Windows 7 does not recognize usb 6221

Similar Questions

• Windows 7 does not recognize USB devices. Have no system access keyboard or mouse.

  Separated from this thread.

  It is a question.  I have a Windows 7 laptop.  It has three USB ports.  They always worked perfectly.  Today, one of them stopped: Port_ #0001.Hub_ #0002

  A sign of error says: "unrecognized usb device".  Troubleshooting, said that there no problem but under properties of the device, he says that Windows has turned off because it has detected a problem (Code 43).  I tried to plug in several things: camera, various readers flash, mouse, etc. They all used to work properly until today.  Now, it's just a dead port.

  Hi Seiberte,

  Thanks for posting the request in Microsoft Community Forums. I appreciate all the steps you tried to solve the problem.

  What is the brand and model of the computer?

  A device driver has notified the operating system that the device failed. This situation can occur if the peripheral equipment fails or if the device driver fails.

  To resolve this issue, follow these steps.

  1. To open Device Manager, click Start, click files, and research programsand type Device Manager. A list of the available items will appear above the search box; Click on Device Manager. Device Manager opens with the name of your computer to the top and a list of the devices installed on your computer under the name of your computer.
  2. Locate the device in the list of devices, right-click on the device and then click Uninstall. When a warning message that you uninstall a device in your system, click OK. Device Manager uninstall the device.
  3. Right click on the name of your computer in the Device Manager, then click on Search the hardware changes. Device Manager scan your system and reinstall your device automatically.
  4. Right click on the device, and then click Properties. The general of the device, in the State of the device Properties dialog box tab, you should see the message this device does not work correctly.

  If the steps above do not solve problems with the device and the device is an external drive, such as an external hard drive or USB flash drive, use the icon of the taskbar to safely eject the device, and then disconnect the device from the computer. For devices that use AC power, unplug the unit from the wall outlet or the power strip, wait 30 seconds and then plug it in again. Turn on the switch of the device and then plug it into your computer. If the system includes a driver diskette, ensure that you have at hand to install device drivers; otherwise, Windows should automatically locate the appropriate drivers and install them.

  Referred to article:
  
  Code 43: Windows has stopped this device because it has reported problems
  http://TechNet.Microsoft.com/en-us/library/cc725873(v=WS.10).aspx

  For more information, see these articles.

  Error codes in the Device Manager in Windows

  http://support.Microsoft.com/kb/310123/en-us

  Hope this information helps. Response with status so that we can help you.

• Service Pack 3 for Windows XP does not recognize that it is connected to the USB ports. I get a notice that something has been plugged, but Windows fails to recognize regardless of the question.

  Service Pack 3 for Windows XP does not recognize that it is connected to the USB ports. I get a notice that something has been plugged, but Windows fails to recognize regardless of the question.

  Disconnect all USB storage.

  Run this tool by do right click and choose 'run as administrator '.

  Of course, all first extract it:

  http://www.Uwe-Sieber.de/files/drivecleanup.zip

  If your XP is 32 bits, use the Win32 folder.

  Reset.

  If you still can't find the drive, assign it a drive letter in disk management.

• Computer Windows Vista does not recognize the USB mouse

  Original title: does not recognize usb devices... Im trying to use the mouse... got a new mouse... still does not recognize it

  worked but stopped, got a new mouse and still does not recognize it. I really need it... help please

  Hello

  
  1. do you get an error message?
  2. would either not detected other USB devices in the same port?
  
  Method 1: perform the steps in the article mentioned below and check if the problem persists.
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices
  
  Method 2: run the Fixit and see if the problem is resolved.
  http://support.Microsoft.com/mats/hardware_device_problems/en-us
   
  Method 3: update the chipset drivers and see if the problem occurs.
  Note: you must contact the manufacturer of the computer to update the chipset driver.
  
  Hope this information helps.

• Windows 7 does not recognize that a Canon canoscan 8000F is as a device when it is connected to the USB port.

  Windows 7 does not recognize that a Canon canoscan 8000F is as a device when it is connected to the USB port.  Tried unplugging, reboot & reconnect, in different orders, but the computer does not recognize there is.  Tried to install a European website for Canon driver: Scangear CS, 8000fvst8120a_xpen.exe, which is advertised as compatible with Windows 7.   But the installer does not work.

  Windows 7 Professional 32 bit.

  Hello Graboots,

  Thank you for your message.  You can plug your printer on another computer, in order to exclude the possibility that the problem lies in the printer?  You can try using a different cable, for this rule as well.  Since it is a question of recognition, we remove the external devices before software troubleshooting.  Do you get anything when you plug the printer (ie. a tinkle of connection)?  Please let us know, we are looking forward to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Windows XP does not recognize the Sony Walkman NWZ-E344 media player Red

  original title: Sony Walkman NWZ-E344 Media Player Red

  My Windows XP does not recognize my Walkman when installed in USB. All other computers do, then only, assumes that I do not have good pilot.

  Hi brumbybrat,

   

  You must install the drivers for the walkman to recognize.

   

  More information is available in the following links:

   

  Is there a CD of installation for the Walkman® player?

   

  How to install manual and the Content Transfer software for the Walkman® player

• Windows Vista does not recognize my Ipod Touch

  Windows Vista does not recognize my Ipod at all. He even appears in Device Manager. I know that is not my USB cable because it is new, and it isn't my Ipod because it works on Mac computers. I just need someone with expertise to help me get my computer to recognize my Ipod so I can go back to enjoy my music.

  Hello

  MTP mode for WMP11 sync - mode MSC to treat the MP3 as a reader. So you have set up in the MTP.

  -----------------------------------------
  If necessary:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Make sure that Windows is updated appropriately that there have been several USB updates.

  1 check that the driver letters for them, for a player, if the drive of the default drive letter is changed, what is happening.
  Mine was h: I added a device that took H: and the player stopped. So I put it back to H: and the other
  device to J: and everything worked again. If necessary start - type in the area of research-> disk management find top
  -Right-click on it - RUN AS ADMIN

  Don't forget to remember the MP3 must be set to the PSG to sync with WMP, and meteorological service of Canada to copy and delete files
  and update the firmware.

  If no joy follow these steps:

  You may need a powered hub. (all the USB ports on your computer are not powered, often only 2)

  Try these:

  Make a Restore Point

  Control Panel - Device Manager - click in the empty area - VIEW - show hidden devices

  Here, your devices are the MP3 player.

  Now look everywhere EXCEPT the USB controllers for your devices (cannot be found) and if you find
  It RIGHT CLICK and UNINSTALL all.

  now go to the USB and UNINSTALL ALL controllers in the category, but the category itself.

  APPLY/OK

  RESET

  This refresh battery USB and hopefully it will allow the unit to install. (You may need a powered hub)

  Here is the similar procedure under XP, Vista is the same, except that we need clear specific devices, as appropriate.
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, as well as all USB devices that you previously used. Run Options and check the 1st three choices to see if one is there.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Windows 7 does not recognize my iphone

  After you download the photos on my iphone, windows 7 does not recognize my iphone. in other words when I open my computer the iphnoe isn't here; but in Panel, in devices and printers, it appears with unspecified Apple Mobile Device USB driver, in the form of a generic icon.

  When I run Auto Play in the search box; the iphone is there with the icon to the right, but there is no screen options menu. It behaves as if it were invisible.

  It is important to note that this started AFTER downloading the pictures for the first time. Until windows has always recognized my camera properly.

  Thanks in advance for any help.

  Here's your solution:

  iPhone or iPod is not correctly recognized by computer when USB drivers are not installed properly or are out of date
  http://support.Apple.com/kb/TS1538

  Follow all the methods in the order that they are listed. The above article helped a lot of people the question of fixing with iPod/iPhone not getting detected do not.

  See you soon! "That's all a pension chequer nights and days,"
  Where destiny with men for pieces plays;
  Here and there, mates and kills.

  In a world without walls and fences, who needs windows and doors? Life sucks! Getting used to!

• My Windows 7 does not recognize my external hard drive

  My Windows 7 does not recognize my Apacer AC203 external hard drive 640 GB. I test this drive on 2 laptops with Win7 and 1 PC with Win XP and on all computers of this it works fine without any problems.

  Help, please. Al3k5aNd4R.

  My problem is with the computer, no cell phone and I have solved.

  I use the extension cable USB to my PC desktop. When I swich hd directly to the computer, then hd works...

  I have the same problem on the computer of a work which is also usb extension cable and it also do not work. HD :)

  Thanx for you're both.

• Windows 7 does not recognize external hard drive after the reboot

  I just bought a WD external hard drive.  I plugged in the USB port and automatically loaded everthing.  I even registered the product.  Then I was told that there was an update to the external hard drive.  I went ahead and put to day and when my computer restarted to him alone is no longer recognizes WD external hard drive.  I had another hard drive that I used where Windows 7 does not recognize it either?  Is it some sort of security setting, I need to adjust on Windows 7 64 bit?  Please notify.

  Check if the hard drive is assigned to a drive letter in disk management.

  Click Start, right click on computer

  Click on management of

  Expand disk management

  Select your external hard drive if its posted here

  Make a right click paths and change drive letter

  Restart your computer, open the computer in the start menu and see if it shows then.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• My computer windows 8 does not recognize my Canon's SELPHY PRINTER. What can I do?

  My new computer Windows 8 does not recognize my Canon SELPHY printer. What can I do?

  [Moved from comments]

  Hi Jan,

  1. What is the number of the Canon Selphy printer model?

  2. have you installed the drivers from the printer?

  3 have you tried to plug it into different USB ports?

  I understand that you are not able to connect printer Canon Selphy on Windows 8.

  Check if the device is detected in Device Manager.
  Follow these steps:
  a. on the desktop, press the Windows key + X , and then select Device Manager.
  b. expand Print Queues , and then right-click on the printer.
  c. Select Properties , and then check to see if the device works properly under device status.

  Is there a yellow triangle with an exclamation mark inside, then it indicates that there is a problem with the drivers.

  Follow these methods and check if that helps.

  Method 1: It is easier to connect to a printer on Windows 8.  Simply plug the USB cable from your printer to a USB port available on your computer.  If the computer is not find the printer, then plug it into another USB port and verify.

  Some older printers can require additional information to complete the installation, so connect you using the Advanced Printer Setup.
  Reference: install a printer in Windows 8

  Method 2: If there are no printer drivers available for the printer, then I suggest you to install the driver in compatibility mode.
  Install the drivers in compatibility mode for Windows 7.

  Follow this link and install the drivers for the printer.

  http://www.USA.Canon.com/Cusa/support

  Check out the following link to install the drivers in compatibility mode.

  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  Reference: What to do if Windows can't find a device
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Follow the steps and let us know the results.   If you have any other questions, please post, we will be happy to help you.

• Qosmio F30 does not recognize USB devices

  My new Qosmio F30 does not recognize USB devices. Displays Device Manager USB ENHANCED CONTROLLER and ROOT HUB works fine, but the machine still wants to install each device but cannot. BIOS version seems to be V1.30. I tried the devices on other machines, and they work fine.
  Is there something that I missed?

  Hello

  Before your shot the beautiful F30 can you please say what OS you are using?
  Did you use the OS from the Toshiba restore CD?
  On this CD, all drivers must be preinstalled and you don t need to install no matter what chipsets or anything like that.

• Windows xp does not recognize the hp c6180 photosmart printer

  My windows xp does not recognize my hp c6180 photosmart printer

  Hello

  1. were you able to use the same printer without any problems before?
  2. don't you make changes on the computer before this problem?
  3. you receive an error message?

  See the following articles that may help you resolve this problem.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Resources for the resolution of the printer in Windows XP problems
  http://support.Microsoft.com/kb/308028

• Windows 7 does not recognize my external screen.

  Windows 7 does not recognize my external screen.  I checked the driver and even of the went to the NVIDIA site and plugged my material for my graphics card ID to get the correct driver and yet, it does not recognize it!  So here's what I have right now since I've upgraded to Windows 7 Ultimate edition = Standard VGA graphics card.  If someone has a legitimate solution to this problem, feel free to comment! Thank you

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 does not recognize my color and barnes noble nook

  Windows 7 does not recognize my color and barnes noble nook.  It recognizes my external WD hard drive, but when I plug my nook, plug-and-play do not come and tell me that he has found a new device.

  How can I solve this problem?

  Angi

  ______________________

  My personal website:
  Absolutely of Angi
  http://absolutelyangi.com
  _________________________

  Dell Inspiron 530
  OS version: Microsoft Windows 7 Home Premium, Service Pack 1, 32-bit
  Processor: Intel (r) Core (TM) 2 CPU Quad Q6600 @ 2.40 GHz, x 64 family 6
  Model 15 Stepping 11 processor Count: 4
  RAM: Mb 3061
  Graphics card: Intel (r) G33/G31 Express Chipset Family, 256 MB
  Hard disks: C: Total - Mo 476929, Free - Mo 349361;
  Total I: - Mo 476937, Free - Mo 363385;
  Motherboard: Dell Inc., 0FM586, CN736048B800IW.
  Antivirus: Kaspersky Internet Security 2011 - 11.0.2.556

  Look at this thread, third substantive post.

  http://bookclubs.barnesandnoble.com/T5/nook-technical-support/win-7-won-t-recognize-nook/m-p/694110/message-UID/694110#U694110