Windows 7 boot image

Similar Questions

• The windows XP boot image

  Hi, I just got a computer from a vendor who shows a picture to start windows using the "Microsoft office picture manager. The problem is that the operating system stops until I close the 'Microsoft office picture manager' loading. It is annoying to be able to close this image every time I start the computer.

  Question:

  How can I get rid of this image to load at startup of windows?

  Kind regards

  kikeman

  That will probably be controlled by one of the services or startup programs.  You can selectively disable the, or all of them at a time to see if that gets rid of them.  Also try to boot into safe mode and see if it still shows this image.  You can also search for viruses and malware.
   
  Steve
   
  wrote in message News: * e-mail address is removed from the privacy *...

  I recognized some of the application that started with the computer, but it seems they are responsible when the windows that display the office already.

  The image I want to talk to is loaded before showing the desktop and windows to stop loading (desktop computer will not appear) until I close the image (shown in 'Microsoft office picture manager')

• How to make a disk image of work for my windows 98se boot (original is long dead)

  How to make a disk image of work for my windows 98se boot (original is long dead).  I have a copy of Windows 98SE bought new off the years of the plateau.  I now have a 64-bit system, so I can't run it natively, but I discovered that I can't even run at all, because I don't have a working bootable floppy!  I thought that the CD is bootable, when I used it a long time ago, but now it does not start if I have used the disk? Anyway, can I get a driver Microsoft w/CD install/bootable disk, or do I have another decent resource?

  Thank you. You can contact me to the * address email is removed from the privacy *.

  http://www.bootdisk.com/bootdisk.htm

• What makes USB boot measure 4 windows 8 iso image

  I downloaded windows 8 iso image and Rufus make USB bootable. Still, my hp 2000 does not recognize USB. Here are the steps I performed.
  1 windows iso image downloaded 8.
  2 downloaded Rufus
  3. plugged in USB ran rufus, rufus in USB format
  4. iso image loaded windows 8 on USB
  5 laptop power target press ESC, f9 for boot order, but sees no USB option for starting.
  I already changed my boot order in the bios and the target computer has booted from USB before with another program.
  Please tell me what other steps should I take thanks

  All went well?

  If so,.

  PLEASE CLICK ON ACCEPT AS SOLUTION TO HELP OTHERS WITH THE SAME PROBLEM

  CLICK ON BRAVO TO SAY THANK YOU

• Windows boot image not deleted.

  Hello people,

  I recently had a problem (associated virus) with 10 installed windows on my MBP 2015 to lead back me to zero and I did because I had the same problem with a windows pc and it was perfect. Once the reset is complete, I noticed that the boot camp software was deleted! and here the problems started. I searched the web to find out how to get it back, but I was disappointed. I went back to OS X to delete the windows using boot camp, but he did not have any installed windows!. So I decided to format the partition and resized only Macintosh HD space. Then I rebooted the system pop up with error windows! I did it again with holding "alt" key and it turns out that it has not been deleted. How to get rid of him?

  Here is the output of the Terminal.

  List of $ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 251,0 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage Macintosh HD 250.1 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650,1 MB HD

  / dev/disk1 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD GB + 249,8 disk1

  Logical volume on disk0s2

  1A536D95-E994-47F8-A9A2-605C2AA7AE3C

  Unlocked encrypted

  =========================================================================

  $ sudo TPG - r show/dev/disk0

  start index size summary

  0 1 PMBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 488555312 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC

  488964952 1269760 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  490234712 7

  490234719 32 table dry GPT

  490234751 1 dry GPT header

  You do not have the Windows partition, but your EFI (disk0s1) partition has vestiges of Microsoft Bootmanager.  You can use Re: cannot resize the Macintosh HD partition as a reference, mount your EFI partition and check if you have a directory of Microsoft in your EFI partition?

• Selected boot image is not authenticated. Press on < enter > to continue

  I just removed the stock HARD disc that came with my M4-1015 x and now I am trying to install windows 7 on the SSD that I replaced it with. However, when you start up I get the message "the selected boot image is not authenticated to. "Press on < enter > to continue" when the laptop tries to read the operating system from the disk. I've never seen this before... any help? (This is a legitimate copy of Windows 7 DVD)

  Thank you.

  I fixed it. Of the secureboot to activate and deactivate bootmode inherited so he can work.

• "HP Pavilion X 360 13": HP Pavilion X 360 13 ' selected boot Image is not authenticated. Press on &lt; enter &gt; to continue

  Hi all! I was wondering if someone could help me. My laptop started to tell the boot image selected is not authenticated is and asks me to press on enter. However, whenever I do this, the laptop is just turns off. I have read through the forums and tried all unique methos. No matter what I do, I can't access and type of BIOS or diagnostic, everything I chose makes it go to this screen. If you could give me any help, I'll be very grateful. It comes preinstalled with Windows 8 and has since then been upgrade Windows 10.  Also, when I turn on the computer, I heard a strange buzzing of the mouse pad area, what is?

  Thank you!

  Spoiler (Highlight to read)

  Spoiler (Highlight to read)

  Oops, I didn't add this.

  Oops, I didn't add this.

  Hey there! @mycatdaphne, thanks for the reply.

  Thank you to perform troubleshooting.

  As you mentioned that you still can not access BIOS.

  It's a hardware issue please contact HP support for service options.

  Link to contact HP: http://hp.care/2bkTGBQ

  Have a great day!

• selected boot image is not authenticated

  I just bought a new HP ENVY-4 with pre-installed Windows 8.

  After a few weeks where it has worked well, the computer began to get into trouble. Then he simply did not start more. As I shitch, stay for a while with black screen and then a blue mask pops up saying 'the boot image selected is not authenticated to. Only chance is so press ENTER, then the computer off completely.

  I am hollow your forum and try to almost everything.

  Tools of recovery to run, but not to solve. After treatment, the problem is still there.

  I noticed that if I try to run the "repair of the problems at windows startup" tool, computer said it was not able to repair...

  I open BIOS and changed the relevant setting ensure also the start-up and mode inherited... the computer simply does not start!

  I finally re-formatted the french PC key to restart USB, (made with the HP support tool, when it was new)... same problem appear like I'm back!

  Can you help me please? 3 months computer brand is new and I really disappointed to trow away my money.

  Thank you

  effebbi,

  If your battery off not easily with a lock at the back of the laptop, you can hold the power button for 30 sec with the power cord removed to do the same.

  I would like to know how everything goes

  Nice day.

• HP 250 g4: boot image selected is not authenticated

  Hello, my computer has problems from the beginning. One day, I restart my pc and this appears:
  "Boot device not found.
  Please install an operating system on your hard drive
  Hard drive (3F0)
  The F2 System Diagnostics.
  So I did all the tests diagnostic tests and all translate "SUCCESS."
  I called support and they are sending me the two DVD «Recovery media for windows 10 products»
  I followed the instructions and put the first DVD, and then I started the pc. At first, it seems that the cd will then start appears this sentence "the boot image selected is not authenticated to. Press to continue.
  What could I do?

  Hello

  Try the following.

  Judgment of the laptop.

  Click next to the ESC key as soon as you press the power button to enter the Boot Menu, and then select the Bios Menu ( f10 ).

  Under the System Configuration tab, expand the Boot Options Menu.

  Select 'Clear all secure startup keys' and click Ok

  Select "load factory defaults keys HP", and then select Ok

  Save the changes that you exit the bios and try to re-run the recovery DVDs.

  If you still receive the error, return to the Bios Menu, System Configuration tab and expand the Boot Options Menu.

  Activate 'Legact Support' and save the changes that you exit bios - you will then need to enter a PIN of 4 numbers displayed on the screen to confirm the changes to the settings - enter the code and press ENTER.

  Try to run the recovery dvd.

  Kind regards

  DP - K

• Pavilion 17-g108na: selected boot Image is not authenticated

  Dear Sirs

  I provide a laptop HP with windows 7 in the course of running for my clients.

  I bought a HP Pavilion 17-g108na and bought Windows 764 bit on a DVD.

  When I want to boot from the DVD, I get the error message:

  "The boot image selected is not authenticated to. Press enter to continue. »

  Is someone can you please tell me what I should do to get windows 7 installed.

  This would be much appreciated!

  Best regards, Chris

  Hi Chris,

  If you want to install Windows 7, need to disable secureboot and activate the start mode inherited so he could run.

  

• Deployment PXE OptiPlex 5040 problem | WINPE5.0 Boot Image SCCM 2012

  Not able to get the PXE working on 5040. It will download the SCCM DP boot image. Once it downloads, it does not start.

  Network driver is already part of the Boot Image.

  I know it's been a while since this was posted, but I was having the same problem as OP and had the driver of WinPE 10 pack already loaded in SCCM.

  Our 5040 are small FF and Intel I219 - V NIC.  I tried to PXE boot so I could install an image of company (Windows 7) on the workstation, but every time load WinPE it could restart because that were not install NIC drivers.  I checked the CARD driver has been added to the image start several times, triple checked it was the same driver on the Dell support site, tried a little more recent driver from the Intel site, even started in the OEM of Windows version and check the drivers - all were the same.  I even went as far as putting the drivers on a USB stick and load via the command prompt, but it just would not work.  On a whim, I loaded the drivers Windows 10 NIC in WinPE via USB and command prompt and that worked.  I guess it's because I'm using WinPE 10 but I've never had to do before.  The driver that I loaded was E1D65x64.inf - we use x 64, if you use x 32 I believe that the pilot will be E1D65x32.inf.

  I just did inject the new driver in to our boot image and I'll test after the local RFP PXE is updated.

• SCCM 2012 SP1 boot image error

  Begun to address.
  Creating boot image.
  Copy of the WIM file.
  Mount WIM file.
  Mounted WIM file.
  Setting Windows PE system root.
  Set the root system Windows PE.
  Set the workspace of Windows PE.
  Addition of standard components.
  Add component: winpe-mdac
  Adding additional content to: C:\Users\sysjep\AppData\Local\Temp\16\u5llcxcu.kw3
  WIM of disassembly.
  WIM from the copy in the package source directory.
  Create a boot image package.
  Error when importing the sequence of tasks Microsoft Deployment Toolkit.

  Cannot insert OSD binaries in the WIM file

  Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryException: The SMS provider reported an error. ---> System.Management.ManagementException: generic failure
  to System.Management.ManagementException.ThrowWithExtendedInfo (ManagementStatus errorCode)
  to System.Management.ManagementObject.Put (options PutOptions)
  to Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObject.Put (ReportProgress progressReport)
  -End of the exception stack trace internal-
  to Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObject.Put (ReportProgress progressReport)
  at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObject.Put)
  at Microsoft.BDD.Wizards.SCCM_ImportTaskSequenceTask.DoWork (SmsPageData smspageData, dictionary 2 data)

  Hi Sam,

  The question you posted would be better suited in the TechNet Forums; We recommend that you post your question in the TechNet Forums to get help:

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  Keep us informed on the status of the issue.

• Windows 10 boots and stuck on the black screen with high CPU

  Hello

  I have a MBP 15 "mid 2015 16G with AMD R9 M370X i7.

  I've been running bootcamp with Windows 10 installation for about a month now without any problems.  However, yesterday 10 Windows started and has been blocked in a black screen (before any screen logo or connection win) with the CPU works hard and hot.

  1. I tried to restart some time hold button / stop and start with the option key, key and then selecting the windows bootcamp partition but it drove the same black screen with CPU hot work in the background.

  2. I can always start OSX fine during this period.

  3. I tried to leave in the black screen for a good 10 minutes, but it does not change and the MBP gets really hot.

  4. I tried clearing NVRAM with Boot option + command + P + R

  5 I can't in Windows 10 safe mode using F8 or FN + F8 after you select windows to boot manager (starting with the down option).  Am I missing something here?

  I don't have a copy of Installer windows 10 with me right now unless someone can tell me how to create one under OSX.

  I searched on the internet forum and apple, but have not found a solution that works for me.  Many speak of win10 black screen with cursor showing, but my question is just a black screen with no cursor.

  Someone at - it other ideas besides reinstall Windows 10?

  You have a black screen with or without power adapter, both? If 10 Windows does not start correctly three times, it should bring up the recovery console. Windows automatic updates are enabled? You have created/activated Windows system restore points?

• El Capitan and Windows 10 Boot Camp Assistant

  Hi, this is my first post so apologies if I've left out anything important. Let me know and I'll add the necessary details.

  Fast, I have been using Windows for years and I wanted to get into Apple and finally last month made the leap. I have a brand new MacBook Pro with 16 GB of RAM El Capitan - 10.11.4 running. However, I am having a lot of problems with the creation and installation of 10 Windows using Boot Camp.

  I had this work with Windows 10 times but made some fundamental mistakes. I resized the partition windows using a windows product so that I could add another partition. This seemed to work and I used it for a short time BUT when I tried to boot into El Capitan would not and that it would only boot Windows. After reading on what I see now that resize the windows from windows under Boot Camp partition is a no-no. lesson learned!

  To actually do things once again, I removed the windows partitions using disk utility. (Again I see now that it is an another no-no that I'd
  used Boot Camp Assistant to remove Windows!) Eventually however, I managed to get to El Capitan, working on the single partition, it is now again works fine and as far as I can tell without any problem.

  After having to go that if I went back to load 10 Windows using Boot Camp. All works until the final start in the section windows it:

  • Creates the separate windows partition
  • Load the ISO file
  • The Windows Support Tools downloads
  • Runs the ISO file and everything looks good... see below: (apologies for the poor quality of the screenshots)

  

  Then, during 'Finish Up', I get an error window:

  

  "Windows has no prepare the computer to start the next phase of the installation." To install Windows restart installation. »

  I tried many things such as to download the Windows ISO file again, running SNC and LANDAU after removing the Windows partition using Boot Camp Assistant and ensure that all other connections to the MBP is deleted except WiFi and get always the same message. As the whole process takes a few hours and tried to work through this for some days now, I would really appreciate some advice/help here for this issue very frustrating sorted.

  Thanks in advance

  Ian

  OSX backup via TM boot in the recovery of the Internet, erase your entire internal drive, restore the TM backup, run SMC/NVRAM reset and try to re - install W10.

  Your problem with remainders of W10 floating outside the Bootcamp partition, which cannot be properly cleaned when THE is used to delete a partition.

• HP Pavilion 15 laptop: boot image selected is not authenticated

  When you turn on the laptop says «boot image selected not to is not authenticated...» "What do I do?

  It's your computer laptop one with a removable battery?

  Remove the battery, unplug the power adapter and press and hold the power button for about 15 seconds. That will reset the hardware of the laptop.

  Put the battery back in and press the power button.

  Post your results here if you please.