Windows 7 administraitive functions limited by the SYSTEM. (solution)

Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation.  All rights reserved.
C:\Windows\System32>NT user administrator / Active: Yes
'nt' is not recognized as an internal or external command
operable program or batch file.
C:\Windows\System32>NT administrator \active:yes user
'nt' is not recognized as an internal or external command
operable program or batch file.
C:\Windows\System32 > net user administrator / Active: Yes
System 5 error has occurred.
Access is denied.
C:\Windows\System32 > net user administrator / Active: Yes
System 5 error has occurred.
Access is denied.
C:\Windows\System32>copy
The syntax of the command is incorrect.
C:\Windows\System32 >
TRIED TO RUN A BACKUP, BUT HAS BEEN LOCKED FROM READING AUTO...
Directory of d:\
2010-05-18 05:39 CAMERON-PC
2010-05-18 05:39 MediaID.bin 528
2010-05-18 05:39 restore.ico 101 212
2010-05-18 05:39 130 autorun.inf
3 file (s) on 102 082 bytes
1 dir 56,717,312 bytes free
C:\Windows\System32>start d:\cameron-pc
C:\Windows\System32>start d:\autorun.inf
Access is denied.
C:\Windows\System32>start d:\media.bin
The system does not find the file d:\media.bin.
User AUTHORITY/delete C:\Windows\System32>NET
The syntax of this command is:
NET USER
[username [password | *] [options]] [/ DOMAIN]
username {password | *} / add [options] [/ domain]
username [/ delete] [/ domain]
username [/ TIMES: {both |}] ALL}]
C:\Windows\System32>NET user administrator / Active: Yes SYSTEM cameron *.
The syntax of this command is:
NET USER
[username [password | *] [options]] [/ DOMAIN]
username {password | *} / add [options] [/ domain]
username [/ delete] [/ domain]
username [/ TIMES: {both |}] ALL}]
Directory of C:\Windows\System32
File not found
C:\Windows\System32 > net user administrator / Active: Yes
System 5 error has occurred.
Access is denied.
C:\Windows\System32>dir dir dir
Volume in drive C is eMachines
Volume serial number is F + AG-*.
Directory of C:\Windows\System32
Directory of C:\Windows\System32
File not found
C:\Windows\System32 >
Computer C:\Windows\System32>net of the user
The user name is not found.
More help is available by typing NET HELPMSG 2221.
Config computer C:\Windows\System32>net
The syntax of this command is:
NET COMPUTER
\\computername {/ ADD | / del}
The available commands are:
NET NET ACCOUNTS NET HELPMSG
NET COMPUTER NET LOCALGROUP NET STOP
NET CONFIG NET PAUSE NET TIME
NET CONTINUE NET NET SESSION USE
NET FILE NET SHARE NET USER
NET GROUP NET START, NET VIEW
NET HELP
NET HELP NAMES explains different types of names in the NET HELP syntax lines.
SERVICES of HELP NET lists some of the services, you can start.
NET HELP SYNTAX explains how to read NET HELP syntax lines.
NET HELP command | MORE displays one screen of help at the same time.
Accounts C:\Windows\System32>net
Force user logoff how long after the expiry of the period
? : Never
Minimum password age (days): 0
Maximum password age (days): 42
Minimum password length: 0
Length of the history of maintained password: None
Locking threshold: never
Duration of the lock (min): 30
Lockout observation window (minutes): 30
Computer role: workstation
The command completed successfully.
C:\Windows\System32 > YES SUCCESS! FIRST THING I'LL DO IS? {DO A GEEZE OF DEFAULT PROFILE THAT WAS PROBABLY MUCH MORE DIFFICULT, THEN HE HAS TO BE X-}

Tags: Windows

Similar Questions

  • Why im getting this error: "ORA-22813: value of the operand exceeds the limits of the system.

    HI EXPERTS...

    Please helpme to fix this...

    I have a database of oracle 11g, runnint on a Windows Server 2008:

    Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production

    I have two tables:

    CREATE TABLE UTILS. SEG_ROLES

    (

    VARCHAR2 (12-BYTE) APPLICATION,

    ROL VARCHAR2 (12-BYTE),

    USERS VARCHAR2 (255 BYTE)

    )

    TOGETHER TO DEFINE

    Insert into SEG_ROLES (APPLICATION, ROL, USERS) Values ('MULTIPLAN', 'ADMIN', 'ADMIN');

    Insert into SEG_ROLES (APPLICATION, ROL, USERS) Values ("MULTICLIP", 'CAR01', 'PATY');

    Insert into SEG_ROLES (APPLICATION, ROL, USERS) Values ("MULTICLIP", "CAR02", "FABIOLA, ERIKA");

    Insert into SEG_ROLES (APPLICATION, ROL, USERS) Values ("MULTICLIP", "CON01', 'LUCY, PATY');

    Insert into SEG_ROLES (APPLICATION, ROL, USERS) Values ("MULTICLIP", 'CON02', 'VALERIA');

    COMMIT;

    CREATE TABLE UTILS. SEG_ACCESOS

    (

    VARCHAR2 (12-BYTE) APPLICATION,

    ADMROL VARCHAR2 (12-BYTE),

    VARCHAR2 (20 BYTE) MENU,

    OPCION VARCHAR2 (20 BYTE),

    TYPE VARCHAR2 (5 BYTE),

    OBJETO_MENU VARCHAR2 (40 BYTE),

    ACCESO VARCHAR2 (2 BYTE),

    ROLES_ACCESOS VARCHAR2 (255 BYTE)

    )

    TOGETHER TO DEFINE

    Insert into SEG_ACCESOS (APPLICATION, ADMROL, MENU, OPTION, TIPO, OBJETO_MENU, ACCESO, ROLES_ACCESOS)

    Values ("MULTICLIP", "ADMIN", "ROOMMA", NULL, am', 'm_coloca', the of ', 'CAR01, CAR02');

    Insert into SEG_ACCESOS (APPLICATION, ADMROL, MENU, OPTION, TIPO, OBJETO_MENU, ACCESO, ROLES_ACCESOS)

    Values ("MULTICLIP", "ADMIN", "PUT", "PREVALIDA", "SM", "sm_prevalida", the from ', 'CAR01, CAR02');

    Insert into SEG_ACCESOS (APPLICATION, ADMROL, MENU, OPTION, TIPO, OBJETO_MENU, ACCESO, ROLES_ACCESOS)

    Values ("MULTICLIP", "ADMIN", "PUT", "PRECOLOCA", "SM", "sm_preColocacion", the from ', 'CAR01, CAR02');

    Insert into SEG_ACCESOS (APPLICATION, ADMROL, MENU, OPTION, TIPO, OBJETO_MENU, ACCESO, ROLES_ACCESOS)

    Values ("MULTICLIP", 'ADMIN', 'LOVE', "COLOCACIÓN", "SM", "sm_colocacion", the from ', "CAR01");

    Insert into SEG_ACCESOS (APPLICATION, ADMROL, MENU, OPTION, TIPO, OBJETO_MENU, ACCESO, ROLES_ACCESOS)

    Values ("MULTICLIP", "ADMIN", "PUT", "REGCOLOCA", "SM", "sm_regcoloca", the from ', "CAR01");

    Insert into SEG_ACCESOS (APPLICATION, ADMROL, MENU, OPTION, TIPO, OBJETO_MENU, ACCESO, ROLES_ACCESOS)

    Values ("MULTICLIP", "ADMIN", "LDP", NULL, am', 'm_PLD', the of ', "CAR01, CAR02, CON01 CON02");

    Insert into SEG_ACCESOS (APPLICATION, ADMROL, MENU, OPTION, TIPO, OBJETO_MENU, ACCESO, ROLES_ACCESOS)

    Values ("MULTICLIP", "ADMIN", "LDP", "LN_CONSULTA", "SM", "sm_PLD_LNConsulta", the from ', 'CAR01, CAR02');

    Insert into SEG_ACCESOS (APPLICATION, ADMROL, MENU, OPTION, TIPO, OBJETO_MENU, ACCESO, ROLES_ACCESOS)

    Values ("MULTICLIP", "ADMIN", "LDP", "LN_BARRIDOMASIVO", "SM", "sm_PLD_LNBarridoMasivo", the from ', "CAR01");

    Insert into SEG_ACCESOS (APPLICATION, ADMROL, MENU, OPTION, TIPO, OBJETO_MENU, ACCESO, ROLES_ACCESOS)

    Values ("MULTICLIP", "ADMIN", "LDP", "REP_INICICLO", "SM", "sm_PLD_ReporIniciclo", the from ', 'CON01, CON02');

    Insert into SEG_ACCESOS (APPLICATION, ADMROL, MENU, OPTION, TIPO, OBJETO_MENU, ACCESO, ROLES_ACCESOS)

    Values ("MULTICLIP", "ADMIN", "LDP", "LN_BITACORA", "SM", "sm_PLD_LNBitacora", the from ', "CON01");

    COMMIT;

    - And this point of view:


    CREATE VIEW UTILS. VW_ROL_USER AS

    Select distinct APPLICATION, ROL, trim (column_value) USUARIO

    from (SELECT APPLICATION, ROL, USERS USER

    FROM UTILS. SEG_ROLES

    WHERE IT IS NOT NULL TO USERS

    ORDER BY APPLICATION, ROL

    ) t,.

    XMLTable ((' «' ||)) Replace (USER, ",", "",""). '"'))

    order by APPLICATION, ROL, trim (column_value)

    CREATE VIEW UTILS. VW_ACC_ROL AS

    Select distinct APPLICATION, ADMROL, MENU, OPTION, TIPO, OBJETO_MENU, ACCESO, trim (column_value) ROL

    (SELECT APPLICATION, ADMROL, MENU, OPTION, TIPO, OBJETO_MENU, ACCESO, ROLES_ACCESOS ROL

    FROM UTILS. SEG_ACCESOS

    WHERE ROLES_ACCESOS IS NOT NULL

    ORDER BY APPLICATION, ADMROL, MENU, OPTION

    ) t,.

    XMLTable ((' «' ||)) Replace (ROL, ",", "",""). '"'))

    MENU, TYPE, OPTION, APPLICATION control, trim (column_value)

    CREATE VIEW UTILS. VW_SEG_ACCESOS AS

    SELECT VACR. APPLICATION, VACR. MENU, VACR. TIPO, VACR. OPCION, VACR. OBJETO_MENU, VACR. ACCESO, VACR. ROL, VUSR. USUARIO

    FROM UTILS. VW_ACC_ROL VACR,

    UTILS. VW_ROL_USER VUSR

    WHERE VACR. ROL = VUSR. ROL

    ORDER OF VACR. APPLICATION, VACR. ROL, VACR. MENU, VUSR. USUARIO, VACR. TIPO, VACR. OPCION

    When I ask the last posting, it works fine:

    SELECT VSEG.* IN UTILS. VW_SEG_ACCESOS VSEG

    But when I add conditions:

    SELECT VSEG.* IN UTILS. VW_SEG_ACCESOS VSEG

    WHERE VSEG. APPLICATION = "MULTIPLAN.

    AND VSEG. USER = 'PATY '.

    It generates this error:

    ORA-22813: value of the operand is greater than the limits of the system

    Cause: The value of the object or the Collection was too big. The size of the value might have exceeded 30 k in a context of TYPE, or size may be too large for the available memory.

    Action: Choose a different value, and try the operation again.

    Why?

    Thanks in advance...

    Finally found a SOLUTION at: http://stackoverflow.com/questions/14328621/oracle-10g-splitting-string-into-multiple-rows

    just change the way we create the view using the regexp_substr.

    CREATE VIEW UTILS. VW_ROL_USER AS

    SELECT distinct trim APPLICATION, ROL, (regexp_substr (USERS, ' [^,] +', 1, level)) USER

    FROM UTILS. SEG_ROLES t

    WHERE IT IS NOT NULL TO USERS

    CONNECTION BY instr (USERS, ',', 1, level - 1) > 0

    order by APPLICATION, ROL

    Thank you all

  • I have a valid license for Windows XP key code, so why the system tells me it is not currently active or real?

    Windows has no

    I had to spend my PC this morning. Moving it, I decided to implement a new network card. When I reconnected it all the cables, I plugged my USB mouse on another USB port where it had been plugged in before. The computer is more than 7 years old and I've never had a problem with the front Windows Validation. I have a valid license for Windows XP key code, so why the system tells me it is not currently active or real?

    When Windows checks to see if you have moved your copy of Windows to "another computer", among other things, that his focus on the identification of several strands of material in the computer to see if they are different than when Windows was first installed.  I do not remember the list for now, but I remember that the network card is one of the pieces - and IIRC it is 'valuable' higher than others to reach the conclusion.

    You probably other elements has changed over the past seven years and now Windows has decided to have a "new" computer  Assuming that you haven't changed the motherboard - if you had, you would have had this issue at the time wherever you did--your installation is still legal.  Reactivate using your original license key. It should work online, but you will need to call the number that appears in the error message from re - validate.

  • How to download windows install windows 7 32 bit service. The system (Dell 4500) let me download after xp to 7 upgrade. Involved also does not work.

    How to download windows install windows 7 32 bit service. The system (Dell 4500) let me download after xp to 7 upgrade. Involved also does not work.

    Install W7 sp1.

    Then go to the support page of Dell for your computer and download the audio drivers W7 from there and install them.

    See you soon,.
    Jerry

  • Lineage tracing an SQL error: ORA-22813: value of the operand exceeds the limits of the system

    Hi all

    I started playing with OEMM and I get the following error when I try to 'Trace Data Impact' in an Oracle table. Here's what I do:

    • I created a template and collected a few schemas/tables:

    Capture.JPG

    Capture1.JPG

    • Now when I try to "Trace Data Impact' on the table AP_DEF_STG, I get the following:

    Capture2.JPG

    Capture3.JPG

    Capture4.JPG

    I already tried to create a "Configuration" for her, I tried to text instead of graphics, but the error is the same. If I go to a view of Oracle and do a "track Data Lineage", I get the same error again.


    That someone was already been in this situation? This is the full error trace:


    ({"error": true, "errorMessage": "SQL error during the tracing of lineage: ORA-22813: value of the operand exceeds the limits of the system"})

    ', 'errorType': 'Line error', 'errorCodes': "[LNGTRC_E0016]".

    ","stackTrace":"Error Codes - [LNGTRC_E0016].

    Request - VizModelLineage

    Settings - showInternalObject [false] showNoType [true] showControlLinks [false] startingIds [17 #4723 #0] isBizUI [false] ObjectID [17 #1 #0] showSummaryView [true] collapseLevel [features] resetCache [fake] profile [] showMappingsAsNodes [true] skipCache [false] tracingDirection [3] tracingType [DataLineage] [ReportTree2202015-104855025] originalStartingObject cacheId [17 #4723 #0] viewType actionType [loadlineage] of viewId [ReportTree2202015-104855025] [ModelLineage]

    MITI.web.common.exceptions.LineageUIException: SQL for tracing line error: ORA-22813: value of the operand exceeds the limits of the system

    at MITI.web.common.service.facades.LineageFacadeImpl.getLineageGraph (LineageFacadeImpl.java:284)

    at MITI.flash.tabs.VizModelLineage.getLineageTree (VizModelLineage.java:429)

    at MITI.flash.tabs.VizModelLineage.buildLineageGraph (VizModelLineage.java:356)

    at MITI.flash.tabs.VizModelLineage.performAction (VizModelLineage.java:148)

    at MITI.server.servlets.FlashServlet.doPost (FlashServlet.java:156)

    at javax.servlet.http.HttpServlet.service(HttpServlet.java:646)

    at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)

    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:303)

    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208)

    at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:220)

    at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:122)

    at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:170)

    at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:103)

    at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:116)

    at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:421)

    at org.apache.coyote.http11.AbstractHttp11Processor.process(AbstractHttp11Processor.java:1070)

    to org.apache.coyote.AbstractProtocol$ AbstractConnectionHandler.process (AbstractProtocol.java:611)

    to org.apache.tomcat.util.net.JIoEndpoint$ SocketProcessor.run (JIoEndpoint.java:316)

    to java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:895)

    to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:918)

    to org.apache.tomcat.util.threads.TaskThread$ WrappingRunnable.run (TaskThread.java:61)

    at java.lang.Thread.run(Thread.java:662)

    Caused by: MITI.server.services.lineage.LineageException: (LNGTRC_E0016) SQL error during the tracing of lineage: ORA-22813: value of the operand exceeds the limits of the system

    at MITI.server.services.lineage.database.LineageDataSource.handle (LineageDataSource.java:41)

    at MITI.util.database.CommonDataSource.handleSQLException (CommonDataSource.java:124)

    at MITI.util.database.CommonDataSource.executeTransaction (CommonDataSource.java:83)

    at MITI.util.database.CommonDataSource.executeStatement (CommonDataSource.java:54)

    at MITI.server.services.lineage.impl.LineageImpl.traceLineage (LineageImpl.java:554)

    at MITI.server.services.lineage.common.LineageTracer.traceLineage (LineageTracer.java:1078)

    at MITI.server.services.lineage.common.LineageTracer.traceDataLineage (LineageTracer.java:313)

    at MITI.server.services.lineage.common.LineageTracer.traceTechnicalData (LineageTracer.java:176)

    at MITI.web.common.service.facades.LineageFacadeImpl.getLineageGraph (LineageFacadeImpl.java:245)

    ... 21 more

    Caused by: java.sql.SQLException: ORA-22813: value of the operand exceeds the limits of the system

    at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)

    at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)

    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:206)

    at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)

    at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)

    at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1035)

    at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:194)

    at oracle.jdbc.driver.T4CPreparedStatement.executeForDescribe(T4CPreparedStatement.java:791)

    at oracle.jdbc.driver.T4CPreparedStatement.executeMaybeDescribe(T4CPreparedStatement.java:866)

    at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1188)

    at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3386)

    at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3487)

    at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1374)

    at MITI.util.database.Query.executeStatement (Query.java:45)

    at MITI.util.database.Statement.execute (Statement.java:66)

    to MITI.util.database.CommonDataSource$ 1.run(CommonDataSource.java:50)

    to MITI.util.database.CommonDataSource$ 1.run(CommonDataSource.java:47)

    at MITI.util.database.Transaction.execute (Transaction.java:92)

    at MITI.util.database.CommonDataSource.executeTransaction (CommonDataSource.java:80)

    ... more than 27

    Caused by:

    MITI.server.services.lineage.LineageException: (LNGTRC_E0016) SQL error during the tracing of lineage: ORA-22813: value of the operand exceeds the limits of the system

    at MITI.server.services.lineage.database.LineageDataSource.handle (LineageDataSource.java:41)

    at MITI.util.database.CommonDataSource.handleSQLException (CommonDataSource.java:124)

    at MITI.util.database.CommonDataSource.executeTransaction (CommonDataSource.java:83)

    at MITI.util.database.CommonDataSource.executeStatement (CommonDataSource.java:54)

    at MITI.server.services.lineage.impl.LineageImpl.traceLineage (LineageImpl.java:554)

    at MITI.server.services.lineage.common.LineageTracer.traceLineage (LineageTracer.java:1078)

    at MITI.server.services.lineage.common.LineageTracer.traceDataLineage (LineageTracer.java:313)

    at MITI.server.services.lineage.common.LineageTracer.traceTechnicalData (LineageTracer.java:176)

    at MITI.web.common.service.facades.LineageFacadeImpl.getLineageGraph (LineageFacadeImpl.java:245)

    at MITI.flash.tabs.VizModelLineage.getLineageTree (VizModelLineage.java:429)

    at MITI.flash.tabs.VizModelLineage.buildLineageGraph (VizModelLineage.java:356)

    at MITI.flash.tabs.VizModelLineage.performAction (VizModelLineage.java:148)

    at MITI.server.servlets.FlashServlet.doPost (FlashServlet.java:156)

    at javax.servlet.http.HttpServlet.service(HttpServlet.java:646)

    at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)

    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:303)

    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208)

    at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:220)

    at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:122)

    at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:170)

    at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:103)

    at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:116)

    at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:421)

    at org.apache.coyote.http11.AbstractHttp11Processor.process(AbstractHttp11Processor.java:1070)

    to org.apache.coyote.AbstractProtocol$ AbstractConnectionHandler.process (AbstractProtocol.java:611)

    to org.apache.tomcat.util.net.JIoEndpoint$ SocketProcessor.run (JIoEndpoint.java:316)

    to java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:895)

    to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:918)

    to org.apache.tomcat.util.threads.TaskThread$ WrappingRunnable.run (TaskThread.java:61)

    at java.lang.Thread.run(Thread.java:662)

    Caused by: java.sql.SQLException: ORA-22813: value of the operand exceeds the limits of the system

    at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)

    at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)

    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:206)

    at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)

    at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)

    at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1035)

    at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:194)

    at oracle.jdbc.driver.T4CPreparedStatement.executeForDescribe(T4CPreparedStatement.java:791)

    at oracle.jdbc.driver.T4CPreparedStatement.executeMaybeDescribe(T4CPreparedStatement.java:866)

    at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1188)

    at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3386)

    at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3487)

    at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1374)

    at MITI.util.database.Query.executeStatement (Query.java:45)

    at MITI.util.database.Statement.execute (Statement.java:66)

    to MITI.util.database.CommonDataSource$ 1.run(CommonDataSource.java:50)

    to MITI.util.database.CommonDataSource$ 1.run(CommonDataSource.java:47)

    at MITI.util.database.Transaction.execute (Transaction.java:92)

    at MITI.util.database.CommonDataSource.executeTransaction (CommonDataSource.java:80)

    ... more than 27

    Caused by:

    java.sql.SQLException: ORA-22813: value of the operand exceeds the limits of the system

    at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)

    at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)

    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:206)

    at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)

    at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)

    at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1035)

    at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:194)

    at oracle.jdbc.driver.T4CPreparedStatement.executeForDescribe(T4CPreparedStatement.java:791)

    at oracle.jdbc.driver.T4CPreparedStatement.executeMaybeDescribe(T4CPreparedStatement.java:866)

    at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1188)

    at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3386)

    at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3487)

    at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1374)

    at MITI.util.database.Query.executeStatement (Query.java:45)

    at MITI.util.database.Statement.execute (Statement.java:66)

    to MITI.util.database.CommonDataSource$ 1.run(CommonDataSource.java:50)

    to MITI.util.database.CommonDataSource$ 1.run(CommonDataSource.java:47)

    at MITI.util.database.Transaction.execute (Transaction.java:92)

    at MITI.util.database.CommonDataSource.executeTransaction (CommonDataSource.java:80)

    at MITI.util.database.CommonDataSource.executeStatement (CommonDataSource.java:54)

    at MITI.server.services.lineage.impl.LineageImpl.traceLineage (LineageImpl.java:554)

    at MITI.server.services.lineage.common.LineageTracer.traceLineage (LineageTracer.java:1078)

    at MITI.server.services.lineage.common.LineageTracer.traceDataLineage (LineageTracer.java:313)

    at MITI.server.services.lineage.common.LineageTracer.traceTechnicalData (LineageTracer.java:176)

    at MITI.web.common.service.facades.LineageFacadeImpl.getLineageGraph (LineageFacadeImpl.java:245)

    at MITI.flash.tabs.VizModelLineage.getLineageTree (VizModelLineage.java:429)

    at MITI.flash.tabs.VizModelLineage.buildLineageGraph (VizModelLineage.java:356)

    at MITI.flash.tabs.VizModelLineage.performAction (VizModelLineage.java:148)

    at MITI.server.servlets.FlashServlet.doPost (FlashServlet.java:156)

    at javax.servlet.http.HttpServlet.service(HttpServlet.java:646)

    at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)

    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:303)

    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208)

    at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:220)

    at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:122)

    at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:170)

    Oracle has published OEMM 12.2.1 and this error is gone! So if you are facing this problem in an older version, just go to the newest one.

  • ORA-22813: value of the operand is greater than the limits of the system

    Hello
    for small query

    SQL > select COMPLETION_TIME from RC_BACKUP_FILES WHERE ROWNUM < 2;

    I get

    ORA-22813: value of the operand is greater than the limits of the system

    It seems starnge to me, you know?

    I have a great value operand?

    Thanks for help.

    The Version could help here

    might be a bug

  • Windows automatically restarts constantly, cannot access the system restore point, cannot access the computer in safe mode

    Hi all

    For the not 24 hours I tried to access my computer in normal mode. When I turn on the pc, it says "configuration data 1 of 3 steps...". 0% complete"he never spent 0% and within seconds, it automatically restarts and starts again. It's so frustrating! I have a windows vista pc (purchased in ' 06). I can only access my desktop in SafeMode.

    I tried to perform a system restore, but not like he says "recovery disk is not the restore point selected. What should I do? I tried to manually create a restore point, but cannot access the system and Maintenance, while in safe mode. I can't do anything but literally access the internet. How can I get Windows back to factory settings it is with these limited resources? I have a Dell reinstallation DVD.

    I searched my programs and found that recently Windows automatically updated and downloaded "Microsoft Powerpoint Viewer" and "for 2007 Office system Compatibility Pack '. Now, I think it has something to do with it, because they were the most recent updates, before the pc crashed. But I also fear that it may be a virus, which has completely hijacked this PC. How am I supposed to get rid of a bug, if I can't even get the necessary antivirus?

    Sorry for the ranting, but it's so stressful when my pc is completely down. Please, please please help me. Thank you in advance for reading this same!

    Arianne

    Hello

    you talk about restore and system recovery disc in the same breath

    they are 2 different things

    and you can NOT create a restore of yesterday and today!

    yesterday is gone

    If it does not already; You can't do

    1st thing to try is a restoration of the system in safe mode

    http://www.windowsvistauserguide.com/system_restore.htm

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    If that does not read this information

    the link below is how to download and get a vista disk startup repair, which you can start from the

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

    It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

    Change boot order it do dvd drive 1st in the boot order

    http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

    The malware removal:

    Download update and scan with the free version of malwarebytes anti-malware

    http://www.Malwarebytes.org/MBAM.php

    You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

    http://www.bleepingcomputer.com/download/anti-virus/rkill

    If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode with networking with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    Reinstall vista from Dell DVD

    http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  • Windows 8.1 refuses to encrypt the system drive

    Reference Dell place 8 Pro Tablet running Windows 8.1 (not Pro). After much frustration with this unit, I decided to dry completely and do a fresh install of Windows. And indeed, all of my previous problems just disappeared. - But there is now a new: BitLocker refuses to (self-) encrypt the system drive, as it is supposed to do. Windows claims that the device encryption is temporarily suspended but will resume after the next startup. However, no matter how many times I reboot the device, encryption/protection remains in the suspended state. The venue Pro 8 has a secure TPM, or more precisely a fTPM (TPM firmware). I am somewhat familiar with the TPMs management and then I went through procedures to prepare the TPM (which was what the suggested corresponding event logs), but it did not help. As the version of the OS is ordinary Windows (and not Windows Pro), the BitLocker feature is very limited, but sufficient to reveal 'Key protectors' are missing. If I have Windows 8.1 handling of automatic encryption, white protective key test should have been filled as soon as Windows has managed to record a recovery on my outlook account key. That, however, seems will never happen. Maybe because Windows has seen the device before that soft install. But even remove the device from my account, and then add that this return has not changed things.

    To answer my own question: KB2949621-v2

  • Cannot use windows backup error: 0 x 80070002 the system cannot find the file specified

    Original title: Backup failed, error code but no NVIDIA chipset

    Whenever I try to use the Windows backup utility, I get a failure with the error code 0 x 80070002 and "the system cannot find the specified files" - I found KB976972, which refers to these two messages, and I have all the conditions specified here EXCEPT that I don't have an NVIDIA USB Enhanced Host controller Interface (EHCI) chipset.   I advanced and tried the hotfix download referred to in article, but he wouldn't because he did not to my system.   I don't seem to find any other KB articles that are relevant.   I have a lot of space on the external hard drive that I am backup.    Would appreciate any help.

    Win7 Backup - error. (0 x 80070002) - cannot find the file specified.
    http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/bff71aac-c78e-42bd-A959-116019c93478

    ====================================================================

    Norton Ghost version 15 - has a 30 day trial available
    http://www.Symantec.com/Norton/Ghost
    Media: CDR/RW, DVD + R/RW, Blu - Ray, USB and FireWire® devices (IEEE 1394), Iomega Zip® and Jaz® drives
    (Note: trial does not create a Bootable restore CD you will need to restore the image)
    http://www.Symantec.com/Norton/downloads/trialsoftware/register.jsp?PVID=ghost15
    User Guide: ftp://ftp.symantec.com/public/english_us_canada/products/ghost/15/manuals/ngh_15_user_guide.pdf

    Acronis True Image 2012 - has a fully functional trial version of 30 days available.
    (Note: install Acronis and then create a bootable media restoration/rescue CD before you start creating your first image backup)
    http://www.Acronis.com/homecomputing/products/
    30-day trial: http://www.acronis.com/homecomputing/products/#tryorbuy
    True Image User Guides and documentation:
    http://www.Acronis.com/support/documentation/index.html

    Ghost 15 product review
    http://www.PCWorld.com/reviews/product/384118/review/Norton_Ghost_15.html
    Ghost 15 screenshots:
    http://www.Softpedia.com/get/system/back-up-and-recovery/Symantec-Norton-Ghost.shtml

    Acronis True Image Home 2012 product review:
    http://www.whatsabyte.com/P1/ATI_2012_Review.html
    http://www.allacronis.com/Acronis-True-Image-home-review.php

    Acronis True Image Seagate Edition (drive Assistant)
    http://www.Seagate.com/www/en-us/support/downloads/DiscWizard

    Acronis True Image edition of Western Digital (WD)
    http://support.wdc.com/product/downloaddetail.asp?Swid=119&wdc_lang=en

    Also copy disc to disc with Norton Ghost
    http://Service1.Symantec.com/support/PowerQuest.nsf/docid/2004111701520562?OpenDocument&src=hot&prod=Norton+Ghost&ver=10.0&CSM=no&SEG=HHO

    Free alternatives:
    EASEUS Todo Backup Home V3
    (Note: Todo Install, then create a diskette "emergency" before you start creating your first image backup)
    http://www.TODO-backup.com/products/home/free-backup-software.htm

    Untested alternatives
    Reflect disk imaging:
    http://www.Macrium.com/reflectfree.asp

    Paragon Backup & Recovery Free Edition:
    http://www.Paragon-Software.com/home/DB-Express/download.htm

    J W Stuart: http://www.pagestart.com

  • Wanted M6 Sleekbook: Can I get my free 10 Windows upgrade after a recovery of the system for Windows 7?

    Hi guys,.

    I have a HP Envy M6 Sleekbook. It came with Windows 7, and its warranty expired 2 years ago. I took the offer to get a free upgrade of Windows 10 a few months ago. Now, I want to exchange the hard drive out. I have a ready to run on a USB system recovery but its for the original configuration of Windows 7...

    My question:

    Is there a way I can share disks and get 10 back Windows without paying? HPO only allows you to create a system USB once recovery disk, so I can't make a new record of recovery with windows 10. When I get the factory Windows 7 running on the new hard drive, I'll be able to upgrade to Windows 10 new since I already had it and I wanted to just swap drives?  Thank you!!

    This link should help you get started: upgrade Windows 10  

    You can install Windows 7 with your recovery discs and then upgrade to Windows 10 or you can create a Windows [USB/DVD/ISO] 10 installation media and use it to make a 'clean' on the new hard drive installation.

    Notes on activation:

     

    • If you have never installed and activated Windows 10 on this computer before, you will see the activation screen. Enter your key of Windows 10 here. If you do not, but you have a valid 7, 8 or 8.1 key, enter it here instead.
    • If you have already installed and activated Windows 10 on this computer before, click on "I don't have a product key. Windows will activate automatically after installation.

    If you found my answer helpful please say thank you by clicking on the icon of the thumb.
    If my answer has solved your problem, please mark it as accepted Solution. Thank you!

  • Pavilion c 500-437: free windows update 10 - how to make the system disk?

    I got this new system, which came with win 8.1

    I burned 4 DVD backup disks immediately.

    I did the free update for windows 10.  everything went well

    Now, I want to make the record system for Windows 10.   I see on the recovery partition, he has a record date 01/06/2015 10:02 2.01 GB free of 15.8 GB

    Great so what OS is on theat partition? 8.1? I guess that is how

    Second.-

    How can I do to burn the recovery system/dvd (s) for Windows 10.

    is there a FAQ for this particular situation, or am I in nomans land between hp and MS?

    Help, please.

    You are the very welcome.

    From any PC which is come with W8 or newer, there is no more stickers product key.

    Which was imposed in another attempt to reduce the illegal use of the product on the other PC OEM keys, which is a violation of the rules on the OEM licenses Microsoft PC manufacturers.

    The key that you received from the Belarc Advisor is one who is encrypted in the BIOS, and it is only good for your PC.

    The other problem is that the key cannot be used to activate a non - OEM version of W8.1.

    For example: you can download and make W8.1 installation of Microsoft support about the same way you just did to W10 installation media.

    The difference is the installation of W8.1 media that you downloaded will not work with OEM product key that you received from the Belarc Advisor.

    You need an OEM Setup disk to work with OEM product key.

    Personally, I think it's terrible, but that's what has Microsoft done.

    In other words, if your OEM recovery disks don't work, you are flat out of luck, unless you buy an OEM of Windows 8.1 version.

  • File 'Install' Windows XP is 30 + concert and the system is almost out of space, how this can be fixed?

    I added memory to a Windows XP Pro machine and concluded that the system was almost out of space!  After investigating this problem found the installation in the folder windows file was more than 30 gig by itself, the files in this folder back to the initial installation of Windows.  How to clean this file?

    I added memory to a Windows XP Pro machine and concluded that the system was almost out of space!  After investigating this problem found the installation in the folder windows file was more than 30 gig by itself, the files in this folder back to the initial installation of Windows.  How to clean this file?

    You say that a "report" is 30 GB?  Or a folder containing files?

    Maybe overkill - but unless you have less than 1 GB of memory (live RAM) of the system, the upgrade of memory was probably exaggerated too with WIndows XP.  ;-)

    Search for malware:

    Download, install, execute, update and perform analyses complete system with the two following applications:

    Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

    Search online with eSet Online Scanner.

    The less you have to run all the time, most things you want to run will perform:

    Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

    You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

    Do a house cleaning and the dust of this hard drive:

    You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

    Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

    If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
    http://www3.TELUS.NET/dandemar/spack.htm
    (Especially of interest here - #4)
    (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

    You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

    How to use disk cleanup
    http://support.Microsoft.com/kb/310312

    You can disable hibernation if it is enabled and you do not...

    When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

    -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
    -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
    -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

    You can control the amount of space your system restore can use...

    1. Click Start, right click my computer and then click Properties.
    2. click on the System Restore tab.
    3. highlight one of your readers (or C: If you only) and click on the button "settings".
    4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
    5. click on OK. Then click OK again.

    You can control the amount of space used may or may not temporary Internet files...

    Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

    -Open a copy of Microsoft Internet Explorer.
    -Select TOOLS - Internet Options.
    -On the general tab in the section 'Temporary Internet files', follow these steps:
    -Click on 'Delete the Cookies' (click OK)
    -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
    -Click OK.
    -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
    -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

    You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

    CCleaner (free!)
    http://www.CCleaner.com/
    (just disk cleanup - do not play with the part of the registry for the moment)

    Other ways to free up space...

    SequoiaView
    http://www.win.Tue.nl/SequoiaView/

    JDiskReport
    http://www.jgoodies.com/freeware/JDiskReport/index.html

    Those who can help you discover visually where all space is used. Then, you can determine what to do.

    After that - you want to check any physical errors and fix everything for efficient access"

    CHKDSK
    How to scan your disks for errors* will take time and a reboot.

    Defragment
    How to defragment your hard drives* will take time

    Cleaning the components of update on your Windows XP computer

    While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

    Download and run the MSRT tool manually:
    http://www.Microsoft.com/security/malwareremove/default.mspx
    (Ignore the details and download the tool to download and save to your desktop, run it.)

    Reset.

    Download/install the latest program Windows installation (for your operating system):
    (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
    (Download and save it to your desktop, run it.)

    Reset.

    and...

    Download the latest version of Windows Update (x 86) agent here:
    http://go.Microsoft.com/fwlink/?LinkId=91237
    ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

    Close all Internet Explorer Windows and other applications.

    AutoScan--> RUN and type:
    %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
    --> Click OK.

    (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

    Reset.

    Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
    How to reset the Windows Update components?

    Reset.

    Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

    Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

    If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

  • Windows xp does not start after the system restore

    Hi, a few days ago, I restored the system to my computer because it showed no hard disks that have been added to the computer. I had no problem before, so I restored the system to the same day. AGTER system restore, my computer would not start. Well, it's not to the point where I'm supposed to pick a user, but instead of a list of users, it shows 'windows xp' on a blue background. I turned the computer off tension and Trier to start in "safe mode", but it did not help. What should I do? Thank you.

    Hello

    Follow these steps and check if they help.

    Step 1:

    Remove all external devices such as printers, USB and then try to start.

    Step 2:

    I suggest that you perform the installation of repair XP on your computer and check if that helps.

    http://www.Microsoft.com/windowsxp/using/helpandsupport/learnmore/tips/doug92.mspx

    Note: Make sure you have uninstalled the latest version of Internet Explorer if installed before to perform the repair facility.

    Reference:

    http://support.Microsoft.com/kb/917964

  • window cannot find an image of the system on this computer

    I HPPavilion dv6 3134se notebook.when I purchased.its system of exploitation was windows 7 Home Basic. My friend suggest me to improve windows 7 ultimate.he also give the dvd of windows 7.i have installed it.after3days a message appear in microsoft.that your copy is not original. ITry to get my previous windows home basic.when 7 I press F 11 & strength to apear tahat window of recovery of a message can not find an image of the system on this computer. I'm trying my level it find a message appear.thatspecify the location of the system image. How to search for image system on the network pleasehelp URL me & my hp recovery partion also now not loki ngcomputer.i hope help me.

    Hello

    HP do not provide a download for this utility.

    You can order a set of replacement recovery disks using the link below and use them to reinstall the original OS.

    http://support.HP.com/us-en/document/c00810334

    If you have a problem with this link, order them directly from HP.

    If you live in the United States, contact HP here.

    If you are in another part of the world, begin here.

    Kind regards

    DP - K

  • Windows 7 Pro 64 disabled after the system crash

    Hello. My active 64-bit Windows 7 system crashed this morning with the Blue Screen of Death. Restart is not possible - message "Bootmgr is missing" came. I used the repair disk, I did when I got to the computer to fix the boot sector and was able to start normally. But now Windows 7 is described as not authentic; previously, there has been properly activated. I tried to activate the system again, but received error messages, including 0xC004C003 which apparently means that the serial number is already in use. It's - it's mine!

    Some googling led me to try a system restore.  I tried a restore point of more recent, just system restore before updating to the latest version of Windows. It gave me the error message that the system restore did not finish and system files have been updated - 0xc0000022.

    In addition to searching led me to try from the command prompt (in as an administrator) "sfc/scannow". Who successfully completed reports that no violations not found and no file system not necessary change.

    Can anyone suggest how now can I reactivate my copy of Windows 7 Pro?  Apparently I left three days in which to do!

    Give a try:

    https://support.Microsoft.com/en-us/KB/2230957

    If this does not work, try the following:

    How to activate Windows 7 manually (activate by phone)
     
    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.
     
    http://support.Microsoft.com/kb/950929/en-us

Maybe you are looking for