Windows 2008 R1 Auto Reboot

Hello

I'm a newbie here.

Question:

I analyzed the memory dump and the error checking has been created with unexpected restart error after restart is trigger.  There is no other information available in the dump file.

The bugcheck was: 0x0000007a (0xffffffffc000009c, 0x00000003bd6fe860, 0xfffff6fc4000b9a0, 0xfffff880017344e0).

I can forget, all KB Microsoft specific might solve this problem?

Kind regards

Paul Chau Chung Hong

This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

If you give us a link to the new thread we can point to some resources it

Tags: Windows

Similar Questions

  • Disable NDPROXY.sys in "Non-Plug and Play drivers" will be harmful to my Windows 2008 and 2003 servers?

    Since December 2010 my business about known Windows 2008 and Windows 2003 servers takeing 50 minutes or more to complete the boot process.  In general, they are sitting at the screen from Windows startup to full time.  Well, a month ago I activated the boot record and found that the NDPROXY.sys file was not loading the start-up newspaper.

    ...

    Loaded driver \SystemRoot\system32\DRIVERS\rdpbus.sys
    Loaded driver \SystemRoot\system32\drivers\swenum.sys
    Loaded driver \SystemRoot\system32\drivers\umbus.sys
    Loaded driver \SystemRoot\system32\DRIVERS\flpydisk.sys
    Loaded driver \SystemRoot\System32\Drivers\NDProxy.SYS
    Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS
    Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS
    Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS
    Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS
    Loaded driver \SystemRoot\system32\drivers\luafv.sys
    Loaded driver \SystemRoot\system32\DRIVERS\lltdio.sys
    Loaded driver \SystemRoot\system32\DRIVERS\rspndr.sys
    Did not load driver \SystemRoot\system32\DRIVERS\MpFilter.sys
    Loaded driver \SystemRoot\system32\DRIVERS\bowser.sys

    ...

    So I studied this and found that there is a patch, http://technet.microsoft.com/en-us/security/bulletin/MS10-099, systems of 2003 was published in December 2010 that touched this file.  Coincidentally, it was at the time we started long reboot problems. Windows 2008 systems were not affected by this patch, but they always NDPROXY.sys running.

    I would like to know if this file is causing this anomaly on my systems, and if so, can it be turned off?

    Hello

    Your question of Windows 2008 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum. You can follow the link to your question:
    http://social.technet.Microsoft.com/forums/en/winserverNAP/threads

  • Problem starting Windows 2008 R2

    I've restored a backup BackupExec (State of data and system) to a server running Windows 2008 R2 to new hardware. New material contains PERC H710P RAID controller and Windows installation media does not contain a driver for it. So my freshly installed with driver PERC system clears my restore of the System State and the system refuses to boot.

    I was not able to find a way to inject PERC drivers in the Windows 2008 R2 (which is the same as that of Windows 7-64) boot environment. I tried to build a Windows ISO updated the with drivers PERC, hoping his recovery option would be smart enough to add the new driver to boot environment. Not only it doesn't seem to be able to change the boot sequence, there is no still load the PERC driver and I've always had to be loaded from a flash drive.

    Anyone have any ideas on how to add the driver support when starting a system that is already installed?

    Thank you

    HammerCR

    This problem has been resolved yesterday. Here is an overview of the steps:

    1. Download the latest driver off site support.dell.com and extract the files on a USB key.
    2. Insert the USB key into the server.
    3. Start on the support of the Windows operating system and use "Shift + F10" to launch a command line window.
      1. It might be a good idea to use two windows to start diskpart in to get the Volume letters
      2. Diskpart.exe and then run 'list volume' to view the volumes
    4. Run the following command:
      DISM / image: C: \ / Add-Driver /driver:D:\percsas3.inf
      Note: C:\ is assumed to be the Windows system drive Partition D:\ is the USB.
    5. Once the driver has been loaded, leave the Windows installation program and restart the system. The system can boot into recovery utility, but choose to boot in Windows 2008 R2. System will reboot and you will be presented with a login screen.

    I hope this will be useful to someone.

  • iSCSI LUN Windows 2008 - ps6010e

    Hi guys

    I have the Virtual Machine that will be used as a Windows 2008 Cluster

    Being my iSCSI SAN I am assigning LUNS to my Virtual Machine is the thing the initial setup in disk management is as below

    Initial configuration
    Disc 1 - data - E
    Bus n ° 0, Target Id 0, LUN 0
    Disc 2 - newspapers - F
    Bus n ° 0, Id, target 1, LUN 0
    Disc 3 - BK - G
    Bus n ° 0, Id, target 2, LUN 0
    Disc 4 - TempDB - H
    Bus n ° 0, Id target 3, LUN 0
    Disc 5 - Quorum - Q
    Bus n ° 0, 4 target Id, LUN 0

    But after I reload my disk management is messed up like this

    After the reboot
    Disc 1 - TempDB - H
    Bus n ° 0, 4 target Id, LUN 0
    Disc 2 - BK - G
    Bus n ° 0, Id target 3, LUN 0
    Disc 3 - Quorum - Q
    Bus n ° 0, Target Id 0, LUN 0
    Disc 4 - data - E
    Bus n ° 0, Id, target 1, LUN 0
    Disc 5 - newspapers - F
    Bus n ° 0, Id, target 2, LUN 0

    After the reboot

    any ideas guys how do I solve this problem?

    Thank you very much

    I don't think you can 'fix' it.  Since the drive letters are correct, I worry the real disk ID #.   The order comes from the order in which they were connected.

  • Memory Hot add, windows 2008 R2 standard?

    Hey guys, reading some contradictory documents on this subject, I would be able to hot add memory in Windows 2008 R2 Standard on Vsphere 4.0 without a reboot?

    I did the hot add in vcenter, but the module memory shows as an error on Windows Server, you cannot start device code (10) error...

    This will require a reboot?

    Thank you

    Kevin

    not compatible with the standard edition

    No doubt Windows ENTERPRISE ONLY feature.

  • ESX 3.5 U4 and U5 for Windows 2008 R2

    Hello

    I have a few questions about upgrading ESX 3.5 U4 to ESX 3.5 U5.

    I have a farm with 4 ESX 3.5 U4 and I need to install several windows 2008 R2 guest OS so I need you to update to the U5. Is it possible to update a single ESX now to accommodate our new 2008 R2 servers and in a few weeks, to upgrade the rest of the ESX?

    I think it will turn off the AP and the vmotion for these comments specific (2008 R2) but what other hosts?

    Where is the update? Is it normal that I need to restart the ESX and boot to a CD?

    Concerning

    JAY

    Hi Jay0,

    I guess your question, you do not use the Update Manager?

    Why would you only upgrade on the host and other later? Are the hosts in the same cluster? I recommend that they all the same version, especially if they are in the same cluster HA.

    Although in the answer you're question about the pre 2008 R2 invited they works perfectly in a cluster with hosts U4 and U5 present.

    The ESX host will need a reboot, but there are faster ways to update your hosts to reinstall with a cd. You can either copy the update to the host and use esxupdate or my recommended method is to use Update Manager.

    Hope this helps

    Mike.

  • 10.2.0.4 patch for Windows 2008 server enterprise edition

    Dear all,

    We anticipate an Upgarde to our database located on 10.2.0.4 Server 2003 32-bit Windows on 64-bit Windows 2008 Enterprise Edition.

    For which I downloaded 10gr 2 for Windows 2008 R2 64-bit software of http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html

    Now, I want to download the Patch for 64-bit Windows 2008 10.2.0.4, I'm getting confused because there because when I select Windows 64 bit Option in the menu of the platform, a lot of results is appreing

    Ex: as illustrated below:
    12687754 Oracle Database Family: Patch
    PSE FOR MLR BUG 12664418 ON TOP OF 11.1.0.7.0 FOR GENERIC RDBMS 10.2.0.4 17-FEB-2012 795K   
    12319379 Oracle Database Family: Patch
    MERGE REQUEST ON TOP OF 10.2.0.4.0 FOR BUGS 10178675 10195109 10.2.0.4 09-FEB-2012 521K   
    11874181 Oracle Database Family: Patch
    MERGE REQUEST ON TOP OF 10.2.0.4.0 FOR BUGS 5184462 8730627 10178675 10195109 10.2.0.4 09-FEB-2012 522K   
     12914910 Oracle Database Family: Patch
    ORACLE 10G 10.2.0.4 PATCH 47 BUG FOR WINDOWS (X64) AMD PLATFORM 10.2.0.4 21-OCT-2011 111M   
    8685215 Oracle Database Family: Patch
    XSL:SORT GIVES WRONG ORDER BETWEEN ALPHA AND NUMERIC STRINGS 10.2.0.4 04-OCT-2011 13K   
    12340457 Oracle Database Family: Patch
    MERGE REQUEST ON TOP OF 10.2.0.4.0 FOR BUGS 6460304 10195109 10.2.0.4 18-AUG-2011 472K   
    12429521 Oracle Database Family: Patch
    ORACLE 10G 10.2.0.4 PATCH 45 BUG FOR WINDOWS (X64) AMD PLATFORM 10.2.0.4 29-JUN-2011 111M   
    8968255 Oracle Database Family: Patch
    DATAPUMP IMPORT FAILED TO IMPORT INDES STATS ORA-39083 AND ORA-01821 RAISED 10.2.0.4 22-JUN-2011 13K   
    10649822 Oracle Database Family: Patch
    EXPDP HANGS WHEN USING EXCLUDE CLAUSE WITH DICTIONARY QUERY 10.2.0.4 21-JUN-2011 110K   
    12674142 Oracle Database Family: Patch
    MERGE REQUEST ON TOP OF 10.2.0.4.0 FOR BUGS 6156708 6269507 7722575 10.2.0.4 21-JUN-2011 166K   
    10357961 Oracle Database Family: Patch
    GV$SYSTEM_FIX_CONTROL SYNONYM DEFINED IN WRONG WAY 10.2.0.4 07-JUN-2011 107K   
    9437010 Oracle Database Family: Patch
    QUERIES ON X$KGLOB TAKING LONG TIME 10.2.0.4 12-MAY-2011 45K   
    4860137 Oracle Database Family: Patch
    ELIMINATE THE RANGE RESTRICTION OF WILDCARD_MAXTERMS 10.2.0.4 01-MAY-2011 10K   
    9360328 Oracle Database Family: Patch
    ORA-12012: ERROR ON AUTO EXECUTE OF JOB 8950~ORA-06532: SUBSCRIPT OUTSIDE OF LIM 10.2.0.4 29-APR-2011 56K   
    10243235 Oracle Database Family: Patch
    CPU Bug 10.2.0.4 14-APR-2011 57K   
    12328503 Oracle Database Family: Patch
    ORACLE 10G 10.2.0.4 PATCH 44 BUG FOR WINDOWS (X64) AMD PLATFORM 10.2.0.4 09-APR-2011 111M   
    11068025 Oracle Database Family: Patch
    DBMS_REDEFINITION.COPY_TABLE_DEPENDENTS FAILS WITH ORA-936 WHEN USING NAMED LOBS 10.2.0.4 07-APR-2011 19K   
    11731126 Oracle Database Family: Patch
    ORACLE 10G 10.2.0.4 PATCH 43 BUG FOR WINDOWS (X64) AMD PLATFORM 10.2.0.4 17-MAR-2011 110M   
    6641104 Oracle Database Family: Patch
    FLASHBACK_SCN DOESN'T WORK WHEN USING SYSDATE 10.2.0.4 16-MAR-2011 99K   
    10195109 Oracle Database Family: Patch
    ORA-4030 DURING DATAPUMP METADATA EXPORT 10.2.0.4 11-MAR-2011 468K   
    The appropriate fix ID or a link would be appreciated

    Thanks in advance

    Salvation;

    No, the patch is 6810189. Please see:
    Quick reference to group of patches Patch [753736.1 ID] numbers

    Respect of
    HELIOS

  • expansion of volume under Windows 2008 Std.Ed RDM. x 64

    Hello

    I read some of the threads here related to this issue but unclear again this would be better as well. My situation is that I do not expandad actuall my RDM from 500 MB to 1 TB for the file system, but Windows 2008. There are interesting feature in Win 2008 where you can shrink or expand the volume depending on the size of your hard drive.

    So my question is how do Windows to see the additional space without rebooting the file server that is running 24 x 7?

    Best regards

    Damiri

    Based on the tests I did with our lab gear, changing the size of a ROW in virtual mode requires a power/power on the virtual machine (not ESX host) cycle before the change of the size of the disk becomes visible to the virtual machine.

  • Re: Toshiba Store Alu 3.5 "1 TB HARD drive works only with Windows 2008 64-bit

    Just bought this as a backup device for Small Business Server 2008 running on Windows 2008 64-bit. However it does not? Are there drivers anywhere for this or it is simply not supported and I need to buy an alternative solution?

    Plugged into my laptop Windows 7 64 bit and no problems.

    Someone else had the same problem?

    Hello

    Unfortunately, there is no other software by download.
    I checked the driver page Toshiba in the Options area but didn't find anything

    AFAIK it of a plug & play HARD drive if you n t need any software to recognize the HARD drive

    There may be a password.
    Try this:
    Connect your HARD drive to the computer when the HARD drive is working
    Select the CD drive with your browser (password)
    Run the ONSPCLCK.exe
    Select 'Options '.
    Select "Disable security password"
    Enter your current password
    Unplug the HARD drive
    connect the HARD drive

    Now, it will work, but with no password protection. Perhaps it would work

  • Pavilion p7 - 1227c needs the network drivers that work with Windows 2008 server R2

    I bought this new Pavilion P7 - 1227C at Costco so that I can install Windows Server 2008 r2 with Hyper-V role

    I managed to install Windows 2008 server but unable to t the wireless or ethernet to work.  I tried to use the driver 64 bit Windows 7 without success.

    I think return Costco if I can't get the network driver that will work with Windows 2008 Server R2

    Thanks, in advance.

    Tour37

    Hi Paul,.

    Thanks for the link, I was able to download AR816X_V.0.14.15_WHQL.

    The driver works for Windows 2008 Server R2.  I just need to find the drivers for the wireless card.

    Best regards

    Round 37

  • Cannot install 3 WMF on Windows 2008 SP2 computer

    I have a system running Windows 2008 SP2 Enterprise edition OS. I try to install windows management framework 3 so I can get running powershell 3.0 on it and unable to do so. When I run the installation of 3 WMF, I get a message "the update does not apply to your system". On the WMF page, it lists this version 3 can be installed on windows 2008 SP2.

    The system has .NET 1.1, installed 3.5 SP1 and 4.5.2. I don't see WMF in the Windows Update list on the server. Suggestions that more I need to install or uninstall?

    Thank you.

    Hello

    Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

    See you soon.

  • Windows 2008 server v2

    Hi all

    Can you help me with this? a windows logon has been deployed on my windows 2008 Server v2. and when I tried to log on to the server as admin, I get a message 'security policies on this computer are set to display information about the last interactive logon. Windows could not retrieve this information. Please contact your network administrator for assistance. Now, I can't log on to the server and everything I tried but to no avail. I can only log on locally as administrator on a client system if the virtual machine is stopped.

    Anyone can help the possible solution?

    Hello

    Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

    See you soon.

  • Update MBAM 2.0 to 2.5 on Windows 2008 R2 MBAM

    Hello.

    I hope someone out there can help you, we have recently tried to upgrade an instance of MBAM version 2.0 to version 2.5 and have received the following message is displayed:

    "This version of this file is not compatible with the version of Windows you are using. Check your computer's system information to see if you need a x 86 (32 bit) or x 64 (64-bit) version of the program. »

    The upgrade was performed on an instance of Windows 2008 R2 64 bit and we are work struggling on why this product could not recognize the operating system? Especially given that all the prerequisites were followed to ensure that we could run the upgrade.

    Thanks in advance,

    Tim

    Wrong forums. Message here:

    TechNet - Windows Server - Microsoft forums

  • I had a windows 2008 r2 domain 1 DC everything worked fine, I added a second windows of DC 2012 now Kerberos does not work for RDP

    I had a windows 2008 r2 domain 1 DC everything worked fine, I added a second windows of DC 2012 now Kerberos does not work for the RDP, Hyper V replication is nothing below a couple of samples of what I see I do not know where to begin finding the problem

    + System

    -Supplier

    [Name]  Microsoft-Windows-Security-Kerberos
    [Guid]  {98E6CFCB-EE0A-41E0-A57B-622D4E1B30B1}
    [EventSourceName]  Kerberos
     
    -EventID 3

    [Qualification] 32768
     
    Version 0
     
    Level 2
     
    Task 0
     
    Opcode 0
     
    Keywords 0 x 80000000000000
     
    -TimeCreated

    [SystemTime] 2016-01 - 03 T 01: 34:27.000000000Z
     
    2991 EventRecordID
     
    Correlation
     
    -Execution

    [ProcessID] 0
    [ThreadID] 0
     
    Channel system
     
    Computer DC02.xxxxxxonline.com
     
    Security

    -EventData

    LogonSession xxxxxxONLINE.COM\xxxxxx
    ClientTime
    1:34:27.0000 03/01/2016 Z ServerTime
    Error code 0 x 19
    ErrorMessage KDC_ERR_PREAUTH_REQUIRED
    ExtendedError
    ClientRealm
    CustomerName
    ServerRealm xxxxxxONLINE.COM
    ServerName krbtgt/xxxxxxONLINE.COM
    TargetName krbtgt / * address email is removed from the privacy *
    ErrorText
    E file
    Line d3f
    30773054A103020113A24D044B3049301FA003020112A1181B16524F434B45594F4E4C494E452E434F4D726F636B65793005A003020117301FA003020103A1181B16524F434B45594F4E4C494E452E434F4D726F636B65793009A103020102A20204003009A103020110A20204003009A10302010FA2020400

    --------------------------------------------------------------------------------

    Binary data:

    In the words

    0000: 54307730 010203A 1 044DA213 3049304B
    0008: 0203A01F 18A 11201 4F52161B 59454B 43
    0010: 494C4E4F 432E454E 6F724D4F 79656B 63
    0018: 03A 00530 30170102 0203A01F 18A 10301
    0020: 4F52161B 59454B 43 494C4E4F 432E454E
    0028: 6F724D4F 79656B 63 03 HAS 10930 A2020102
    0030: 30000402 0203 HAS 109 02A 21001 09300004
    0038: 010203 A 1 0402A20F 00

    In bytes

    0000: 30 77 30 54 A1 03 02 01 0w0T¡...
    0008: 13 4 04 4 B 30 49 30 A2. ¢ M.K0I0
    0010: A0 03 02 01 12 A1 18 1F. ....¡.
    0018: 1 16 52 4F 43 4 B 45 59 B... XXXXXX
    0020: 4F 4 49 4F 4E 45 2ND 43 ONLINE. C
    0028: 4 72 6F 63 6 b 65 79 OMxxxxxx 4F
    0030:30 05 A0 03 02 01 17 30 0. .... 0
    0038: A0 03 02 01 03 A1 18 1F. ....¡.
    0040: 1 16 52 4F 43 4 B 45 59 B... XXXXXX
    0048: 4F 4 49 4F 4E 45 2ND 43 ONLINE. C
    0050: 4 72 6F 63 6 b 65 79 OMxxxxxx 4F
    0058:30 09 03 02 01 02 A2 A1 0... ¡¢
    0060: 02 04 09 03 02 A1 00 30... 0.¡..
    0068:01 A2 02 04 00 30 09 10... ¢... 0.
    0070: A1 03 02 01 0F A2 02 04... ¢...
    0078: 00                        .

    + System

    -Supplier

    [Name]  Microsoft-Windows-Security-Kerberos
    [Guid]  {98E6CFCB-EE0A-41E0-A57B-622D4E1B30B1}
    [EventSourceName]  Kerberos
     
    -EventID 3

    [Qualification] 32768
     
    Version 0
     
    Level 2
     
    Task 0
     
    Opcode 0
     
    Keywords 0 x 80000000000000
     
    -TimeCreated

    [SystemTime] 2016-01 - 02 T 16: 52:38.000000000Z
     
    2943 EventRecordID
     
    Correlation
     
    -Execution

    [ProcessID] 0
    [ThreadID] 0
     
    Channel system
     
    Computer DC02.xxxxxxonline.com
     
    Security

    -EventData

    LogonSession xxxxxxONLINE.COM\xxxxxx
    ClientTime
    16:52:38.0000 02/01/2016 Z ServerTime


    Error code 0 x 19
    ErrorMessage KDC_ERR_PREAUTH_REQUIRED
    ExtendedError
    ClientRealm
    CustomerName
    ServerRealm xxxxxxONLINE.COM
    ServerName krbtgt/xxxxxxONLINE.COM
    TargetName krbtgt / * address email is removed from the privacy *
    ErrorText
    E file
    Line d3f
    30773054A103020113A24D044B3049301FA003020112A1181B16524F434B45594F4E4C494E452E434F4D726F636B65793005A003020117301FA003020103A1181B16524F434B45594F4E4C494E452E434F4D726F636B65793009A103020102A20204003009A103020110A20204003009A10302010FA2020400

    --------------------------------------------------------------------------------

    Binary data:

    In the words

    0000: 54307730 010203A 1 044DA213 3049304B
    0008: 0203A01F 18A 11201 4F52161B 59454B 43
    0010: 494C4E4F 432E454E 6F724D4F 79656B 63
    0018: 03A 00530 30170102 0203A01F 18A 10301
    0020: 4F52161B 59454B 43 494C4E4F 432E454E
    0028: 6F724D4F 79656B 63 03 HAS 10930 A2020102
    0030: 30000402 0203 HAS 109 02A 21001 09300004
    0038: 010203 A 1 0402A20F 00

    In bytes

    0000: 30 77 30 54 A1 03 02 01 0w0T¡...
    0008: 13 4 04 4 B 30 49 30 A2. ¢ M.K0I0
    0010: A0 03 02 01 12 A1 18 1F. ....¡.
    0018: 1 16 52 4F 43 4 B 45 59 B... XXXXXX
    0020: 4F 4 49 4F 4E 45 2ND 43 ONLINE. C
    0028: 4 72 6F 63 6 b 65 79 OMxxxxxx 4F
    0030:30 05 A0 03 02 01 17 30 0. .... 0
    0038: A0 03 02 01 03 A1 18 1F. ....¡.
    0040: 1 16 52 4F 43 4 B 45 59 B... XXXXXX
    0048: 4F 4 49 4F 4E 45 2ND 43 ONLINE. C
    0050: 4 72 6F 63 6 b 65 79 OMxxxxxx 4F
    0058:30 09 03 02 01 02 A2 A1 0... ¡¢
    0060: 02 04 09 03 02 A1 00 30... 0.¡..
    0068:01 A2 02 04 00 30 09 10... ¢... 0.
    0070: A1 03 02 01 0F A2 02 04... ¢...
    0078: 00                        .

    This issue is beyond the scope of this site which is for the consumer to related issues.

    To ensure that you get a proper answer, ask either on the Technet site, if it is a type of Pro problem, or MSDN if it's related to the developer

    http://social.technet.Microsoft.com/forums/en-us/homes/en-us/home

    http://social.msdn.Microsoft.com/Forum

  • Windows Server 2003 in a Windows 2008 file server environment

    Dear all,

    I would like to install windows 2003 server as a file server in Windows 2008 R2 domain.

    I have windows 2012 standard R2 in the additional DC form.

    Please advice me good measures implement the file server in our network.

    Tony

    E-mail address is removed from the privacy *.

    Hello

    Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

    See you soon.

Maybe you are looking for

  • Re: Satellite A100-1VG - DVD drive disappearing

    Hello I have problems with the CD/DVD-RW drive on my Satellite A100-1VG. In fact, from time to time he disappears. It will not work to CDs or DVDs and it does not appear on my computer. The only mention of "Hard disks" in bed Device Manager "FUJITSU

  • Connectivity wifi HP Pavilion 15-e001ax

    Hey I'm on HP Pavilion Notebook 15-e001ax, but I am not able to connect to my wifi hotspot. I've updated my notebook with the latest drivers and everything, but I'm still not able to connect to any wifi connection. Please help me with this I would be

  • BlackBerry BlackBerry classic classics load problems

    I'm having some trouble charging my classic BlackBerry.  The charger seems so sensitive and if I just touch or move it while loading stops.  It also happens with the message that I should use the charger I received with the device - who I am! I do no

  • Port used an IOException when you create a connector to 127.0.0.1 loopback address

    Hello world. I have a problem when I try to establish a connection udp to the loopback address. The IP address of my BlackBerry phone is 192.168.1.108. And the sender and the receiver running like a thread in the same process. When I make a link with

  • How can I view the number of licenses in VMware View 5.1?

    I see how I added to my view mode to connect to license server...Where can I find this number?  Also, can I add additional licenses with the button change?