Windows 7 cannot complete installation, halfway, it stops and gives me the message "windows Setup could not configure windows for the hardware on this computer.

Windows 7 cannot complete installation, halfway, it stops and gives me the message

"windows Setup could not configure windows to run on a hardware on this computer.

If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

Tags: Windows

Similar Questions

  • I'm putting SFC and @ 57%, it stops and it displays a message that it could not perform

    I have bsod problems. I'm putting SFC and @ 57%, it stops and it displays a message that it couldn't perform... When activated the journal CBS found that it always stop here:

    2010-07-09 18:08:19, CSI 000000ec c0000185 (F) error [error, installation = (System), Code = 389 (0 x 0185)] #2332033 # Windows::Rtl:, evt = 0, apcr = NULL, apcc = NULL, iosb = @0xc8e64c, data = {b: 0}, byteoffset = 0, key = (null))
    [gle = 0xd0000185]
    2010-07-09 18:08:19, d:\longhorn\base\wcp\sil\merged\ntu\ntsystem.cpp(1947) 000000ed@2010/7/9:23:08:19.581 (F) CSI of the error: error c0000185 [error, installation = (System), Code = 389 (0 x 0185)] from the function expression Windows::Rtl:SystemImplementation:DirectFileSystemProvider:SysReadFile: (null)
    [gle = 0 x 80004005]
    2010-07-09 18:08:29, error CSI 000000ee c0000185 (F) [error, installation = (System), Code = 389 (0 x 0185)] #2332032 # to Windows::Rtl:SystemImplementation:CFile_IRtlFileTearoff:ReadFile(Flags_=_3,_Buffer_=_{l:0_ml:65536_b:},_Offset_=_0,_Disposition_=_0) [gle = 0xd0000185]

    Made a couple of times and always stops here. Check the disc and is ok. Ran memory diagnosis and ok. What can I do now?

    If SFC finds serious errors that it cannot repair, you may need to do a upgrade Vista repair install.

    If you do not have a DVD of Microsoft Vista, borrow one from a friend.

    Read this tutorial on how to do a repair installation:

    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

    See you soon.

    Mick Murphy - Microsoft partner

  • Cannot complete installation of Firefox 34.0.5. The installer of Mozilla Firefox crashes at the creation of shortcut (.lnk Mozilla Firefox) (see downloaded the image)

    Cannot complete installation of Firefox 34.0.5. The installer of Mozilla Firefox crashes at the creation of shortcut (.lnk Mozilla Firefox) on the status bar of the installation window. OS: Windows 8.1 system had old version of Firefox, but is no longer in the list programs. There is no file helper.exe manually uninstall any previous version or remnant of an older version, but I don't have folder C:\Program Files (x 86) \Mozilla Firefox to. Thank you.

    Try this:

  • Windows Setup could not configure Windows on hardware of this computer Installation error on the new hard drive

    Okay so if please bear with me and be patient.  I'm not tech savvy.  I know enough to be able to remove an old hard drive and put another one, but when there are errors, I don't know what to do.

    Here's the situation.

    I have a Dell Studio XPS with Windows 7 installed.  I started having these notifications that my hard drive could be a failure.  I tried everything that I could find to fix it without having to buy a new HARD drive without success.  The current system has a 1 TB Seagate hard drive.  I installed a memory additional bar thingie right after that I got the computer about 4 years ago.  (If someone tells me how to find the properties of real system, I post them if necessary).  Anyway, I bought a new WD 1 TB black disk hard to install before my old dies and loses all my photos and documents, etc...

    I took the old drive yesterday and installed the new hard drive.  I put back the case and turned on the machine.  I put in my Windows 7 installation disc.  He began installing Windows 7... It's completely past the initial screen where it says it to load it and the other... I had accepted the license agreement, but did not have to make a profile and do the work and the reader.  I hope all this makes sense.  Then it pops up this message "installing Windows could not set up Windows on hardware on this computer."  I couldn't figure out what to do from there.  I got the new drive and put the old one back to and here I am. I tried to find solutions to this problem, but I either don't can't make heads or tails out of the responses on the internet or the solution is not exactly my problem.

    Please help if you can!  And if you have any suggestions, please dumb them down so I can understand what to do.  I CAN do if loaded, you just have to not talk too irritable.  Laughing out loud

    Thank you in advance!

    Maybe not...

    The Windows installation is not happy about something, and since it gets at least started which is a good thing, but your installation problem can not really be with Windows - perhaps something about Dell hardware or your 1 TB HARD drive.

    I looked at your system and found this article that you can read to see if it sounds like your original question:

    Windows Setup could not configure Windows on hardware on this computer.

    http://www.Dell.com/support/article/us/en/19/SLN293812/en

    Since Dell has written an article for help on this subject, it means they've met enough times to take the time to compose the article and put it on their WWW site (but, they say, it is a possible resolution).

    Could you take the issue in the Dell online community where experts hang out (especially your amber light).

    Another good place for support is www.bleepingcomputer.com where there is a similar topic as your question (except Vista) on a Dell and a new disk of 1 TB (also a Seagate) and Dell ideas did not work, but someone else has found a way to fix it:

    http://www.bleepingcomputer.com/forums/t/453378/installation-fails-to-complete-on-new-HDD/

    The bleepingcomputer for your error message search reveals other areas and people who have got things to work in different ways, then it is perhaps another place to look for ideas.

    If the installation still fails it would not hurt to do the BIOS setting and see if things are getting longer, and since you are going to write the current settings before proceeding with the adjustment you can always cancel the adjustment if things get worse.

  • HP Pavilion dv6-7028tx Enterta: Windows Setup could not configure windows to run on this hardware

    As I tried to reinstall win 7 on my laptop HP Pavilion dv6-7028tx, the competition, Enterta I received this message by win7 saying that «windows Setup could not configure windows on this computer hardwear»

    I did some research on this issue, it seems to be the lack of SATA drivers on my computer.

    Could you please tell me which intel SATA driver should I install to fix the problem?

    If this method does not work, then please can you me how to change the hard drive in AHCI or IDE BIOS setting?

    Thank you very much

    Hello:

    You cannot change the drive controller setting in the BIOS on any HP laptop consumers made in the last 5-6 years.

    See if it works...

    Download the drivers from this link below (first listed file - 64-bit).

    https://Downloadcenter.Intel.com/Detail_Desc.aspx? AGR = Y & ProdId = 2101 & DwnldID = 23060 & keyword = Intel + Rapi...

    Extract (copy) the files on a USB FlashDrive without all records.

    With the flash player and support installation of W7 in the machine, boot from the installation of W7 media.

    After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

    You should now see the storage driver files listed.

    If you check the box, it only includes the compatible driver.

    Follow the prompts and I hope, will install W7.

  • Windows Setup could not configure windows to run on this hardware

    I am trying to install Win 7 on a HP Pavilion dv6-7012tx laptop. He brings Win 7 by default. I installed win8 once. Now I can't reinstall win7 on laptop in May. He tried to install Windows 7, but when the computer restarts and tries to complete the installation, I get the following error: "Windows Setup could not configure Windows to run on hardware of Cet_Ordinateur."

    My laptop configuration:

    By default the operating system: Win7

    Processor: Intel 2nd generation Core i5

    GPU: NVIDIA GeForce 630 M

    Hard disk: 640 GB (SATA II)

    RAM: 6 GB DDR3

    Hello:

    If you use an ordinary W7 installation DVD and use no recovery disc, the most common cause of this error is the lack of SATA drivers.

    Download and extract these files on a usb flash drive. First file listed is for W7 64 bit.

    https://downloadcenter.Intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=23060&Keyword=Intel+Rapid+Storage+Technology+(Intel+RST) & lang = fra

    Plug the flash drive into your laptop and start your installation of W7 DVD.

    When you get to install it now click on that and click the option advanced player options.

    Then choose load a driver.  You should now see all the sata on your USB drivers.

    You can check a box and it will include the compatible sata driver to install.

    Proceed from there, and I hope that will install W7.

  • HP dv6 7214tx: windows Setup could not configure windows to run on this hardware

    Hello

    I know it has been posted similar problems before, but I still can't get on my instalation.

    I came to this point: during installation PROCESS, almost at the end of this message pop up "'WINDOWS Setup COULD NOT CONFIGURE WINDOWS TO RUN on THIS COMPUTER HARDWARE".

    My PC is: ENVY dv6 7214tx

    3rd gener. Intel Core i7-3630qm

    processor 2.4 GHz

    1 TB HARD DRIVE

    8192 MB DDR3 SDRAM

    Blu - ray optical drive

    Windows 8

    NVIDIA GeForce graphics card

    WLAN & Bluetooth

    I changed boot to the DVD - ROM option, SUPPORT of LEGACY enabled, disabled SECURE BOOT.

    What it might useful to you guys, it's the actual installation takes apx. 5 hours, then he came to the point of pop up window mentioned above.

    Do you have any suggestions please?

    Thank you very much

    .. .also even if this driver has been loaded to the top, another window pops up and says smth like "the driver is not signed, and it might not work.

    However, I let it install... I'll see

  • Windows Setup could not configure windows to run on a hardware on this computer

    HP Pavilion Sleekbook 15-b023cl

    I tried to install Windows 7 on my computer for the last day and after several attempts the same error message. It is said: "Windows Setup could not configure windows to run on a hardware on this computer." How would I go about fixing this problem?

    Thank you

    Hello:

    I'm not sure that there is a 'one size fits all' answer to this problem, if you google the error.

    The most common solution is to try to install the SATA driver.

    Here is the link to the SATA drivers you need for your model. Download and extract to a usb flash drive.

    First file listed is for 64-bit operating systems.

    https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=22194&ProdId=2101&lang=eng&OSVersion... =

    Use the Drive Options - Advanced method to install and then select the option load a driver.

    If you check the box, only the compatible SATA driver is selected.

    See if it works.

  • My computer is connected to the Windows 2008 R2 server and some of the users on this computer receive their network drive mapped on group policy and some do not.

    My computer is connected to the Windows 2008 R2 server and some of the users on this computer receive their network drive mapped on group policy and some do not.  I find nothing in Event Viewer that shows that there is a problem.  Please let me know what to do to get the disks appears

    Original title: Network Networking file sharing file sharing file sharing file sharing discovery sharing Fileshare share shared

    Hi,

    The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

    TechNet Forum

    http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

     

    Hope this information helps.

  • I have lot to save my adobe photoshop cs6, when I try it starts to load then stops and gives me the message "the activation system is not available at this time." What should I do if I continue to use my photoshop?

    can you help me register my creative suite premium adobe cs6?

    I have lot to save my adobe photoshop cs6, when I try it starts to load then stops and gives me the message "the activation system is not available at this time." What should I do if I continue to use my photoshop?

    Check your hosts file.

    help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  • Pavilion dv7: Windows Setup could not configure?

    Hi guys,.

    while trying to re install Windows 7 on my laptop recently cleared after the installation an error appeared with "installation of windows could not configure windows to run on a hardware on this computer" If someone could help that would be great

    See you soon

    You are the very welcome.

  • Error messages: specified module could not be found for c:\windows\system32\tuvujuka.dll and c:\PROGRA-1\MYWEBS-1\bar\4.bin\M3PLUGIN. DLL

    I get two error messages when windows is loaded.  Specified module could not be found for c:\windows\system32\tuvujuka.dll and c:\PROGRA-1\MYWEBS-1\bar\4.bin\M3PLUGIN. DLL
    How can I fix?

    Hello

    • When you receive this error message?
    • What were the changes made before the issue started?

    I suggest you make a system full scan just to be sure.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  • TouchSmart 600: windows Setup could not configure windows to run on a hardware on this computer

    I had a Touchsmart 600-1120 Windows 7, don't know if it's 32-bit or 64-bit. I had to replace the hard drive and I bought a Seagate st2000dx001-1ns164 model. After installing the new drive, I used the recovery disks, but when the pc reboots I get the following message: "windows could not setup configure windows to run on a hardware on this computer."  Are there new drivers I need to install and if so, where can I find the?

    Thank you.

    I suspect that the reason for the 2 TB drive vs the 750 GB drive that was there.  All of the recovery check the hardware on the PC which is used and rejects the hardware changes if it differs too.  I don't know a way around this limitation.  I suspect that a copy of Windows 7 retail install OK but then you have all the drivers, FOUND HERE.

    Another way would be to get a new 750 GB drive to replace the original failed drive.

  • Windows could not set up to run on the hardware on this computer.

    After getting a new hardrive, I used the recovery disks. Once the three discs are finished, it goes to "Please wait while Windows continues to set up your computer" then a few minutes later it rises, "Windows is unable to complete the installation. To install windows on this computer, run the Setup again. Is there a way to correct this error without lose more money?

    Hello:

    Try to make your own Vista installation disc and see if you can get Vista installed in this way.

    If you are in a fault light but rewarding, you can make your own Vista installation DVD so you can read your Vista on the PC 25-character product key.

    You just download the 3 files you need on the link below and read all the instructions to create a Setup bootable DVD disk using imageburn.

    Do not take into account the part of the text in the first screen shot about "extract the files in the folder of Vista."

    The files were extracted already in this folder when you ran the X14.exe file by reading the text on top of the first screenshot.

    The other thing I noticed is on the 4th page, where it shows Developer ID Microsoft Corporation. I had to type Microsoft Corporation in me, and then other codes already filled in.

    When I went to compile the ISO file, ImageBurn gave a message on a WIM file, file and ISO, and if I wanted to burn it in a different format.

    I selected no, make the ISO file.

    It was not so hard to do. I burned both the disk of 64-bit and 32-bit disk in case I ever need them.

    I tested both of them one my hp dc7100 CMT desktop PC, worked flawlessly.

    When you enter the product key, he knows which version of Vista you have.

    http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/3317.2-3-Microsoft-Windows-v...

    After you install Vista successfully, you can then install the drivers for your PC and driver page support.

    Paul

  • Help to replace hard drives, when I tried to reinstall windows 7 Ultimate I get message that "Windows Setup could not configure Windows to run on a hardware on this computer.

    Nick Cannon

    If the installation fails again, it may be a hardware incompatibility problem. Go to the Windows 7 Upgrade Advisor on the Microsoft website to see if your computer can run Windows 7.

    If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

Maybe you are looking for

  • 5 ghz not listed is not on the Airport Express

    My 2.4 Ghz network is fine and my 5 GHz appears on some devices. It does not appear on my Smart TV and my TV from fire.  Both devices have seen my old 5 Ghz router. I'll put something wrong?

  • extraction of lines

    Hi guys I was learning on the tables and came across a tutorial exercises on ni.com. I am equipped with a 2D array and must be able to retrieve any table of line or a given column of her. Now the simple would be to use array index, however, I tried t

  • find the nr series of one computer, that a particular hard disk is too

    Hi all I was wondering if there is a solution to the following problem:I'm HIM offer support for a company using Lenovo Thinkpad T410-T420 and T430. We have many systems used in stock with a password for the user in this regard. I have Unfortunately,

  • Laptop won't start

    I fell asleep last night with a running program and the laptop went to Hibernate.   I can't start up.   Unable to get anything else than a black screen.   Tried out of the battery and the power supply and restart, but which did not work.   I am runni

  • You try to run Windows auto security updates, error message 0 x 80070424

    When I try to update my Windows security he invites me to ensure that the "automatic updates" is enabled.  It is and when I keep trying to update, I get an error message 0 x 80070424. Cannot find a solution anywhere.