Windows 7 64 bit with Abra customer 6.3 error "" point procedure entry GetFileVersionInfoSizeA could not be found in the library of dynamic links VERSION. "" DLL.

Similar Questions

• Download this message when I try to run Lightroom. Point procedure entry AgTransitCargo_pushTransitCargo could not be found in the AgKernel.dll dynamic link library - system: windows 7 64 bit is no error in the log file

  Download this message when I try to run Lightroom. The procedure entry point AgTransitCargo_pushTransitCargo could not be found in the AgKernel.dll dynamic link library

  system: windows 7 64-bit

  There is no error in the log file.

  no error in scannow at the command prompt.

  

  Hi Michela,

  Lightroom makes a call the the AGkernel.dll file, but the file isn't sure what to do because it can't find the line of code within himself to answer. This can happen for several reasons, that fall within these two broad categories: AGkernel.dll is damaged and must be repaired or AGKernel.dll version is incorrect and should be updated to the correct version.

  Here are some things you can do to fix the file:

  -Record again with Windows AGKernel.dll: https://support.microsoft.com/en-us/kb/249873

  -Windows repair: https://support.microsoft.com/en-us/kb/929833

  -Install all the updates that are available for Windows: Windows Installer updates

  -Uninstall and reinstall Lightroom

  Kind regards

  Tanuj

• When I try to download explorer8 to windows xp I get error that says: (the procedure entry point shreggetvaluew is not found in the library of dynamic links SHLWAPI.dll)

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Quote your full version of Windows (for example, WinXP SP3;) Windows XP 64 - bit SP2) when you post in a forum or a newsgroup. Please do it in your next reply.

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?  Who were these applications that run in the background when you tried to install IE8?

  A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

  How TO solve IE8 installation problems
  http://support.Microsoft.com/kb/949220

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• A challenge difficult: RunDLL not ceases to appear with the error msg... module could not be found. It is because I deleted it. Help me stop this msg.

  Awhile back, I stupidly downloaded Arcade yum. (DO NOT DOWNLOAD THIS PROGRAM) Apparently, I thought that I deleted in the uninstall programs, but not completely deleted. This program has always tried to load all types of advertising or not I was on the Arcadeyum site or not. Even after deletion. And I went through all the folders and find all files and erased AY programs.

  Now, I keep getting interrupted by the message: title bar: RunDLL MSG:Error loading C:\users\Paulus\AppData\Local\ArcadeYum\AyHelp.dll

  The specified module could not be found.

  Well, it would be because I removed it manually as I mentioned earlier. I launches the scan to Microsoft security essentials quick scan daily and complete once a week, but that's it. RunDLL program continues to call to load the program. So I guess the question would be: How can I get RunDll to arrest the appellant for a module that does not exist?

  To get knowledge that I have will not load other programs of security due to logic problems, this causes with Security Essentials Program. RunDLL program obviously has a line of code to load the module. How to remove the line or clean the program?

  As I hit anywhere on any program opens the box and my typing does more for a second long enough to make mistakes. Really inconvienient. Thank you.

  Hello

  No program of singles will find everything and that includes MSE.

  And the free Malwarebytes, which is not an AV does not r interfere with MSE as Malwarebytes is a scanner at the request.

  And when you ask us for advice, we give you the best advice we can.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If the problem persists after scanning, take these startup entries:

  "How to use MSCONFIG in Windows Vista"

  http://www.netsquirrel.com/Msconfig/msconfig_vista.html

  You can also use this free program to do, too:

  "Autoruns for Windows V11.32"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  See for this task scheduler.

  See you soon.

• C:\windows\system32\nvcpl.dll the specified module could not be found at the beginning upward

  Original title: starts: error

  At the start of the get dialog box a big X 32\NvCpl.dLL C:\WINDOWS\System loading error RUNDLL

  The specified module could not be found.

  What this mean and how can it be fixed

  Yahneev

  Hello

  The system was recently infected by malware?

  C:\windows\system32\nvcpl.dll is NVidea graphics driver

  Restart and start typing the F8 key

  Select Mode safe mode with networking

  Download the following tool and run a scan complete to rule out malware

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Open the Device Manager and uninstall the NVidea graphics driver

  Reboot and Windows will reload the driver

• Windows XP install error "File\i386\C_437.nls could not be loaded. The error code is 7. Setup cannot continue. Press a key to exit. "

  I've been setting up a windows xp professional operating system, I saw an error message "File\i386\C_437.nls could not be loaded. The error code is 7. Setup cannot continue. Press any key to exit", can anyone help me how can I solve this problem? Thank you.

  Hi HannaAntoun,

  See the article after some troubleshooting for your question:

  http://support.Microsoft.com/kb/330181

  I hope this helps!

• Help you connect ODBC in Windows 7 64 bit with Office 2010 32-bit.

  Hello
  
  Many moons ago, I wrote an application in Java that configured XP machines after sysprep would be deployed. I am currently all our workstations to Windows 7 migration and was check my application always worked and interrogates the correct registry keys etc.
  
  As it turns out however I don't even go there as I think the application is unable to connect to the driver ODBC Microsoft Access in Windows 7 64 bit with Office 2010 32-bit. Here is the code that I have always used and no longer works. I hope someone can tell me how to change the command works on Windows 7 64 bit. If I navigate to C:\Windows\SysWow64\OBDCad32.exe all the drivers I need are there I think, but if I open ODBC in Administrative Tools tab drivers is empty but for SQL. Anyway I have to shut up and here is the code I used to use:
  
  public IOMakeConnection()
  {
  DM = new DisplayMessage();
  ioed = new IOEncryptDecrypt();
  URL = "jdbc:odbc:DRIVER = Microsoft Access Driver (*.mdb); DBQ ="+ GetExtension() + 'Config.mdb; UID = admin; Pwd = password';
  
  VR;
  {
  Class.forName ("sun.jdbc.odbc.JdbcOdbcDriver");
  connection = DriverManager.getConnection (url);
  }
  
  catch (System.Exception e)
  {
  System.out.println ("" + e);
  errorObtainingPath();
  }
  }
  
  The exception is always thrown as my little app that requires the path of the database always loads.
  
  Thanks in advance,
  
  Cheers Kris

  C:\windows\system32\cmd.exe /C CD\ & SET CLASSPATH = C:\SCAConfigurationUtility & CD C:\SCAConfigurationUtility & SCAConfigurationUtility JAVAW

  Well, there is a call to javaw there; because there is no path, it will use the 'java by default'; I don't have no idea how a java version becomes the default java but I would not be surprised if this is the last installation.

  You can force a specific runtime to use by replacing the "javaw" with the full path to the runtime javaw executable you want to use in this particular case (its in the bin directory). It's basic shell btw stuff, it has nothing to do with Java.

• Error message on one of my two Windows 7 PC, 64-bit. "The Apple software update server could not be found.  "Check your internet settings and try again.  Can someone advise?

  These last messsage of error on one of my two Windows 7 PC, 64-bit. "The Apple software update server could not be found.  "Check your internet settings and try again.  My second Windows 7 PC Apple Software Update works normally.  The Apple software update version is 2.2.0.150.  Can anyone tell how to fix this?

  I have the same problem and I don't want to lose my content. App Apple Software Update doesn't work

• Error message: Windows Media Player could not complete burning because the disc is not compatible with your player...

  I have one of the same type of disc engraved the other day without problem. Tried to burn a CD today the progress achieved 99%, then I got the error message. Windows Media Player could not complete burning because the disc is not compatible with your drive. Try to insert another type of recordable media or use a disc that supports a write speed that is compatible with your drive.

  Hi David,

  Thank you for giving us the opportunity to help you with this problem.

  According to the problem description, you were not able to burn a DVD with Windows Media Player.

  You get the error that the disc is not compatible with your drive.

  Let me ask you a question.

  (1) what is the type of DVD or CD you want to create?
  (2) don't you make changes to your computer before this problem?

  I would suggest a few troubleshooting methods. Run the Windows Media Performance troubleshooting tool and follow the steps in the link to burn a CD or a DVD.

  Method 1: Run Windows Media Player Performance convenience store.

  Please follow the steps below to do so.

  (a) key Windows + W keys on your desk.
  (b) write the Troubleshooting in the search box in the upper right.
  (c) select the Troubleshooting option after the search.
  (d) select the option of Performance of Windows Media Player .
  (e) click Next to perform the resolution of the problems of performance of Windows Media Player and follow the steps.

  Method 2: Follow the steps in the link here and burn the CD or DVD.

  Burn a CD or DVD in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-8/burn-CD-or-DVD-Media-Player

  I hope that solves your problem. Please feel free to write back to us, if you are facing any problem related to Windows.

• MSG for error in Windows 7: "unable to load DLL 'Gpib - 32.dll': the specified module could not be found."

  Hi people, I have a project in VB. NET (VS2010 specifically), which has been updated from an old VB6 project. The old project

  use Niglobal.bas and Vbib - 32.bas to communicate with the GPIB plugged into one of our litters.
  Now in the 64-bit Win7 with the Niglobal.bas and the Vbib - 32.bas converted to Niglobal.vb and Vbib - 32.vb,.

  I get an error when debugging to

  Public void RegisterGPIBGlobals()

  in the Vbib - 32.vb, the error msg says:

  Unable to load DLL 'Gpib - 32.dll': the specified module could not be found. (Exception from HRESULT: 0x8007007E)

  It seems like this Gpib - 32.dll, that I found under SysWOW64 on my Win7 is not designed for a 64-bit application and when I copy this dll file on

  C:\Windows\System32, the msg of error becomes:

  An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B)

  So I think my question is double: 1. the drafting of my own app in VB. NET can I still use Gpib - 32.dll (including the Niglobal.vb and Vbib - 32.vb)?

  2 Will the application I am writing with .NET work in x 64 Windows 7?

  The Almighty gurus and Mods please help. Thank you!

  Hi Joel, thanks for the answer! I have the 3.0.2 driver.

  I was looking around for a while after I posted here and further in the use of NI4882 manual, page 4-4, I found this:

  «To bring an application in an environment 64-bit requires the application to migrate the NI4882 API and be recompiled.»

  So I'm ditching the gpib - 32.dll (vbib - 32 & niglobal) and currently I am using NI4882.dll and restructuring of my project.

• nianlys.dll could not be found on Windows 7

  I'm having trouble installing my application on a particular computer. I sent this request several times on a number of computers, but in this particular case, I get an error when you run the program-

  "System.DllNotFoundException: unable to load DLL 'nianlys.dll': the specified module could not be found." (Exception from HRESULT: 0x80070007E)

  • I made sure that nianlys.dll is present in C:\Program Files (x 86) \National Instruments\Shared\Analysis.
  • I made sure that libiomp5md.dll and LV110000_BLASLAPACK.dll, mkl.msm files, are present. nianlys.dll also has a dependency on nimetautils.msm, but I do not know what DLLs are included in this.
  • I made this program is installed by running setup.exe as administrator (as opposed to run the .msi file that is generated, see here).
  • I assured that the computer in question is aware of updates of .net framework via windows update.
  • I tried to reinstall the program several times, sometimes with a newly recompiled Installer.
  • I tried to add in the 64-bit nianlys.msm in the Setup manually - project this generates an error because the project's TargetPlatform property Installer is set to x 86. The 32-bit version is, of course, already present in the detected dependencies.
  • Interestingly, taking a copy of nianlys.dll to C:\Program Files (x 86) \National Instruments\Shared\Analysis and insertion in the directory that the program is installed in throws up a different error - in this case, the error is "an attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B) ».
  • Take a copy of the 64-bit version of nianlys.dll from another computer (default location C:\Program NIUninstaller Instruments\Shared\Analysis) and by inserting in the directory that the program is installed in throws a third type of error - ' System.DllNotFoundException: unable to load DLL 'nianlys.dll': a dynamic link library (DLL) initialization routine failed. " (Exception from HRESULT: 0x8007045A) ». It is worth noting that this .dll was present before installing the program on the machines that the program works, but is not * present on the target computer, throwing problems.
  • Taking the same 64-bit nianlys.dll and insert it in the location that it was found on another computer, C:\Program NIUninstaller Instruments\Shared\Analysis, do not resolve the original error.
  • Interstingly even more, I have tried to reproduce the error on a computer on which the program is running - remove the x 64 version of nianlys.dll get the original HRESULT: 0x80070007E error, while remove the x 86 version is a Windows Installer appear when you run the program.
  • On a computer on which the program works without any problem, windows Task Manager does not appear to indicate that the program is 32-bit (with the * suffix 32 on the name of the program), despite the platform target to x 86 value.

  It seems all that there is a problem with the nianlys.dll used in both the x 64 and x 86, despite the target platform versions only being x 86. I'm really running out of ideas on this sort of thing I could try to fix this problem, any help would be most appreciated.

  Okay, problem has been resolved - see the solution to the overflow of stack here. Basically, the program was running 64-bit instead of 32-bit, and as a result of the x 64 nianlys.dll and Associates x 64 dependencies were absent.

• Windows Mail error message: "some of the files could not be found and could not be attached to the message." You want to send the message anyway? »

  original title: end this message appears "some of the files could not be found and he could not be attached to the message." You want to send the message anyway? "I am running Windows Vista Home Basic Edition
  Hello
  I'm so frustrated, this problem has arisen at a very bad time!

  I started to use Windows Mail a few months ago and have had no problems so far, since Thursday night, every time that I attach a file to an e-mail message when I click on send this message 'some files was not found and could not be attached to the message. You want to send the message anyway? "I am running Windows Vista Home Basic Edition.

  Thank you

  Hello

  Method 1:
  You can perform the steps of troubleshooting from the link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  Method 2:
  You can check if the default e-mail program is selected, follow the steps to do this:
  a. go to: Control Panel and go to default programs. Select Configure programs and Computer Defaults b. Select continues if the permissions window will appear
  c. left, double-click Custom, under Choose a default e-mail program, select Windows Mail.
  d. click Ok and close.

  Method 3:
  If none of the above steps are useful, then try to perform the system restore to the date when it was working fine.
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  NOTE: System Restore does not affect personal files, such as e-mail, documents, or photos, so it cannot help you restore a deleted file. If you have backups of your files, you can restore files from a backup.

  Method 4:
  If the file you are trying to download is opened, then it will not download, you can close the file completely and then try to download.

   

• When you try to upgrade Windows Vista to Windows 7 I get this error: "Windows could not retrieve information about the disks on this computer."

  original title: problems of Windows update/upgrade

  I'm currently trying to install Windows 7 on my desktop running Vista.

  Whenever I run the Setup it comes up with the following error: Windows could not retrieve information about the disks on this computer.
  I already put the virtual disk on auto and rebooted several times. I get the same error.
  Also, I tried to update my computer by using the windows update thinking that would help... Windows update decides to not work either! It comes up with the error: Windows Update cannot currently check the updates, because the service is not running. You may have to restart your computer.
  gain, I restarted and it still does not work.
  I am currently running Windows Vista 32 bit on my desk (I thank God for my laptop!).

  Help!

  First, run Windows 7 upgrade advisor:

  Windows 7 Upgrade Advisor
  http://Windows.Microsoft.com/UpgradeAdvisor

  Note the results and make sure to follow the steps.

  Try to install Windows 7 using the USB

  Install Windows 7 with a USB memory key
  http://www.winsupersite.com/article/Windows-7/install-Windows-7-with-a-USB-memory-key

• Setup could not find all of the products available for installation. Windows Update suggests to install 125KO Office 2007 SP1 repeatedly.

  Hello!
  Update for Windows Vista x 64 to Windows 7 x 64 caused the following errors:
  By clicking on the "Edit" button in "Programs and features" with Office 2007 trial selected gives an error "Setup error".
  Setup could not find all of the products available for installation. Please contact your systm administrator. "in Windows 7 x 64. Run the installation of Office 2007 trial version downloaded the file to change the components OK works.
  How to operate the button "Edit"?
  Windows Update suggests to install 125KO Office 2007 SP1 repeatedly. I agree to install each time, updates installs "successfully", but suggest Windows Update to install next time. It started to happen after uninstallation and reinstallation of Office 2007.
  Kind regards
  Dima

  125 KB is obviously not a ServicePack because this would be much MB in size, you have a number of KB (knowledge base) to go with the annoying update?

  How to use a Setup log file to troubleshoot installation in Office
  http://support.Microsoft.com/default.aspx/KB/826511

  How to read the Windowsupdate.log file
  http://support.Microsoft.com/kb/902093#appliesTo

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive.  If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

  As for the "Changes" problem that I have no real solution for this, only that you remove every bit of desktop of your machine and everything don't reinstall desktop applications you need.  It could be a corrupted registry which is behind this problem.

• Since the introduction of Windows 7 at startup I get the following original error-The 345 could not be located in the dynamiclink Library COMCTL.dll.

  Since the introduction of Windows 7 at startup, I get the following error - gnotify, exe the orginal 345 could not be located in dynamiclink Library COMCTL.dll. It gives me no options I try to get out and it takes several attempts to cancel, then, when it's a small login to my gmail page appears I connection and have no problem more until the next day when I start my computer to start all over again. I also had a horse of course for my pointer I can't find this option in Win 7 selection but I'm really now trying to figure how to set the error thanks all help appreciated

  Upgrade to Win7 has nothing to do with the Windows Update feature. Please repost your question in the support forum: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft