Windows 7 7600 compilation is ok?

Similar Questions

• Windows SDK RegGetValue compiles but does not run program

  I'm porting software from another library that I have that uses native Windows. After writing a small test NI CVI 9.0 program, I found that the RegGetValue() function when it is used, translates into a program that does not work (will not yet be debug with an error on files not being is not in the path). Delete this single line and it works where it is supposed to.

  CVI9 programming interface Toolbox has a function to read the registry, but why it will work with the standard Windows SDK? Is it possible that I can get RegGetValue() to work as documented by MSDN in CVI?

  I tried including ADVAPI32. LIB and ADVAPI32_LVRT. LIB and no work (in the folder lib/MSVC)

  It worries me that the WinSDK is not compatible with CVI and I don't know where I can find this information on the compatibility.

  Thank you

  Jason.

  What operating system do you use? According to MSDN, minimum supported OSs are Windows Vista and Windows XP Professional x 64. The same paper suggests on Win XP SP2 to use SHRegGetValueinstead. You can also watch RegQueryValueEx statement.

• Impossible to compile the driver for windows in MDF

  I'm trying to use the windows driver instead of the Adobe driver by selecting the windows default printer 'use' in the target presentation window and recompiling, but apparently return to the target presentation printer Agent.

  I select the default windows printer and click ok:

  

  If I open immediately the objectives of the presentation, he shows that he did not save my selection because it always shows the selected Adobe presentation.

  

  Just in case it did, in fact, compile with the windows driver, I go ahead and compile to a new MDF and run jfmerge with the following command line:

  JFMerge mypo.mdf mypo.dat mypo.pcl - aiijfmerge.ini - zmypo.pcl - allmypo.log - auwpon - aspWindows

  This is what appears in the log:

  2009-11-04 12:13:30 jfmerge: [125] * processing data file: 'mypo.dat. '
  2009-11-04 12:13:30 jfmerge: [289] 'mypo.mdf' MDF file opens.
  2009-11-04 12:13:30 jfmerge: [247]'Windows' printer driver has not has been compiled in this MDF.
  2009-11-04 12:13:30 jfmerge: [210] nothing has been printed.

  Can someone do the light on how to get the Windows printer driver compiled in my mdf?

  Thanks in advance for any help!

  Phil

  Windows drivers and Agent print drivers are mutually exclusive.  In the design tool, under objective presentation select "Use print agent presentment target" and then select "clear all".  Then go back and select the windows drivers.

  see you soon

  c

• Look at the auto window

  CVI 2013 SP1.

  I added a few variables in the Watch window and each compilation of debug config, window spy himself is the stuffing with duplicates of this variable.  See attachment. As you can imagine, this project becomes slower and slower to debug.  And there is no "Select all" feature in the Watch window to remove them all.

  

  Hello ElectroLund,

  Would it be the same issue as in this post: http://forums.ni.com/t5/LabWindows-CVI/duplicate-watch/td-p/2893688 ?

  Constantin

• DELL BLUETOOTH minicards 370 PILOTS does not not on windows 7

  Latitude E6500

  Windows 7 7600, 64-bit

  Please all help

  Hey, guys I finally receive w I was looking for: updated drivers AND WORK for my LATITUDE E6500, WORKS ALSO on LATITUDE E5500 DELL Bluetooth minicards 370 running on Windows 7 Ultimate (7600) 64-bit.

  Broadcom BRM2045 and BRM2046

  Driver 6.2.0.9700 Bluetooth version

  Driver version Bluetooth 6.2.1.100 working tested

  Driver version 6.2.1.500 Bluetooth working tested

  links below

  http://rapidshare.com/files/265378263/BTW_6.2.0.9700.rar

  http://support.gateway.com/support/drivers/search.asp?param=Bluetooth&St=kW

  Note: Although the second link goes to the gateway support, these are the original of Broadcom drivers (the manufacturer of the bluetooth on your mini-map chip) then they'll work as TESTED

• security problems of windows in my computer

  I have a message on my screen that says windows 7 7601 compilation this copy of windows is not original

  Want to message I need to validate my windows by sending the register number using their directions

  I have can´t the report as bad intention, because the computer shut down my internet comunication wiriting white

  How can I eliminate it?     I bought my computer 5 years ago and works very well untoil 1 month ago

  Hi Gabriel,

  To resolve your concern, we found a useful solution since a thread answered by Andre Da Costa on this link: Windows 7 build 7601 this copy of Windows is not genuine.

  Kind regards.

• Windows 7 suddenly slow and System Idle process CPU utilization a concern

  Almost overnight, my Sony Vaio with Windows 7 (bought in 2010) has worked incredibly slow.  I tried to update the computer with the automatic updates of Windows and the Service Pack 1 could not install many times.  So, I installed the system update readiness tool.  Then I tried to install the SP again and it worked (I was also able to install SP2 and other updates at this point).  But, these downloads and installations took longer than they should have and my computer continues to lag when I'm trying to do something.  Norton AntiVirus found no problem.  I've only used about 20 percent of the memory.  System Idle Process is using high CPU, even when I try to use other programs such as IE and Google Chrome.  The computer fans work diligently as if the computer tries to run, but everything is going so slow that the computer is almost useless.

  The computer is almost three years old, but did not have something else installed Norton because I bought the new computer.  It has been used daily for almost three years without problem.  I do a lot but check Windows Live Mail, and then type the documents in Word format - literally that's all; no other programs, games, etc.  However, I have an error code a few months back: 'Not authentic Windows, Build 7600.'  In response to the error, I got my product key and verified the program and to use new Windows 7.
  Anyone know why the system idle process continues to consume so much CPU even when I try to open a web browser?  Even when the computer is inactive, the fans are running full speed and the computer becomes warm to the touch.  It seems that no matter what the computer is doing, it is lagging behind and struggling.  Even if I just want to open the start menu, it takes a few seconds for the computer to respond.
  Thank you!

  It is not dust but the crapware that you must get rid.  The first suspect is Norton, which is a terrible software that slows down terribly computers.  Get rid of Norton and install Comodo Internet Security instead.  Make sure that when you get rid of the plague of Norton, you get the Norton Removal tool and run twice.  Also, make sure that manually enter you your folder program files and delete all Norton and Symantec files and use a program like Malwarebytes file Assassin to get rid of the persistent process who do not want to delete.

  Then use CCleaner (and ONLY CCleaner - do not download or install any other system cleaners or registry mechanic) for cleaning your system and use Revo Uninstaller to remove any extra crapware that is installed on your machine.  Be sure to remove any software from Apple and get rid of all Windows Live software.

  Finally, you'll want to disable several Windows processes that eat up RAM unnecessarily.  These include Sync Windows, Windows Defender and Windows Action Center.

  Follow all the advice and you should find that your computer is running a lot faster.

• Problem with compiling QT application

  Hi people,

  Palybook is in general a nice tab, my wife a QA test lead on our society and she's like to test the new application and material, but after 1.5 hours of research, I look at and test drive android is crashes WOW... real QA. QNX works very well.

  But, I'm a developer, and I have a strange problem with QT env for Simulator playbook.

  I use manual http://wiki.qt-project.org/QNX to build qt for qnx env.

  Any compilation fine and installed in the directory prefix as well.

  Then I prepare simple program ' Hello world ' to test whether anything can build successfully.

  My system is gentoo with kernel 3.2.12

  my project as:

  /home/miha/playbook_simulator_2_0/qt/x86/bin/qmake -project
  
  which qcc
  /home/miha/playbook_simulator_2_0/bbndk-2.0/host/linux/x86/usr/bin/qcc
  
  which make
  /home/miha/playbook_simulator_2_0/bbndk-2.0/host/linux/x86/usr/bin/make
  

  chain of QCC

  qcc -Vgcc_ntox86 -c -fstack-protector -fstack-protector-all -Wno-psabi -O2 -Wall -W -D_REENTRANT -DQ_OS_BLACKBERRY -DQT_NO_DEBUG -DQT_GUI_LIB -DQT_CORE_LIB -DQT_SHARED -I../../x86/mkspecs/unsupported/blackberry-x86-qcc -I. -I../../x86/include/QtCore -I../../x86/include/QtGui -I../../x86/include -I. -I. -I../../../bbndk-2.0/target/qnx6/usr/include -I../../../bbndk-2.0/target/qnx6/usr/include/freetype2 -o main.o main.c
  

  QNX variable:

  QNX_CONFIGURATION=/home/miha/.rim/bbndk
  QNX_TARGET=/home/miha/playbook_simulator_2_0/bbndk-2.0/target/qnx6
  QNX_HOST=/home/miha/playbook_simulator_2_0/bbndk-2.0/host/linux/x86
  

  and have a strange output in the console: (~ 2700 output lines)

  In file included from ../../x86/include/QtCore/qobjectdefs.h:45,                 from ../../x86/include/QtCore/qobject.h:47,                 from ../../x86/include/QtCore/qcoreapplication.h:45,                 from ../../x86/include/QtGui/qapplication.h:45,                 from ../../x86/include/QtGui/QApplication:1,                 from main.c:1:../../x86/include/QtCore/qnamespace.h:54: warning: return type defaults to 'int'../../x86/include/QtCore/qnamespace.h: In function 'QT_MODULE':../../x86/include/QtCore/qnamespace.h:54: error: expected declaration specifiers before 'namespace'../../x86/include/QtCore/qnamespace.h:1799: error: expected declaration specifiers before 'Q_DECLARE_OPERATORS_FOR_FLAGS'../../x86/include/QtCore/qnamespace.h:1820: error: expected declaration specifiers before 'class'../../x86/include/QtCore/qnamespace.h:1875: error: expected declaration specifiers before ';' tokenIn file included from ../../x86/include/QtCore/qobject.h:47,                 from ../../x86/include/QtCore/qcoreapplication.h:45,                 from ../../x86/include/QtGui/qapplication.h:45,                 from ../../x86/include/QtGui/QApplication:1,                 from main.c:1:../../x86/include/QtCore/qobjectdefs.h:51: error: expected declaration specifiers before 'QT_MODULE'../../x86/include/QtCore/qobjectdefs.h:55: error: expected declaration specifiers before 'class'../../x86/include/QtCore/qobjectdefs.h:143: error: expected declaration specifiers before 'template'../../x86/include/QtCore/qobjectdefs.h:146: error: expected declaration specifiers before 'template'../../x86/include/QtCore/qobjectdefs.h:217: error: expected declaration specifiers before 'Q_CORE_EXPORT'
  
  . . . . . . . . . .
  

  Can someone help me with this? or someone knows what is happening and how to fix this strange situation?

  Mike.

  Have you tried to compile it in Qt Creator?

  And did you use Qt download on: http://openbbnews.wordpress.com/2012/03/29/qt-update-2/

  There is no real need to compile by yourself

  SRY, I could not help you directly, cause I use Windows XP to compile for Playbook. The Linux installer does not work with my 32-bit Kubuntu.

  [edit]

  found this:

  http://StackOverflow.com/questions/7512433/error-expected-declaration-specifiers-before-namespace

  [/ Edit]

• error code 0xC004E003 when trying to activate Windows 7

  original title: 0xC004E003 error code
  I have problems trying to activate my windows 7 7600 32-bit. whenever I insert my product key, it gives me the error 0xC004E003 code. How should I do?

  Please contact support for Microsoft Windows 7 .

  Carey Frisch

• blue screen nvlddmkm.sys for nVidia GeForce 9500 M on studio dell XPS 1340. recently upgradeed to windows 7, fine for a while but now cela and has many problems: BSOD, freezing, CPU utilization more... I DO __HOW FIX IT?

  Hi, well bad get right to it. I have a dell studio XPS 1340 and have recently upgraded to Windows 7 last week. everything was fine until last Monday. When I switched high performance mode for my battery, my nVidia card also goes to Boost Performance. but this time, I got a blue screen with this:

  nvlddmkm.sys

  PAGE_FAULT_IN_NONPAGED_AREA

  Since then I tried to update the video driver from the dell site and even the nVidiasite. one of them gives me a blue screen as soon as I get to the windows login screen. and the other divides my GeForce 9500 M into its two parts > GF 9400 MG + GF 9200 AMS. When this happens, I can't use the nvidia Control Panel and I can't go to boost performance. I have uninstalled and installed these drivers in safe mode too, but no luck. I system restored before the weekend, when everything was fine, but still the same problem. so now, I have the driver 8.15.11.8633 version

  other side effects I've noticed is that Skype does not work either. When I first upgraded to win 7, Skype has worked well. but now, when I run a video or normal call, my computer completely freezes. In addition, the games I play seem to decrease in performance. I used to be able to play very good Burnout Paradise, but now there is a significant drop in fps. also, the computer seems to use more cpu and heats more quickly. The battery life has decreased too. and when I use windows media center to connect with my xbox360, my phone freezes when I try to access a video.

  I tried the diagnostics start and the only problem was:

  Error code: 0F00:133 media suitible C Msg:No drive is present

  and today, I used the windows debugger and it came with it. im sure this is good information, but I don't know how interperate it. Please help and thanks in advance!

  Microsoft (R) Windows debug 6.11.0001.404 AMD64 Version
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [C:\Windows\Minidump\111409-21434-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol search path is: SRV * c:\debug_symbols* http://msdl.microsoft.com/download/symbols
  Executable search path is:
  The kernel version of Windows 7 7600 SQUARE free x 64
  Product: WinNt, suite: TerminalServer personal TerminalServer
  By: 7600.16385.amd64fre.win7_rtm.090713 - 1255
  Computer name:
  Kernel base = 0xfffff800 '02e0d000 PsLoadedModuleList = 0xfffff800' 0304ae50
  The debugging session: 11:03:52.777 sat 14 Nov 2009 (GMT-5)
  System Uptime: 0 days 1:03:33.572
  Loading the kernel symbols
  ...............................................................
  ................................................................
  .......................................
  Loading user symbols
  Loading unloaded module list
  .......
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Bugcheck 50, {fffff88007000000, 0, fffff880047d5b1e, 0}

  Cannot load the image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, 0n2 error Win32
  WARNING: Unable to verify timestamp for nvlddmkm.sys
  ERROR: Module load completed but symbols can be loaded for nvlddmkm.sys

  Could not read the name of the problem driver
  Probably caused by: nvlddmkm.sys (nvlddmkm + 135b1e)

  Follow-up: MachineOwner
  ---------

  KD >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  PAGE_FAULT_IN_NONPAGED_AREA (50)
  Invalid system memory was referenced.  This cannot be protected by try-except,
  It must be protected by a probe.  In general, the address is simple bad or it
  pointing to freed memory.
  Arguments:
  Arg1: fffff88007000000, memory referenced.
  Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
  Arg3: fffff880047d5b1e, if not zero, the address of the instruction that refers to bad memory
  address.
  Arg4: 0000000000000000, (reserved)

  Debugging information:
  ------------------

  Could not read the name of the problem driver

  READ_ADDRESS: fffff88007000000

  FAULTING_IP:
  nvlddmkm + 135b1e
  fffff880'047d5b1e 8b 0488 mov eax, dword ptr [rax + rcx * 4]

  MM_INTERNAL_CODE: 0

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

  BUGCHECK_STR: 0 X 50

  Nom_processus: System

  CURRENT_IRQL: 0

  TRAP_FRAME: fffff88009d7fdf0-(.trap 0xfffff88009d7fdf0)
  NOTE: The frame trap does contain not all registers.
  Some registry values can be set to zero or incorrect.
  Rax = fffff88007000000 rbx = 0000000000000000 rcx = 0000000000000000
  RDX = fffffa80057a7270 rsi = 0000000000000000 rdi = 0000000000000000
  RIP = fffff880047d5b1e rsp = fffff88009d7ff88 rbp = 0000000000000000
  R8 = 0000000000000000 r9 = 0000000000000000 r10 = 0000000000000003
  R11 = fffffa80057a7298 r12 = 0000000000000000 r13 = 0000000000000000
  R14 = 0000000000000000 r15 = 0000000000000000
  iopl = 0 nv up ei pl zr po nc
  nvlddmkm + 0x135b1e:
  fffff880 '047d5b1e 8b 0488 mov eax, dword ptr [rax + rcx * 4] ds:5110:fffff880' 07000000 =?
  Reset the default scope

  LAST_CONTROL_TRANSFER: from fffff80002efe1e4 to fffff80002e7ef00

  STACK_TEXT:
  "fffff880 '09d7fc88 fffff800' 02efe1e4: 00000000'00000050 fffff880 ' 07000000 00000000 00000000' fffff880 ' 09d7fdf0: nt! KeBugCheckEx
  fffff880 '09d7fc90 fffff800' 02e7cfee: fffff880 00000000'00000000 00000000'00000000 00000000'00000000 ' 047d60b0: nt! : FNODOBFM: 'chain' + 0 x 42907
  fffff880 '09d7fdf0 fffff880' 047d5b1e: fffff880'04824f5e fffff880'04 c 72260 00000000'00000000 00000000'00000001: nt! KiPageFault + 0x16e
  fffff880 '09d7ff88 fffff880' 04824f5e: fffff880'04 c 72260 00000000'00000000 00000000'00000001 00000000'00000000: nvlddmkm + 0x135b1e
  fffff880'09d7ff90 fffff880'04 c 72260: fffffa80 00000000'00000000 00000000'00000001 00000000'00000000 ' 04ef9000: nvlddmkm + 0x184f5e
  fffff880 '09d7ff98 00000000' 00000000: 00000000'00000001 00000000'00000000 fffffa80 '04ef9000 fffffa80' 057a 7270: nvlddmkm + 0x5d2260

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  nvlddmkm + 135b1e
  fffff880'047d5b1e 8b 0488 mov eax, dword ptr [rax + rcx * 4]

  SYMBOL_STACK_INDEX: 3

  SYMBOL_NAME: nvlddmkm + 135b1e

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: nvlddmkm

  Nom_image: nvlddmkm.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 4a4fbef6

  FAILURE_BUCKET_ID: X64_0x50_nvlddmkm + 135b1e

  BUCKET_ID: X64_0x50_nvlddmkm + 135b1e

  Follow-up: MachineOwner

  Hi anchit02,

  Thanks for posting.

  The page fault has a high probability to be RAM or hard drive related.

  You can test the computer memory using the memory diagnostic tool.

  You can start the memory Diag tool by clicking the ORB start and type 'Memory diagnostic tool' in the search box, clicking on the entry that is displayed.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows is not genuine problem and activation problem

  Dear Sir.

  I use windows 7 Professional 32-bit original one. But now it shows bulild Windows 7 7600 this copy of windows is not genuine. When I tried to enter my product key, I can't access it, showing the error message"Windows cannot access the file or the specified device path, you don't have permission to apporpreate to access the item 'C:zWindows\system32\slui.exe.

  How can solve this problem, please advice me to solve.

  If one is facing the same problem please answer me

  forward your support...

  Thanks in advance.

  Faris

  First, run the RemoveWAT software, once again using the RestoreWAT function.

  Can change the key for that on your sticker COA - asssuming it is for professional Win7.

  If it is for a different version or edition of Windows, you will need to reformat and reinstall using a Dell recovery media.

• Fake copy of Windows has appeared on my PC

  A fake Windows 7 Ultimate appeared on my computer in the last 3 weeks.  My screen is black and in the bottom right of my office are the words "Windows 7 7600 Build.  This copy of Windows is not genuine ".  (My geniune operating system is Windows 7).  I'm curious to see if there is anything I can do to get rid of myself.  In addition, in case it is important, I don't have an original windows CD to reinstall.  If it is something that is necessary,... is my second question there a way to recover my product via my computer key or by contacting Windows (if I have my computer s/n)?  Thanks for any help you are able to give.

  Your installation is a counterfeit.

  You have the infamous Lenovo stolen key installed on a HP with a Dell SLIC table shwoing machine into BIOS >-that just may not happen unless a hacker Activation exploit installed bypass activation and vlaidationrequirements.

  The hack was discovered, and that's why you got the non-genuine opinion.

  You must reformat/reinstall after saving your data on external media, using the manufacturer's recovery media.

• My microphone does not work with anything on windows 7... Also I am missing stero mix... What continues?

  OK so I just installed windows 7 7600... and when I try to use my mic for anything whatsoever that it does not work.

  By recording the microphone bar right does not move... I tried to play with the settings... that no longer works. Also, Miss me the stereo mix option.

  I can hear sounds ok, but my microphone does not work.

  I use a SupremeFX X - FI.

  Any help guys? I really need my microphone to work.

  Thank you.

  On your option of stereo mix... it is hidden by default.

  See http://www.papajohn.org/Win7-Setup.html of my website page to activate it. PapaJohn www.papajohn.org

• Reinstall windows media player

  I am running windows 7 Home Premium on my PC and do not remember the last time I used it (if ever), but I recently tried and when I click on windows media player I get the following message. "The file wmploc.dll has a version number of 12.0.7601.17514 where 12.0.7600.16667 was expected. Windows media player is not installed correctly and must be reinstalled. You want to install the player from the Microsoft website? »

  It has no option to download on the Microsoft site, so how can I solve this problem?

  I checked my wmploc.dll and there are four copies in different places in the C:\Windows folder.  Each copy has the same version number, you have - 12.0.7601.17514

  I also checked my version of Windows in a command prompt by typing

  worm

  and my Windows Version 6.1.7601.

  Would you check your version of Windows in this way as well because it could reveal the cause of the problem.  I'm no expert in versions but I have seen references to the 7600 versions in a few discussions about pre-release ["RTM" versions rather than the final versions] builds or MSDN.  My Win7 Home Premium is for SP1, so what might explain the difference as far as I know.

  If the unloading-reloading procedure does not resolve the problem & if your version of Windows is 7600 then I think you should post a new question with the version of Windows in the title so that someone who knows these things interfere.

• Forms running in Windows for development

  Hi gurus
  My EBS 11.5.10 is on a Linux machine. Develop a new form is a slow task because I change the form in Windows and then send to Linux via FTP and compile it there, just for a few tests. For me this a very heavy work.
  Is it possible to fix this?
  While trying to launch the form in Windows, I downloaded the directory on my PC and now I want to compile all the PLL files in the directory of resources, but APPCORE.pll gives me this error:
  
  Errors of compilation on APP_EXPORT:
  PL/SQL ERROR at line 0, column 0 0
  [ORA-00600: internal error code, arguments: [17003], [66331644], [1012], [1], [], [], []]
  Could not generate the library.
  FRM-30312: unable to compile the library.
  
  I have compile PLL files with this:
  ifcmp60 Module = APPCORE.pll Userid=apps@TEST/xxxxxx Module_Type = LIBRARY package = YES
  
  What I am doing wrong?
  My idea is crazy?
  Is this possible?
  
  Thanks for your replies
  Oscar

  Oscar,

  Theoretically, you should be able to run a form in windows if you compile WBF and any files of the pll.
  Is this correct?

  Fix.

  What is the question you have now? You can compile the form on the Windows client?

  Kind regards
  Hussein