Windows 7 disc to a newer hard drive cloning lose my activation?

Similar Questions

• Can I reinstall Windows Vista professional, a recovery disc on a new hard drive for my 6820 s?

  I am selling my old laptop HP 6820 s to put the money to another and the main problem is that the original hard disk having bad sectors that prevent me from reinstalling Windows Vista Professional using the recovery disk. I was wondering if I bought a new hard drive of the same size and type, I was able to reinstall Windows Vista Business on it, especially since I still have the original key on the laptop itself.

  If the hd meets the specification, you should be able to install using the recovery discs.

• Windows XP home on a new hard drive installation

  I have an Omnibook xe2 with a new hard drive. The old hard drive has windows 2000 pro on this subject. The hard drive failed completely. I bought a new hard drive for her specifically for the Omnibook xe2. I don't have the disc pro 2000 windows or a boot drive for it. I have a XP home disc. How can I install the XP home without that old operating system disk pro 2000? Microsoft says that I need the old pro 2000 disk to load the new XP home system. Thank you for your help.

  If your XP disc is an 'Upgrade', you will need an earlier version of windows will first be installed on the computer ie: Windows 2000. If the XP disk is a "full" Version you will need to set the BIOS to boot from the CD drive, and then boot from the drive and install Windows XP. To set the boot order, press on and press f2 at startup. Follow the prompts to set the boot order for the CD/DVD drive. Save the settings and exit. Place the disc in the CD drive and start the computer, follow the prompts to install Win. XP

• DV6 - 6167cl: need to win 7 recovery disc for a new hard drive

  I do not know what operating system Windows 7, my laptop had, but I need to put Windows 7 on my laptop HP dv6 - 6167cl recovery disks.

  My original question was that my laptop could not restore or anything on its own.  After calling HP support and carry out a guided diagnostic test, it was determined that my hard drive was bad.  I bought a new hard drive and replaced it, but need to get Windows 7 return on that.

  Thank you!

  Hello

  Unfortunately, there is no option to download the recovery media - discs, or a usb flash drive must be ordered from HP by following the link in my previous post.

  For the version, the possibility of order recovery media is only listed under Windows 7 64 bit and that's what I would have expected your laptop to ship with - it is your machine comes with 6 GB of Ram and would require a 64-bit OS to be able to access what anyone more than 4 GB

  Another option that you might consider is to create your own Windows 7 installation disc.

  Before you try the following, make sure that you can always read the entire key 25 character product activation on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC - just download the Disk Image correct ( this must be the same version that originally came with your laptop - it is listed as Windows 7 Home Premium 64 - bit ) from the link below and use an app like ImgBurn ( Note: you can deselect additional software during installation of ImgBurn offerings) to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  The source of the Windows Image is Digital River.

  Windows 7 Home Premium 64 bit SP1.

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  You may need, additional drivers and software are here.

  Kind regards

  DP - K

• Windows 7, re - install the new hard drive was a success, but I now get guests that it is not valid, and I need to buy Windows 7

  From January 2013, after a series of about 13 automatic updates, Windows 7 hang in the boot process.  Using the repair function of the system on the Windows 7 installation disc, I was able to select a restore point at the beginning and Windows would be operated until I chose shutdown and updates would be automatically install 13 updates and then freeze at startup.  Finally, in a workaround, I would choose standby extended instead of shutdown until the system would break down after 10 days.    After going through this loop until the end of February, I bought a new hard drive and installed Windows 7 again.  I used the product key and the OEM ID on the back of my Acer Aspire 5253 - BZ849, but keep getting prompts is not valid.  How can I get this fixed WITHOUT PAYING for WINDOWS AGAIN!

  The product key on the back label of the Acer PC is: * product key removed privacy * (initially, it has been accepted as valid.  Now I get guests that it is not and I have 22 days to activate.)  There is also a code in parentheses (X 16-96072), followed by 168-00196-149-361.

  Other data are product ID: 00359-OEM-8992687-00006

  The following Diagnostic Report:

  Diagnostic report (1.9.0019.0):
  -----------------------------------------
  Given WGA-->
  Validation status: genuine
  Validation code: 0

  Code of Validation caching: 0x0
  Windows product key: *-* - VFP73 - B9WVC-W84BD
  The Windows Product Key hash: X7U6R5xvKJwITn/mt/K9SSBRVrk =
  Windows product ID: 00359-OEM-9816812-49361
  Windows product ID type: 8
  Windows license type: COA SLP
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {CBE2FBB4-8A96-44A3-B53B-A89D7AC2D5F8} (1)
  Admin: Yes
  TestCab: 0x0
  WGA Version: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.130104 - 1431
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  WgaER data-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  WGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 100 authentic
  Microsoft Office Standard 2007-100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Internet Explorer\iexplore.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {CBE2FBB4-8A96-44A3-B53B-A89D7AC2D5F8}1.9.0019.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-W84BD00359-OEM-9816812-493618S-1-5-21-3043357091-958766540-506442348AcerAspire 5253AcerV1.1120110425000000.000000 + 000C6203007018400FC04090409Eastern Standard Time(GMT-05:00)03ACRSYSACRPRDCT100100Microsoft Office Standard 20071228D727E4AEA970Eo9pPGB5tREOLSGNBIe + lixmnuZ0 = 1 81607-903-2756143-64835

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_COA_SLP
  Activation ID: 5e017a8a-f3f9-4167-b1bd-ba3e236a4d8f
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00196-168-149361-02-1033-7600.0000-0712013
  Installation ID: 011270290203018496573530022091757890631021023321580540
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: W84BD
  License status: initial grace period
  Time remaining: 31800 minute (s) on (22 day (s))
  Remaining Windows rearm count: 4
  Trust time: 21/03/2013-16:37:33

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0x00000000
  Beyond: PASS
  Event timestamp: 3:16:2013 15:10
  WAT Activex: registered
  WAT administration service: registered

  --> HWID data
  Current Hash HWID: LgAAAAEAAgABAAEAAAACAAAAAQABAAEA6GHg0Gyi3MFU + QArIHFiPUqF6j / 8 it ==

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC ACRSYS ACRPRDCT
  FACP ACRSYS ACRPRDCT
  HPET ACRSYS ACRPRDCT
  START ACRSYS ACRPRDCT
  MCFG ACRSYS ACRPRDCT
  SLIC ACRSYS ACRPRDCT
  SSDT AMD POWERNOW
  SSDT AMD POWERNOW

  the first time you use the COA key, you need to activate by phone

  How to activate Windows 7 manually (activate by phone)

  1) click Start and in the search for box type: slui.exe 4

  (2) press the ENTER"" key.

  (3) select your "country" in the list.

  (4) choose the option "activate phone".

  5) stay on the phone (do not meet all the automatic guests) and wait for a person to help you with the activation.

  (6) explain your problem clearly to the support person.

• Install Windows 7 upgrade on the new hard drive?

  I have the Windows 7 upgrade version that I installed last September, but a few days ago my hard drive died.  How do we install the version 7 upgrade on the new hard drive without using a previous version of windows on it?

  In order to install the Windows 7 upgrade version, you must have a system of eligible operating Windows installed and activated.  You cannot install a version upgrade of Windows 7 on a drive blank.  The installation procedure you do not insert a Windows disk in the drive for verification, eligible operating system must be installed.

  If you do not have a qualification system of operating Windows installed with an activated genuine license, then you can not use the version upgrade of Windows 7 - you would need a license of Windows 7 "full version".

  In summary:

  1. a Windows operating system to eligible address must be installed.
  2. the Windows operating system to eligible address must have a genuine license (product key) and it must be enabled.
  3. to upgrade, boot on the eligible Windows desktop, insert the Windows 7 upgrade disc in the DVD player.
  4. when the menu appears, select custom (advanced option) to a clean install procedure.

  You should be able to repair the installation, if your installation one fall. I suggest create you a System Image (backup) of your installation of Windows 7 after installation of Windows 7 in order to spare you the trouble if your computer one fall in the future.

  You can work around this two ways, I would suggest that you create a System Image (backup) of your installation of Windows 7 after installation of Windows 7 in order to save you the trouble if your computer loses the system failure or instability. Since you are in possession of a valid license of Windows Vista for this computer, you can use the following method to do a clean install with upgrade support:
  http://www.winsupersite.com/Win7/clean_install_upgrade_media.asp
  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Can I reinstall the upgrade to Windows 7 Professional on a new hard drive without any problem of product/activation key?

  Recently, my hard drive crashed and could be damaged, because I can not install anything on this subject.

  I still have the CD of Windows XP Professional that has been used to upgrade to Windows 7.
  So, if I buy a new hard drive and install XP first and then upgrade to windows 7. I'll be able to
  to do this without side windows activation problems.
  Or do I have to buy a new drive for windows?
  PS: Is it important that it is the version of Windows 7 professional student discount?
  Thank you.

  If your computer comes with a qualifying previous license such as Windows Vista or Windows XP and the certificate of authenticity is still attached to the machine in good condition, then the COST is reason enough to represent the compliance to the software license agreement. No previous required software installation, which means you can do a clean install with Windows 7 Upgrade disk.

  How to do a clean install with upgrade disc:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Satellite A100 - how to install "Windows XP MCE" on a new HARD drive?

  I have a laptop Satellite A100-495. the cd/dvd does not work and I have a new hard drive. Now, I want to install the original os (windows xp professional, mce).
  I'm trying to put the files of my original restore on a USB cd but never works and I did not find useful clues in any part of the forum.

  Is there anyone out there who can help me?

  Hi, marawe

  It would never work if you just copy the files from recovery Cd on a usb key. You need to make a BOOTABLE FLASH DISK, to do you need an application like Flashbot... Google.
  Download and install it, after that you can make a bootable usb key.
  You should know that your Bios must support boot with a Usb key, I don't know about your knees. Otherwise, you cannot do so. Hope it works

  Welcome them

• If I buy a new hard drive, I use the activation number provided with my computer to re - install Windows XP?

  activation and replacement hard drive

  Greetings from St. John's Newfoundland. My wife has given car for my birthday washer and I wiped the ENTIRE hard drive, including the operating system. (XP). I have recovery CD but the computer will not read and install XP. I want to know it is if I buy a new hard drive, can I use the activation number provided with my computer to re - install Windows XP?

  Hello

  Yes, you can use the activation code for re - install Windows XP.

  Note: If you have exceeded the number of times to activate the product, then you would not be able to activate, you may need to contact the manufacturer to perform a factory restore.

• I can't install Windows XP Professional on my new hard drive.

  original title: I can not get my copy of windows xp pro to record

  I had to buy a new hard drive to my HP pc, I rebooted my windows xp pro.  Now, I can't activate.

  It would be useful to describe some of the problems that you are running in...
  You may have to call to activate Windows.
  Try the following article to see if it helps...

  "How to activate Windows XP"
    <>http://support.Microsoft.com/kb/307890 >

  HTH,
  JW

• Download windows 7 Professional on my new hard drive

  I have a laptop Dell Latitude and recently my hard drive in the laptop has stopped working due to 'click of death' and it had Windows 7 Professional 64-bit version.  So I bought a new hard drive to replace the old hard drive, but I don't have windows 7 Professional 64 - bit full version DVD to do a fresh install even though I have a product key for it.

  How can I download windows 7 Professional 64 - bit full version and install it on my new hard drive. Please help me.

  Thank you
  Dietsch

  Download Windows 7 proper. ISO file (must match for your product key version)

  Windows 7 Professional 64-bit: http://msft.digitalrivercontent.net/win/X17-59186.iso

  How do I know if I have a version of 32 or 64 Bit of Windows installed on my computer:
  http://Windows.Microsoft.com/en-us/Windows7/find-out-32-or-64-bit

  After downloading the file correct .iso using ImgBurn or ISO gear to burn a bootable DVD.

  Create a Windows 7 Bootable DVD using the. ISO file
  Engraving of a file of Windows 7 ISO on a DVD
  http://support.Microsoft.com/default.aspx/KB/977640

  ImgBurn - in addition to supporting the creation of CD/DVD of. ISO files,
  It supports a wide range of image file formats, and it's free.
  (BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
  http://www.ImgBurn.com/

  Projectiles help you to use ImgBurn to screen: http://www.imgburn.com/index.php?act=screenshots
  Burn the ISO Images with ImgBurn article: http://neosmart.net/wiki/display/G/Burning+ISO+Images+with+ImgBurn
  (Les étapes sont les mêmes pour Windows 7 ou Windows 8), except that you do not create a repair disk but complete an installation DVD)

  Note: Always use high quality DVD + R media and slower burning speed (4 x or 6 x) offered a choice.

  ====================== Device Drivers =================================

  Go to your computer manufacturer's support web site and search for Windows 7 drivers for your specific model number.

  If there are Windows 7 drivers, then to download to a folder on your hard drive and install all of them, starting with the card drivers mother/chipset, SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.

  J W Stuart: http://www.pagestart.com

• Windows 7 installation on the new hard drive failure

  Install Windows 7 on a new hard drive. The new HDD is 750 GB Sata 3 GB 7 200 RPM.

  Windows 7 will not finish installing.

  Commissioning of repair using windows in the drive disk cannot complete until the end of Windows 7 install.

  I had installed Advanced. Creates a new 30 GB partition. Windows will create a 100 MB partition. I installed Windows 7 on the 30 GB partition. It will go the whole process until the completion step. It restarts, the blue screen appears. Where, it is said,

  (Attempt to Reset display driver and recover from Timeout failed.)

  If market, it will start to the top and do the samething.

  Before that my old hard drive went bad, I did a Windows 7 upgrade and updated all the drivers. Everything worked very well.

  Now, this is a full installation of Windows on the hard disk again.

  Here is the computer info I had saved.

  HP Pavilion a6250z PC
  -Genuine Windows Vista Home Premium (32 bit)
  -AMD Athlon (TM) 64 X 2 5600 + dual core - 2.8 GHz
  -3 GB DDR2 - 667 MHz dual channel SDRAM (2 x 1024, 2 x 512 MB)
  -512 MB NVIDIA GeForce 8500GT, DVI - I, TV, HDMI out
  -802.11 b/g USB Wireless LAN card & USB external modem
  -HDD 400 GB 7200 RPM SATA 3 Gb/s
  -LightScribe 16 X MAX drive DVD +/-R/RW SuperMulti
  -16 x Max DVD-ROM
  card reader memory 15 - in-1, 1394, 3 USB, audio
  -Tuner TV ATSC-NTSC with PVR, FM tuner, remote control
  -7.1 audio channels w/front audio ports integrated

  What I am doing wrong?

  Thank you for helping me

  I solved my problem.

  I replaced the NVIDIA card and did a fresh install and everything works fine.

  Just a ton of updates and it will be like new.

• Can I use recovery discs on a new hard drive on a dv4?

  I know that the hard drive is toast in my dv4. Can I use the recovery disks that I did when I got the computer to load a new hard drive?

  Yes you can. It is the purpose of having the recovery media.

  Replace your hard drive by another of equal or greater capacity. This does not mean using a superior to 750 GB hard drive, if your had not installed during delivery.

• Recover Windows Vista and Office to new hard drive

  original title: had to install a new hard drive... How can I get Vista / back-office?

  My hard drive crashed.  Installing a new.  But how to make office of vista installed on new hard drive.  the computer came from HP with vista / office is already installed.

  http://welcome.HP.com/country/us/en/contact_us.html

  Contact HP options at the link above.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  See you soon.

  Mick Murphy - Microsoft partner

• Reinstall Windows Media Center under Windows 7 Ultimate after the new hard drive, installed using Microsft Windows 7 disc

  I had the misfortune I had to replace my hard drive on my Toshiba laptop after reinstalling my Windows 7 Ultimate disc, I find that I am unable

  load the Windows Media Center software. When I click on the location of the file, some files are visible, but it does not load.

  Can I use the disk window to replace or repair the Windows Media Center files without causing other problems?

  Don Winston Hills NSW Australia

  Open your Start menu by pressing the Windows key and type FEATURES in the search box. Select 'Windows turn features on or off ". When the Panel opens, expand the category "Media Features" and place a check in the box "Windows Media Center". You may need to restart after Windows reconfigures itself.