Windows 7 does not start after update

Similar Questions

• Windows Vista does not start after installing Linux OS

  original title: Windows Vista does not start after the installation of the Linux OS... Help!

  I installed Fedora 10 Red Hat Linux on my HP laptop and now each time it powers on, I can't do vista windows at startup.  Goes directly into Linux.

  I need to get back to normal.  Any help would be appreciated.

  I installed Fedora 10 Red Hat Linux on my HP laptop and now each time it powers on, I can't do vista windows at startup.  Goes directly into Linux.

  I need to get back to normal.  Any help would be appreciated.

  Hey Oscar Jose

  Download the correct ISO file and make a disk bootable from the link below

  Then use the Startup Repair option when you start from

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  or at startup press F11 to start the process of restoration of hp and see if you can reinstall vista from the recovery partition and place your machine, back to the way you bought

  warning you all data loss and 3 third-party programs that you have installed unless there is a non-destructive option in your hp recovery options

  Thirdly try to ask in a fedora forum to solve the problem, he has caused

  http://fedoraproject.org/

  Walter, the time zone traveller

• Photoshop does not start after update CC 2015 and I can't install new applications... What can I do?

  Photoshop does not start after update CC 2015 and I can't install new applications... What can I do?

  If you leave CC 2015 Installer remove older versions of Photoshop you can re - install older versions using the creative Cloud Desktop application or through direct downloads, you can install.

  Direct download links of Adobe CC 2014: 2014 creative cloud release | ProDesignTools

  Download new Adobe CC trials: direct links (no Assistant Manager) | ProDesignTools

  Download Creative Suite 6 applications

• Windows 7 does not start after reboot.

  I did a fresh install of windows 7 ultimate. Setup was good, he began, updated, installed some drivers and software, tried to reload and bad news. Restarting stopped with a white screen where the startup screen should be. I turn off the cpu and no problems at windows startup. I tried several times and no luck. If the restart from the menu start, it stops at the empty screen. "I seek answers and possibly other charges was installing, disabled all updates and disconnected all the printers, speakers, etc." and again not luck. After that first start and the processor does not start after a reboot. It stays on with a blank screen and no response to keyboard... Help, please...

  I corrected this easy on my HP 7100

  Go to management, records and defined as being active, then fixed, make a right click on the partition with windows on them might have to boot windows disk and choose repair option 2 times I found on a model of friends. Anyway, problem fixed, now able to restart (warm start)

• Windows 7 does not stop after updates

  My computer will not stop after you install updates. What is the best way to solve the problem?

  Thank you
  Cam1956

  Hi cam1956,

  The updates take time depending on the size of the file. If the update has hung so I suggest you hard reboot the computer and see if you can boot to the desktop. If you can boot to the desktop and then the updates are not installed will appear and which will be installed during the next update.

  Run the troubleshooter in Windows 7 for Windows Update turn when starting the computer on the desk, and perhaps that should take care of the updates. Install updates by selecting two to both as the updates and see update is actually causing the problem.

  Once you have identified the update that causes the problem, you can access the link below and install the updates manually.

  http://support.Microsoft.com/default.aspx/GP/downloadover/en-AU#TAB0

  If you know the updates that must be installed, you can manually enter the KB update in the search bar the link to download the update manually.

  If the computer does not start on the desktop, then I suggest you to start safe mode and see if you can boot to the desktop. If you are in the office, do a system restore which will take the computer to a time where it was working fine and then start to install the updates manually as suggested above.

  Go to the link below for the procedure to start in Safe Mode and system restore.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Let us know if the problem is not resolved or for any other help.

  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• ColdFusion service does not start after update 12

  Hello

  I'm running CF10 on Windows 2008 R2 server.

  Today I applied the update patch 12 to my server Coldfusion10 installation and now 10 Coldfusion Application Server does not start.

  After installation I ran configuration of the Web server, such as recommended. Now, when I start from server manager concole I get an error Windows cannot start Coldfusion 10 application server...

  When I start the Coldfusion Administrator I get page with:

  Service temporary unavailable!

  The server is temporarily unable to process your request due to downtime or maintenance capacity problems. Please try again later.

  Jakarta/ISAPI/isapi_redirector/1.2.32)

  I downloaded the patch directly from this http://helpx.adobe.com/coldfusion/kb/coldfusion-10-update-12.html page after update running administrator and download failed several times.

  I restarted the server box, but it did not help.

  Any ideas?

  Thank you

  CF10 reinstalled, now works

• every night does not start after update

  Win 7 x 64
  42.0A1 every night
  Does not start in normal or safe mode after update. Tried - safe-mode and shift method.

  Last crash Crash ID ID: bp-2bd17147-3a07-458b-9c89-4a37e2150718 doesn't mean anything to me.

  I can't put up with these accidents more. I worked on it for over 2 hours today.

  Please, someone help quickly.

  Hi rob86, every night is an early pre-release version where instabilities are expected. If you want to have a more stable environment, please use another channel: https://www.mozilla.org/firefox/channel/#firefox

• HP 15-af131dx: computer HP laptop does not start after update AMD video drivers

  Hello, my laptop HP 15-af131dx would not start after I have updated to the latest video drivers from AMD. After update, my phone was really slow, so I decided to restart it. When I tried to start up, most of the time, she would get to the windows logo with the symbol of loading under it and crashed. Sometimes arise windows recovery, but using it would only make it appear an error message. After a few tries, I was able to boot into windows safe mode and restore my video drivers. This corrects the problem, but I would like to know why this is happening and if the update of my video drivers by importing.

  . Hi @HPlaptop5,
  
  I hope you enjoy your visit to the HP's Support Forums. I understand that you have a problem with video drivers. I'll be happy to help you.

  You can also find your drivers to support.hp.com.

  The latest HP driver released was Version 15.201.1101.0 Rev.A release: January 29, 2016.

  I do not update my driver unless I have a video problem.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• computer does not start after update

  what computer starts without updates without problems.
  When the computer starts after a update it does not start and goes into the Startup Repair. after repair, I check: diagnosis and repair of the details:
  the root cause of watch - start criticalfile c:\ntoskrnl.exe is corrupt. with a 0xa error code

  can I fix it myself?

  horticulturist,
  Did you run the System File Checker?  If so, what were the results?  If you haven't done so already, you will need to run (sfc/scannow) so that it can check your system files for all questions.  Also this happens after any update is installed, or only the current links that are pending?  I suggest try to install an update at a time and see if you are able to get the updates installed or not.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows XP does not start after the installation of 3 GB of RAM. Will start with only 2 GB or less.

  I installed the new RAM on my desktop Compaq EVO D500.  Everything was working fine until 2 GB.  When I tried to install no matter what the computer does not start.  Specifications of the computer say maximum RAM is 3 GB.  All the memory and are good because I swapped taken in all the combinations possible and memory.  Any ideas. gknapp_ny

  If their were any memory related settings that had to be changed I would have no idea how do.  I had initially 512 MB of RAM (256-2 sticks).  I added a stick of 1 GB aditional third availabel taking and all went well.  Then I had two more identical 1 GB sticks and added them one at a time.  With 2 GB without problem.  But with the third stick of 1 GB that I couldn't start - I just beeps. I swapped one of the sticks of 1 GB for an old 256 MB and still no start just beeps.  When I run 2 GB everything is fine.  The BIOS recognizes the 2 GB of RAM. gknapp_ny

  Sounds as if your BIOS will not identify no matter what says the spec, 3 GB.

  It seems as if you may need a BIOS update in order to recognize the 3 GB of RAM - especially if it is a very old Compaq Evo D500.  See the "Improvements" tab to the page linked below.

  See http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=96295&swItem=PSG_I15378-37635&prodNameId=97121&swEnvOID=1093&swLang=13&taskId=135&mode=3

  Note that the patch on the link above is for models Evo D500 "with a ROM family 686Y2."  Read the "Release Notes" on this page to determine if your machine is one of those and if so, see "Instructions of Installation" to install the upgrade.  If your D500 is a laptop, you should Flash the ROM ONLY (i.e., update the BIOS level) when the computer is plugged - loss of power during this process can potentially cause irreparable harm to the computer.

• SW2 does not start after update

  Hope someone can help.

  I've updated my SW2 yesterday and everything seemed fine, but now when it connected to my phone the SW2 kept rebooting.

  I tried to turn it off, and now it does not start at all I just get 5 vertical bars on the screen. She is completely loaded and not recognized by the PC.

  I tried pressing the power button for at least 30 seconds - the SW2 turns but will not start when turned back on. I tried to relight both plugged and unplugged the computer with my phone is totally turned off so no possibility of what he's trying to connect to my phone while commissioning.

  Finally, everything seems to be ok atm.

  Steps to solve were

  -Disable the twinning of the phone (this allows the watch start)

  -Reset the settings of the watch watch

  -Uninstall sw2 connect app on phone

  -Restart the phone

  -Re-install smartwatch 2 SW2 on play store

  -Reconnect phone watch

  If you are still having problems uninstalling repeat but uninstall the applications that connect to the watch as well as the removal of the sw2 connect app

• Lightroom 5.5 CC does not start after update

  Hello

  I used the creative cloud to download all new 2014 updates LR 5 was an update.  All downloads and installations reported successfully.  I opened PS CC 2014 and he launched and loaded correctly.  However, LR 5 launches the screen flash for about 2 seconds, but does not start.  I try to go to Cloud creative to download and reinstall, but LR 5 as it is installed and won't let me not re - download and install.  I also tried to pass on the new adobe creative cloud site and tried to download it, but it is comes up with a message that the link requires a launch program... have no idea what happened to the program.  Totally baffled with this new cloud set up!  Your help is greatly appreciated.

  Dennis

  I have the subscription of photography - both LR and Psalm

  I contacted just supported and the mast has been resolved. Here's what we did:

  Remove the LR5 of the Applications (Macbook Pro) folder application

  Download and install the new LR5.5 software via the web on adobe.com

  Start LR (it worked)

  Sign out of Adobe CC app

  Connect to Adobe CC app and he finds LR and scored is installed.

• Photoshop CC 2015 does not start after update

  After update from yesterday, I get the error message "the operation could not be completed" when I try to run Photoshop.

  Any ideas?

  Thanks, Dirk

  Jitendra Hello,

  Thanks for these suggestions, but they don't work - however, I found a discussion, which seemed to have solved the problem or at least found the source of the problem. For your information, it's here: Photoshop CC 2015 do not launch after update

  Kind regards

  Dirk

• Windows 7 does not start after the installation of updates - sounds familiar!

  Apparently, I have another system that no longer starts after you install an update to Windows 7. New kick computer _ I have to disable the automatic update of windows. Twice I had to restore the system in the first week because he hung up after the installation of updates for windows 7. I have no idea what update is the cause of the problem.

  Essentially, start the screen goes black with the cursor blinking in the upper left corner of the screen. The only way out is to restore the system.

  Does anyone know what update is the culpret? HP support has no idea. Their only solution was to update windows 7 to 'never download an update from windows '. It is a terrible thing to be underestimated solution.

  Here's the resolution...

  I installed all the updates except KB2284742 954430, 973688 and 971033. So I decided to install these 1 4 at a time in the order shown. I installed successfully 228472 and 954430 and 973688 disappeared from the list of available updates. So I installed 971033 and it installed successfully and I was still able to restart.

  My conclusion is that there is a conflict between the first 3 updates when they are installed at the same time.

  Now my system is up to date with all windows updates and I'm able to restart without any problems!

  Close this message.

• Windows XP does not start after Windows updates

  Original title: recent Windows update for xp

  As a result a my computer Windows xp, last Tuesday, my computer is now inoperative.  He was fine before this, but cannot get it to turn on.

  When I tried again today, a message came up saying Microsoft to apologize for the inconvenience, but Windows did not start successfully.  A recent hardware or software change might have caused this.
  What should I do now?

  Grandmother,

  If the options above do not, I suggest you use the Recovery Console to try to fix your Windows XP

  Here's HOW - there images, so it is easier to follow. Read the section on how to use it.

  Once you are connected to the Recovery Console, type the following command and press ENTER:

  CHKDSK/p

  There is a space between 'k' and ' / '.

  This may take a few minutes and the command can fix registry issues possible that occurred. This is based on the experience that I have used this on an old XP machine and it showed a message after the recovery that looks like this

  See you soon ~!