Windows 7 deskjet 5652 on network

Similar Questions

• DeskJet 5652 under Windows 7 - scalling useless when using autoduplexer

  Hello

  I am very disappointed about Windows 7 drivers for DeskJet 5652 printer. Drivers have some bugs:

  When I printed the document on both sides of the paper (with automatic duplex unit) printer do some page scalling (it increases the margins at the top and bottom of the page) - impression seems strange because all that the page is a bit shorter, also fonts like Times New Roman, Arial, etc looks like... strange, different because of this unnecessary scalling. It only happens when I use the auto duplexer.

  I tried to fix it myself. I tried to change the print processor in the settings of the printer of hpzppwn7 to winprint and got partial success - printer doesn't no matter what scalling (using the duplexer) but something else does not-number of copies. When I change the number of copies from 1 to i. e. 3 in the windows printer window and also in the advanced drivers tab - it does not print only one copy. This parameter is ignored in winprint.

  Please fix these problems, because this printer is useless in Windows 7... It is very unfortunate, it is not that old!

  You plan out an another Windows 7 drivers for this printer? Maybe some fix?

  Greetings and thanks for your help!

  Peter

  Message edited by espero2 on 11/21/2009 02:32

  espero2 wrote:

  There is a text file: hpf4bk3l.gpd

  Inside there are some channels such as:

  * Cmd: = PCL_A4 (sheet A4 paper)
  }
         
  * switch: HPReportSymmetricMargins
  {
  * case: false
  {
  * switch: Orientation
  {
  * case: PORTRAIT
  {
  * PrintableArea: PAIR (9624, 13269)
  * PrintableOrigin: PAIR (150, 83)
  * CursorOrigin: PAIR (150, 83)

  Can you explain these three parameters: PrintableArea, PrintableOrigin, and CursorOrigin? What do these numbers mean?

  I think that the solution to my problem is in these numbers...

  What do you think?

  You have the possibility to compare these numbers with HP Windows XP drivers?

  I don't have access to the Windows XP driver settings, they are not as "readable" as Vista or Windows 7 gpd files.  The above figures are the page dimensions in units of 1/1200 ".  The top left of the page is (0,0).  In the example above the beginning of the printable area is 150 (83) or 0.125 "from left edge and 0.07" down from the top.  The lower edge of the printable area is the printable origin as well as the printable area.  "This ends (13269 + 83) / 1200 or 11,13", leaving a margin of 0.57 down "on A4 size paper.  Sounds a bit heavy, I think 0.46 "the bottom margin would be satisfactory.

  The printible origin is the upper-left corner of the area to print in portrait mode, it would be the top right of the page if printing landscape.

  If you want to "tweak" the DPG file I suggest to take a glance at the instructions to install the patch Vista Duplex printing here. Basically, you want to make a copy of the DPG file and make the necessary changes.  Then you will need to open an administrative command prompt, rename the original gpd file for backup and a copy of the new file.  You will need to stop the spooler, delete all the hp*.bud files, then restart the spooler.  This will cause the DPG file to read and bud files to regenerate.  The number you want to change would be the second number in the pair of the printable area.  You might try to increase the number of courses that move the margin from the bottom to the low 0.09 ", leaving a margin of 0.46 108 lower."  You can also experiment with other numbers, but at some point, you will hit the physical limit of the size of the paper.

• W7 driver for deskjet 5652 with auto duplxer

  Hello

  Our PC have been updated with W7, and the driver generic does not reconise that the printer, a Deskjet 5652 has a duplexer car attached. I installed the drivers from the disc that came with the machine, and while the printer properties now allow you to select two-sided printing, the printer does not really work the task. As a work of art on documents, whether a shape or clipart images do not print the document. How can I get the required software / driver that solves these problems? It's crazy to expect customers to empty a perfectly good printer to buy a compatible new!

  Thanks in advance.

  Hello

  First of all, be sure to unplug the printer and uninstall all incompatible software installed from the disk provided with the machine.

  You can remove the software installed via Control Panel > programs and features > uninstall a program and then restart your PC.

  Enter the control panel > devices and printers.

  Click Add a printer.

  Select a local printer.

  Leave the default selection and click Next.

  Under the list of printers, click Windows Update .

  Allow several minutes (it may take some time) until the Printers list if poster again, then put an end to the addition of a window of the printer.

  Plug in the printer and wait until the device appears under printers.

  Right-click the printer icon, and then click printer properties.
  Click the device settings tab.
  In Duplex Automatic Two-Sided accessory installed and click OK to save the change.

  Automatic duplex printing should now available.

  Please let me know of any problems,
  Shlomi

• need to run windows in safe mode with network to have browserws working properly. using IE and Firefox. Website of punch comes in properly next tab sites just wai

  need to run windows in safe mode with network to have browserws working properly. using IE and Firefox. Web site fisting comes in following correctly sites just waiting for the website tab help

  If it works in Windows safe mode, then you have a problem with other software, maybe a security software or a system driver that runs on your computer.

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • https://support.Mozilla.org/KB/fix-problems-connecting-websites-after-updating

• Windows cannot find any additional network?

  I am currently using my laptop that can connect to my home network but my PC can't. My PC can't find no additional network. It says it is connected to the network called 'Network', but I can't use my internetor all programs using the internet. It says "windows cannot find any additional network." I clicked on "Diagnose why windows cannot find any additional network", it told me to update my drivers and my drivers he's was updated. Can someone help me?

  Hello

  You can check the link below and try the advice given and check if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/Windows-cannot-find-any-additional-networks-an/ca9f086b-42A5-46E5-b894-92c009f8eba8

  Hope that information was useful

• "Use Windows to configure my wireless network. is missing

  Hello:

  There is NO connection of Belkin Wireless adapter flashes to pick up the signal.

  Whenever there is no link, I need click Belkins utility in the system tray at the bottom to obtain, however, it keeps not connected and takes only 10-20 minutes.

  Moreover, I found when I clicked, Belkin icon > properties > network and found there is no "use Windows to configure my wireless network.

  How do I fix this problem?

  Thank you for your help in advance.

  Hello

  I suggest to follow the steps in the below links and let them know the State of the question.

  Wireless and wired network problems:

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  To set up automatic wireless network configuration:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/wlan_client_configure.mspx?mfr=true

  For more information:

  Follow the steps in the link to configure the adapter Belkin Wireless below:

  http://www.Belkin.com/support/DL/p75451_f5d8053.PDF

  If the problem persists, then I suggest you to contact the Belkin Support:

  http://www.Belkin.com/us/support

  I hope that the information above helps you.

  
  

• Dell has developed a passwoord and cannot access the Windows XP system on a network share in Windows 7.

  Original title: network router, XP computer and Windows 7 laptop computer dilemma.

  My system XP computer is part of a network using a router. I also have a laptop Windows 7, using the same network. Reference Dell set up a password so that the network is not accessible without password, reducing the risk of piracy. Now, I can not in the XP system because of the defined password.  How to reset or enter the password on the XP computer?

  Hi Scottid2,

  1. do you receive error messages when you access the Windows XP system?

  2. What is the password being set by Dell?

  You can check in the Windows 7 system if the password protected sharing is enabled. When protected by password sharing is enabled, people using other computers on your network cannot access your shared folders or printers unless they have a user account on your computer.

  You can turn off password protected sharing and check if it helps.

  For more information, see the articles:

  Why can't I connect to other computers?

  Networking of computers running different versions of Windows

  As the password is set by Dell, you can also consult with support of Dell for the same thing:

  Dell support

• Unable to connect to the Internet error "Windows does not detect a network card installed properly"

  Internet does not connect and connection was well 5 hours ago. Message states: "Windows did not detect a network card installed properly" How should I proceed? Connection is on the laptop, but also other devices. Problem is only with the office.

  Any help is appreciated

  OT: Internet connection

  Hello

  You did changes to the computer before the show?

  I suggest you try the steps from the following link:

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Issues with Dell desktop computer wireless and D-Link wireless network card. Only able to get wireless access by checking "Use Windows to configure my wireless network". This kind of file sharing impossible.

  original title: can't see the computer on wireless internet!

  I hope that's not too much detail, but I would like that the sequence of events to be clear...

  I have a Dell desktop computer that's probably six or seven years now.  It did not come with a wireless card, so I bought a DLink router and combo card wireless, install both with the DLink software.  It works beautifully.

  Later, we through my rep AT & T DSL, I got a Motorola modem/router with wireless capabilities.  I had plugged directly on my computer Dell desktop and moved to a Dell laptop DLink wireless receiver.  No problems.

  The Dell laptop is dead and the DLink receiver has not been used for a long time.  Family of my daughter moved to our place, and I have connected his desktop computers and laptop to wireless internet, using the Windows Connection Wizard.  Still no problem.

  I got a new ASUS laptop, I also linked using the Windows Wizard.  STILL no problem.

  Now, here's the problem comes.  I moved the Dell desktop computer, connected the DLink wireless receiver to it and I am able to get wireless access ONLY when I go into the properties of PC, click the wireless networks tab and check the "use Windows to configure my wireless network" box.  Then I can connect correctly, but I don't see this computer on my wireless network.  Bad luck... because I want to be able to access share files.  When I try to connect using different assistants of Windows, I get a message to the effect that, if I used another software to connect to the program, I can't use the Windows Wizard.

  So, what can I do to remove the original configuration of DLink completely and to connect to my wireless network using the wizards in Windows?  I uninstalled the software of DLink, but it seems to have no effect at all.

  BTW, Dell desktop computer is running XP, office computer of my daughter is running VISTA, and two laptops are equipped with Windows 7.  I can see all the computers on the network with the exception of the original Dell desktop computer wireless.

  Any help would be appreciated!

  Hi Joe and DonnaLoth,

  The network will have to be changed to allow the computer Windows XP join a workgroup.

  How to change a computer name, join a domain, and add a computer description in Windows XP or Windows Server 2003

  You can also read the following article.

  Networking of computers running different versions of Windows

• Windows cannot find any additional network / an unexpected error has occurred

  I got this new PC Windows Vista Home Edition x 64 SP2 and I need to connect it to the network wireless in my house because that the router Netgear DG834GT wireless broadband is not very conveniently placed for wired connectivity. I have a Netgear WG111T USB wireless adapter which works fine on my other PC / laptop (XP & Vista, both 32-bit), but I can't make it work on my Vista x 64 PC.

  I have installed the version of the driver 2.1.0.26 x 64-compatible for the WG111T and the device works correctly, according to Device Manager.

  When I try to 'connect', I get 'Windows cannot find any additional network . " While the other PC at home can pick up 3 wireless networks.

  Go until the network & sharing Center, then manage the networks without wire, then Add, then manually create a network profile, I get "unexpected error ."

  I spoke to Netgear who insist the player WG111T is compatible with the x 64 visits.

  I talked to my PC provider who suggested to try the adapter on another PC Vista x 64 to see if it works there. Problem is, I don't know anyone else with a Vista x 64 PC.

  I would be extremely grateful if someone can help me before on this one. Thanks in advance for all advice.

  See you soon,.

  Arty-W

  It seems that the problem was caused by ZoneAlarm Internet Security Suite hinder and prevent the correct installation of the Netgear wireless driver. My problem has been cured by following the advice of daouda wire - see http://social.answers.microsoft.com/Forums/en-US/vistanetworking/thread/58716eca-80cb-4555-a1f4-bd4e5350aeb4

• Windows Vista cannot find any networks - please help!

  On my laptop Windows Vista comes preinstalled and can have no problem finding networks.

  I also have Ubuntu on my laptop and it is detects networks easily.

  I was told it might be the driver... However, I don't know where to find the latest drivers for Vista.

  Nobody knows exactly where to find them? I am eager to find a simple solution if it is not the drivers.

  I appreciate any help you can give me. There is no sense to me why he does not find networks, including in my house. Thank you!

  Hello

  1. How do you know that the problem is related to the drivers?

  2. you remember to make changes before the hardware or software issue?

  3. What is the brand and model of your system?

  Method 1:

  You can read the following article and try to run the troubleshooter.

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  We can also refer to the computer or the device manufacturer's Web site and try to install the latest version of the drivers.

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

• Windows Vista detects the wireless network but will not connect to it. Two other users in the same office connect without difficulty.

  The title says it all really.

  I was connected and working normally for about an hour this morning, until suddenly the connection has been lost.
  Windows detects the wireless network but will not connect. Two other users in the same office connect without difficulty.
  Help, please.
  Thank you.
  original title: vista detection network but will not connect

  Hi JulianBeach,

  1. you have made no changes to the computer before the broadcast took place?
  2. What is the exact error message you get?
  3 is connected to the domain of the computer?
  4. what happens when you try to connect to the network?

  Try the steps from the following link:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Additional information:
  Wireless network card: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

• Windows Vista is not mapped network drives on a network server

  I set up a home network server which I can access and map drives on a Windows7 and Windows XP computer on the network.  However, I can't do it from my Windows Vista computer.   The vista PC can find and configure the server through its IP address, but it does not appear on the topic of network and sharing.  The network is set to private, all parameters are checked to allow sharing and access and the server is on the same workgroup.  Any ideas on what prevents Windows Vista map server readers?

  http://social.Microsoft.com/forums/en-us/category/WindowsHomeServer/

  They will help you in the above Windows Home Server Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Vista cannot find any networks after reformat

  Windows Vista cannot find any networks after reformatting. Help!

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• WINDOWS CANNOT FIND ANY ADDITIONAL NETWORK (DIAL-UP AND VPN) OTHER THAN THE WIRELESS NETWORK

  ehmm I just installed nokia 6600 pc suite on my computer so I can access the internet on my computer through the usb cable. Installation and drivers have been installed correctly. I can access the internet on the handset but when trying to connect to the internet via USB with the computer "I get a message that windows cannot find any additional network." Its really disturbing that I can do to fix this. Can someone help me please.

  Even if a USB device, it does not create a new network connection for you.  I fear also that you use a regular USB cable - those connections often require a crossover cable (but more on that later and I guess it should work it is how it is advertised).  Go to start / Control Panel / Network and sharing center / set up a connection or network / and choose the first option (you can also check the main page to see if the connection is listed but I doubt it).  Choose to set up a new connection and follow the instructions - ensuring that you enter the correct settings when it is required.  You should perhaps install device drivers, firmware and or software for the device to work properly - read the installation mode (and call technical assistance from Nokia to help you put in place - they know more about what we do and should be happy to guide you through the process and even to set the settings on your computer until you log - that's what I would do in your before circumstane even of) ask for help here).

  To start / Control Panel / Device Manager and check all the new drivers (double clck on them) to confirm that they say that they do not work properly.  Go to start / Control Panel / Add Haedware and have the system check new hardware devices - if it finds, install them (it is perhaps what is missing in this process).

  I hope this helps.  If nothiing suggested I bring, don't hesitate not to contact Nokia for assistance - I'm sure they'll have you place and operate at any time.  Keep me in the loop.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.