 times a week. If I restart the server, it won't be for the next 2 weeks. No errors in the event viewer.

  Already tried to do the following problem and always exists

  1. Anti Virus (Symantec) disabled
  2. Connection has changed to a different network port
  3. Ping t (no offline client)
  4. Windows Update

  Total number of 25 users. 30 under license.

  Help, please.

  Thank you and best regards,

  Santini

  Eugenie,

  Thank you for visiting Microsoft Answers!

  The question you have posted is related to Windows Server in a commercial environment and would be better suited to the TechNet community.

  Please visit the link below to find a community that will support what ask you:
  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is it still take a windows 7 computer that the user is completely set up and configured and connect you to a windows 2003 Server

  I spent hours to set up a Windows 7 with CAD programs files and other software and I want to connect to a windows 2003 Server

  without having to start over. Is anyway to do this without losing anything?

  Scott

  Hi Scott,.

  This problem could be better published in TechNet Support Forums. They are experts in your field of investigation and would be in a better position to answer your concerns.

  Post here: https://social.technet.microsoft.com/Forums/en-US/home?category=sqlserver&filter=alltypes&sort=lastpostdesc

  It will be useful.

• vCenter Converter Windows 2003 Server ESXi VM keeps failing

  I'm trying to convert a Windows 2003 server to a virtual machine on a server ESXi. I use the option of VMware Infrastructure. My Server works well, and the authentication is successful. However, 1% it still fails with the error:

  FAILED: A general error occurred: server closed connection after 0 bytes of response read. < io_obj p:0x03f32124, h:

  804, < tube "\\.\pipe\vmware-converter-worker-soap" >, < pipe '\\.\pipe\vmware-converter-worker-soap' > >

  Also, here is the log file

  Help out me?

  I had done. It seems that if you have any software running on a computer backup, it is best to remove or disable. I also cleaned the registry with ccleaner. After all this, the converter has exported the disc in a VM ESXi without problem.

• P2v Windows 2003 Server

  I have a Windows 2003 Server physical that we would like P2v, but drive C has only about 100 MB remaining.  Drive D has 25 GB.    My preference is to install Converster on this server and run locally, but as the C drive is low on space, it may be better to do it remotely.   However, I was wondering if there is a way to always run locally if I install the converter on the D drive.  Is this possible?

  With only 100 MB on the left, I highly recommend you free disk space before you do anything else to avoid problems (not only related to the converter). What I did in the past in such situations, is to configure the location of the page file to the server, which will release usually a few GB (depending on its current size).

  André

• V2V - Windows 2003 - Boot problems

  Hi all,

  I have a little prob with a V2V Windows 2003 Server Standard (Hyper-V) after his conversion to ESXi 4. The powers of the virtual machine, but no boot process not begins - only a cursor flashes.

  Environment:

  Original Machine IBM 3650 (1.Generation) with Win 2008 x 64 Standard as a Hyper-V host

  Target the Machine IBM 3650 M2 with ESXi 4.0 (effective from the website)

  Conversion took place on the original (hot cloning) to the Server Machine target with Converter Standalone 4.0.1 (effective Web site)

  The conversion is completed successfully (100%) and didn't report any errors.

  The next steps I tried, were the steps listed in KB1006269. Unfortunately without success.

  After the above, I tried another conversion of a Machine of Hyper-V (Windows 2008 32-bit Standard), which works quite fine on the new hardware.

  Now my question: what would it be, Win 2003 Server does not start? The volume is accessible (as described in KB1006269 - CHKDSK does report no errors) but no chance to see something other than a cursor blinking. Please give me a hand - I don't got no more ideas...

  Thx a lot for your support

  Jens.

  I was ING p2v & had a similar problem and this fixed it.

  I converted from vmware server 1 started on that, then converted to ESXi4 equipment 7

  A bit of a pain, but it worked...

  VMWare Converter seems to have special characteristics, IE. It's a good idea to recreate the swap files once the machine virtual windows starts.

• M70-159: need graphic driver for Windows 2003 Server

  Can someone tell me wheather I can install windows 2003 server to series M70-159 .
  I am trying to download driver for sound card and many other cards, but I'm not able to get one for windows 2003

  Hello

  AFAIK, this device was shipped only with Windows Xp. In this case only the driver for this OS are available.
  Windows 2003 server edition is not a common operating system, and unfortunately, I do not know if you will find anywhere the right Toshiba drivers for this operating system of m.

  Good bye

• RAID drivers that support Windows 2003 server for Qosmio G30 - 153

  Hello
  Where can I find RAID drivers that support Windows 2003 server for Qosmio G-series(G30-153)
  Thanks in advance.
  Haquette

  Hello

  Windows Server 2003 must support the XP drivers.
  Then, try to search RAID XP drivers!

  cordially :)

• Extremely slow CHKDSK on external Drobo B1200i connected to a Windows 2003 Server)

  (I have a Drobo B1200i related to an unresolved external server) windows 2003 Server), with 9 x 4, double redundancy to discs. The scoreboard shows that all drives are healthy. The player has 2 LUNs. One of the units is 16TO and used to store data, some are small files and some are large files. We found errors when you try to save this logical unit, which prompted running chkdsk. Run us CHKDSK G:/x/f/r it was launched on 22 may at 18:00. He ran steps 1-3 to 25 may, making hundreds of repairs (deleting entry index... recovery of file... orphans replacing non-security IDS valid... Insert the attribute data to place...)

  He has been blocked since May 25 (for 3.5 days) 60% of the step 4 of 5, moving very slowly. Currently, it reads "(14191283 of 20660608 processed files) all 60 percent" the number of processed files remains to be the same number of hours and moves upward then 5000 files and then a few hours left in the same issue for others... At this rate, it may take 3-4 months at the end!

  My questions are the following:

  1 - is it normal to take this amount of time with the large disk like mine (16 TB)?

  2. is there a risk of data loss if I stop it now?

  3. is there a chance that what has already been solved during the early stages is all that was needed, and that interrupts it the process now will be harmless?

  4. If I stop the process now and errors persist, and I decide to run CHKDSK again, it run faster for the early stages and get to the current point faster than the 6 days it has taken to get this far? or it will take another 6 days to join the current point?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• Impossible to activate my trial version window 2003 Server 360 days

  Impossible to activate my trial version window 2003 Server 360 days

  error: product key is not valid

  You have already posted this somewhere else - no matter where you post the answer will always stay the same - no Windows operating system has a 360-day downloadable trial available.

  FC

  http://answers.Microsoft.com/message/fcabf370-9489-4c8a-AAED-ecb578fd00ca

• How to set up SFTP on window 2003 Server?

  I have FTP on a Windows 2003 server.  How could I implement SFTP on it?

  Thank you

  Michelle

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads