Windows 7 64-bit extreme slow Spooling/printing to network printer
I am running Windows 7 64-bit and have a Konica Minolta Bizhub C200 as a network connected via "Standard TCP/IP Port" and Protocol LPR printer.
My problem is extremley slow printing/winding queue takes very long and even if the queue is full it still takes time for printing to be recognized by the printer.
I don't know if it's a problem of network or Win 7 as previous XP machinewith the sameprinter and the installation program had no problem, I installed the latest printer driver but it's dated from 31/10/08 so don't know that if there is a problem, he said the pilot was compatible with Win7.
Any solution would be grateful.
Tried all the methods, but no difference so my conclusion was it takes the printer itself...
Checked over the printer setting, discovered 'Network Council Set' and changeda to 'Auto' and now the print speed is what it was before.
Thanks for the help.
Tags: Windows
Similar Questions
-
Windows 7 64 bit extremely slow stop and start
I have a problem with my computer all the reboot process takes about 17 minutes. I thought it might be a problem with HARD drive, so I bought ssd for the OS and and a HARD disk at 7200 RPM for the rest. But the problem is still there any suggestions? And my system is not if badly, even if a bit old, it's windows custom pricing is 7.2.
There is no error message at all.
The problem came to be caused by devices that I joined to the computer and the printer or the card reader caused me trouble in the 5V (I was too happy I solved the problem that I have "no time" to see which one it is). I have it might be useful someone to verify this as well before you start the long process of cleaning, removing programs, reinstalling windows and so on. Thank you for your time and assistance.
-
HP laserjet 1022 windows 7 (64-bit) will not install printer what can I do?
1 HP LaserJet 1022 printer
2. Windows 7 64 bit
3. No Error Message
4. the only changes to the system are updated security Windows Updater. This is a new computer and old was under XP.
I tried to delete the printer, newer software (lj1020-HB-pnp-WIN64-en) download and try to install it, add the printer through windows and even the printer will not work. The cd version will work until you are asked to connect the printer and then nothing happens. I even tried to run overnight to see if it find and install, but nothing happened. This printer is a workhorse for me and I want to keep running, any suggestions on getting this printer is recognized and run again?
See if the 1022 is listed under other devices in Device Manager.
Under 'Other devices' right-click on HP 1022
Select "update driver software... »
Choose "Browse my computer for driver software".
Choose "Let Me pick from a list of drivers for devices on my computer.
Select 'Printers' > next
Under the "factory" > HP
Under "Printers" > HP Laserjet 1020
Select "Yes" to the warning popup -
Running windows 7 32 bit download photosmart 3140 printer have all dates but no printing
Laptop HP dv9700 windows 7 tries to connect to HP printer C3140 running all-in-one made HP download all updates are performed, but not printing
as above
-
Installation of printer on windows 7 64 bit very slow drivers
Hello
I tried to install printer drivers on all our systems to 64-bit windows 7 and it takes a lot of time for the drivers to install. The time it takes to be installed varies from 5 minutes to several hours. The latest downloaded drivers from the manufacture of the printer, but its seems to winodws 7 64-bit takes a long time to install the drivers. Anyone have a similar question? Any available explanation for these very slow install? All responses will be appreciated.
Thank you.
Hi prowess.
Please see the post below with a similar problem and fix possible:
http://social.answers.Microsoft.com/forums/en/w7hardware/thread/7b6d5c8d-C73F-42BF-8744-cefacd7c45de
I hope this helps!
Debra
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
so first, I'll start with my system features:
Reference Dell Xps15zIntel Core i7 - 2640M to 2.8 ghzNVIDIA GT525M 2 GB8 GB RAMWindows 7 Home Premium Service Pack 1 64-bitSamsung PM830 SSD 2.5 "7 GB 218, 42 GB of freeMy laptop is now just a year and plays well outside some blue screen errors that have been fixed. The question now is time to start being significantly slower, especially the loading of the office. It takes 15 seconds to the password screen, to 45 seconds to reach the office and another 45 seconds to the taskbar, icons and things on the desktop to load. What is unusual is that during this black screen, my mouse is displayed, as well as for Advanced System Care 6 performance monitor (I doubt that this is the problem as I had installed for some time). I did the troubleshooting on mine and removed about half of my program without success. I also checked the health and performance of my SSD with SSD and SSD life and both seem to be very positive. I did not any changes to the Bios because I don't want to reinstall my OS and I'm not really sure on workarounds.I tried also to the difficulty of the task of explorer.exe, by checking the value of shell in the registry and it is correct, that it just load slowly at the start and each time I kill and then open it again in the Task Manager. Therefore, I think that my main problem is with explorer.exe loading slowly for some reason, I also removed some desktop icons and taskbar, although I doubt that it makes much difference.I've also done many scans with malware bytes pro and hitman pro, there is no virus on my computer.I appreciate any help, as it is very inconvenient for my more than 90 seconds start time, when he was about 20 when the laptop was new.Thank you very much for your help!P.S. I have about 60 GB of games installed on my pc via steam, if it makes a difference to delete someWhen my Windows 7 is slow to start, I do the following:
Start, then in the search box, type of race. In run, type "msconfig"(sans guillemets), and then click OK. ""In the general tab, make sure that selective startup is selected.Under Selective startup, clear the check box load startup items.Then go to the Startup tab and disable everything except software antivirus and important such as the microsoft. In addition, DO NOT disable any program that you do not recognize.This will disable any unnecessary background programs and prevent to launch at startup.NOTE: you can still start programs even if they do not start at startup. For example, your favorite game is one of them, and you the disabled. Now, the game does not start at startup, but if you click on the game icon later, it will always start, except maybe a bit slower when it starts. Basically, you are delaying the start of programmes which does not need to start at startup, you move a part of the start-up BACK period. The only programs that you do not disable is programs that actually need to start (like if it starts your computer will blow or something similar). -
T400 Windows 7 64 bit can't find printer driver
Hi all
Maybe someone can help with this confusing problem. Just bought the T400 w/Win 7 64-bit on the Lenovo Web site. That's great, except for one thing.
I have a ThinkPad T22 of Win2k on the network with a port parallel printer HP laserjet 6L and a port USB HP DeskJet 970cxi. When I go to add a printer to the T400, Win7 search on the network and detects printers. For the 6 L have downloaded a driver and it works fine. For the 970cxi, he tries to find a driver MS website but can not find a driver.
When I connect the970cxi printer directly to a USB port on the T400 Win7 it finds a driver and it works fine. But not on the network? Even after he found a pilot when it was connected locally?
The network is a Linux Debian machine that can print on both printers. I turned on printer sharing on this topic. The T400 can find printers in the Linux box and print 6L and 970cxi.
I loaded VirtualBox on the T400 and then install Ubuntu Linux. The Ubunu Linux can find printers and print at the same time.
Nobody knows what the hell is going on here? Why the T400 can not find a driver for the 970cxi printer, but when it is connected directly that he finds the printer driver and works?
Is this a problem with Win7 64 bit?
No driver available?
Communication w/printer problem?
Buy a new printer and throw a printer perfectly well?
Thank you
Rich
I did as you suggested but now get a different error: 0 x 00000214
I googled this and found others with the same problem. I tried the solution and it worked!
Here is the link:
Problem network printer connection
In case the link is broken, I cut and pasted here:
1. click on start, click on Control Panel and double click on devices and printers.
2. click on add a printer.
3. Select "add a local printer.
4. Select create a new port ". Select "Local Port" as the port type.5. in the "Enter a port name" box, type the address in the following format.
\\Network address host computer\ [the share name of the printer
And then click Next.
6. choose the driver in the list of drivers. If no driver available, click the Windows Update button, wait the process finishes and then search for the driver again.
7. complete the installation.Thank you! Your suggection made me a mistake, that I could identify. And a solution. I hope others find this useful.
Rich
-
Windows 7 x 64 extremely slow start and the screen 'welcome. '
Hello!
I have a laptop Toshiba Satellite A500:Intel C2D 2.5 GHz
4 GB DDRII 800 MHz RAM
400 GB 5400 RPM Toshiba HDD
ATi 4650 GPUI have Windows 7 Pro X 64 OS real, through MSDNAA
The boot takes 17-21 seconds on the Welcome screen (20-30 seconds ' welcome'), then 1-3 minutes on open office.
I have all the drivers installed, I tried to start the removal of unnecessary startup programs, but it's the same thing, only 1-5 second faster.
I reinstalled my OS several times, the HARD drive is in AHCI mode, but I tried to 'Compatibility', but does not solve the problem.
After bootlogo, there is very high HARD drive activity (people with disabilities search indexer and superfetch too)
With x 86 startup is about 1 min.I suggest a bit of required diagnosis. Try this [how to solve a problem by performing a clean boot in Windows Vista or Windows 7 | http://support.microsoft.com/kb/929135]
-
I have an older Dell running Windows Vista, and it started fine when I got it, but about a month ago it started very slow and refusing to open any program. I can't get the Task Manager to open to all and internet Explorer refuses to connect. I did a complete analysis of the system through Viper and it came out saying: there is nothing more than a few trogans. He also started a taskbar at the top of the screen. No idea how it happened either.
HelloYour computer is probably infected by malicious software. Try following the steps in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide/It provides simple instructions on how to remove malware from a computer. If you have any questions, just ask. I hope this helps you.Brian -
DeskJet 6988 and driver Windows 7 (64-bit) and double-sided printing
This configuration allows only manual duplex printing. How can I change the printer duplex?
This functionality worked correctly with Windows XP.
Unity double-sided default 'not installed', you must specify the duplexer is installed as described in the Windows Vista/Windows 7 Duplex Printing Troubleshooting Guide.
-
Windows 7 64 bit enterprise slow start first on the computer in a lab
Our College, all computers are imaged with the same image. If I take a computer and put in A workshop it takes a new user 50sec to connect the first time. No problem.
In the WORKSHOP c if I take another new image and have the users in advance it takes 30 to 60 minutes to start. The user is on the screen of welcome for this full time. Most of the time when this same user trys from computer 2 workshop C (after that first successful computer 1 boot time is 50sec or so.)
You have ideas of how to debug this
Hello MikeRCTC,
Thanks for posting in the Microsoft Answers forum! To improve the assistance with your issue, I recommend that you post in the TechNet Forum below:
http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads
Hope this helps J
Adam
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Extreme slowness of local area network and Time Capsule wireless speeds
I have a time Capsule Airport Extreme 3 G with firmware version 7.7.3 I use for lan connections / wireless and backup of all apple devices that do not use the cloud. For the last month or so sometimes I ridiculously slow speed issues that cannot be remedied with any one of them that I have tried. Speed control on my i mac or wireless on any device in any location see accelerates it half of what I pay for. If I shoot a speed control to the back of the modem, everything is ok. If I shoot a speed check in a port on my machine Net Pro FVS318G safe with Airport extreme disconnected speeds are fine. But when the capsule is used the speed is slow. This happens not all the time. In fact this am that everything was fine, she just started about an hour or two there once again. And it normally clears up in a few hours on its own. It is like someone is inside my computer slows down I can't even do a backup on my i-phone when this happens. I bought the thinking net machine that triple nat could help I'm not using the vpn option. I'm lost and open for suggestions?
My mac i run El Cap v 10.11.4.
Att Uverse 18 m 1 m
Time capsule two years old.
Check the speed of 1-6 m down issue when happening, 17-18 when well. done before also.
Can you please describe your network topology?
-
After 24 of Firefox update, Windows 7 breaks after the reboot. The network in the taskbar icon is not ready (blue circle on the wireless network icon). But I can't do much. I can't open the network and sharing Center (never opened). Even the Task Manager hangs when I click to show processes from all users. I have to do a system restore for a network working again. I never even launched Firefox.
Wow... I finally have the solution. Windows updates have been applied at the same time I updated Firefox. Bluetooth driver is what broke (which is part of the Centrino wireless). I ended up installing the latest driver from Intel, Windows Update, and then update Firefox... and all is well.
I thank very you much for all your help. Take care.
-
Windows Live Mail extremely slow
Read your own posts, but they offer no concrete solution.
Windows Live Mail is extremely slow on all actions, such as selection, type, transmission, reception, everything, to the point where it is impractical and unusable.
I have a brand new HP Elite, Windows Vista Home Premium x 64, to this day, virus scanned, etc.. All programs work well, including Windows Mail. But Windows Live Mail service is really too slow to be of any use.
I have not agreed to update to IE8 because of many problems posted with it, that's why I continue to use IE7.
Is there a real fix to the extremely slow problem Windows Live Mail? The plethora of forums and posts on this specific topic, it seems that we, potential users are out of luck. Please advice and correct.
Hi Melachrino,
Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to the Live and would be better suited to the online community. Please visit the link below to find a community that will provide the support you want.
http://windowslivehelp.com/community/
JohnD
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
HP990Cse connection via print sever in Windows 7 64 bit
I want to install drivers for a printer HP990Cse that is connected through a print server built into my WD Netcenter network drive. Windows 7 (64-bit) can find the printer, but not the driver. In addition, this printer is not in the list provided in Windows. He asked that the location of the driver files (Browse button), however, I am unable to download driver from the HP website files. All they have is an Assistant to allow the connection via USB or ask the user to just plug the printer on Windows and that it will give the driver. I'm not connect via the USB port, so I don't know what to do.
When you install a Brother printer, I have had no problems since I could download the driver files, place them in a folder and then point Windows to this folder. Where can I get the driver of this printer files or what procedure should I use to install this printer?
Thank you
I'll answer this question myself in the interest of all those who might find themselves in this position. After some advice I found on the Internet. I did the following:
- I installed the printer as a local printer on the USB port allowing Windows to provide the driver. He worked to find plugged into a USB port.
- I then backed up the printer to the print server in the NetCenter.
- Then, I went to the driver on the ports tab and added a new port with the network printer path. For example \\printer_server_name\printers\DESKJET-990C.
It did not work, however. So I went the network and sharing Center and selected the option to view computers and devices which shows print server. I double clicked on the print server, which then displays the connected printer. I double click on the printer to connect to it. I got a message saying that the driver is not found. I clicked on OK to install the driver. When the list of drivers appeared, I have selected HP in the left column and guess what? The 990C printer driver and a bunch of HP printer drivers more have been listed. I chose the 990c and everything worked fine.
I don't know if the installation of the printer locally caused Windows fill the list with several drivers of HP, but it seems like if she did because these drivers were not in the list before.
Maybe you are looking for
-
Windows XP does not start a Word or Excel files
When I try to open a new word file, or access a file set from a floppy, I get a blank page with a few characteristics of the base there. He won't answer, and I have to go out and send a report to Microsoft. I did a virus and spy scan and a full hard
-
It's the first many msgs of error msg that appears on my laptop screen after power on. It wasn't anything newly installed on my laptop. And I want to backup my files but I can not even past the F2 or F12 screen to do so. He no longers can't to the Wi
-
In Explorer windows (win7... new laptop...?) activating the box "Automatically expand to current folder" does not work. I went through tons of forums and no one can answer this recurrent problem. If I navigate through the folders in the left pane usi
-
BlackBerry smartphones update BB which is flashed to metro PCs
I flashed my BB 8330 to metro but I want to update, then I update without spoiling the process made flash my phone to work with Metro PCS?
-
My computer removes the programs and changes the way it works without my help or knowledge
Hello I had a problem recently with my computer changes the way it works with some programs. I use my computer to print postage labels, and all of a sudden, now it asks me to save in my documents before I can print them. I did have to take the additi