Windows 7 - > 8 - > 8.1 Upgrade winload.exe missing 0xc0000098 error after upgrade

Similar Questions

• Winload.exe missing or damaged application

  Windows opens with the boot manager asks me to insert the windows installation disc reads the Message on the page windows file: \windows\system32\winload.exe status: 0xc000000e Info: the selected entry could not be loaded because the application is missing or corrupt

  PS: do not have a Setup disk

  > Ps: don't have a Setup disk

  That's not good.
  I think that the system or recovery disk is your last resort.
  If your laptop belongs to the European series of Toshiba you can order this disc here:
  https://backupmedia.Toshiba.EU/landing.aspx

• Re: Satellite A300D: winload.exe missing or damaged

  Hello

  I tried to make my system recovery using F8 and his works, but all of a sudden the battry during the operation failure.
  So I repated steps again after I connect the charger but I couldn't, and I got the message...

  + Windows cannot start. A recent hardware or software change might be the +.
  + talk +.
  + File: \Windows\system32\winload.exe+
  Status: 0xc000000f +.
  + Info: The selected entry could not be loaded because the application is +.
  + missing or damaged. +

  And I have no recovery DVDs to ther restore dvd,
  I need help to solve this problem, if there is an idea?

  My computer laptop satellite toshiba A300D

  Hello

  You mean that you are not able to recover the laptop using the HDD recovery procedure?
  You can begin the HARD drive by pressing F8, choose fix my computer.
  Then a new window should appear and you could choose a new option called Toshiba HDD recovery.

  If this is not possible then I think that you don't have a choice but to reinstall the OS using a Setup (Microsoft or Toshiba) disk.
  If you don t have this disc then you order on this website:
  https://backupmedia.Toshiba.EU/landing.aspx

  See you soon

• Winload.exe missing or damaged

  Hello. I was working to clone my disk to a USB HDD (included). I think I can inadvertently done the USB HDD (empty; no OS) a boot disk. Now, I get the "there has been a change in software/hardware to the system; Winload is missing or corrupted"error and does not start for Vista Business. I can get to quick system via the Recovery Console, but it does show X: and doesn't let me change to C:. It does not show me the C: drive for repair. He asked drivers and try to give him the HARD disk driver, but he doesn't. Any chance to recover from this mess? All orders to make him watch C:? Thanks for your suggestions in advance.

  Resourceful salvation,

  This error occurs when one of the following conditions is true:

  (a) entry Windows Boot Manager (Bootmgr) is not present in the Boot Configuration data (BCD) store.

  (b) the Boot\BCD file on the active partition is damaged or missing.

  You can rebuild the BCD store by using the Bootrec.exe tool in the Windows recovery environment. To do this, follow these steps

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see the link below.

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  (a) put the Windows Vista installation disc or Windows 7 in the disk drive, and then start the computer.

  (b) press a key when you are prompted.

  (c) select a language, a time, a currency, a keyboard or an input method, and then click Next.

  (d) click on repair your computer.

  (e) click the operating system you want to repair, and then click Next.

  (f) in the System Recovery Options dialog box, click command prompt.

  (g) type BOOTREC /REBUILDBCD , and then press ENTER.

  If the command success, please close the command prompt window and restart the computer

  The article below about how to rebuild the Winload.exe. It applies to Windows 7:

  http://support.Microsoft.com/kb/927392

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows vista activation problem product ID and Java (0xc0000005) fatal error after installation of windows vista format.

  Original title: try to put wrong question ID problem!

  Due to problems of Java, I formatted and made a new installation.  My Vista Home Premium says its active.  When I try to put my product id was not found. When I try to leave microsoft to find that they can't pick up my computer and I can't enter by hand, he said its incorrect.   When I try to ask online chat, I cut that they deal with activation problems.  It is activated, I can't get the Web site recognize my product id, so I can post for help?  The world is - that sound familiar at all?

  I have fatal routine Java errors when I play a game Runescape.  I'd appreciate any help anyone could give me. Thank you

  A fatal error has been detected by Java runtime environment:
  #
  # EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc = 0x6d884dca, pid = 3032, tid = 2976
  #
  # Version JRE: 6.0_30 - b12
  # Java VM: Java hotspot Client VM (20, 5 - b03 in mixed mode, sharing windows - x 86)
  # Problematic frame:
  # V [jvm.dll + 0x94dca]
  #
  # If you want to submit a bug report, please visit:
  # http://java.sun.com/webapps/bugreport/crash.jsp
  #

  Hi Verisetti,

  Have you installed security software after formatting windows?

  If so, you can uninstall the security software temporarily and check if you receive the access violation error.

  If the uninstallation of security software solves the problem, you may need to configure the settings of the software of safety accordingly. Please contact the software vendor for assistance in this regard.

  Note: Make sure that you install the security software after the trial.

  What about Windows vista product ID, you can try to validate Windows and check if it helps.

  For more information, see the following articles:

  What is the validation, and how does it work?

  Genuine Windows: Frequently asked questions

• Windows 7 Media Center (64-bit Home Premium) - No. Tuner error after each reboot

  Hello

  I have a tuner HD Homerun first (network connected) running with the latest firmware, and it works very well in Win7 Media Center for most of the time.

  Whenever I restart my computer, I get an error of "No Tuner found" when I try to watch live TV. I have the MC receiver and scheduler services running under the local system account. To resolve this error, I tried many things such as power cycle the tuner HD Homerun first, disconnect/reconnect the tuner of my network router, remove and reinsert the card cable into the tuner, but none of them seem to solve the problem of reliably all the time. While MC gives me this error, the QuickTV utility provided with the tuner can grant and show me the channels.

  Is there a permanent solution to this problem without having to resort to all this groping after every restart?

  Thanks in advance for any help and advice.

  Hi Aro,

  You have reached the end user Microsoft support. The question that you are running in is better suited to the following forum:

  http://experts.Windows.com/FRMS/windows_entertainment_and_connected_home/default.aspx

  Please report if you need additional assistance.

• Upgrade CPU, system does not boot, winload.exe "Windows cannot verify the digital signature for this file.

  Subject pretty much said it all.  I got a new CPU, shut down the computer, installed, and now Win7 does not start.  It hangs on a black screen gripe on a signature file.  Here is the full text:

  "A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source."

  If you have a Windows installation disc, insert the disc and restart your computer.  Click 'Repair your computer' and choose a recovery tool.

  Otherwise, to start Windows, so you can investigate further, press the ENTER key to display the boot menu, press F8 for Advanced Boot Options, select last known good configuration.  If you understand why the digital signature file cannot be verified and want to start Windows without this file, temporarily disable driver signature enforcement.

  File: \Windows\system32\winload.exe

  Status: 0xc0000428

  Info: Windows cannot verify the digital signature for this file. »

  Well, the first thing I did was put in the installation CD and reboot to try the thing "repair your computer".  Charge, said he found a problem, said he has fixed the problem and restarted.  But it always hangs on the same screen of the error.

  So I tried to hit Enter and then F8 as it said to do, but brings me right to the error screen.  I'm stuck, there is nothing that I can do, and I need this computer to work tomorrow.

  Another interesting note is that the recovery on the installation CD tool identifies my system installed Windows Vista... wtf.

  Help?

  I don't know if this post will solve your problem, but it can give you new ideas or angles to try.

  http://www.lifeworldblog.com/computers/Windows-7/Windows-cannot-verify-the-digital-signature-for-Winload-exe

• Winload.exe error on installing windows 7

  I'm trying to upgrade Windows Vista business to Windows7 Professional (the two 32-bit). In the first reboot during installation of windows7, I get an error saying that there is a problem with

  "File: /windows/system32/winload.exe.
  "Status: 0 xC0000001.
  and it recharges vista windows again. Is there a repair for allowing me to install Windows 7? My computer is a laptop / tablet ASUS R1E (convertible). It is more than 16 GB of space in my C drive too.

  Hello

  wrong forum

  It is to install vista, install windows 7

  Here's the forum link windows 7 installation

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install?page=1&tab=all

  and read this

  Windows 7 upgrade advisor

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15

  Windows 7 system requirements

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

• Windows Vista startup in the Boot Manager Windows Im getting the message of File:\windows\system32\winload.exe and this isn't the start of the DVD

  Original title: Windows Vista upgrade to Windows boot disk boot manager is located in the computer but will not start up installation disc

  Im getting the message of File:\windows\system32\winload.exe

  Hi WillieGuyton,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  (3) what is the complete error message you receive?

  (4) what is the number of brand and model of your computer?

  Method 1:

  Step 1: disconnect any external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: Follow the steps mentioned in the link below to access pre - install the system recovery tools.

  How to access the System Recovery Options menu?

  Run the tool to restart system as shown in the link below
  How to use Startup Repair?

  
  Method 2:

  Step 1:

  Set the first boot device in the DVD in BIOS to boot from the Windows Installation DVD. To do this, see the documentation that came with the computer.

  Important: Change BIOS (Basic input output system) /semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Step 2: Follow the steps mentioned in the article below for the restoration of the Boot Configuration database (BCD) store

  Windows no longer starts after you install an earlier version of the Windows operating system in a dual-boot configuration

  http://support.Microsoft.com/kb/919529

• PC needs to be fixed: File:\windows\system32\winload.exe error code: Oxc000000I

  Upgrading to windows 7 8. PC worked fine for 3 months. The last time I turned on the computer would not start.

  After several attempts to "Prepare the automatic repair" screen appeared but never advanced.  The screen with the windows box 4 logo
  with circle of points running just above to prepare the automatic repair, waited for several hours but never changed.
  {1}-j' inserted my disk to repair Windows 8 {(set Bios pour démarrer sur le DVD).}  Note in this step, that I IS NOT select Boot from cd\dvd.
  That's when the error message appears: pc needs to be fixed: File:\windows\system32\winload.exe error code: Oxc000000I
  and you will need to use recovery tools.
  Three options are given: 1. Enter to try agai, 2; F8 for boot options, 2: F9 to use different operating system.
  Enter in any of the three choices just recycled the screen containing the same information.
  {2} - Windows 8 repair disk inserted. This time, I SELECTED Boot from DVD
  PC starts loading the cd [dvd, 4 windows box logo appears on the screen
  Bed cd\dvd for about 3-4 minutes.  Circle of rotation points appear on the screen below the logo box 4.
  at this point the drive HARD blinking led, system in this State remains. I never get to see service options. I waited for hours at a time.
  Produce the same results as step 2 above when I try to use the windows 8 installation disc.
  I'd appreciate any help as to how I can get to the repair, the troubleshhot or advanced options which are supposd to be available.

  Tony Hey,

  Regrettable that the problem exists.

  Seems like a problem in the BIOS settings, it would be good to check with the manufacturer of the PC.

  They might have more insight on this.

• Windows could not start. Winload.exe corrupted

  Been having some problems with my Equius has therefore decide to start, F8 and do a system restore toshiba.

  Started and started to format the drive. All of a sudden he projected blue.

  The problem is now I can not even start until now to get the recovery/restore option. I get: -.

  Windows could not start. A recent hardware or software change might be the
  cause...

  File: \Windows\system32\winload.exe
  Status: 0xc000000f
  Info: The selected entry could not be loaded because the application is
  missing or damaged.

  Not sure how it all works, but I guess that recovery stuff are stored on a separate partition. Problem is I guess you must be able to start to load windows before you even get to do this?

  I downloaded and tried a boot with no joy, and of course vista recovery disk, toshiba provide a vista disk. How the hell can I recover from this situation?

  Hello!

  If you are not able to get in the boot menu for HARD drive recovery, you must use a Microsoft Vista disc to reinstall the OS.
  Or you use the Toshiba recovery disc but I think you forgot to burn the disk because normally you get a message (recovery point) you want to burn the disc.

  However, you can order a Toshiba Toshiba recovery disc directly:
  https://backupmedia.Toshiba.EU/landing.aspx

  Good bye

• help \Windows\system32\winload.exe file is missing or damaged

  Windows does not start, the computer will not load or meet recovery disk, HOW or WHAT DO I NEED TO DO TO FIX PROBLEM

  \Windows\system32\winload.exe SAY FILE IS MISSING OR DAMAGED.

  Hello

  1. what operating system do you use?

  2 did you change on your computer?

  Method 1:

  I suggest you to follow the links and check out them.

  Startup Repair

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  Method 2:

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

• After the installation of Windows Vista, I get this error: winload.exe tries to load a 64-bit application, but this processor is not compatible with the 64-bit mode.

  I recently installed Windows Vista on my Dell Inspiron 6000. This installation is completed successfully, but when I tried to start, I got an error message:

  Winload.exe

  Attempt to load a 64-bit application, however this CPU is not compatible with the 64-bit mode.

  I've been clean installation Windows Vista Home Premium. I already had Windows XP Media Center 2004. What should I do?

  Thank you

  Ryan

  Hello

  Do a clean install of XP with the XP disk provided by Dell, if you.

  http://pcsupport.about.com/od/OperatingSystems/SS/instxpclean1.htm

  If you do not have your XP disk, you can contact Dell and ask them to send you a XP disc.

  They should do this for a small fee.

  You need to change the Boot order to make the DVD/CD drive 1st in the order of startup and startup disk:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Vista installation was able to destroy this option of relocation:

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall XP back on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  A Dell must rely on Ctrl + F11 at STARTUP to reinstall XP

  See you soon.

• PC with Windows Vista does not restart after installing updates, "Windows could not start...". "File:\Windows\system\winload.exe status: Oxcoooooof.

  Last night, I installed Windows updates on my HP Pavilion dv6227cl and now Windows will not boot.  I get the message "cannot start Windows.  A recent hardware or software change might be the cause.  File:\Windows\system\winload.exe status: Oxcoooooof Info: the selected entry could not be loaded because the application is missing or damaged.  I DO NOT have the Windows Setup disc.

  Hello

  I suggest you borrow the CD of windows vista to your friends

  Method 1:

  Step 1:

  I suggest you check in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If you be able to start your computer in safe mode, I'd say make clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to see link and check.

  Error: Windows could not start. A recent hardware or software change might have caused the problem after installing Windows updates

  http://support.Microsoft.com/kb/2674065

• What should I do when my computer is to do the diagnostic test, what happens with missing \windows\system,32\winload,exe?

  Please help my friend

  When my computer is to do the diagnostic test, what happens with \windows\system,32\winload,exe lack what should I do now, it's for a friends computer

  Please see: Missing file \Windows\system32\winload.exe