Windows 7 - CAPI2 and root certificates auto update (error 4107)

Similar Questions

• Windows Vista sp2 and Installer cannot install updates error 80070641 code

  original title; Windows Vista sp2 installer problem

  Hello.  I'm running vista 64 bit sp2 and I seem to have a registry error with windows install.  Whenever I try to install/uninstall a program, I get the error message

  "The application failed to start because msi.dll not found. Reinstalling the application may fix this problem. »
  Maybe related, but when I try to run any windows program (examples are programs office, expressions) I get the error message
  "the specified module is not found.
  Also, I can't do windows updates.  For the latter, I get:
  error code 80070641
  Any help is greatly appreciated.  Unfortunately I do not have the original installation disks for vista, or all the backup files.

  Hi Maxjh25,

  It seems to be that some of the files windows install is corrupt.

  I have some steps that may help you:

  Method 1: Make sure that the Windows Installer service is running.

  a. click Startand type services.msc , and then press enter.

  (b) in the services window, locate Windows Installer service in the services list.

  c. check that the status is started. If the condition column is empty, right-click Windows Installer, and then select start.

  d. If you get error trying to force start the Windows Installer service, try to change the Startup Type to Automatic (default is Manual), then

  e. restart the computer.

  f. If all goes although you should, after the analysis, see the following message "theWindows resource protection did not find any breach of integrity".

  g. once the scan is finished, close the command prompt window, restart the computer and check.

  For more information, see the link below:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212

   

  Method 2:

  a. try to uninstall Windows install using the Windows Installer Cleanup utility:

  Description of the Windows Installer Cleanup utility

  http://support.Microsoft.com/kb/290301

  b. restart the computer.

  c. download and install the latest version of Windows Installer by downloading from the link given below:

  Windows install 4.5 Redistributable

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  d. try to install the program.

  Hope the helps of information. Please post back and we do know.

• Microsoft Windows CAPI2 failed extract list third root of auto update cab

  Hi, I have this error in the past few weeks and I'm not sure if I have to do something. I went to TechNet, event ID 11 root certificates Update Automatic Configuration, but I need something more simple I can follow. Confuseduser P.S. Exact error message is below in: -.
  Log name: Application
  Source: Microsoft-Windows-CAPI2
  Date: 2009-05-27 20:42:16
  Event ID: 11
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Helga-PC
  Description:
  Has not taken from the root list third-party auto update cab at: http://www.download.windowsupdate.com/msdownload/update/v3/static/trustedr/en/authrootstl.cab> with error: a required certificate is not in its validity period when verifying against the current system clock or the timestamp in the signed file.
  .
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      11
      0
      2
      0
      0
      0 x 80000000000000
     
      32381
     
     
      Application
      Helga-PC
     
   
   
      http://www.download.windowsupdate.com/msdownload/update/v3/static/trustedr/en/authrootstl.cab
      A required certificate is not in its validity period when verifying against the current system clock or the timestamp in the signed file.
  
   
  

  This is not enough.

  Now that you have done this outside, I saw the same behavior in the CAPI2 log file event viewer. My Windows 7 clients have attempted to access both URLS in the field of http://crl.microsoft.com/

  None of the posts that I had seen on this had referred to the need for this path.

  Thank you

  Michael

  Hello

  Here is a definition of basis for the CSF in general terms. You can search Google using "Certificate Revocation List" and find a lot more information.

  It is also possible that direct X is looking for some updated drivers

  What is happening is that your browser is verification of certificates caused, is perfectly normal and safe, its to protect you

  Good day

  PS for some additional info

  http://TechNet.Microsoft.com/en-us/library/dd772269.aspx Scan with OneCare + 50 tips Windows 7even + tormented by the center of privacy? DELETE this Blog search & response threat Sysinternals Live Tools + TRANSLATOR+ Photosynth + Microsoft Security + Microsoft SUPPORT + Of Live Labs PIVOT + Microsoft Live Labs + Office 2010 beta + get Windows LIVE!

• Update of root certificate does not (error CAPI2 event ID 60)

  Hello

  I recently did a clean install of Windows 7 SP1 on a new system.
  I noticed that there are sites including https / SSL certificates do not seem valid where I don't expect it (for example BBC laboratories), using the two Chrome and IE.
  After some searching on the forum of other messages, I followed it down to a problem with Windows 7, do not automatically update root certificates installed. Specifically, using MMC event logging, CAPI2 event ID 60 (store) returns 5 "access denied." This causes then event ID 11 and 30 to not like the certificate chain fails to build and check.
  Other points to note:
  • Normal Windows updates work fine
  • Most of the sites using https / SSL works fine (i.e. a root certificates are installed with success - if those provided with Windows or have been updated since the installation I don't know)
  • I tried to disable all my firewall / antivirus programs where they prevented updates, no effect
  Anyone know a fix for this - I don't really want to having to perform a complete reinstallation :(
  Thank you!

  Thanks sirot,.

  Unfortunately, this does not work.
  In the end I just did a re-complete installation of Windows which seems to have solved the problem.

• Windows Vista Auto Update error 8024 has 000

  I have a Toshiba A305 - S6872 Windows Vista 32-bit SP1 I had to install a new Western Digital HARD drive, I have loaded the cd of windows vista Toshiba gave with the laptop, when I go to Windows Update I get the code A 8024, 000, I tried all of the solutions in the pop-ups for the code under cmd, I tried the fix it is but a Shell of power error , I also installed Microsoft Update Standalone Package (.msu) I get the 0xc800247 error code, I tried to make each step under the toshiba web site say it's the Intel Rapid Storage driver, I downloaded the update they had on the Toshiba site and still no luck, someone on Fixya said to download Sp2 on a disk and try this way a different error code. I can't get any help on why windows update will not work all I get is error code after the error code. I never had problems in the past. I just tried the cmd together all the steps listed and does still no update. The codes will tell you to go to intel, then intel tell you to go to Toshiba toshiba said its microsoft? IM so confused. Thank you

  Hello

  You can try the steps proposed by Marilyn - Support Engineer.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-windows_update/Windows-Update-error-code-8024a000/562845f3-78d5-42A0-bed5-e3fd39f01df7

  (Also applies to Windows Vista)

  In addition, refer to the section posted on Thursday, August 11, 2011 18:38 from this link:

  https://social.technet.Microsoft.com/forums/Windows/en-us/45c67633-0df1-483B-b387-2f4d980ff08c/Vista-update-error-8024a000?Forum=itprovistadesktopui

  I hope this helps.

• Windows Vista could not search for new updates (error code 1 800700)

  original title: Windows Vista could not search for new updates

  Windows Vista could not search for new updates.
  800700 1 error code.
  My Antivirus software is Bitdefender.
  What should I do?

  How long it has been since the system enabled to update?

  Which version of Windows Vista (32-bit or 64-bit) and service pack (1 or 2) level.

  When the system has been changed swept with the suite of security/antivirus installed, no matter what has been detected? If so, what, please?

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

• MS auto update - errors for important updates

  Error on Windows update - running VISTA 32

  Error code is 64 c, also getting error code 643

  Two updates that do not work are the following:

  Update for Microsoft Silverlight (KB2495644)

  Download size: 6.0 MB

  Update type: Important

  This update of Silverlight improves the performance of startup, accessibility features, reliability, security, improves the support of business and includes several fixes to better manage the rich internet applications. This update is compatible with web applications created by using earlier versions of Silverlight.

  More information:
  http://go.Microsoft.com/fwlink/?LinkId=208901

  Help and Support:
  http://go.Microsoft.com/fwlink/?LinkId=105787

  Bing 7.0 bar (KB2505591)

  Download size: 3.5 MB

  Update type: Important

  Bing Bar 7.0 (formerly mark MSN Toolbar) is an Internet Explorer toolbar. This upgrade of the Bing toolbar offers new Bing search features, improves performance and stability.

  More information:
  http://toolbar.MSN.com/

  Help and Support:
  http://support.Microsoft.com/kb/2505591

  Hello

  Method 1:

  You can try to reset the Windows Update components and then try to install the updates and check what is happening. You must follow the link provided below to run the fixit which will automatically fix the problem if you find problems with the fixit, then you can follow the procedure to manually reset Windows component update.

  How to reset the Windows Update components?

  http://support.Microsoft.com/default.aspx/KB/971058

  Method 2:

  Follow the instructions in the link below to rename software c:\windows\system32\catroot and distribution records and try to install the service pack.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Hope that information was useful

• Am unable to download/updaate cab on windows 8.1 and CS6.  Get the error "Application feeder damaged."  Downloaded new application manager, same result.  How to proceed?

  Have just upgraded to the new computer running windows 8.1 and downloaded CS6.  Unable to download the raw files of Nikon D800, but may update the raw files from Canon G10.  When I try to upgrade to ACR, I get the error message "Application Manager" damaged, download new application manager with the same result.  CS6 came with ACR 7.0.0.308, which seems like it should treat the D800 raw files.  How should I proceed?

  update by downloading the files directly and then apply them:

  pre cc updates: http://www.adobe.com/downloads/updates/

  CC updates: http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html

  updates CC 2104: http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html

• I keep re install windows live messenger and it always gives me error messages

  I have followed the steps to a clean a few times install, but still can not connect to live messenger. I get the error code 80040154 and error code 81000490.

  The file does not appear in my programs longer, but it is still on my system. I tried to delete it by cmd, but I don't have to be admin! who I am. Please give me more detailed suggestions.

  Thank you

  Hello

  The question you have posted is related to Windows Live product, and would be better suited in the Windows Live. Please visit the link below to find a community that will provide the best support.

  http://windowslivehelp.com/product.aspx?ProductID=2

• Windows 7 programs and features shows no updates installed...

  My cousin's computer will not show installed updates.  There was a program called SuperOptimizer (malware) installed and I got rid of that and another program incorrect.  I need to see the updates installed, so that I can get rid of the notification of Windows annoying 10.  How the updates installed to reappear?

  The system was scanned and cleaned by Malwarebytes, Bitdefender (I got rid of Microsoft Security Essentials) and the Microsoft Malicious Software Removal Tool.  There must be a way of making appear back without reloading Windows. If anyone has any ideas, your contribution is greatly appreciated.  Thanks in advance.

  P.S. The operating system is Windows 7 Professional 64 bit.

  Select Start, all programs, accessories, right-click right-click command promptand click run as administrator on the menu drop-down... Type cd\ and press ENTER. Type "sfc/scannow damaged = c: \ /OFFWINDIR = c:\windows" without the quotes and press ENTER . When he completed type exit, press ENTER and restart the computer.

  The link to Dropbox doesn't give me access to new files.

• 8.1 Windows 64-bit and USB 3.0 connection error

  What a nightmare for me after I bought my G2 470 Probook with little window 8.1 64 and USB 3.0.  After my installation to my new laptop, there are 2 questions, I am facing now:

  1. my external USB 3.0 drive may work correctly with my old laptop window 7 with USB 3.0 input. However, my exernal USB 3.0 drive cannot work proplery when I try to connect it to my new laptop with little window 8.1 64. It shows me he cut sometimes, sometimes connect often and I can't remove the drive safely

  2. once the laptop set in place, there are 3 partition of HP, which is Windows (c, recovery (D and HP tools (E. I want to allocate more space fo save my old photo, HP technician told me to compress and release (about 150 GB) space on my C:.))) Can I use the new disk successfully. However it seems that I can't have the window manually updated, so I'm concerned if this is the point of mian to create this problem.

  HP technicians can help here?

  N ° there is no need to go to a command line and it is not all the DOS commands that will help.

  Consider using the Windows system restore to return the operating system of your laptop to a date before the start of this issue. Choose a restore point dated before the redone problem surface. Use the charm of the search and the type of restore. Select create a restore point. The System Properties window appears. Click System Restore, as shown in the following image.

  

  

  Make sure that the option to Show me the restore points more has a check mark in the box. Choose the restore point that you want, and then click Next. It is safe and reversible.

  

• Im trying to find my windows oc disk and I keep getting an error shell excute ex failed; Code 87 the parameter is incorrect how can I solve this problem

  Im trying to get my disk of oc windows, and I get an error shell excute ex failed; Code 87 the parameter is incorrect. Please help me

  How can I solve this problem. Thank you.

  Hello

  You did it changes on the computer before the problem started?

  I suggest you perform a startup repair.

  See these articles for help:
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem

• Upgrade to Windows 7 Ultimate and highway 2010 receives the error: "your registry settings for this application no were not copied correctly."

  I updated from XP Pro to Win7 Ultimate.

  When I try to install Highway 2010 (that I had before) I get the following message

  "Your registry settings for this application were not copied correctly. To correct these settings, run the installation of this application from the location where you originally installed it. »

  I tried the suggestions without success. So what do I do to fix this?

  I have found since that when I uninstall several files are missing, 41ce1.rbf & 41d81.rbf are later. It seems that highway will not properly work without their files (I guess here).

  So where they are or how can I get the.

  I get the same problems when I try to install Highway 2011 test, I don't buy the full program so the custom of trial run.

  Chris Townsend

  Now, I know the .rbf files are files of Roll-back.

  Hello Lrchr,

  Your question would be better addressed in the highway, streets and trips and MapPoint.
  Click here for a link to repost in the forum of the highway. They will be better able to solve your problem here.

  I hope this helps.

  Marilyn

• Windows Update error code: 0 x 80240036, the site has encountered a problem and cannot display the page you want to view.

  Original title:

  tried error0x80240036 the update from microsoft. bed then the website met problem can not display the page to display

  tried to update windows without success and went to microsoft update it scanc windows and comes back with the error 0 x 80240036, said the website has encountered a problem and cannot display the page I want to see

  Hello

  1. What service pack is installed on the computer?
  2. You did changes to the computer before the show?
  3. The problem occurs with a particular update?
  4. What anti-virus software is installed on the computer?

  You can try the methods and check:

  Method 1:

  You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update

  http://support.Microsoft.com/kb/883614

  Method 2:

  You can run the fixit from following link and check:

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update

  Let us know if it helps!

• Crashing on start, auto-updated even when disabled & not allowing an add-on security toolbar download

  I followed all the steps in all relevant help articles (http://support.mozilla.org/en-US/kb/firefox-crashes-troubleshoot-prevent-and-get-help#w_get-help-fixing-this-crash), and nothing has solved this problem.

  I was running v17, and yesterday it auto-updated to v18 when I opened firefox. As soon as it updated it crashed, pressing 'restart firefox' did nothing, I could only quit. So I found an old install file, went back to v17, checked the option to ask permission before updating, run malwarebytes and spybot, so my PC is clean. This morning, same thing happened - auto update with no warning or permission given. Crashed. Repeatedly, restarted, closed everything else that was running, uninstalled and reinstalled the older stable version. Both times I spent a long time reinstalling add ons and themes. On top of that my goodapp toolbar from goodsearch will no longer be installed by firefox because 'it can't modify the necessary files'. All other add ons work fine, and I was using this toolbar with no issues in v17 only yesterday.
  The second reinstall I clicked the option 'never check for updates'. But tonight, when I opened firefox, it updated without warning to v18 again and I was ready to switch to chrome after a decade of using this browser. There was no Firefox (safe mode) to run from my program files, and since I couldn't open the browser at all before it crashed, all I could do was uninstall and reinstall v17 for the third time in 24 hours and as you can imagine I am not very happy that your so-called stable release is anything but that. I think with the number of people having problems that you should stop work on v20 and actually accept there is a problem with this release instead of trying to blame it on malware.
  

  Final crash report ID: bp-3ea35888-008f-4e21-b31f-023002130112

  This crash is usually caused by malicious software and the random name involved in your case file is astktkra.dll as you can see in the list of the modules of the accident report.

  Try using MSConfig and disable this file to prevent any start-up.

  • http://www.howtogeek.com/74523/how-to-disable-startup-programs-in-Windows/

  Try to start the computer in safe mode Windows with network support (on the startup screen, press F8) to see if that allows you to locate and remove the file manually or with a malware scanner.

  You need to search the registry of Windows (Ctrl + F) for references to this file and export and delete the keys involved to avoid problems starting with the missing files or you can also use a registry cleaner like CCleaner.
  If you are not satisfied with editing the registry, then it's better to skip this step.

  Do a check with some malware malware, analysis of programs on the Windows computer.
  
  You need to scan with all programs, because each program detects a different malicious program.
  
  Make sure that you update each program to get the latest version of their databases before scanning.

  • http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
  • http://www.superantispyware.com/ - SuperAntispyware
  • http://www.microsoft.com/security/scanner/en-us/default.aspx - scan Microsoft Security
  • http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
  • http://www.safer-networking.org/en/index.html - Spybot Search & Destroy

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • http://support.Kaspersky.com/viruses/solutions?QID=208280684

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked