WIndows 7 does not recognize my Canon EOS 60 d camera

Similar Questions

• Windows 7 does not recognize my Canon EOS 10 d when I plug it via USB - can not find the driver.

  When I plug in my camera the computer emits a sound that acknowledged the event, but can not find the driver for my Canon EOS 10 d digital camera.

  Canon has a compatible driver Windows 7 for your EOS 10 d...

  http://software.Canon-Europe.com/ Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

• Windows 7 will not recognize my Canon eos 300 d camera

  Ive been everywrer lookjing for a solutionRemember

  Alan Hi connect the camera and reboot the machine. Another option, you can use the SD card reader. See page 29 in this menu.

  http://www.cleaningdigitalcameras.com/PDF/EOSDR300DIM-en.PDF

  mohanad

• My computer windows 8 does not recognize my Canon's SELPHY PRINTER. What can I do?

  My new computer Windows 8 does not recognize my Canon SELPHY printer. What can I do?

  [Moved from comments]

  Hi Jan,

  1. What is the number of the Canon Selphy printer model?

  2. have you installed the drivers from the printer?

  3 have you tried to plug it into different USB ports?

  I understand that you are not able to connect printer Canon Selphy on Windows 8.

  Check if the device is detected in Device Manager.
  Follow these steps:
  a. on the desktop, press the Windows key + X , and then select Device Manager.
  b. expand Print Queues , and then right-click on the printer.
  c. Select Properties , and then check to see if the device works properly under device status.

  Is there a yellow triangle with an exclamation mark inside, then it indicates that there is a problem with the drivers.

  Follow these methods and check if that helps.

  Method 1: It is easier to connect to a printer on Windows 8.  Simply plug the USB cable from your printer to a USB port available on your computer.  If the computer is not find the printer, then plug it into another USB port and verify.

  Some older printers can require additional information to complete the installation, so connect you using the Advanced Printer Setup.
  Reference: install a printer in Windows 8

  Method 2: If there are no printer drivers available for the printer, then I suggest you to install the driver in compatibility mode.
  Install the drivers in compatibility mode for Windows 7.

  Follow this link and install the drivers for the printer.

  http://www.USA.Canon.com/Cusa/support

  Check out the following link to install the drivers in compatibility mode.

  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  Reference: What to do if Windows can't find a device
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Follow the steps and let us know the results.   If you have any other questions, please post, we will be happy to help you.

• Windows 8 does not recognize my Canon Vixia HV40 by fire wire. Help!

  Hey guys,.

  I'm having a problem with trying to capture video from my Canon Vixia HV40 and do it on Adobe Premiere Pro CS6.

  I think that the main problem is that my laptop (running Windows 8) does not even recognize my camera using a fire wire.

  I've linked download these drivers and nothing works. Can someone help me please?

  I use fire wire that turns a USB port, if that tells you anything.

  Hello

  Thanks for posting your question in the Microsoft Community forums.

  Let me try and help you with the problem.

  1. you try connecting the camera for the first time on your computer?

  2. have you made sure the Firewire cable is working correctly?

  3. What is the status of the camera in Device Manager when you connect?

  To open Device Manager, press the key Windows key + X and choose Device Manager.

  In Device Manager, check if the camera is recognized.

  If the camera is not recognized, you may need to check the issue by using a different firewire cable.

  I also suggest you to run the hardware troubleshooter and check if that helps.

  1. Point to the upper right of the screen and then move the pointer of the mouse to the bottom and click on search.

  2. Enter Troubleshooting in the search box, type or click Troubleshooting, and then click hardware and sound.

  3. Click hardware and devicesand follow the instructions on the screen.

  Let us know if it helps. If you have any other questions, we will be happy to help you.

• Windows Vista does not recognize my Canon powershot A710IS

  Recently tried to download photos for the first time in a few months and the USB or the SD card reader worked. The USB works for other things such as Chargers, printer, etc. Under Device Manager there is no option for a digital camera. My laptop does not recognize that anything has been plugged. Help, please!

  Recently tried to download photos for the first time in a few months and the USB or the SD card reader worked. The USB works for other things such as Chargers, printer, etc. Under Device Manager there is no option for a digital camera. My laptop does not recognize that anything has been plugged. Help, please!

  ===================================
  Maybe your AutoPlay settings need to be adjusted.

  Windows Vista - Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Windows Vista - AutoPlay: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

  Windows Vista - How to change the auto run settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  The following items may be worth a visit:

  (927836) a still digital camera is not recognized
  in Windows Vista or in Windows XP
  http://support.Microsoft.com/kb/927836/en-us

  Windows Vista: Using the scanner and Camera Installation Wizard
  http://grok.LSU.edu/article.aspx?articleid=10705

• Windows XP does not recognize my Canon ZR65 handycam.

  I have the 1394 cable connected to it. Was working fine until yesterday. Don't know why he's in trouble.

  Hello
   
  1. What is the error code displayed when you try to access the files from the camera?
   
  2. what hardware or software change has been performed on the computer before the question?
   
  Please follow the links below to solve the problem.
   
  Method 1
   
  How to solve problems of hardware and software drivers Windows XP
  
  http://support.Microsoft.com/kb/322205
   
  Method 2
   
  Start your computer in a clean boot to avoid conflicts with security and third-party software conflicts.
   
  How to configure Windows XP to start in a "clean boot" State
  
  http://support.Microsoft.com/kb/929135
   
  Note: Follow steps to configure Windows to use a normal start state of the above-mentioned article to start the computer in normal startup when you have completed the necessary troubleshooting.
   
  Method 3
   
  Reinstall the necessary drivers for the hardware.
   
  Install the latest version of the interface of the software / driver for m the site of hardware manufacturers.
   
  http://USA.Canon.com/Cusa/support/consumer/camcorders/minidv_camcorders/zr65mc#DriversAndSoftware
   
  I hope this helps.

• Windows 7 does not recognize scanner Canon DR - 2580C, even after the installation of the driver

  How can I fix it?

  Hello

  1. deal with any problem with other USB devices?
  2. have you tried to connect the scanner on a different USB Port?

  I suggest you to try the steps and check.

  Method 1: You can run the corner hardware store and check.

  Open the hardware and devices Troubleshooter:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:
  If the problem persists, you can try the procedure described in the link and check.

   

  Working with the scanner and Camera Installation Wizard
  http://Windows.Microsoft.com/en-us/Windows7/working-with-the-scanner-and-Camera-Installation-Wizard

  Method 3:
  If the problem persists, you can select the correct operating system version and try to install the drivers and software provided in the following link:

  http://www.USA.Canon.com/Cusa/support/consumer/scanners/document_scanners/imageformula_dr_2580c_compact_color_scanner#DriversAndSoftware

   

  If the problem persists I suggest you to contact Canon Support.
  http://www.Canon.com/support/

  I hope this information helps!

• CC of Photoshop (latest version) does not recognize my Canon EOS 500 d cr2 files

  The title says it all:

  Lightroom still fortunately matter and treats my cr2 files but CC Photoshop now tells me that it is not "the right kind of document.

  I guess that the last ACR plugin has been installed with the upgrade - suggestions?

  Thanks in advance - Alan

  Interesting.  Open Photoshop and go help > plugins > Camera RAW which should tell 9.1.1...   Although the version is theoretical considers a 500 d

  Check Bridge > preferences > File Associations > Canon Camera RAW and make sure that it points to Photoshop CC 2015.

  

  If still in trouble, reset the Bridge preferences.  You must do it the old way with bridge by pressing Ctrl Alt Shift (shift select Cmd) immediately after the start of bridge, but IME you must be quick with bridge _really_.  It took me three attempts before I could get the open dialogue box asking if I wanted to reset.

  If still in trouble, maybe reinstall Bridge, unless get us a better idea in this thread.

• Windows 7 does not recognize that a Canon canoscan 8000F is as a device when it is connected to the USB port.

  Windows 7 does not recognize that a Canon canoscan 8000F is as a device when it is connected to the USB port.  Tried unplugging, reboot & reconnect, in different orders, but the computer does not recognize there is.  Tried to install a European website for Canon driver: Scangear CS, 8000fvst8120a_xpen.exe, which is advertised as compatible with Windows 7.   But the installer does not work.

  Windows 7 Professional 32 bit.

  Hello Graboots,

  Thank you for your message.  You can plug your printer on another computer, in order to exclude the possibility that the problem lies in the printer?  You can try using a different cable, for this rule as well.  Since it is a question of recognition, we remove the external devices before software troubleshooting.  Do you get anything when you plug the printer (ie. a tinkle of connection)?  Please let us know, we are looking forward to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Windows7 does not recognize my Canon Powershot ELPH HS 300

  Windows7 does not recognize my Canon Powershot ELPH 300 HS, even though this is supposed to be a fully compatible device? The camera and scanner Wizard is not even burst for her... What should I do? I have a strange feeling that the Assistant camera and scanner never installed correctly and so I have absolutely no drivers of the device. Canon offers all the drivers for the camera as it is supposed to get all Windows 7automatically... I am in a real bind here. Help!

  I've fixed since the question. The camera worked well and even connected to my other windows 7 computer operated when I realized the difference between my two computers is that I had windows media player installed on the second, not the first. Apparently the .dll files suitable for the use of the camera, etc. are part of the windows media kit, and I just installed it on the computer and tadaaa first machine works!  Thanks for your time!

• Service Pack 3 for Windows XP does not recognize that it is connected to the USB ports. I get a notice that something has been plugged, but Windows fails to recognize regardless of the question.

  Service Pack 3 for Windows XP does not recognize that it is connected to the USB ports. I get a notice that something has been plugged, but Windows fails to recognize regardless of the question.

  Disconnect all USB storage.

  Run this tool by do right click and choose 'run as administrator '.

  Of course, all first extract it:

  http://www.Uwe-Sieber.de/files/drivecleanup.zip

  If your XP is 32 bits, use the Win32 folder.

  Reset.

  If you still can't find the drive, assign it a drive letter in disk management.

• Windows xp does not recognize the hp c6180 photosmart printer

  My windows xp does not recognize my hp c6180 photosmart printer

  Hello

  1. were you able to use the same printer without any problems before?
  2. don't you make changes on the computer before this problem?
  3. you receive an error message?

  See the following articles that may help you resolve this problem.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Resources for the resolution of the printer in Windows XP problems
  http://support.Microsoft.com/kb/308028

• Windows XP does not recognize the Sony Walkman NWZ-E344 media player Red

  original title: Sony Walkman NWZ-E344 Media Player Red

  My Windows XP does not recognize my Walkman when installed in USB. All other computers do, then only, assumes that I do not have good pilot.

  Hi brumbybrat,

   

  You must install the drivers for the walkman to recognize.

   

  More information is available in the following links:

   

  Is there a CD of installation for the Walkman® player?

   

  How to install manual and the Content Transfer software for the Walkman® player

• Windows 7 does not recognize my external screen.

  Windows 7 does not recognize my external screen.  I checked the driver and even of the went to the NVIDIA site and plugged my material for my graphics card ID to get the correct driver and yet, it does not recognize it!  So here's what I have right now since I've upgraded to Windows 7 Ultimate edition = Standard VGA graphics card.  If someone has a legitimate solution to this problem, feel free to comment! Thank you

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner