Windows 7 do not remember the program updates after roll back to windows 10

Similar Questions

• Windows XP does not install the automatic updates.

  Original title: kopieerfout

  After several years, my laptop with Windows XP does not install the automatic updates, giving only a mistake:

  "

  ER is een doing opgetreden bij het van het bestand ntoskrnl.exe copying

  Kan het bestand niet naar doelmap copying.

  Everything works OK.

  Thanks for your help

  Everything works OK.

  It seems that it is not... Why Dutch? You use or have the corresponding language version installed?

  Free translation of message:

  "An error occurred during the copy of the file ntoskrnl.exe
  Cannot copy file to destination... »

  Please note that ntoskrnl.exe is a process in the cycle of the initial startup on your computer program.

  Try to load your "last known good configuration".

  The issue is also known to be caused by a short circuit in the ground cable into the keyboard cable. Make sure that it is not the cause of your error by replacing the keyboard with another keyboard or just disconnect the keyboard from the computer. You can also look at your function "Add or remove programs" If KB2686509 <> http://support.microsoft.com/kb/2686509 > is installed.  Install manually if it is not.

  If the above doesn't help, try using the Sfc.exe tool - see here > http://support.microsoft.com/kb/310747

  Or run the Chkdsk tool - see here > http://support.microsoft.com/kb/315265

  If still no luck, you may need to restore the file ntoskrnl. exe as follows:

  1 - insert the Microsoft Windows XP CD. Note: If you have a recovery CD or a restore CD and not a Microsoft Windows XP CD is probably the procedure below does not solve your problem.

  2 - restart the computer and that the computer starts, you should see a message press any key to boot from the CD. When you see this message press any key.

  3. - in the Microsoft Windows XP setup menu, press the R key to enter the recovery console.

  4 - Select the operating system you want to set and enter the administrator password.

  5 - type expand d:\i386\ntoskrnl.ex_ c:\windows\system32

  6. - you will be asked if you want to overwrite the file, type Y and press enter to replace the file.

  7 - type exit to restart the computer.

  Hope this helps - good luck!

• Did not receive the last updates of Windows XP.

  Original title: update XP final

  I have not received the final updates for XP today. I tried to install them manually but can't because support for XP is completed. Is there a way I can get them?

  Yes, as of April 8, 2014, these are the latest updates for Windows XP, but since Microsoft has confirmed publicly that they will continue to develop and test the Windows XP security updates - since they are obliged under contract to the many millions of PCs under enterprise agreements including groups like the Government of Britain and the Netherlands.

  So, finally Microsoft kind of will have to offer updates for Windows XP for at least another year.

  They also distribute updates for Windows XP Embedded (plus all ATMs in the world), it is another way of development for those same updates :)

• my windows vista computer will not except the automatic updates and the system starts it configures only the updates

  original title: my windows vista will not except the automatic updates and the system starts it will only configure the process which can be done to solve this problem

  my windows vista computer will not except the automatic updates and when the system starts it will only configure the process which can be done to solve this problem

  Hi Glennisidore,

  Try running the fixit http://support.microsoft.com/kb/971058 in aggressive mode and see if, after the reboot, you are able to perform your edits again.

• Error trying to open .jpg from an SD card image using Windows Photo Gallery: this file format is not supported, or you do not have the latest updates of photo gallery

  Vista - Photo Gallery

  Tried to upload a .jpg from an SD card image (the image was scanned with a Pandigital Photo converter, slide, negative (model # 05 PANSCN).) This message appeared in the photo gallery, "Photo Gallery can't open this photo or video. This file format is not supported, or you do not have the latest updates to the photo gallery. "I inserted the SD card even in a HP Photosmart C6280 printer; the printer has recognized the file and print the photo. The converter from Pandigital is useless unless the Vista updates can 'cure' photo gallery. What do you, Microsoft?

  Tried to upload a .jpg from an SD card image (the image was scanned with a Pandigital Photo converter, slide, negative (model # 05 PANSCN).) This message appeared in the photo gallery, "Photo Gallery can't open this photo or video. This file format is not supported, or you do not have the latest updates to the photo gallery. "I inserted the SD card even in a HP Photosmart C6280 printer; the printer has recognized the file and print the photo. The converter from Pandigital is useless unless the Vista updates can 'cure' photo gallery. What do you, Microsoft?

  =====================================
  Just one question... when done scanning and recording of the scans...
  you select the options to reduce the file size by compressing
  the photos?

  If you have only a few of these scans... you could open their
  one at a time in Windows Paint and go to... File / save as...
  Enter a new name, choose a backup folder and choose .jpg.
  This will create a new version of the same photo and I suspect
  It will be compatible with Windows Photo Gallery.

  Also... it may be interesting to try to install Windows Live Photo Gallery.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Download Windows live Photo Gallery
  http://explore.live.com/Windows-Live-Photo-Gallery
  (There are other applications included in the download...
  Uncheck the ones you don't want)

  No guarantee... but there is a possibility that reinstall
  DirectX can improve this problem.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  End-user Runtime Web install DirectX
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=2da43d38-DB71-4C1B-bc6a-9b6652cd92a3&displaylang=en

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• I have Windows 7. It is not download the available updates. I tried changing the settings, but without success. Please fix this for me!

  I have windows 7 which is not download the available updates. I open windows update and changed several times. After checking the updates for several hours the system provides no updates, although indicates they are available. I'm having a problem in using the recovery feature in control because of this Panel. Please correct the deficiency.

  Post proposed by the facilitator for the appropriate forum placed

  Windows 7 update problems? First read this.

  :)

• "windows can not find the new updates" when you click check updates

  Hello, I'm sorry for the confusion caused with my previous post. The error I got is 'windows can not find the new updates' when you click check updates. It displays a notification to install the new updates on the desktop and displays the 80072EFD error code. Please help me to get this resolved. Its 32-bit windows 7.

  OT:

  Windows

  First, update your anti-virus software and run a scan completes. Then:

  If you have not already seen it this article, it may be interesting to read through to check it out - http://windows.microsoft.com/en-us/windows/windows-update-error-80072efd#1TC=windows-7

  If it still fails to run the resolution of the problems of Internet connection (from Control Panel) and see if that finds & correcting something. More details here - http://www.dummies.com/how-to/content/how-to-troubleshoot-windows-7-internet-connection-.html

• I use a database program in a number of previous versions of windows and windows 7 does not allow the program to launch denial of service.

  Application of program compatibility does not start

  I use a database program in a number of previous versions of windows and windows 7 does not allow the program to launch denial of service.  What gives?

  If you have Windows 7 64 bit without BACK program can run because there is no 16-bit subsystem to run it.

  Try dosbox http://www.dosbox.com/. If that won't work your program, you'll need either a new database or run the BACK or on a 32-bit version of Windows in a virtual machine like VirtualBox https://www.virtualbox.org/.

• I had to order Photoshop Elements - and choose Mac, but during the next steps, he switched to Windows. It must be possible to return to Mac, - how? I have not downloaded the program.

  I had to order Photoshop Elements - and choose Mac, but during the next steps, he switched to Windows. It must be possible to return to Mac, - how? I have not downloaded the program.

  you need a mac serial number.  If you have received

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | 9,8 | 9 standard | 8 standard
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• I'm LR4 running on a pc. Control-Q does not close the program. (Sometimes it changes the selected color to b &amp; w image.) I was closing the window by right-clicking on the LR icon in the taskbar and selecting "close window." Is - it really close the

  I'm LR4 running on a pc. Control-Q does not close the program. (Sometimes it changes the selected color to b & w image.) I was closing the window by right-clicking on the LR icon in the taskbar and selecting "close window." Is this really close the program? (It also changes an image n & b).

  -> Output file, or by clicking on the red X in the upper right, should work.

  CTRL-Q should work unless there is a Windows keyboard command that replaces it.

• Bluetooth does not work: the program cannot start because TOSBAPI. DLL is missing

  Original title: SoS Bluetooth

  MY LAPTOP HAS THE BUTTON / OFF VOLTAGE, I DID A FORMAT BUT WHEN I CLICK-TO-BLUETOOTH DOES NOT WORK, I HAVE THIS MESSAGE: COULD NOT START THE PROGRAM AS TOSBAPI. DLL IS MISSING ON MY COMPUTER, I CAN'T REISTALLING THE PROGRAM TO FIX THIS PROBLEM.

  Hello

  ·         What is the brand and model of the computer?

  ·         What operating system do you use?

  ·         You have installed the Bluetooth drivers?

  Follow these methods and check if that helps:

  Method 1:

  Run the hardware and devices Troubleshooter and check if that helps:

  Open the hardware and devices Troubleshooter

  Method 2:

  I suggest you to update the latest Bluetooth drivers on the manufacturer's Web site and check if it helps

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3: Follow the steps in this link and check:

  The problems with the (also valid for Windows 7) Bluetooth devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  See also:

  Add a Bluetooth device to your computer
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

• The desktop icon can not find the program

  I'm having a problem where when I click on my desktop icons they can not find the program that is associated with run.

  Most of them is related to sites Web that I often use, so I select Internet Explorer as the associated program then remember this radio button, but when I connect and get back in that I get the same error.

  I am running windows XP, I say this because I've posted this before, and I referred to a difficulty which will not work with this operating system.

  Any help would be appreciated.

  Hello JoseVasquez,

  Try the automatic solution of the following article:

  Article ID: 307859 - how to change or choose which program starts when you double-click a file in Windows XP
  http://support.Microsoft.com/kb/307859
   
  This should help to restore default associations in Windows XP.

  Thank you

  Marilyn

• Can not install the kb2481109 update, see log attached

  Can not install the kb2481109 update, see below

  1.328: 11:36:42.796 24/08/2013 (local)
  1.328: c:\161c59ea6306a628592717476ee96b\update\update.exe (version 6.3.13.0)
  1,344: hotfix started with following command line:
  1,344: in function GetReleaseSet, line 1240, RegQueryValueEx failed with error 0x2
  1515: C:\WINXP\system32\mstscax.dll is present
  1515: condition succeeded to the Presence.RDCInstallBlock.Section section in row 1 prerequisites
  1515: FileVersion C:\WINXP\system32\mstscax.dll is less than 6.0.6001.0
  1515: condition in Test.RDCInstallBlock.Section failed with the fist
  1515: Check condition for line 2 of prerequisite returned FALSE
  1515: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
  1,515: KB2481109 Setup has encountered an error: Setup cannot continue because one or more prerequisites required to install KB2481109 failed. For more details, check the c:\winxp\KB2481109.log log file
  1,562: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
  1,562: Setup cannot continue because one or more prerequisites required to install KB2481109 failed. For more details, check the c:\winxp\KB2481109.log log file
  38.890: message displayed to the user: Setup cannot continue because one or more prerequisites required to install KB2481109 failed. For more details, check the c:\winxp\KB2481109.log log file
  38.890: user input: OK
  38.890: Update.exe extended error code = 0xf0f4
  38.890: Update.exe return code was masked to 0 x 643 for MSI custom action compliance.

  Hi Keith,

  I would have you look at the article-

  http://support.Microsoft.com/kb/958051#top

  http://support.Microsoft.com/kb/883824

  http://support.Microsoft.com/kb/822798#top

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/

  Make sure that you back up the data on the computer before you continue.

  Thank you.

• Do not install the KB2686505 update

  Do not install the KB2686505 update

  Hello

  You receive an error message/code?

  You did changes to the computer before the show?

  As a work-around I suggest you refer to the following method.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attack.

   

  Method 2: Perform a clean boot before proceeding with the update of windows.

  Note: After the boot minimum troubleshooting steps, restore your computer to Normal startup mode.

   

  Method 3: Reset the Windows Update components.

  http://support.Microsoft.com/kb/971058

   

  Method 4: Let us first start the SFC scan and check if there are any file system corruption. You need windows XP disk to perform the analysis.

  1 put the Windows XP CD in the CD-ROM.
  2. click on 'Quit' if the auto-menu appears.
  3. click on 'Start', then click on 'run '.
  4. Type "SFC/scannow" (without the quotes) in the "Open" box, then click on 'OK '.

  Note: There is a space between "SFC" and "/ Scannow".

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  More information on SFC scan found in this document:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  You can also manually install the update (numbers KB) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

• Update are not not in the installed updates

  I am running Vista SP2.

  I'm having the problem of police that the other discussions say is related to the KB3013455 update.

  This update is listed in my story to update as being installed successfully on 11/02/2015.

  This update is not listed in my installation to date.  Indeed, no update with no title "update security for Windows Vista for x 64...-based systems. "are listed in the installed updates.

  Is other that do a system restore and delete all updates to 10/02/2015, there a way to remove the KB3013455 if it is not in the installed updates?

  I was going to check a few more updates.  When I rebooted updates installed, he showed updates - as KB3013455 - missing previously.  Problem solved, sort of.