Windows 7 can't detect the wireless printer

I recently bought a Canon MG5250 1 wireless printer while. I got it connected to my router according to the Canon instratuctions, I have a laptop with XP that I have completed the installation with a CD, it detects the printer and print wirelesly without any problem. I can ping the IP address of the laptop XP.

However, I have a 32 bit Windows 7 laptopn which can print on the MG5250 via USB but the installation CD does not detect this wirelesly, he cannot ping the ipaddress either. I tried to install with all firewalls and the disabled antivirus scans and network settings are set to automatically detect the network. I have connected to many networks account invited to the clients and Hotels without problem.

Can someone help me please?

Hello
Please see this thread.

http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Canon-software-for-MG5250-printerscanner-wont-work/dadab50e-1021-4F03-bf00-261929e1317b

Follow the two links in the response from Imran and you should be good to go.

I hope this helps.

Tags: Windows

Similar Questions

  • Can't detect the wireless, gateway 4025gz. mod, turn on wireless, Dosnt show the icon in the login screen. OK before wipjng drive.

    Can't detect the wireless, gateway 4025gz. mod, turn on wireless, Dosnt show the icon in the login screen. OK before wipjng drive.

    If it worked before wiping the disc, then it is likely, you are missing a player specific to material not included in WIndows XP.  Log on to the gateway website and download the drivers for the chipset and network.  Naturally, you will need to use a wired network connection.

    In general, Gateway provides the drivers specific to the hardware on a recovery of the system partition, and they also provide a tool so you can burn data on CD/DVD restore.  Do you stil have this partition or did you remove it?

    Every time I buy a PC, I always download copies of the material of the web site of the vendor-specific drivers and keep them on a flash drive, so that they are available when I wipe a PC and reinstall.  I also do the recovery partition recovery disks.

  • HP 15 D103tx: can't detect the wireless network adapter in Device Manager.

    I can't detect wireless network adapter in the device even Manager after installing the drivers wireless from the following link: http://support.hp.com/in-en/drivers/selfservice/HP-15-d100-Notebook-PC-series/6782098/model/6837966?...

    Wireless "F12" key remains orange color after pressing it several times. I tried to install "Drivers HP wireless button" from the link above, but between th installation process I have error ot OS isn't accomanied for pilots

    I can't connect to a wireless network from my wireless adapter doesn't work. I have to sit near my wifi router to connect with laptop computer using lan cable.

    Even HP Support Assistant does not detect the wireless network card hardware

    Help, please!

    Hello

    According to HP Partsurfer, your lapotp came with Atheros AR9565 802.11bgn 1 x 1 WiFi and Bluetooth 4.0 adapter combination WLAN. Also, your laptop came with FreeDos and I guess currently installed Windows 8 64 bit OS, I am correct?

    The Support page for your machine, doesn't show that the Realtek RTL8188EE 802.11b/g/n Wireless LAN Driver for Windows 8.

    Please download, save & install the Dirver and restart the system, check if the wireless works.

    Concerning

    Visruth

  • Satellite L300D cannot detect the wireless printer

    Bought an advent AW10 wireless printer that is connected to my router from sky.
    The laptop cannot detect if. I managed dected on netbook to my daughter so I know this isn't a problem with the printer or router and I also tried detect it with the firewall disabled to rule out the possibility of being blocked.

    Does anyone have other ideas?

    The interest to buy this printer was so that it can be connected wireless to want do not connect through a USB cable.

    Hello

    Have you turned on the WiFi on the laptop Toshiba successfully?
    You must move the switch wireless POSITION until led WLan would be on and must use the FN + F8 option to select Wlan.

  • Desktop computer can not detect the wireless router, even with adapter

    Hello

    I broke my laptop so I got out my old office since 2003. Its a gateway computer. There was no place where to connect my internet wire so I went out and bought a usb wireless adapter and updated my computer to Windows XP Home Edition. I put the CD and went through the Hardware Wizard. I said to her work and connected to the internet on the adapter set up the screen. BUT I can't access the internet. I tried the wizard network wireless, but sound does not detect anything either and does not work when I try to do it manually either.

    Help, please. I can't afford a new laptop close to Christmas it :(

    Hello

    • You have security software installed on the computer?

    I suggest to access the link below and follow the steps in the article to resolve the problem of connectivity wireless network on your computer and check to see if it helps you solve the problem.

    http://support.Microsoft.com/kb/870702

    You can also navigate to the link below and follow the steps in the article to set up the connection Wireless on your computer.

    http://www.Microsoft.com/windowsxp/using/networking/setup/wireless.mspx

    I hope this helps. Let us know the result.

    Thank you and best regards,

    Srinivas R

    Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • laptop can't detect the wireless network

    I have a laptop Windows 8 now 8.1 pavilion g6 which was not able to detect wireless networks.

    When I try to solve the problems to find a problem it says that there is no problem.

    Icon in the lower right shows a monitor with a white cross in a red circle background and has what looks like a cable with a circular head up.

    What I am currently using is the ethernet cable to the laptop that is connected to the router which works normally.

    Any help will be appreciated, because I need this problem sorted as soon as possible.

    Thanks for the reply. While at the time, I have checked devices and other suggestions I've found by using search engines, it seems that he has not solved the problem.

    However, I am happy to say that it is now back after I did a system restore which did not take long to complete.

    The main problem was he doesn't detect any type of wireless signals and could not get on the internet via an ethernet cable.

    I think I can avoid windows 8.1 where there my laptop slowed down considerably since its installation, which can be made wireless connectivity. A problem I have never using 8.

    Thanks again for the advice.

  • Creating Windows DVD - can not detect the DVD burner.

    When I start Windows DVD Maker, my DVD drive on my Lenovo 64 bits Y460 can not be detected. When I click the selector drop down menu on the upper right corner drive, a blank is displayed. When I try to burn, the program says that a DVD burner can not be found, sign in, and then install etc... How can I fix it?

    You have a 3G modem or another attached flash drive? My Huawei modem was somehow interfering with Windows Media Center/DVD Maker detect my DVD burner. As soon as I unplugged the problem disappeared. If I reconnected it during the burn process, it does not immediately!

  • Windows 7 can't detect the TOSHIBA Portege M400 RAID driver

    I put to level my M400 tablet from Windows XP to Windows 7.

    Questions of compatibility check out, all right. In research I realized I needed to upgrade the RAID driver to a version of Win7. So I downloaded which, from my external hard drive to install to Win7, and installing Win7 can't find it. I tried the same thing with a variant of Vista with no luck. Even through the installation on the hard drive itself, nothing happened. Impossible to get in the tio silent run command prompt, absolutely nothing. I'm back where I throw this computer out of my 4th story window.

    Any help please?

    Hello

    Where did you download the RAID driver?
    Please try to download the RAID driver on the Toshiba site directly. These drivers are pre-tested and should work on your laptop too.

    The older Portege M400 taken Windows 7 isn't supported so in the worst case, you can t use it.
    But normally the drivers should work on Vista so make sure you are using the correct driver.

  • Photosmart C6180 cannot detect the wireless network

    I have a Photosmart C6180 for over a year, and until recently it connected wireless very well.  But since a week ago, it can't detect the wireless network.  I turned off the printer and wireless router several times each without success.  The "Wireless Setup Wizard" running on the C6180does not help. Watch simply screen printer "looking for... wireless router. "indefinitely, until the function Cancel.  The wireless router is about four feet from the printer, in a direct line of sight.  In addition, I have wireless Internet access using the same router and continue to do this successfully, then the router itself works.  Recently I have updated the firmware on the router as well (after the beginning of this problem).  Running the network Test report wireless on a 'PASS' C6180 returns for "Radio on" but a "FAILURE" for "use of Radio". The radio broadcasts as "about" section of the Menu Radio wireless network.  My router is a Belkin Wireless G Router model F5D7230-4.  The printer prints very well with a wired connection, but wireless connectivity has been a key reason behind my purchase.  Any suggestions greatly appreciated.

    Sorry, but your wireless radio is dead.  Its time for a new printer.

  • Cannot connect Windows XP to the wireless printer.

    WINDOWS XP PRINTER WI - FI CONNECTION

    I have Windows XP Media Center Service Pack 3 OS that worked a HP Photosmart Plus B209 a - m with a USB cable.  Since I just bought a new laptop (Windows 7 Professonal OS) I decided to create a home network with a router Cradlepoint MBR 900.  The two laptops (XP and 7 OSs) were connected to the internet via the router with no problems.  Windows 7 Pro OS laptop is connected wireless to the printer Photosmart Plus, I had implemented as confiquiration wireless the printer first.  But the failure of the attempt to get the OS Windows XP Media Center to connect to the wireless printer.  During the installation process to connect the printer to the XP system wireless it asked me to choose which printer I wanted to connect to.  The Photosmart Plus printer was selected and visible, then I clicked Next.  Shortly after, a small screen appeared stating the "serscan.sys" file could not be found and I have to insert a Windows XP Pro CD to get the file or run the installer of this file.  This issue has occurred both when I tried to install it with the CD provided by HP and when I tried installing the HP download website.  All I have is a recovery for Windows XP disk provided with the laptop and not a CD Windows XP Pro.  What should I do to fix this?  Thanks, Lonnie

    Thanks, that was fast.  Please, let me make sure I have this correct.  First of all, I have two recovery disks provided with the computer, with Windows XP Media Edition and one for the drivers.  I should not use either of these disks, right?  If I had the previous correct answer then let me ask the following question;  When looking to borrow the disc should be Windows XP Media Edition or can I borrow any disk of Windows XP?  Kim Merci for your help continues.  Lonnie

    Lonnie,

    Before the hunting around for friends who might have a CD, do the following research.  For each of them, make sure that you have checked the search options in the 'Advanced Options' to

    • Search system folders
    • Search for files and hidden folders
    • Search subfolders

    Search your entire hard drive and both CDs you have to serscan.  Do not include the .sys at the end of the file name.

    Search for Driver.cab.  Report of the Office (s).  On your hard disk, you should find one or both

    • C:\Windows\i386\Driver.cab
    • C:\Windows\Driver Cache\i386\driver.cab

    You can also find these files on the "recovery disk".

    Report what you find, including locations of found nothing.  It is possible (but I don't think likely) you will find a file named serscan.sy_ - If Yes, include this information in your results.

    Or, if you want to ignore all this, you can download serscan.sys since my SkyDrive-->

    https://SkyDrive.live.com/redir.aspx?CID=18b259158254905b&RESID=18B259158254905B! 225 & Thierry = 18B259158254905B! 214

    The file should go to C:\Windows\system32\dllcache (a hidden directory) and probably in C:\Windows\system32 (I do not use this file, if it is not in my system32 folder).

    Or you can just save it to your desktop and "direct the Setup" it there (if you do this, check more later to confirm that he got into C:\Windows\system32\dllcache and if not, put a copy).

  • I have my laptop can't detect a wireless adapter or access point. It shows that the network connection is excellent but I can't always connect to the internet.

    I have my laptop can't detect a wireless adapter or access point. It shows that the network connection is excellent but I can't always connect to the internet. It happened suddenly and with no warning or cause. I tried to turn off the modem for 10 seconds and turning it back on, but I still had the same problem. What should I do? Help, please.

    Hello

    Maybe this can help, http://www.ezlan.net/wireless.html

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • Wireless laptop can not find the wireless Officejet 6700 printer

    My laptop can't find my wireless printer Officejet 6700.  Printer is on the wireless network but the laptop cannot find it.  Laptop the wireless.  Have cisco router on my NBN skymesh satellite.  Have you tried printer setup in the control message panels reads:-printer is not found.  Using windows 7.  Have tried to use scan doctor, turning his router unpluging printer and electrical power to the router. Still no luck.  Printer is about 1 meter portable.  Do I have to set up a home network and connect like that.

    If you can easily plug the printer into the router using an Ethernet cable, who always beats wireless!  Try it!

  • Windows 7 will not detect THE routers wireless, including mine.

    Windows 7 will not detect THE routers wireless, including mine. I inserted the cd of restoration of the system, and after that he picked up no internet. No, even if I connect it with the wire! Help!

    Hello

    Thank you for contacting Microsoft Community.
    Is properly installed wireless adapter driver?
    Go to start-> type devmgmt.msc-> press on enter. In the Device Manager window, expand network adapters. You should be able to see a list of network adapter as Ethernet, Bluetooth, etc. Make sure that you can find the adapter wireless from the list. If so, double-click it. Properties windows will be open. On the general tab, under device status, if it shows that the device is not functioning properly, please remove the case, locate the wireless network card and make sure the connections of antennas are coneected correctly. If even a connection is not properly connected or damaged, you cannot connect to any WiFi network.
    Response if the issue is not resolved.
  • RT of Windows cannot locate the wireless printer

    I have a new Surface Windows RT (not 8.1) and I'm unable to connect to my printer wireless on my home wireless network.  The printer (Brother MFC-J625JW) is listed as a compatible printer Windows RT by Microsoft and brother.  My printer is on, visible on my laptop Windows 7 via the wifi network and works normally.  The Surface is connected to the same network.  I entered in the control panel > adding a device.  The printer does not appear in the list.  In fact, the only thing that appears in the list (momentarily) is someone from another PC - but not my printer.   How can I get the Surface to find my wireless printer that seems to operate other devices normally and is on the same wireless network?  Thank you.

    Success.  The wireless printer now appears in the "Devices list".    The breakthrough came after installing the Windows Update screen Firmware updates.  I had already updated for Windows RT 8.1 (after my original message) from the window Store (free), but that has not fixed the problem.  I then went in the Panel, search the Windows updates.  Windows found 27 updates of firmware update that it installed.  2 reboots are needed.  After that, the printer has appeared in my list of devices.

    In response to your questions:

    1. & 2.   You are right: it is the MFC-J625DW.

    3. never checked directly connect USB since the Surface RT (now 8.1) was showing the printer.

    Thank you.

  • Windows Vista detects the wireless network but will not connect to it. Two other users in the same office connect without difficulty.

    The title says it all really.

    I was connected and working normally for about an hour this morning, until suddenly the connection has been lost.
    Windows detects the wireless network but will not connect. Two other users in the same office connect without difficulty.
    Help, please.
    Thank you.
    original title: vista detection network but will not connect

    Hi JulianBeach,

    1. you have made no changes to the computer before the broadcast took place?
    2. What is the exact error message you get?
    3 is connected to the domain of the computer?
    4. what happens when you try to connect to the network?

    Try the steps from the following link:
    Windows wireless and wired network connection problems
    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Additional information:
    Wireless network card: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

Maybe you are looking for