Windows 7 backup and restore shows no internal hard disk and the backup location option

Similar Questions

• I try to burn a DVD with Windows DVD maker and the tiles are about 3 hours or so in total and I like it's too big - it is possible to use SP, SLP. ED or when burning on a DVD

  • I am trying to burn a DVD with Windows DVD maker and the tiles are about 3 hours or so in total and I thought it's too big – is it possible to use SP, SLP or ED when burning to a DVD problem

  • I am trying to burn a DVD with Windows DVD maker and the tiles are about 3 hours or so in total and I thought it's too big – is it possible to use SP, SLP or ED when burning to a DVD problem

  ==========================================
  The following article shows 150 minutes on a single DVD layer, but
  I'd be surprised if it always worked this way. In any case...
  Perhaps you could use a DVD double layer if your burner will handle it.

  Windows Vista - DVD - video burning - frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/DVD-Video-burning-frequently-asked-questions

  Splitting the project between 2 or 3 DVD might be the best option.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Whenever I connect my Motorola Atrix to the PC, Windows XP closes and the PC freezes

  Original title: Smartphone closes windows

  Whenever I connect my Motorola Atrix to the PC, Windows XP closes and the PC freezes. Does anyone else have this experience.  The connection works fine on my laptop.

  Hi patsatrix,

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem?

  3. This occurs when you connect other USB devices also?

  You can try to configure the computer so that it starts cleanboot and check if it helps.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353/en-us

  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  Hope this information is useful.

• All of my Windows Mail subfolders and the emails contained in disappeared mysteriously.

  original title: Windows Mail lost all subfolders

  All of my Windows Mail subfolders and the emails contained in disappeared mysteriously.  I closed Windows Mail with all folders and opening Windows Mail again the next day, only the default folders (Inbox, sent, etc.) were present.

  I created a new folder named "Test" that I can see has been saved in "C:\Users\San\AppData\Local\Microsoft\Windows Mail\Local Folders" as well as other folders by default, but I can find no trace of my 20 folders + that I had previously.

  Help!

  Nobody knows what could have happened and if they might be elsewhere on the HARD drive?  I have run several searches looking for folder names, but so far have developed in white.

  Any help would be greatly appreciated.  Thank you.

  Open your Windows Mail, under local folders, Inbox. Yes?
  Is there a pointer to this Inbox?
  If so, click it.
  See my link to the screenshot:
  http://public.Bay.livefilestore.com/y1phMGm5qIeGuRY_L_Wj7go7Dt5SkzKh72l76uUxsmTRaL-YEWbMNpeEnABo26hO6u1f9YHWpfWp8Ud6qg3yHR2pg/pointer.PNG

  Are your 'subfolders' back on now?

  t-4-2

• could not open windows live messenger and the error code 80040200

  Original title: error code 80040200

  I could not open windows live messenger and the error message I got was... error code 80040200... How can I fix this... Thanks for your help

  Hi NateGoodman,

  When you use Windows Live Messenger and the question you have posted is related to Windows Live, so it would be better suited in the Windows Live community. Please visit the link below to find a community that will provide the best support.

  Windows Live Messenger

  http://windowslivehelp.com/product.aspx?ProductID=2

  I hope this helps.

• Since download IE9 has changed the font on my message preview, on Windows Mail panel, and the symbol of the attachment is not there. How can I change this back?

  Since download IE9 has changed the font on my message preview, on Windows Mail panel, and the symbol of the attachment is not there.  How can I change this back?

  Just go in the Panel. Programs and features and then click on the left of "view installed updates" and find Windows Internet Explorer 9, and then you can uninstall it.  You should know that it is installed automatically via Windows Update, so you'll need to keep it to be reinstalled.  I think you can go Windows Update manually, and then it will ask you, then you can't deny it there and it should stick.

  Steve

• I forgot my Windows Vista password and the hint.

  I forgot my windows vista password and the answer to the clue. I tried many options, but it does not work... I don't have any what administrator, I'm onlu user.

  I don't have a bootable CD or anything at HP. Can someone help me as soon as possible.

  Hello
  Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the sticky below.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd Aaron
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Are there differences between Windows 7 OEM and the commercial full version?

  Are there differences between Windows 7 OEM and the commercial full version?

  Commercial versions include two disks installing 32 and 64 bits and can be moved to new systems.

  OEM versions are either 32 or 64-bit - only installation disc is included - and cannot be moved to a new system.

• internal hard drives within the switching apparatus

  Switching of the internal hard drives in the machine. I have two internal hard drives, C and E of clarification and I replaced my C Seagate 360 with a TB Western Digital because of this hard disk failure false I bought, which I'm sure were a corporate scam to buy more stuff that is really unnecessary. My question is "how to pass these. My HP Pavilion Elite m9150f going in stupid mode on 3 to 5 times a year and I have to do a recovery and I found that doing the hard, it is happening in stupid mode in a very short time. I found is from the CD that it takes a little more, but the best way is to erase completely and reformat the hard drive and then do a clean install, so he prevents her from stupid mode for awhile, this one lasted 4 months but like you have probably understood it's time to do it again. However, as you know it takes 3 times as long to reformat TB as it does a 360 GB drive, so it's the root of my question. I have all my stuff on the E-Drive SG360 for backup, note here backup on this PC has never worked so I don't bother with the so-called machines back to top I just copy stuff I want to record on the E drive and make the ol' copy ' and paste to restore everything. Now because of the time it takes to reformat drive C TB I want to make the switch. Is it as simple as just their switching and pulling the PC with the recovery discs factory to perform RECOVERY and do my usual copy and paste of the Western Digital to now, E-Drive?

  Please someone with the know let me know

  Thank you very much, RickS

  Aparently, you can not RESPOND to your own message.

  No one answered so I went ahead and did it. Lost all learned but a lot on the partitioning of hard disks and all together, in addition to becoming the hard drive back to R & R until less than 6 minutes time to unplug the PC at the rear, turn 05:53, my best so far. but she is back to being usable was a day and a half.

  The answer to the question is when you put that there is nothing usable at all because the PC looking for the OS and boot any disk has. I had to start player, I chose so that I could erase and reformat the C drive and run the installation of the OS. Once he was done with that I had to choose again which drive start so I could erase and reformat the drive E then he would leave goes to the starting window when I turned it on.

  Simple answer is not a. Read above.

  RickS

  PS: I hope this helps someone.

  Hello

  Check with HP to factory reset of related problems.

  All the best Ricks!

• Inspiron 5748, Crucial M500 - "internal hard disk not found".

  My Inspiron 5748 comes with w8.1 pre-loaded onto a standard 500 GB hard drive, but I wanted to move to an SSD. I have two M500s Crucial (the two 2.5 "); one with W7 loaded from another laptop, the other barely taken out of the box.

  With one of them installed, the message at startup after the dell symbol arrives is "internal hard disk not found", and while there is no bootable media found.

  In both cases, UEFI and back diagnonstics reporting tools that there is indeed a crucial m500 present and functional. Both work well in my other laptops (purchased separately).

  Is there a problem of formatting? There is no update available for this SSD firmware.

  Thank you!

  Hi Wazzbot,

  Use the recovery discs Windows 8.1 you prepared using the Dell printer utility to backup and restore Windows loading on the SSD drive. Because the disks are the same size, it should work without problem.

• Restore from an external hard drive on the same hard drive (uncompressed)

  I have an old backup of my files on external 500 GB MYBook I want to restore the hard drive even on the external 500 GB MyBook.  There are a lot of pictures and family videos.  How can I do this without restore on my internal hard drive which has very little space.

  Hello

  1. what type of backup is? What application did you use to create this backup?
  2. What is the extension of this backup file? Is this backup a single file?
  2 have you tried to copy the files and images directly on the hard drive?
   
  If these files are simply saved in the hard disk, you can simply copy and paste the files on the disk. If it's a backup file provide the information identified above to help you further.

  I hope hear from you soon!

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to check the type of hard disk of the windows operating system?

  on linux, we can find the hdd for example of name setail

  Type a - ide

  SDA - ACHI or sata or sas

  a way to find the type of hard disk in the windows operating system? as linux

  any command or something

  In Windows 7, you can get a lot of details by selecting Start, all programs, accessories, System Tools, system information, components, storage disks. It was very similar to Windows XP, but for all information users tend to use Everest or Belarc Advisor for additional information not available. Everest has been best Bellarc advice but they ceased to offer tan updated free version. However, the 2.20 version is always available from third-party sites.
  http://www.Softpedia.com/get/system/system-info/Everest-Home-Edition.shtml

• How can I "RECORD each piece of data (and I mean everything!)" contained in the hard disk of the laptop? »

  How can I "RECORD each piece of data (and I mean everything!)" contained in the hard disk of the laptop? »

  I know PC never fade completely everything, so if there is a way to get personally, I'd really like the head upward on the how to do?  I would be better for me to download all this information on a PHDD, rather than handing the portable real in question so that its content of forensics experts, because current 'Communications Network serious security' we have been subjected to.

  Here you go:

  1. Use an imaging program to create a clone of your hard drive.
  2. Delete the original from your PC hard drive and keep it somewhere safe.
  3. Put the clone in the PC.

  It is the only way to really keep all while still able to use the PC.

• I'm trying to publish my site using the Publish drop and the FTP host option.

  I'm trying to publish my site using the Publish drop and the FTP host option. I enter the details requested and all it gives me, it is an error message of "could not sign you [suite failed to read].» Check your user name and password'. I'm the host my site on One.com. There is no place for me to choose the 20 port (although it should use anyway) and I have spent hours on the design of Web sites and do not want to go to waste. I use a trial version but Adobe say he has all the features of the paid version, which, at this rate, I will not get! I've updated the app 12 days ago. Csomeone help?

  As the error says it's a problem with the user name and password. If your host requires that you use port 20 just add: 20 at the end of your address of the remote host.

  For example: yourRemoteHost.com:20

• The tab 'fonts' & 'file' in the creative cloud window shows only a wheel of continuous rotation. Even after leaving the window open all night, he showed nothing. I went in the OOBE folder and tried to remove the button Delete the opm.db file, but it i

  I was never able to access these features in the window of creative cloud. I tried to access the OOBE folder to remove the file from opm.db to . There is no file opm.db. I followed the advice from another thread and delete the contents of the OOBE folder. This did not solve my problem. I left the window of creative cloud open for a whole day hoping that would solve the problem. He did not. Thanks for any help you can provide this issue.

  Thomasc11484006 have you tried to run the uninstall program Adobe Creative Cloud desktop application and then put it back?  Instructions and the uninstall program can be found at code error 2 or 50: Creative Cloud desktop application update doesn't have.  You can then reinstall the application using the steps listed in download and install Adobe Creative cloud appscreative cloud.  We invite you to update this discussion if you have any questions about the steps that are listed in each document.