Windows 7 Build 7600 not genuine after system reset
I recently had to do a complete reset of the system (reconstituted in State 'out of the box') on my HP laptop. The HP Installer went well and the home screen loaded correctly. However, in the lower right corner of the screen there is a message that says "Windows 7 Build 7600 don't authentic not» I ignored and installed a bunch of Windows updates (56 I think) and my computer restarted. When I did I had a reading of message something like "your copy of Windows 7 may be forged" and I was given the opportunity to either purchase a full version, enter a serial code, contact HP. I bought this laptop from Best Buy and they have already set everything so I did not initially install the operating system. They gave me four "restore disc" with her if. Is it likely that the fix is out there and I just need to run all them, do I have to contact HP, or y at - it somewhere I can find my serial code? Any help would be appreciated.
your windows is not genuine.
Tags: Windows
Similar Questions
-
Windows 7 Build 7601 not genuine after replacing the motherboard?
I recently replaced a motherboard failed in our computer and now I get a "Windows 7 Build 7601 this copy of windows is not genuine" message. Help, please. Thank you. Ed
You have used the product key OEM SLP from the factory (which won't work) and not the key of the COA is located on the sticker on the PC.
You must change the key of 25 characters than on the sticker (side cover of a desktop computer, lower compartment or inside a laptop).
Try the following:
Open a prompt (run as administrator) and enter:
slmgr - ipk XXXXX-XXXXX-XXXXX-XXXXX-XXXXX, then press 'Enter' (where XXXX is your key)
then enter: slmgr - ato and press ENTER.
Wait a few seconds, then exit command prompt. Now to see if your real, reboot if necessary and, even if it's not true they activate by phone.
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) to select your "country" you are in the drop-down list.
(4) choose the option "activate phone".
(5) stay on the phone * do not select/press any option * and wait for a person to help you.
(6) explain your problem clearly to the support person.
(7) the person must give you a confirmation ID, copy it down on paper,
(8) check that the ID is correct in reading the support person.
(9) to enter the ID number, then click 'Next' to complete the activation process.Activation and registration of a Microsoft product
http://support.Microsoft.com/?kbid=326851
Windows activation: (888) 571-2048
(888) 725-1047 or 800-936-5700J W Stuart: http://www.pagestart.com
-
Windows 7 Build 7601 not genuine - but it is!
A month ago, I replaced my 5 + years computer's hard drive (an old Dell with Win 7 home premium), reinstalled windows (Yes, an authentic version) and went on my way happy. Yesterday, in the typical fashion of this error, the background went black and I get the small "Windows 7 Build 7601 this copy of Windows is not genuine" in the lower right corner. I also get popups from Windows telling me to validate my version, I tried and he repeated to me that it cannot validate it. I have downloaded and run MGADiag.exe, with the results displayed below (even if I took the liberty to remove the characters of the product key and the hash key, as I not sure if that can be used maliciously or not). Any help is really appreciated.
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->Validation code: 50
Code of Validation caching online: 0x0
Windows product key: *-* - xxxx - xxxx-xxxx
The Windows Product Key hash: + = xxxxxxxxxx
Windows product ID: 00359-OEM-8992687-00095
Windows product ID type: 2
Windows license Type: OEM SLP
The Windows OS version: 6.1.7601.2.00010300.1.0.003
ID: {E30E7703-44D5-4A92-B3C5-B6B9F333605A} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Home Premium
Architecture: 0 x 00000009
Build lab: 7601.win7sp1_gdr.150928 - 1507
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{E30E7703-44D5-4A92-B3C5-B6B9F333605A} 1.9.0027.0 6.1.7601.2.00010300.1.0.003 x 64 *-*-*-*-RMV82 00359-OEM-8992687-00095 2 S-1-5-21-2056526501-3500535325-2008384808 Dell Inc.. Studio XPS 8100 Dell Inc.. A05 20100708000000.000000 + 000D25E3307018400FE 0409 0409 Time(GMT-05:00) Standard is 0 3 DELL FX09 109 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7601.17514Name: Windows 7 HomePremium edition
Description: operating system Windows - Windows (r) 7, channel OEM_SLP
Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00359-00178-926-800095-02-1033-7601.0000-2892015
Installation ID: 011992763461409134893151619660815905216554797945636026
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: RMV82
License status: Notification
Notification reason: 0xC004F063.
Remaining Windows rearm count: 3
Trust time: 17/10/2015 05:44:07Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: n/a
Beyond: 0 x 0000000000000000
Event time stamp: n/a
ActiveX: Registered, Version: 7.1.7600.16395
The admin service: recorded, Version: 7.1.7600.16395
Output beyond bitmask:--> HWID data
Current HWID of Hash: MgAAAAEAAAABAAEAAQAEAAAAAgABAAEAln2cvgKfJvkcIVCZYj0QegTWqXlkZ2q5dlY =Activation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0 x 20001
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC DELL-FX09
FACP DELL-FX09
HPET DELL OEMHPET
MCFG DELL OEMMCFG
FX09 DELL SLIC
OSFR DELL-FX09
LASRYVITRAGE DELL-FX09
ASF! LEGEND I865PASF
SSDT DpgPmm CpuPmSelect Start, right-click on computer and select Properties. There is Activation of Windows at the bottom of the windows. Click on change product key and enter the product key (25 characters), and then click Nextto activate via the internet. The product key to be entered is to be found on the CoA sticker in the battery or on the underside of the laptop compartment. http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity
The key to enter has no RMV82, the last, five of the 25-character product key. KeyFinder software does not work on a Dell computer.
-
Win 7 genuine no - Build 7600 not genuine?
I activated Windows 7 once, now it is not authentic. Here's the report with what she stands.
Please advice.
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->Validation code: 0
Code of Validation caching online: 0x0
Windows product key: *-* - H4BT6 - XFCPH-74DTD
Windows product key hash: FXgrHCDTSdE14cDvm + K7uUBFkYM =
Windows product ID: 00371-OEM-9044202-08473
Windows Product ID Type: 3
Windows license Type: OEM System Builder
The Windows OS version: 6.1.7600.2.00010100.0.0.048
ID: {F6A2C724-6F48-4684-A08D-9ED4046015BE} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Professional
Architecture: 0x00000000
Build lab: 7600.win7_gdr.100618 - 1621
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: Registered, 2.0.48.0
Signed by: Microsoft
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program may Explorer\iexplore.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{F6A2C724-6F48-4684-A08D-9ED4046015BE} 1.9.0027.0 6.1.7600.2.00010100.0.0.048 x 32 *-*-*-*-74DTD 00371-OEM-9044202-08473 3 S-1-5-21-126284185-2496579430-2510528220 Dell Inc.. Studio 1735 Dell Inc.. A05 20081204000000.000000 + 000A7BB3607018400FA 0809 0409 GMT Standard Time(GMT+00:00) 0 3 DELL M09 109 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7600.16385Name: Windows 7 Professional edition
Description: operating system Windows - Windows (r) 7, channel OEM_COA_NSLP
Activation ID: e120e868-3df2-464a-95a0-b52fa5ada4bf
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00371-00180-442-008473-02-2057-7600.0000-2272010
Installation ID: 014845128390356363428611728261593235206825764553574002
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: 74DTD
License status: initial grace period
Time remaining: 2280 minute (s) on (1 day (s))
Remaining Windows rearm count: 3
Trust time: 15/08/2010 10:47:57Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: n/a
Beyond: 0 x 0000000000000000
Event time stamp: n/a
ActiveX: Registered, Version: 7.1.7600.16395
The admin service: recorded, Version: 7.1.7600.16395
Output beyond bitmask:--> HWID data
Current HWID of Hash: MgAAAAEAAwABAAEAAAACAAAAAgABAAEAeqioO5J0eE8GDJbszIoGQxrs2tikSUouKoU =Activation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0x0
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
REFERENCE DELL M09 APIC
FACP DELL M09
HPET DELL M09
STARTING DELL M09
MCFG DELL M09
M09 DELL SLIC
OSFR DELL M09
SSDT PmRef CpuPmHow to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone and waiting for someone to help you with activation.Also:
How to activate Windows 7 by phone
http://support.Microsoft.com/default.aspx/KB/950929/en=us
http://www.SevenForums.com/tutorials/18715-activate-Windows-7-phone.htmlMicrosoft Activation centers worldwide telephone numbers:
http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
(This site is for activating Volume License, but if you call, they will help you)Product Activation Solution Center
http://support.Microsoft.com/contactus/cu_sc_prodact_masterNever be afraid to ask. This forum has some of the best people in the world to help.
-
Windows 7 build 7600 this copy of Windows is not genuine. Can anyone help?
I changed the hard drives on my computer because my old computer broke down on me. Now, I get a Windows 7 build 7600 this copy of Windows is not genuine. Can anyone help?
You use a key of windows 7 OEM SLP but your bios has a marker of Vista.
Your bios date 17/02/2009 is too old for a marker windows 7.I suspect that you tried to move the license OEM windows 7 on another computer. An OEM license is not transferable.You can buy a new copy of windows 7.Additional information:Computers, which are built by large manufacturers provided with pre-installed Windows are supplied with 2 two product keys:
(A) OEM SLP: this key comes pre-installed in Windows, when it comes to the factory. This key is designed to work with the special instructions isn't on the hardware of this manufacturer. Then, when Windows was installed using the OEM SLP (in factory) Windows 7 key leans on the motherboard and he sees special instructions and activates. (that's why you had no need to turn on your computer after you brought it home)
(B) SLP COA: it's the product key that you see on the sticker on the side (or at the bottom, [or in the battery compartment]) of your computer. It is a valid product key, but must be used only in certain situations (for example, if the OEM SLP key stops automatic activation for a reason any). The key must be activated by phone. (Note: all manufacturers that use the SLP OEM system are bound by contract to include a certificate of Authenticity sticker (COA), which has a COA SLP key, on the computer)
-
Windows 7 Build 7600 this copy of Windows is not genuine - I can only run the computer in safe mode
My son - under Windows 7 Home Premium - Dec 2010 laptop, purchased at Future Shop
It has worked well for the past 2 years. Suddenly, on Saturday, he stopped doing anything.
That's happened?
I don't know, but when I started upwards, normally, all I get is the 'black screen of death", with the words"Windows 7 Build 7600 this copy of Windows is not genuine ".
I CAN'T DO anything HERE - can't make a right click, left click, CTRL ALT DEL, menu button - nothing worksSo I rebooted in SafeMode with networking - everything works fine.
I have tried many fixes - when I read the topics - but NONE OF THEIR WORK in safe MODE
slui.exe 4? Does not work in safe mode
Run? Does not work in safe mode
Start - computer - properties - activate windows now? Does not come to the top, in safe mode
However, he won't come to the top with a status or product ID
Starter - activate windows? does not work in safe mode
I tried to download the windows / microsoft / genuine / validate the tool - but guess what, that didn't work either - update installation failed - error information 0x8007043C - probably does not work in safe mode - but that's all I have As
I did a system restore - it 'worked' but ran very slow - and then when I restarted, the problem came back.
and many othersI ran Avast free on it - and anti-octets Malware - nothing - but I can only run in safe mode.
Avast has some programs that run on the system re - start - but it does not start in normal mode - if none of them workI read a lot of topics on this - and I'm VERY FRUSTRATED
I used another laptop - does the slui.exe 4 - and he asks me the activation key? I can't that - not in safe mode
I called the phone number - and talked to anyone - they told me to go through the www.howtotell.com - and report a counterfeit copy. But it's NOT a COUNTERFEIT copy.
OK - it's perhaps - but why it worked for 1.5 years? And I bought from FutureShop, so should be reliable. And I have the certificate of Authenticity on the backDon't forget - I can't do anything either in normal mode - but the Safemode with network works perfectly well.
So, I don't know what to do.
I don't think that's my problem - I bought a genuine copy, a reliable retailer.
Anything you can do to help, would be greatly appreciated.I agree with this assessment.
Hard drives come with a large number of spare sectors 'invisible' - it's only when they all well used by repair mechanisms built-in to the reader that the number of bad sectors Windows begins to increase from zero (in your case, it is a sector) means that there is already a significant degradation of the drive, and you can expect the count to start sooner or later back.
-
Help, please. the lower right corner of the screen says windows 7 build 7600. Windows 7 not genuine. I have a black screen and I have no internet connection. Help, please
Have you tried to restart by phone?
Activate Windows 7 manually:
1. click on start and in the search for box type: slui.exe 42. press enter on your keyboard
3. Select your country.
4. Select the telephone activation option and brace yourself for a real person.
http://support.Microsoft.com/kb/950929/en-usPlease run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
http://go.Microsoft.com/fwlink/?LinkId=52012 -
Windows 7 not genuine after cancellation of technical preview Windows 10.
Hi after installation of the technical preview windows 10 downloaded from the official site, I decided to use the rollback option to get my windows 10 ultimate 64-bit.
After doing this without error as I get to my office, as it is said in the lower right of windows 7 build 7600 this copy of windows is not genuine it wasn't there until I installed windows 10. I ran the real application of validation he said that it was not authentic I typed in the key at the bottom of my laptop its OEM is not supposed to work I know but I tried anyway did not (big surprise! I know) so what can I do? No way I pay £299 for a new key. I bought this laptop on TradeMe from a business, that it's a HP elitebook barely used 8530p.
Download and run the Microsoft Genuine Advantage Diagnostic Tool:
Download the tool: http://go.microsoft.com/fwlink/?linkid=56062
Post your results (copy button) and paste the results in your answer.J W Stuart: http://www.pagestart.com
-
Windows 7 build 7600 it is not authentic
Hello
I've just loaded my computer hp pavillion laptop and in the lower right corner of my screen it say "windows 7 build 7600 it is not authentic" I don't know what it is or what it takes please help she also asks me to enter a product key, but I did not like everything has been preinstalled on it
much thanks collette
Hello
Yes. It makes more sense.
You must make the option "activate by phone". Start the activation process. There should be a link in the task bar.
The following number is the line of Microsoft Windows Activation
1-866-530-6599
This Microsoft web page has a lot of frequently asked questions that should help you.
Best regards
ERICO -
Windows not loading after system reboot after installation of the last security update.
Windows not loading after system reboot after installation of the last security update. Have you tried last known good Configuration, Safe Mode, neither of her works.
No matter which option to choose, it comes to me to the BIOS boot screen after 5 seconds in loading Windows.
Running Windows Vista 32 - Bit with SP2 installed system. 2 GB OF RAM. Intel G31 Mobo.
Dated this February 11, 2010.
I managed to restore my Windows to previous restore point, using the CD of Vista to start, and then select repair Windows. I hope this helps.
-
Just upgraded Vista Home Premium to Windows 7 Home Premium with the version updated official (box set). Update went well, but I now have a "Test Mode Windows 7 Build 7600" watermark in the lower right. I entered the activation during the installation, and there is no section in the control panel to activate manually, so I guess the activation went well. How can I get rid of this watermark?
You can deactivate the Test Mode by typing bcdedit/set testsigning in the command prompt.
If the command above does not work, try:
Open again (run as administrator) command prompt and type the following command:
bcdedit.exe - set loadoptions ENABLE_INTEGRITY_CHECKS
bcdedit.exe - set off the TESTSIGNINGSee you soon! Life sucks! Get used to it.
-
Windows 7 Build 7601 not authentic on brand new computer
Purchased my Lenovo to Fry mid October 2012. Have already experienced several BSOD right after that MS updates were installed every time. A few days ago, I met several BSOD right after that the Windows updates were installed. On the last BSOD, I get the message Windows 7 Build 7601 not authentic. Nothing I tried as suggested on screen worked, amounts to the same thing. I am a student full time online. Fall semester ends on Sunday, December 16, and I'm way now behind on all my homework back and my final exams in all categories. It does not help and I have not the time to take my computer to Fry for them to take a look. All my data is stored here. In addition, I tried to restore to another time, when you restart the message was still there then I turned off and when rekindled later it had disappeared, but returned for the next day. I tried to restore againn but this time it won't go away. I don't know where my product key is, as it is not on the computer itself. It may be on a manual but I have since moved and had the movers help me and they put things in the back of my storage unit or in boxes not recognized. So until I go through everything in my storage unit I'm screwed. Please help as soon as possible because it's really me screwing.
Thank you
Denise
You install the driver from Windows Update updates?
If so, I would avoid their installation in the future and instead to download any available hardware updates directly from the manufacturers Web site.
I also suggest that when you get a new computer and you start for the first time, you must create a system restore point.
As each new Windows 7 PC should come with a COA sticker that is attached to it, this is one evidence of a genuine license installed on the machine. If you bought it on shelf, its possible someone could have pulled off the sticker.
Always check for a real sticker or buy any of the machine.
It seems that you have bad luck with Fry, FRY well their business and the purchase of another where, there is nothing particularly special to their topic. Try to buy directly from the manufacturer online or try another store, if you live close to a Microsoft Store, you can go.
Sorry for all the problems that you are experiencing, we are just volunteers here who are trying to help other users of Windows.
-
Windows import program does not close after you import photos from a camera.
Windows import program does not close after you import photos from a camera. It is frozen on the desk and the computer must be restarted to use the program again, windows does not detect a problem, how to fix it.
original title: importer of photo and video for windows
Hello
1. which version of the operating system is installed on the computer?
2. don't you make changes on the computer before the show?Method 1:
You can perform a clean boot and check if the problem occurs.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.
Method 2:
Alternatively, you can change settings for importing pictures and videos in windows by following the steps from the link.
http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-importing-pictures-and-videos -
Windows 7, build 7600 this copy of Windows is not genuine
I have been using Windows 7 for 10 June & had no problems; activation, went without a hitch. After my last update, my office told me that my system is not authentic. I read a few posts & reported a diagnosis, but am not very computer savvy. I did a system restore to a date before the update but it did not do anything & windows won't let me not uninstall updates. Can someone please help. Thank you very much
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->
Validation code: 50
Code of Validation caching online: 0xc004c4a2
Windows product key: *-* - H9FBX - 2CVDW-94TD6
The Windows Product Key hash: Xya15clpOael15pjFE4jSE/IUGG =
Windows product ID: 00426-067-7939392-86532
Windows product ID type: 5
Windows license type: retail
The Windows OS version: 6.1.7600.2.00010100.0.0.001
ID: {BEA76911-E5EF-40A1-A890-8FED0BBED10C} (3)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Ultimate
Architecture: 0 x 00000009
Build lab: 7600.win7_gdr.100618 - 1621
TTS error:
Validation of diagnosis:
Resolution state: n/a
Given Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002
OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002
OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files (x 86) \Internet Explorer\IEXPLORE.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowed
Analysis of file data-->
Other data-->
Office details:
{BEA76911-E5EF-40A1-A890-8FED0BBED10C} 1.9.0027.0 6.1.7600.2.00010100.0.0.001 x 64 *-*-*-*-94TD6 00426-067-7939392-86532 5 S-1-5-21-1210769799-4249533129-1177393129 Gigabyte Technology Co., Ltd.. P55A-UD3R Award Software International, Inc.. F7 20100211000000.000000 + 000D8BA3607018400FE 0c 09 0409 E. Australia Standard Time(GMT+10:00) 0 3 109 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7600.16385
Name: Windows 7 Ultimate edition
Description: operating system Windows - Windows (r) 7, retail channel
Activation ID: a0cde89c-3304-4157-b61c-c8ad785d1fad
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00426-00172-067-793939-00-3081-7600.0000-1602010
Installation ID: 013501326331347303056403564310684636198561493293329815
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: 94TD6
License status: Notification
Reason for the notification: 0xC004F200 (non-genuine).
Remaining Windows rearm count: 3
Trust time: 2011-01-04 18:36:41
Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: 0xC004C4A2
Beyond: 0 x 0000000000000000
Event timestamp: 12:22:2010 08:32
ActiveX: Registered, Version: 7.1.7600.16395
The admin service: recorded, Version: 7.1.7600.16395
Output beyond bitmask:
--> HWID data
Current HWID of Hash: PgAAAAEACAABAAEAAQACAAAAAgABAAEA6GHikQx3QsaSPJSKagN2jShgKAuAlgheeJN8h5qIkOFAoL6LdlY =
Activation 1.0 data OEM-->
N/A
Activation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes, but no SLIC table
Windows marker version: N/A
OEMID and OEMTableID consistent: n/a
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC GBT GBTUACPI
FACP GBT GBTUACPI
HPET GBT GBTUACPI
MCFG GBT GBTUACPI
EUDS GBT
TAMG GBT GBT B0
SSDT INTEL PPM RCM
Start a new thread in the following Microsoft Genuine Advantage forum and paste the results of the diagnosis of MGA tool in your post, and a clear description of your problem:
http://social.Microsoft.com/forums/en-us/genuinewindows7/threads
Troubleshooting specialist will analyze the data and recommend an appropriate solution.
-
"Windows 7 Build 7601 this copy of Windows is not genuine" after several teething problems
Well, a few days ago, I had repeated problems where after my machine has started, things were not running right. Several programs that start automatically at startup were suspended, others were not run at all and I had to reboot several times in a row until I was a session that would normally be. This last day, he won't even be me a normal session.
And then I got the dreaded error "this copy of Windows is not genuine" and it starts just a black screen and I do not get any further. (I started this time in Mode safe mode with networking). I have a disc of Win7 Pro DVD bought Age of return and progressed through several machines with it. Always a machine at the same time, of course.
MGADiag output follows.
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->Validation code: 50
Validation caching Code online: n/a, hr = 0x8007043c
Windows product key: *-* - 63PWH - 7827 D-H6DXC
Windows product key hash: 0Eb + 4si3XqLKounuUi41qzHBtps =
Windows product ID: 00426-OEM-9154295-97930
Windows Product ID Type: 3
Windows license Type: OEM System Builder
The Windows OS version: 6.1.7601.2.00010100.1.0.001
ID: {1C2298F9-ADDF-430E-A50E-B8F1D185EBF5} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: Registered, 1.9.42.0
Signed by: Microsoft
Product name: Windows 7 Ultimate
Architecture: 0 x 00000009
Build lab: 7601.win7sp1_gdr.150928 - 1507
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{1C2298F9-ADDF-430E-A50E-B8F1D185EBF5} 1.9.0027.0 6.1.7601.2.00010100.1.0.001 x 64 *-*-*-*-H6DXC 00426-OEM-9154295-97930 3 S-1-5-21-118719561-41743233-1106231141 MSI MS-7693 American Megatrends Inc.. V2.0 20130107000000.000000 + 00039A23507018400F2 0409 0409 Time(GMT-05:00) Standard is 0 3 109 Content Spsys.log: 0 x 80070002
License data-->
On a computer running Microsoft Windows non-core, run ' slui.exe 0x2a 0x8007043C' to display the error text. "
Error: 0x8007043CWindows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: n/a
Beyond: 0 x 0000000000000000
Event time stamp: n/a
ActiveX: Registered, Version: 7.1.7600.16395
The admin service: not registered - 0x8007043c
Output beyond bitmask:--> HWID data
Current Hash HWID: LgAAAAEABAABAAEAAAAAAAAAAQABAAEAHKJqUfyIVPIQM9qMgApc5ZQ3TjBudQ ==Activation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes, but no SLIC table
Windows marker version: N/A
OEMID and OEMTableID consistent: n/a
BIOS information:
ACPI Table name OEMID value OEMTableID value
ALASKA APIC HAS M I
FACP ALASKA A M I
HPET ALASKA A M I
ALASKA MCFG A M I
FPDT ALASKA A M I
SSDT AMD POWERNOW
IVRS AMD RD890SWell, it's flipping strange... NOW everything is back to normal. oO that everything started automatically starts very well and not more "this copy of Windows is not genuine" message. I didn't have anything under the hood to fix, he has finally decided to go back to normal. :/
Maybe you are looking for
-
How can I stop "you want to allow Firefox to make changes to your computer?
I started to download Firefox 4 and do not think that it has finished. 3.16.6 just downloaded again, but when I open Firefox it still says "do you want firefox to make changes to your computer. What I have to delete something and start again?Cheryl
-
Problem syncing iTunes for iPhone 4S
I tried to fix this problem for a while, and I'm getting desperate. Even the guy on the phone to help Apple could not help. I use my iPhone 4S 64g with Windows 8. Problem is that I download a CD in iTunes on the PC. I can see and play songs downloade
-
Cannot load Windows 7 computer MS Flight Simulator (Deluxe).
Failed to load in the new computer with Windows 7 OS MS Flight Simulator (Deluxe). There has been repeated warnings for missing files. Press 'Retry' and it seemed to switch to disk 2. When almost finished, he said, he could not find the DLL file a
-
PIXMA Pro 100 color space issues
Hello I have a few questions related to printing from lightroom, I'm new on this bare with me. (1) I have a canon 7 d I shoot in Raw 12-14 bit? and most of my treatment is done in lightroom, so no need to export to photoshop, however if I would be th
-
How can I copy cassettes to my computer to create a CD?
I have a tape recorder, but it does not copy on a CD. Can I use my laptop to do? I plugged the headphones outside on my tape drive and the other end of the cable is a stereo PIN. I was told to put it into the microphone of my laptop. Now what sho