Windows 7 cannot print - "Windows cannot print due to a problem with the installation of the current printer"
Window 7, Lexmark 1300 series. Cannot print. When you try to print from Notepad, the error message is "the system cannot find the file specified." What impression of the word is "Windows cannot print due to a problem with the installation of the current printer" have uninstalled and reinstalled all printers in many times. Removed the Lexmark 1300 in the registry and reinstalled. No change. Ran sfc/scannnow several times. Microsoft Fixit print detected no problems. Help, please.
Thread title: Epson TX235W will not print
When I click on 'print', I get the print control. the box that tells the printer how many copies, etc. When I toast 'print' it get a little box that says Windows cannot print due to a problem with the installation of the current printer. Try one of the following:
Check the printer by printing a Windows test page
Ensure that the printer is online and on
Reinstall the printer driver
I did everything above and I get the same result.
Did you of recent changes made to your computer that caused the problem?
This problem is limited to a particular application?
How is the printer connected?
Method 1) restart the print spooler service and delete the print queue
Start the print spooler service in the Services console
- Click Start and run, type services.msc, and then click OK.
- Right click on the print spooler service, and then click on stop.
- Right click on the print spooler service and then click Start.
Start the spooler service for printing at the command prompt
- Click Start, run, type cmd, and then click OK.
- Type the following commands at the command prompt:
net stop spooler
net start spooler
Note: Press ENTER after each command line.
Method 2) remove and add the printer and then check.
Add or remove a printer (Applicable for Windows 7)
It will be useful.
Hi, I'm trying to post a photo, but whenever I have try rotation to the right, it says something like: can't save changes to the image due to a problem with the properties of the file. My laptop is MS, but the photos were taken on the Iphone. How to do this?
I don't know if the following links answer your question, but
they may be worth a visit:
Good luck and * proceed at your own risk *.
FWIW... There is a very long discussion (several pages) to the
Cannot change the imported iPhone 4S photo
iPhone 4S image properties is not compartible with Windows?
Editing can be done on the computer due to the error
"Windows Photo Viewer cannot save changes to this picture.
because there is a problem with the properties of the image file".
We cannot turn a few photos in Windows 7 (but can turn others)
A simple solution is to open the photos in paint or most other
digital image editor and modify it.
Some people have reported success using the following free download
to remove the metadata.
Property restrictions stripper iphone 4S (JPEG & PNG Stripper)
Here's a way to turn...
Easily turn locked iPhone 4 and 4 s Photos in Windows 7 with
the rotator Lossless JPEG free
Free download JPEG Lossless rotating
Problem open attachments in Windows Live Mail "there was a problem with the service Windows Live Hotmail (a matter of temporary network conectivity has nothing to do with your computer)".
In the last few weeks Im facing a problem when I try to open an attachment on my Windows Live Mail Im getting the following message: "there was a problem with the Windows Live Hotmail service (a matter of temporary network conectivity has nothing to do with your computer). Please try again. »
Please let me know if I have a problem with my email account.
You will need to create a post on www.windowslivehelp.com for questions and assistance in connection with the Windows Live programs and services.
In addition, take note of the error message that you are referencing, "...". "a network temporary conectivity issue has nothing to do with your computer.
Original title: Windows Livecam
Hi my Skype can't my webcam micro and constantly sentds me a message saying "problem with recording device" How can I solve this problem?
He also says that my audio device is disabled in windows. I don't know what to do if someone could help that would be great :)
I had this problem too. This isn't a matter of Skype but there is a problem with the Audio driver on your system.
I used the following steps to detect the problem:
(a) I uninstalled the existing version of Skype
(b) installed the new version of Skype
(c) check if the problem still persists. Given that the problem still persisted.
(d) consulted the sound link in the Panel control, updated sound card driver software.
I try to install CS6 on my new laptop (windows 10) and I downloaded the installation from Adobe (MasterCollection_CS6_LS16 and a MasterCollection_CS6_LS16) files.
However when I click the .exe to start the installation, it keeps prompting me that she struggles with write rights and it cannot even unpack and install file... Help!
-In addition, only CURRENT products will be tested and updated for compatibility with Windows 10
- so if you have an older program, update you to Windows 10 at YOUR risk of problems
An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others
Do run as that administrator http://forums.adobe.com/thread/969395 [said again and also to Adobe all emissions] will be sometimes correct errors "odd" or "authorization" in Windows
Has anyone faced with the following question?
I use ESXi 5.0. I have several virtual machines run on the ESXi server. There is a virtual machine hung 2 times this month. I had to restart the vSphere Client Console.
I saw this strange event message in the event tab of ESXi host for this virtual machine:
Error stack: Click OK to restart the virtual machine or Cancel to turn off the virtual machine. An error has occurred causing a virtual CPU go into the stop State. If this anomaly had occurred outside of a virtual machine, it would have caused the physical machine restart. The stop State are accessible by properly configuring the virtual machine, a bug in the guest operating system or a problem in VMware ESX.
But only a VM on the ESXi host fails, the ESXi host. The link on the VMware KB States that applies to fail ESXi host.
That is why I said, «if you don't have a GROUP...» "I gave the article as a reference, because it happens to contain the corrective measures required for Intel BD132 erratum, regardless of the symptoms you are experiencing. For a complete list of symptoms, please note the following text of the Intel erratum, rather than the text of the article:
This erratum may result in unexpected errors, an incorrigible TLB error recorded in IA32_MCi_STATUS. MCACOD (bits [0:15]) with a value of 0000_0000_0001_xxxxb (where x is 0 or 1), an accident comments or hypervisor, or other unexpected behavior of the system.
If you have a PAE enabled in this guest (or any other guest Windows XP 32 - bit on this system), this problem could potentially be the result of this erratum. Then again, it might be something else entirely.
In any case if you are at risk of erratum Intel BD132, I suggest you to take the measures recommended in the above-mentioned article.
When I turn on my pc, there is a message ; there is no disc in the drive.
It's really annoying, and in addition, Cd driver can read nothing.
and to make things worse, it freezes often.
I want to reinstall the program; but I don't know what I have to do without cd.
Thank you for your help.
I suggest you to follow these steps and check if that helps:
Start the computer in safe mode and check if you get the same error message:
Try to perform the clean boot and check if it helps:
NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in the article above.
Check if that helps.
Just downloaded PES, but I cannot start a file like it says 'problem using Adobe Color Engine' if I can actually get PSE to go beyond this issue.
Uninstall (uninstaller is in the PSE 8 Applications folder), creating a new admin user in system preferences and run the installation from there. If you have any type of antivirus software, disable it during the installation. Repair permissions after installation.
I have a problem when using Google Maps, at a certain point my custards computer window and says there is a problem with the display drivers and he recovered, but it is not. Problem does not occur with Int Explorrer, so I don't think it's the computer
When using google maps via Firefox, after asking a place which is not the General section of North America who comes up regularly, the firefox screen becomes white with a narrow banner at the top. A message appears in the lower right corner that says something on display drivers having had a problem, but now have been recovered. However, the display is not recover and the message of the banner is that Firefox is not responding. When I go to restart Firefox if I'm about to restore, the page is still frozen.
I don't think there is a problem with my computer because it doesn't happen if I used to go to google maps, then G-cards works normally.
This phenomenon didn't happen before the last update Google or Firefox. I used Fiefox for some years and also Google Maps on previous computers and on this one and not had it before.
It is a relatively young computer (Asus EeSlate 121) less than a year. I have used Firefox since I bought it and until recently had no problem with Google Maps.
I solved it myself, after the 'note' that was FF/Mozilla, just as I finished my message, commenting on what it was that my system was, I wnnt back to check my plug-ins, etc. I downloaded the latest Java, the TWO 32-bit AND 64-bit versions and latest Firefox.
Now everything works.
After five years of good functioning sth went wrong. The system tries to boot but lack access to a device (HARD drive?). And then tries to download files to recover. After downloading the recovery fails and the only option is to shut down the computer. How can I recover this system?
Recovery process is very simply.
Did you create the recovery media (DVD)? If so you can use it for recovery image installation.
Otherwise, you can use HARD drive recovery option (F8 > to fix your computer) and start the recovery image installation.
Please test F8 option.
If you have any other questions you are welcome.
When we publish a Web site create in MUSE, the server must be linux? Please let me know because I have the problem with the form works... now the server that I use is the window...
I am trying to publish in my domain on windows server, but I have a problem with the form...
The server must be linux to work the form?
Thanks in advance for your help...
Thank you Brad... but how can I understand if a Linux server support? I try to do something in particular?
Vista Home Premium 64-bit
I sent myself a JPG file, taken by a camera in the email.
I backed up, & then tried to turn it using Windows Photo Gallery.
He says: 'cannot save this image due to a problem with the properties of the file.'.
Sometimes (once, so far), it then says 'Changes to the labels, legend, side, or date taken could not be saved in this file.'.
When I try the same thing in Windows Explorer, it says "you cannot rotate this image. The file may be used or open in another program or file or folder can be read-onlly. ».
Properties file shows the file read-only.
Unchecking that and apply or OK has no effect.
Ditto for the folder.
But looking around, I see that (sometimes (?)) other records are also marked read-only, but are not their files.
When I produce-> properties-> details-> ' properties delete and personal information "->" create a copy with all deleted properties ", he says: 'an error occurred when writing the property 'Altitude' in the file <....>.'.
I can't find another way to try to remove all the ((maybe) offend them) properties.
Thanks for the return of the response. Below, I have included a few steps to try. When you fill out these test in Windows Explorer and see if you can rotate the images.
1. click on the start menu.
2. click on computer.
3. right click on the drive that gives you trouble.
4. Select Properties.
5. click on the Security tab.
6. click on the Edit button where it says "to change permissions, click on change."
7. in the "group or user names", click on the user you want to change.
8. in the area 'Permissions for the users', click the checkbox to allow full control.
9. click on ok.
Please let us know status.
Original title: Media Player
I tried to play my music in media player and they will not play. The tab that appears says "Windows Media Player cannot play the file because there is a problem with the audio device. It might not be a sound device installed on your computer, it can be used by another program, or it may not work properly. Also, I can not play music in the window, that I downloaded everything. If anyone has an answer I would appreciate the help. Thank you
· What is the brand and model of the computer?
Follow the suggestions below for a possible solution:
Method 1: Quit other programs that may be using your sound device, and then try to play the file again.
Method 2: Install an updated driver.
Step 1: Firstly uninstall the audio from the device manager driver and Add / Remove Programs
a. click Startand then click Control Panel.
b. click Systemand click on the hardware tab, then click Device Manager.
c. to the title sound, video and games controller, check the sound card that is listed.
d. right click on the sound card, and then click Uninstall driver.
Step 2: To see if an updated driver is available, use Windows Update or access the sound device manufacturer's Web site.
Follow these steps to do the same thing:
a. click Startand then click Control Panel.
b. click Systemand click on the hardware tab, then click Device Manager.
c. the title sound, the video controller and games, make sure that the sound card is listed.
d. right click on the sound card and then click Update driver to install the latest version of the driver.
e. visit the sound card manufacturer's Web site to determine if a newer version of the driver is available for download.
Method 3: If you have multiple audio devices installed on your computer, try to use another. The selected audio device might not support Secure Audio Path (SAP).
You can see the following article for more information:
Resolution of the problems of reading in the Windows Media Player for Windows XP
Let us know if that helps.
Original title: unable to play any DVD
"Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD player and the video card protection decoder. Try to install a driver available for your video card.
I tried to update all the drivers but the problem persists
1. have you made any hardware changes or software on the computer before this problem?
2. what version of windows Media Player do you use?
You can follow this link & check if the problem persists.
Hope the helps of information.
Please post back and we do know.
Maybe you are looking for
Hi all I have recently been given the above laptop it has a keyboard very worn with a few missing keys etc... Having bought a replacement keyboard I got it replaced, and it seems to work ok except for a few problems. Close keys don't seem to work or
Hello I intend to develop a labview program that is analysis drawn from all the module present PXI chassis (such as calibration, description of the add-on dates, etc...). Need some advice which VI Labview is capable of scanning over the disclosures i
Windows cannot find C:\WINDOWS\system32\rundll32.exe This show upward in a box gray, whenever I go to control panel > add or remove programs. It also appears when I right-click on the screen with the desktop icons. He appears in the gray area after I
Just bought my XZ and the fast charger UCH12 today, it took more than three hours, is responsible for 39% in full. What is wrong with him? Really quick takes XZ which 3.0?
Hello I am trying to use the features of the camera BB10 for playbook (camera_api.h). The problem is that when I build, I get an undefined reference for example error "undefined reference to"camera_open '" The functionalitly to the camera is activate