Windows 7 does not refresh the folder views

I have the following problem:
Windows 7 does not automatically refresh the folder view (until I have updated manually by pressing F5) after the following file operations:
Create/delete/rename/move files or folders

Final version of Windows 7 Professional, international English version. No upgrade, clean installation.

It seems to me that it is a delay in my case: if I wait about 30 seconds, the updating is done automatically. There are shared folders on volume.

I made the following points:
-removed IconCache - did not help
-Reset - folder views did not help
-off to the discovery network and file sharing - did not help
-Made a clean boot - did not help
-a ran sfc - not found any violation
-new user created account - did not help
-updated the BIOS with the latest version - did not help
-updated the VGA driver to the latest version - did not help
-disabled the indexing of files - did not help
-run Windows 7 Mode safe mode (without network): it seems that the problem does not occur

I could be satisfied with Windows 7, but this question is terribly boring cause I work with a large number of files per day.

Could someone help me?

I had the same problem recently.  Here's what I discovered, FWIW:

  • After reading all of the above, it seems that, at the base, this is related to the shell of the user of Windows interface and how he tries to 'reach out' to other systems.  Fixes disable the Windows Client, disabling home groups, disable sharing of files, etc.
  • I discovered that I have the problem that in some folders.  For example, if I try to create a folder in the my DOCUMENTS folder, the problem occurs, but if I create the folder in a random folder on drive C: (e.g.. C:\MyTest), no problem!
  • I discovered that the folder appears finally - it takes 30 seconds. By pressing F5, I was "rush" of the process.  It also sounds like a kind of thing network client timeout.

I wanted to start with the easiest, lowest impact.  It worked:

  • I opened the COMPUTER and removed a "network connection" that pointed to a server that is not currently available.

That solved the problem completely.

Dan Holme, Intelliem

Tags: Windows

Similar Questions

  • My itunes on windows 10 does not refresh to allow me to use my new iphone 7

    My iTunes on windows 10 does not refresh to allow me to use my new iPhone 7, I have loaded down the update several times but he gets halfway through the installation of the update then say there is a problem and UN-installs

    Follow the instructions by If you can't install or update iTunes for Windows - Apple Support

  • Windows 7 doesn't remember the folder views.

    original title: Windows 7 doesn't remember the folder views. Microsoft is pathetic.

    Once more, I find it quite pathetic that Microsoft Windows 7 as Vista, such as Windows XP and all other operating systems M$ has developed can not EVEN remember the layout for the records.

    What is THE POINT of having more customization options in solution for users to set, Explorer if your code Explorer STUPID don't even BOTHER to remember. Users bother to customize their desktops and file only to discover that their work is broken as soon as the PC restarts or in Windows 7 Decides to forget or to crush stuff in the registry.

    It is also pathetic that M$ has removed most of the "individual" customization of Windows XP folder now opt for a "point of view fits all approach!". (Ie the deletion of the folder option "View tab / remember this layout of records"). I can't decide if a file opening should have the "Navigation bar" to the left. Now, if a folder has the navigation bar, hey look, ALL MY FILES open with the navigation bar now! Yay! NOT.

    Even with this, HE has YET to forget every customization that you made to your files!

    Things going on in my head when I'm on Windows 7:

    Mmmm. I'd like my account to have this icon or bitmap image please. There we go, very nice. Reset. Mmmm. Why is he returned to show all the file type icons in this new folder. Oh God, worst yet! NOW ALL MY FILES ARE RETURNED TO THE DETAILS VIEW. B * llocks, I've spent hours a lot, a lot, a lot (over time) establishing this batch! Gee thanks to shake me more M$. You've obviously spent a lot of money and many hours asking your BETA users which would p * ss them off the most when you use Windows Explorer. Voice of tester beta geek: "uh Yes, I think I was very p * ssed if all of a sudden he returned for more details on all my folders in Explorer. Microsoft: "OK, we're going to take care to include that then...". "Everything what is p * ss you off." Geek: "Yes, while your at it, if the navigation bar appears on EVERY issue and doesn't even have a shortcut key, so I had to reach for my mouse and go to a menu rather than quickly display and hiding cases of need, which would probably be p * ss me off really bad." Microsoft: ' hey this is a great idea!

    Folder view settings should be remembered INDIVIDUALLY for the love of God, on a folder by folder basis.

    I think that the removal of this option, and becomes the fact that Microsoft have removed code rather that actually fixing the code first place is a sign of how pathetic software from Microsoft.

    I hope Apple start to develop their PC rather than just Apple Mac operating system sometime in the future.

    It will ultimately be the nail in the coffin for Micro$ and personally, I'll be happy to see the back of them.

    I'm a PC and I am upset that Microsoft Windows Explorer doesn't bother to remember how I presented my files.

    If you want to know what I'm talking about m $ look the Apple Mac operating system and copy what they do (you know, the usual).
    At least they seem to know what I'm talking about.

    If you think I'm the only one who is upset at this by the way: http://www.google.co.uk/#hl=en&source=hp&q=windows+7+remember+folder+settings&btnG=Google+Search&meta=&aq=0&oq=Windows+7+remember+folder&fp=a60718907b4ba39b

    21.5 million users would disagree with you.

    DESIRED EFFECT

    To have a folder and its subfolders all use the same view model AND having the view model to reflect the disposal of one of the folders.

    WHAT YOU NEED TO DO

    First, you must realize that Win7 treats these two very different applications:

    1. make subfolders use the same model from view as the parent folder.

    2 configure how a view model is laid out.

    My confusion is I thought that changing the layout of the folder parent by clicking on 'Apply to subfolders' it applies to the layout of the parent folder, but all it's means "all look to the model of display as well as the parent folder.

    Understand that when you say "optimize this folder for: * music *" IT IS NOT AUTOMATICALLY CHANGE THE LAYOUT of the folder! Only it it's a music folder (or general or images or other) and ALL TIME NOW ON the time the * music model is changed (via right click on any * music folder > organize menu > folder and search options > view tab > apply to records) THEN the layout PAGE ONLY will be updated.

    So unfortunately, Xaero_Payne solution by itself will result in the 'problem' that everyone here seems to have. You do BOTH steps to make it work. (I know it's easy to chatting about M$, but instead of pi$ $ in the wind at home, we can as well get into their heads and understand how to use what we have).

    STEP BY STEP

    You can do these two processes in any order, but I want to do such as this, because I can then more easily see changes. For the example below, I'll do their music files and I'll apply the Details view template.

    R process: make subfolders using same view model

    Right-click on the Parent folder that contains all of the subfolders > properties > Customize tab > check also apply... subfolders > select * music * (for this example) > apply then OK

    Process 1: Customize and apply the provision of fashion model music

    Find or create a folder you want to use the view model.

    Select them * details * view (or list, large icons, etc.) and then customize the layout as you wish. Add new desired columns and rearrange them as you like.

    Organize the menu > folder options and research > display tab > apply to records. THIS MAY BE THE MOST IMPORTANT OF THIS PROCESS because otherwise he doesn't know you want ALL the * music * files to be like this.

  • Windows 8 does not see the hard drive on the Satellite A200

    Windows 8 does not see the hard drive on the A200.
    How to install it?

    S strange Windows 8 should already contain the HARD drive controller driver to recognize the HARD drive during installation.
    The HARD drive is visible in the BIOS?

    Do you use the original disc from Microsoft of Windows 8?

  • Satellite L30-105 (PSL33E) Windows Vista does not see the DVD - ram UJ-850 s

    Hello

    I have a Satellite L30-105 (PSL33E) with windows Vista. Windows Vista does not recognize the DVD - ram. BIOS recognize DVD-ram. I tried to download the drivers for the DVD-ram, but they are not on the side of Toshiba.

    Who can help me to get the right driver or learn more? Problems with the carpet * a DVD-ram uj-850 s ATA device and windows Vista.

    Hello

    The CD/DVD drive needs no special drivers!
    Vista includes a Microsoft driver that works with all CURIOUS s (CD/DVD drives)

    Simply said, the Vista should recognize the drive without any problems.

    A few questions; did you get any error messages? What is the status of Device Manager? Do you see yellow exclamation points?

    There is an old way to correct a similar drive problem. It worked on XP then try it on Vista OS.
    It of necessary to update the registry entry
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    1. click on the start menu.
    2. If it is a Vista machine in the search box type regedit without quotes.
    3. look for the registry key mentioned above.
    4. in the right panel you'll see something along the lines of UpperFilter and UpperFilter you want to click on each key filter and tap on delete. Click Yes when asked to confirm if you want to delete the key.
    5. restart Windows.
    6 let me know if it works.

  • Windows XP does not install the automatic updates.

    Original title: kopieerfout

    After several years, my laptop with Windows XP does not install the automatic updates, giving only a mistake:

    "

    ER is een doing opgetreden bij het van het bestand ntoskrnl.exe copying

    Kan het bestand niet naar doelmap copying.

    Everything works OK.

    Thanks for your help

    Everything works OK.

    It seems that it is not... Why Dutch? You use or have the corresponding language version installed?

    Free translation of message:

    "An error occurred during the copy of the file ntoskrnl.exe
    Cannot copy file to destination... »

    Please note that ntoskrnl.exe is a process in the cycle of the initial startup on your computer program.

    Try to load your "last known good configuration".

    The issue is also known to be caused by a short circuit in the ground cable into the keyboard cable. Make sure that it is not the cause of your error by replacing the keyboard with another keyboard or just disconnect the keyboard from the computer. You can also look at your function "Add or remove programs" If KB2686509 <> http://support.microsoft.com/kb/2686509 > is installed.  Install manually if it is not.

    If the above doesn't help, try using the Sfc.exe tool - see here > http://support.microsoft.com/kb/310747

    Or run the Chkdsk tool - see here > http://support.microsoft.com/kb/315265

    If still no luck, you may need to restore the file ntoskrnl. exe as follows:

    1 - insert the Microsoft Windows XP CD. Note: If you have a recovery CD or a restore CD and not a Microsoft Windows XP CD is probably the procedure below does not solve your problem.

    2 - restart the computer and that the computer starts, you should see a message press any key to boot from the CD. When you see this message press any key.

    3. - in the Microsoft Windows XP setup menu, press the R key to enter the recovery console.

    4 - Select the operating system you want to set and enter the administrator password.

    5 - type expand d:\i386\ntoskrnl.ex_ c:\windows\system32

    6. - you will be asked if you want to overwrite the file, type Y and press enter to replace the file.

    7 - type exit to restart the computer.

    Hope this helps - good luck!

  • Windows Messaging does not mask the images in emails after installing ie9

    I have Windows Mail to block images in my emails, but that after the installation Internet Explorer9 windows mail does not block the images in my emails even if the parameters are always the same. I had to uninstall ie9 for this reason, except that ie9 seems to work. Vista Home Premium SP2.

    Stringy salvation,

    Try to upgrade to windows live mail 2011 and check if it works with IE9.
    Maybe just the problem of the software with Windows mail.

    http://explore.live.com/Windows-Live-Mail?OS=other

  • After you install a second WD 1 TB my book drive, Windows Explorer does not see the new drive.

    Original title: Signature Collision?

    I'm having hard to the installation of a second external drive. I use Windows 7 Ultimate RC. There was a WD 1 TB drive My Book already installed - healthy and works very well. The problem occurred after installing a second WD 1 TB my book reader. I followed all the instructions, pluuging the drive to a USB hub. Windows found the disk, installed drivers and reported the new drive ready for use.

    Windows Explorer does not see the new drive. Devices and printers shows 2 external drives from WD. Disk Management shows as 2 drives, but the second disk is offline because of a 'Signature' Collision

    Each player works very well if it's the only drive plugged in. "Eject My Book" does not work because a program (or more) are to use the player in the background (Windows or Norton).

    I installed the latest firmware and I'm still having this problem. I've been emailing WD with this problem and they are running out of ideas.

    Can anyone help?
    Thank you
    Comatose13

    Hello Comatose13,

    There is an old article of KB in Windows XP that has been recently updated with additional measures to solve this kind of problem. The KB covers Windows XP, Windows Vista and Windows 7 with step by step methods. See if that helps.

    http://support.Microsoft.com/kb/330140

    Bobby

  • LG C500-G. AEE5GE1 with Windows 7 home prem OA MEA have been formatted. But despite giving the product key and Windows registry does not recognize the activation. Help, please

    LG C500-G. AEE5GE1 with Windows 7 home prem OA MEA have been formatted. But despite giving the product key and Windows registry does not recognize the activation. Help, please

    Name of the operating system Microsoft Windows 7 Home Premium

    Version 6.1.7601 Service Pack 1 Build 7601

    Manufacturer of operating system Microsoft Corporation

    System name HANDSOME-PC

    System manufacturer LG Electronics

    System model C500.-g. AEE5GE1

    System Type X 86-based PC

    Processor Intel (r) Core i3 CPU M 390 @ 2.67 GHz, 2666 Mhz, 2 Lossnay, 4 logical processors

    H46YSF00 Version/Date of BIOS American Megatrends Inc., July 2, 10

    Product key:

    X 16-96084

    CONCERNING

    TUESDAY BIOJY

    Have you tried to restart by phone?

    How to activate Windows 7 manually (activate by phone)
     
    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.
     
    http://support.Microsoft.com/kb/950929/en-us

  • I use a database program in a number of previous versions of windows and windows 7 does not allow the program to launch denial of service.

    Application of program compatibility does not start

    I use a database program in a number of previous versions of windows and windows 7 does not allow the program to launch denial of service.  What gives?

    If you have Windows 7 64 bit without BACK program can run because there is no 16-bit subsystem to run it.

    Try dosbox http://www.dosbox.com/. If that won't work your program, you'll need either a new database or run the BACK or on a 32-bit version of Windows in a virtual machine like VirtualBox https://www.virtualbox.org/.

  • Windows 7 does not open the windows in the taskbar. The content seems to be displayed off the screen

    Windows 7 does not open the windows in the taskbar. The content seems to be displayed off the screen. It started after the uninstall of Registry Mechanic and PC Tools, but this cannot be bound. IE 9 seems to be particularly affected. So do not display all of the windows that show on the taskbar.

    Use the Windows logo key & left arrow several times for each windows application through their positions until they appear on the screen.

    This problem is normally reported after someone used an external monitor as the applications try to open in the same position they had when they were last open - so if there was an external monitor last time now disconnected, they will try to open it in the middle of nowhere.

    I know not, or the other tools that you mention, but if they are registry cleaners then they could also affect other parts of your system.

  • Windows 8 does not support the prolific usb to serial driver

    Windows 8 does not support the prolific usb to serial driver
    What is the solution?
    We want to use windows 8, but because of this driver issue, we do not buy windows 8

    Windows 8 does not support the prolific usb to serial driver
    What is the solution?
    We want to use windows 8, but because of this driver issue, we do not buy windows 8

    Understand when the manufacturer of the hardware device will provide you with the drivers for the hardware you want to use on the operating system you want to use.  If they aren't - so there you go.

  • Install Windows 8 does not recognize the system drive

    I built a new machine (chart below). Since this is a new machine and not an upgrade, I bought Win 8 Pro 64 bit OEM to do a clean install. The SSD is my system disk that Windows 8 will be installed. Four data drives are mirrored, two for the other two. Construction went perfectly. The BIOS recognizes all six disks: 1 SSD, 4 HDD, 1 DVD.

    Insert and boot the disk of Windows 8. Accept the EULA, enter the product key. Arriving at the page "Where do you want to install Windows?", only four hard disks are listed. The SSD (installation to go) is not found by Win 8. ??? I tried to change ports SATA, cables, power supply - no difference. For each new change of hardware, the BIOS still sees everything. This isn't a hardware problem.

    The question remains: why the installation of Windows 8 does not recognize the SSD drive. All five disks are on AHCI. I'm not in RAID.

    I spoke with crucial technical support of all (manufacturer of the SSD). They were also surprised that the drive does not appear in the list.

    Does anyone have a solution? I spent all the money on hardware, as well as the new version of Windows and I cannot install it.

    This is the real kick in the teeth: Microsoft won't support me. The OEM of Windows 8 version is the same as manufacturers, such as Dell or HP. Support told me I had the support of the manufacturer. HA! I am the manufacturer. Either that or upgrade from an earlier version of Windows. This means that any that a new construction machine will get ZERO assumption of Microsoft. All just great.

    Thank you in advance for any assistance.

    Windows 8 Pro 64-bit (full version) - OEM
    Intel Core i5 - 3570K
    Card mother GIGABYTE GA-Z77X-UD5H
    Crucial Ballistix 2 x 8 GB DDR3 1600
    Crucial M4 2.5 "128 GB SSD (system disk)
    WD Green WD30EZRX x 4 (data readers) 3 TB drive
    Rosewill Challenger-U3 ATX Mid Tower Case
    SeaSonic M12II 620W 620 Bronze PSU
    ASUS DVD writer

    The DSS must be LOW LEVEL FORMATE.

    Once, there may be no other [HDDs] not connected to the SATA ports.

    Install Windows 8 Pro now.

    [Edit] Can someone please mark this as answered? I can't because I posted the question. Thank you.

  • Bridge does not refresh the thumbnails after changes in ACR.

    Bridge does not refresh the thumbnails after changes in ACR. Cultures made in ACR do not show more. I think it started after new ACR update. I have the last bridge and ACR and Photoshop.

    I thought about it. I have reset the settings of the bridge by pressing Command-Option-shift and then started bridge on my Mac. I lost my sight, I got but should display what I want to see again. But it solved the problem of the bridge not updated after modified ACR.

  • Illustrator do not open the folder view .ai files

    Having a lot of problems with Illustrator CC2015. Running Windows 9. When I double-click on files .ai or .eps from the folder view, Windows does not know how to open the file and does not even list Illustrator as an option when I try 'open with... '. »

    The only way I can open an Illustrator file is to use the file > open in Illustrator.


    Thank you.

    John,

    I think that it is perhaps a matter of definition of the operating system file association.

Maybe you are looking for

  • How can I keep albums of music forever?

    I'm kind of thinking that I want to save a little money by keeping these pieces forever. I buy like 200-$300 worth of music on my new iPhone 7, but keep the piece on for many years, from now on, that 50 years later, when I am in my 80 s. transfers mu

  • WNDR 4300 loses 2.4 GHz Radio daily

    I bought a router of 4300 in November 2013. Shortly after the purchase I had to reboot the router on a daily basis to maintain the wireless operation. Technical support provided a new update of the firmware which solved the problem. Fast forward to D

  • Install XP Probook 1 440

    Hello I need to install win XP on a 440 G 1 probook, but I can´t to disable the AHCI option in order to configure correctly to the new installation of win XP, can anyone help me with this? is there a chance to "unlock" this BIOS option or simply an o

  • connect an IR receiver to a computer from hp h8 - 1360t

    How to connect a plugin infrared receiver type laptop hp h8 - 1360t?

  • Help! Cannot connect camera Linksys

    Hello My camera works very well, my TZO set up was OK, etc... All of a sudden, I have logged on to the page of the camera and made some changes, to save the changes. Now I'll get my login page camera via the web and just http://xxxxx.linksys-cam.com