Windows 7 does not connect to other computers in the same homegroup network
Computer is a Dell Latitude E6500 in good working condition. Printer is connected to a desktop computer running on Pentium IV with HP LasetJet 2100. The Pentium IV is only for printing but must be able to make a link to it. All systems have max ram and large capacity disks. All systems are running Windows 7.
Hello Willard,
Thanks for posting your question on the Microsoft community.
I would like to know some information about the problem so that we can help you better.
1. what happens when you try to connect to other computers? you receive an error message or code?
2 update you installed before the show?
Thank you to provide detailed information on the issue and your efforts to resolve.
This problem can occur for the following reasons:
-Network discovery may be turned off.
-Password-protected sharing is turned on.
I would suggest trying the following methods and check if it helps.
Method 1:
Run the network troubleshooting and check.
Reference:
Using the troubleshooter from network in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
If this does not help, use method 2.
Method 2:
Please use the suggestions contained in this Microsoft support article and check the issue.
Reference:
Why can't I connect to other computers?
http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-other-computers
I hope this information helps.
Please let us know if you need more help.
Thank you
Tags: Windows
Similar Questions
-
I am weather evauating to buy Dreamweaver CS6...
Trial of Dreamweaver CS6 (on Windows 7) does not connect to the IIS server (v7) using "FTP over SSL/TLS (explicit encryption). I have a NEW Godaddy SSL certificate installed on the IIS server.
On the connection between States Dreamweaver: "server certificate expired or contains invalid data."
I tried:
-ALL Dreamweaver Server configuration options
-L' use of multiple certificates (I tried 2048 and 4096-bit Godaddy SSL certificates)
-Make sure the certificate "issued to the"domain name is my domain name. "
I am able to connect without a problem with Filezilla, Filezilla equivalent affecting 'explicitly require FTP over TLS. I can connect both using Microsoft Expression web.
This has been discussed previously. I recommend reading my old thread for details:
http://forums.Adobe.com/thread/889530
But to make a long story short, Godaddy is incorrectly signed SSL certificates on shared servers. The servers/ips/domains and the certificate do not match. So DW and many other tools fail authenticate with Godaddy SSL connections. Some users have stated that other tools FTP, such as Filezilla as you mentioned, bypass and automatically change your connection to insecurity, but DW is very picky. Once you modify encryption against zero, the connection will be accepted. Best solution is if you want a certificate SSL correctly signed move to another host because Godaddy refuses to admit that they are wrong with SSL certificates on their sites. These warnings will appear also to your users if you have a store saying the SSL certificate does not match the domain/ip and this can make users checking in a very nervous showcase.
-
Laptop with Windows 7 does not connect with the router
(Not this computer) laptop with Windows 7 does not connect with the web. Box of message says - "t8ExtPEx.dll is missing". Any help is appreciated.
(Not this computer) laptop with Windows 7 does not connect with the web. Box of message says - "t8ExtPEx.dll is missing". Any help is appreciated.
Hi Roger,
We would like to learn more about the issue. You get this message when you launch your Internet Explorer, or when you work with all Office applications?
You can also try the solution posted by Redcar92 on this link: 8ExtPEx.dll is missing.
Let us know how it goes.
-
Windows 7 does not connect to the new wifi networks
I have a problem with connecting to wifi networks. My laptop only connect to wifi networks that I have already connected to in the past but does not connect to all nine. The computer will recognize the but won't give me the possibility to type in any password. For example, I can connect correctly to the House and my moms place as wifi passwords are already saved on my computer. However if I go to a friends house their wifi signal will appear but when I go to connect I will not have to enter a password, the mouse cursor will simply show it to load a few seconds and then nothing happens.
Can someone help me?
Hello James,.
Thanks for posting your question on the forum of the Microsoft community.
I would like to know some information about the problem so that we can help you better.
What is the brand and model of your computer?
This problem can occur for the following reasons:
-WEP, WPA or WPA2 key or password security issues.
-Incorrect network connection settings.
-Corrupt or incompatible drivers.I would suggest trying the following methods and check if it helps.
Method 1:
Run the network troubleshooting and check.
Reference:
Using the troubleshooter from network in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7If this does not help, then use method 2.
Method 2:
Please use the suggestions contained in this Microsoft support article and check the issue.
Reference:
Wireless and wired network problems
http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1I hope this information helps.
Please let us know if you need more help.
Thank you
-
Why can I see my other computers on the same LAN after typing netstat b in same cmd if I didn't make any connection? owner of 192.168.1.104:50768 result [svchost.exe] TCP - PC:5357 ESTABLISHED
Hello
Thanks for asking!
This is because the network discovery is turned on.
If you want, I suggest try tuning off the COAST of the discovery of the network and check if it helps.
Enable or disable network discovery
http://Windows.Microsoft.com/en-us/Windows7/enable-or-disable-network-discovery
Reply back with the results. I'd be happy to help you further.
-
Firefox does not connect to any site since the new update to download.
Firefox does not connect to all websites since the installation of the last update. Google Chrome and Internet work.
Some problems occurs when your Internet security program was set to trust to the
a previous version of Firefox, but no longer recognizes your updated as version
level of confidence. Now how do I solve the problem: to allow Firefox to connect to the Internet
Once again;- Make sure your Internet security software is up-to-date (for example, you are using the latest version)
- Delete Firefox to list your program of trusted or recognized programs, then add it again. For detailed instructions, see
Configure the firewall so that Firefox can access the Internet. {web link}
-
my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem.
Try to restart your machine and pressing F8 before the spash screen Windows appears. Choose the option "last last known good configuration".
If this fails, you can try to repair your installation of starting for the original CD-ROM for Windows XP installation and choosing the option 'Fix' when prompted.
-
Homer in Windows Server does not connect to the internet.
I installed Windows Home Server on a self-built media server. Everything on the hardware is working properly. The server software is installed. The ethernet line is connected to my Linksys router. The power light is on decision-making on the case ethernet connection. The power led is on the router where the ethernet is connected. So, in my view, that the issue is not material.
Problems:
1. the server does not connect to the internet.
2. my computer does not recognize the server when I install the Windows Home Server Connector software.
3. the wizard of Linksys on my computer does not recognize the server as a "new device".I feel like I'm missing a driver, maybe a driver of ethernet controller, but do not know how to diagnose the problem. I downloaded the Windows tool that identified the problems I listed, but solutions are not feasible.
Any suggestions?
Hi Mikey1947,
You can check this link, try the suggestions provided and check if that helps
http://social.Microsoft.com/forums/en-us/whsfaq/thread/15a9e657-54a3-453F-B0E7-1efa59b7feea
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Installation of Windows 7 does not connect to the modem broadband.
I installed characteristic of two different versions of Win 7 64 on my desktop at different times.
The two does not connect to my modem. I get error 651. I've tried everything.I have consulted my ISP, checked the provider. The installer works fine with other OS and Win 7 on another computer.My office tells me that there is no driver installed. There is no driver to install.I need a connection to the firmware in the modem to work, something that seems missing from Win 7 Home Premium 64.Your background of catch-22LCWSee this previous post/answer
PS after I clean installed did you get your motherboard manufacturer system drivers, if a generic desktop computer, or if from a major manufacturer, for example Dell/HP support site?
-
Windows Explorer does not work properly and hold all the time
I have Windows 7 Professional as a platform. In the end, I find windows Explorer does not correctly and hold all the time. Pls advise on how to solve this problem. Note I am not a computer Savvy and I need a step by step approach.
Thank you for your time and enjoy your time.
.
Hello
Use the startup clean and other methods to try to determine the cause of and/or
eliminate problems.---------------------------------------------------------------
References to Vista also apply to Windows 7.
What antivirus/antispyware/security products do you have on the machine? Include
everything you've ALWAYS had on this machine, including those you have uninstalled (they
remains of leave behind which can cause strange problems).----------------------------------------------------
Follow these steps:
Try these to erase corruption and missing/damaged file system repair or replacement.
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows
Vista or Windows 7
http://support.Microsoft.com/kb/929135Use advanced tools to solve performance problems in Windows 7
http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/Problems with the overall speed of the system and performance
http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes without doing anything-
then right click on taskbar - task manager - take a look at stored by -
Process - Services - this is a quick reference (if you have a little box on)
Lower left - show for all users, then check that).How to change, add or remove startup programs in Windows 7
http://www.SevenForums.com/tutorials/1401-startup-programs-change.htmlIs a quick check to see who are loading method 2 - using MSCONFIG
then after a list of these here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out what files, registry keys, and other objects
processes have open, which DLLs they have loaded and more. This unique
powerful utility will show you even owned by each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically
When your system boots and you connect. Autoruns also shows you the complete list
locations of registry and files where applications can configure start automatic settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor file system, registry, process, thread and DLL
activity in real time.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspxWhatsInStartUP - free - this utility displays the list of all applications that are
loaded automatically when Windows starts. For each application, what follows
the information is displayed: Type of startup (registry/Startup folder), Command - Line
Channel file, the product name, Version, company name, location in the registry or
file system and more. It allows you to easily disable or remove unwanted programs
that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe
not. The window Watcher says it all, every window created by each execution of the statement
program, if the window is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Think about it an absolute must - manually update your drivers.
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded
on your system. For each driver in the list, additional useful information is
Poster: load address of the driver, description, version, product name,.
company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit Maker as replacements and system manufacturer of device which are
the most recent. Control Panel - write - graphics card - device manager
the brand and complete model of your video card - double click - tab of the driver-
Note the version information. Now click on UPdate Driver (this can do nothing
MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
This will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
If there are 3rd party with their own software and drivers and the other main device drivers
you have.Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
their latest versions. (Look for the system to update the BIOS, Chipset and software updates
Site of the manufacturer here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
REBOOT after each installation.Always check in the Device Manager - drivers tab to be sure the version you are
installation actually appears. This is because that some rollback of drivers before the
later is installed (particularly that audio drivers) so install a driver - reboot.
Make sure that it is installed and repeat if necessary.Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
SCANNER - check manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using
the above methods is preferable to ensure the latest drivers from the manufacturer of system
and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlIf you update the drivers manually, then it's a good idea to disable driver facilities
in the updates of Windows, which leaves on Windows updates, but it will not be installed
pilots who are generally older and cause problems. If updates provides a new
driver then hide it (right click on it) and then go get new ones manually if
you want.Stop Windows 7 to automatically install device drivers
http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/How to disable automatic driver Installation in Windows 7 / Vista
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for the)
Professional, comprehensive and Enterprise edition)
http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/===========================================
Refer to these discussions because many more excellent advice however remember to check
your antivirus, the main drivers and BIOS update programs and also to solve problems
with the first method cleanboot.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Update of Windows XP does not work, how do I stop the Office 07/10 updates?
For these last months, the web version of Windows Update does not work with XP. When you click on the button for Express or custom installation, the stalls of system looking for updates. So I had to put windows to warn me of updates instead of going on the site, but now it keeps wanting to download me updates for Office 2007 and 2010, but I do not own these products (I use Office 2003). I could not stop, even when I ticked the box does not warn me of those more. Finally I went to the site and found an option to disable Microsoft Update, which said I could always download the updates to the site, but I can't because he's trying to force me to re - download Microsoft Update.
What is going on? I don't like the new Microsoft Update as it keeps nagging me to download updates for the products that I have not yet owned. How can I update Windows XP only? This is very fustrating.
For these last months, the web version of Windows Update does not work with XP. When you click on the button for Express or custom installation, the stalls of system looking for updates. So I had to put windows to warn me of updates instead of going on the site, but now it keeps wanting to download me updates for Office 2007 and 2010, but I do not own these products (I use Office 2003). I could not stop, even when I ticked the box does not warn me of those more. Finally I went to the site and found an option to disable Microsoft Update, which said I could always download the updates to the site, but I can't because he's trying to force me to re - download Microsoft Update.
What is going on? I don't like the new Microsoft Update as it keeps nagging me to download updates for the products that I have not yet owned. How can I update Windows XP only? This is very fustrating.
Hi Steve,.
Follow these steps.
Go to Start | Settings | Control Panel and double click on automatic updates. I'll explain why later.
Then, tick the option at the bottom to turn off automatic updates, and then click apply/OK.
Then, go to start, run, copy and paste this command and click OK: services.msc
In the list of Services, you can see Background Intelligent Transfer Service ?
Here's a pix what he looks like.
If it is not listed, follow these steps to register the BITS service.
Open the Windows search tool, copy / paste the following text, and then click Search: qmgr.dll
Research should show this file in the following locations:
C:\Windows\System32
C:\WINDOWS\ServicePackFiles\i386
C:\WINDOWS\system32\bitsYou might only see qmgr.dll in C:\WINDOWS\system32 depending on your configuration.
Then, go to start, run and copy/paste: regsvr32 qmgr.dll and click OK
Do the same with this file: regsvr32 qmgrprxy.dll
Reboot the system and then copy / paste this command into the field run:
%windir%\System32\rundll32.exe setupapi, InstallHinfSection DefaultInstall 132 %windir%\inf\qmgr.infIf you are prompted to insert the Windows installation CD, ignore this and in the dialog below, replace the path C:\WINDOWS\ServicePackFiles\i386
If you could only see the file in C:\WINDOWS\system32, change the path to that instead.
Restart the PC and then go to the Services and you should be able to see BITS in the list.
Double click on it and then on the general tab, click the Start button to start the service manually. This is just a test to make sure that it works correctly.
If you get 2 error: cannot find the specified file, click on start, then run again and copy / paste the following command, and then click OK:
Tracking Add HKLM\SYSTEM\CurrentControlSet\Services\BITS\Parameters /v ServiceDll /t REG_EXPAND_SZ /d %windir%\System32\qmgr.dllReboot again and try once more to start the PIECES. It should work fine now, but in the unlikely case where it fails again, run the following command, and then press ENTER:
Reg add HKLM\SYSTEM\CurrentControlSet\Control\BackupRestore\FilesNotToBackupReboot once more and then do the following.
Go to this link and install the IE8 December Update:
http://www.Microsoft.com/en-GB/download/details.aspx?ID=41404If you use IE7, use this link instead:
http://www.Microsoft.com/en-GB/download/details.aspx?ID=41442Finally, go to the Windows Update site and you should be able to download normally.
If this is the case, re - enable automatic updates in Control Panel.
-
Windows Vista does not start upward, with success since the closure complete
Hello world
I actually had this problem for a long time, but I'm just now to a point where I'm ready to take a lead in fixing it.
I can't identify when it started, but Windows Vista does not start upward, with success of a full stop. He gets to the screen where, in general, the green bars will travel across the screen, but the green bars will not come. The screen looks dim and sits there, with the text of the copyright of Microsoft Corporation. So, after not having on the mound, I have to manually shut down the computer by holding down the power button. When I try to start again, told me to go through the Startup Repair tool. If I jump the repair, I just have to meet the same problem - a computer that will not go beyond the screen "green bar".
So, I do the Startup Repair, and told me what I do for the restoration of the system. Windows starts normally after the restoration.
Don't forget, this happens from a full stop. To remedy this, I just never completely shut down my computer. I left running and back just at the beginning of the day. The computer may start restart, it just may not start with a full stop.
Given the start of repair takes, literally, around 4 or 5 hours of full stops complete, accidental or power outages are a nightmare, I am obliged to wait 5 hours to get access to the computer. Fortunately, I have my laptop.
If someone has encountered this? I saw people talking about the loop of startup repair, but that's not the point, I have. I have yet to see any discussion of my specific problem.
Thanks in advance!
Hello
4-5 hours to do a startup repair is too long.
Often you get better results if you a using a DVD of Microsoft Vista startup repair.
Jose how to do a startup repair, etc. using a DVD of Vista from Microsoft
Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.
Here is the guide to repair Options using a Vista DVD from Microsoft.
If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.
http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/
Table of contents
- Overview of Windows Vista repair options
- How to perform an automatic repair of Windows Vista using Startup Repair
- Advanced Tools Overview
- Conclusion
If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.
Unfortunately, you have to buy it.
Here is a link to it:
http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/
See you soon.
-
Can't install or uninstall I get this msg. The Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team. HELP please.
Hello Monica and DuaneWolfe,.
Thanks for posting in the Microsoft Community. I understand that the Windows Installer does not work on the computer windows vista. I also noticed that there is another thread of yours, with the same question, and the thread was answered by Yaqub K August 30, 2012.Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information on how to to back up and restore the registry,http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
I suggest you to consult the help article mentioned in this thread and let us know the status of the issue.
Please avoid creating threads in duplicate on the same issue. You can reply to this thread if you need help and I'll be more than happy to help you. -
To connect to other computers on the network
Is it possible to connect to other computers on my network through the slate of 7 (laptop)?
Can take a look at Splashtop2 in the game store. Worked great in webOS, should be just as good in Android.
WyreNut
-
Windows 7 does not recognize external hard drive after the reboot
I just bought a WD external hard drive. I plugged in the USB port and automatically loaded everthing. I even registered the product. Then I was told that there was an update to the external hard drive. I went ahead and put to day and when my computer restarted to him alone is no longer recognizes WD external hard drive. I had another hard drive that I used where Windows 7 does not recognize it either? Is it some sort of security setting, I need to adjust on Windows 7 64 bit? Please notify.
Check if the hard drive is assigned to a drive letter in disk management.
Click Start, right click on computer
Click on management of
Expand disk management
Select your external hard drive if its posted here
Make a right click paths and change drive letter
Restart your computer, open the computer in the start menu and see if it shows then.
Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP
Maybe you are looking for
-
I have a device (driver) there appears the following message: Windows ha dejado device porque este is encontraron problemas. (Code 43) por ese reason no he could use mi tarjeta grafica g-force 8500 gt if alguien sabe como ese problema did to lo thank
-
Resizing by program "decimate the Array function.
Is it possible to resize programmatically 'decimate 1 matrix function D' or another way to do it (I hope that I am not missed something easy)? I need to decimate a table 1 d in 'X' number of rows according to the 'X' channels that have been read from
-
start the computer to start but stops at "failed to load the core file?
Original title: how to get Windows XP to boot my computer from starting when starts but stops at "failed to load the core file? When I try to start my computer, it stops at "cannot load the kernel." It will go no further. What is the solution?
-
cannot start or repair or install vista more
Because I can't see my post this morning, I'm him asking again: The machine comes with windows XP 64.Later I upgraded to Vista 64 Ultimate.Then I bought another HD and installed vista on the second HD.Then I installed another operating system on the
-
Howdy. I have a T720 with a PERC H810 configured as follows. All the disks are SATA external (custom made) enclosure. With two cables of SFF-8088 tuned on the disks. So you can not blink a light on a drive for ID. RAID 1 (OS): SATA 2 x 1 TB drives