Windows 7 error: "Windows Explorer has stopped working" when you try to connect to network shares.
I recently installed Windows 7 Ultimate on my laptop - clean, no upgrade. It's in the CARDS and not a copy of the beta version. When I try to connect to a network share, I get an error. "Windows Explorer has stopped working". If I go to start > run and type in \\servername\users, I'm prompted credentials. I enter domainname\administrator, then the password, as soon as I get an error message indicating that "Windows Explorer has stopped working" then by «Windows Explorer restarts...» "and then refreshes the screen. If I open computer > network > Servername, I invite myself again for credentials, but get the same message. The name of username/password combo does not seem to make a difference.
An additional singularity, I went to control panel > "Backup of your computer", and when I was invited to a network location back up my system, I gave him the same set of location and network credential and the system have been successfully saved to the network drive.
Press Win Logo key + R, type: fsmgmt.msc
If so, open the credentials manager in Control Panel and look for an entry like your network logon. Delete who can clear up.
Mark L. Ferguson MS - MVP
Tags: Windows
Similar Questions
-
SE error message "Windows Explorer has stopped working" when you try to search for document files
Original title: C:\Windows\Microsoft.NET\Framework64\v2.0.50727
When I'm looking for my document folders all of a sudden, a window pops up saying: windows Explorer has stopped working, then it restarts my computer, I followed to DW20.exe and my friend told me to try and rename it but for some reason any he used to let me. This is a recurring problem and is extremely frustrating!
Please help meHello
Were there any changes (hardware or software) to the computer before the show?
Perform the steps from the link below and see if it helps.
Error: Windows Explorer has stopped working
Note 1 : when you perform the clean boot, then follow step 7 to reset the computer to start as usual after the boot process.
Note 2: Make a backup of all your data on an external drive before you perform an upgrade in-place, as this could result in loss of data.
Hope this information helps.
-
SE error message "Windows Explorer has stopped working" when you click on network and sharing Center
Original title: Windows Explorer has stopped working when I click on network and sharing and also...
Hello technical savvy people!
Windows Explorer stops working when I click on network and sharing, and also when I click on system.
-Otherwise, I rarely get this little automatic.
But when I do she translates these windows endangered; and then I can't find my connection to the local network, or my IP address,
nor know how my system!Can you suggest healings?
Thank you for your attention,
marlem388Hello
Were there any changes (hardware or software) to the computer before the show?
Perform the steps from the link below and see if it helps.
Error: Windows Explorer has stopped working
Hope this information helps.
-
Error "Windows explore has stopped working" when you open the file in my documents
Original title: opening a file in the folder my documents
Whenever I try to open a file in my documents folder, specifically a CV that I downloaded on a construction site. I get a message that windows Explorer has stopped working?
Hi dalintn,
1. What is the file format of the document?
2. are you able to open documents from other locations?
3. did you of recent changes on the computer?
Check if the similar problem persists when you access the document from any other location on the computer.
Method 1
This error message can occur if there is some system files corrupted on your computer. I suggest that you run a SFC scan, which would be a system file corrupt on the computer search and replace.
The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista installation CD.
For more information please visit the link below.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 2
If the previous step fails then I would suggest that you do clean boot and check.
To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See the link below to learn more about how to clean boot.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
(a) click Start, type msconfig in the search box and press ENTER.
(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
(c) under the general tab, click the Normal startup option, and then click OK.
(d) when you are prompted to restart the computer, click on restart.
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
installation of Windows services has stopped working when you try to install the software
Unable to install software.tried cmd method, nothing happens
Original title: installation of windows services has stopped working
Hello Mohit,
Welcome to the Microsoft Community Forums.
I understand that you have a problem with the Windows Installer service.
But I would like to know some more information on this issue to help you better.
(1) what is the full error message?
(2) what software are you trying to install?
(3) have you tried to install any other software?
(4) when you say, "tried cmd method" what exactly mean you?
In the meantime, please try to follow the following suggestions to solve the problem.
Method 1: First of all, try to follow the link below to troubleshoot the Windows Installer Service.
How to fix problems with the Windows service installNote: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.I hope this helps. Otherwise, feel free write us back and we will be happy to help you.
Thank you. -
host process for windows services has stopped working a problem caused the program to stop working correctly windows closes
Original title: host process for windows services has stopped working
See if you have rootkits. Run tddskiller, if it finds rootkits, select cure, wait for it to finish and then restart your computer
-
Driver.exe has stopped working when you try to play Driver.San Francisco.
I get the message DRIVER. EXE. Haven't STOPPED WORKING, when I try to play the game, Driver.San Francisco on my computer. Windows 7
Hello
1. what game do you play?
2. have you made any changes to the computer?
3. this problem occurs only with the particular game?
4. What is the exact error message you received?
Method 1:
I suggest you perform the clean boot and check.
Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.
Method 2:
I suggest you to see link and check.
"Display driver stopped responding and has recovered" error in Windows 7 or Windows Vista
http://support.Microsoft.com/kb/2665946
See also:
If the problem is related to Microsoft, I suggest you to see link and check.
Game hangs or quits unexpectedly
-
Only, I get this error when I try to uninstall/delete an application from my PC. Running Sfc/scannow and it found nothing wrong. Quick scans of Malwarebytes and MS Essentials is no malicious files, running a full scan of Malwarebytes.Please help, I need to uninstall something!---------------------------------------------------------------------Windows host process (Rundll32) has stopped workingSignature of the problem:Problem event name: APPCRASHApplication name: RunDll32.EXEApplication version: 6.1.7600.16385Application timestamp: 4a5bc637Fault Module name: StackHash_9629Fault Module Version: 6.1.7601.17725Timestamp of Module error: 4ec49b8fException code: c0000374Exception offset: 000ce6c3OS version: 6.1.7601.2.1.0.768.3Locale ID: 2057Information additional 1:9629More information 2: 9629b7be96a6d05c3ae74dcb4df31847Information additional 3:2716Additional information 4: 271690c76c60b0182163ae26acc5f429Read our privacy statement online:http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409If the online privacy statement is not available, please read our offline privacy statement:C:\Windows\system32\en-US\erofflps.txt
Hello
Method 1:
I suggest to set up the computer in a clean boot state, then try to uninstall the software.
How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7
http://support.Microsoft.com/kb/929135Note: After the boot minimum troubleshooting step, follow the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.
Method 2:
If the problem persists, I suggest you try the procedure described in the article and see if it helps.How to solve problems when you install or uninstall programs on a Windows computer
http://support.Microsoft.com/kb/2438651Hope this information helps. Answer the post with an up-to-date issue report to help you further.
-
Get an error 'internet service has stopped working"when you are connected to the internet
* Original title: my computer keeps do not stay online, I always get a message saying that the internet service has stopped working and it will constantly, I could make dionostics but in vain
My computer is not online, I get a message that says service is stopped, reconnection. I have DSL service and you run programs to detect a problem, but nothing is
Hello
1. which browser is installed on the computer?
2. What is the full error message?
3 is this a wired or wireless?
4. that all the troubleshooting steps have done?
5 have have there been recent changes made on the computer before the show?
I suggest you follow the methods provided below and update us with the results.
Note: If you are using internet explorer, follow the methods provided.
Method 1: Verify the problem by running Internet Explorer mode without modules.
Temporarily disable all add-ons to see if the modules are the origin of the problem.
To temporarily disable all add-ons:
a. click the Start button.
b. click on all programs, accessories, and click on system tools.
c. click on Internet Explorer (No Add-ons).
If the Internet Explorer (No Add-ons) mode works very well then an add-on may be causing the problem. You will need to re-enable each (process of elimination) in order to determine which one is causing the problem.
http://Windows.Microsoft.com/en-us/Windows7/Internet-Explorer-Add-ons-frequently-asked-questions
Method 2: Optimize Internet Explorer and check.
How to optimize Internet Explorer
http://support.Microsoft.com/kb/936213/no
Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
For more information, see the article and check.
Tips for solving problems when Internet Explorer hangs or stops working
http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-problems-with-Internet-Explorer
Why is my Internet connection so slow?
http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow
Windows wireless and wired network connection problems
Let us know if it helps!
-
Windows Media Player stops working when you try to view some AVI video files.
I recently updated my computer and this problem developed after the upgrade. I don't know if I'm missing a codec or what.
On some, but not all AVI video files when I try to view them with Windows Media Player (version 12.07601.17514), I get the following error Message:
"Windows Media Player has stopped working.
A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. »
I use Windows 7 (64-bit).
AVI video files causing a problem Windows Media Player are viewable by FinalMediaPlayer.
I recently updated my computer and this problem developed after the upgrade. I don't know if I'm missing a codec or what.
On some, but not all AVI video files when I try to view them with Windows Media Player (version 12.07601.17514), I get the following error Message:
"Windows Media Player has stopped working.
A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. »
I use Windows 7 (64-bit).
AVI video files causing a problem Windows Media Player are viewable by FinalMediaPlayer.
======================================
No guarantee, but it might be interesting to try to download
and install the following freeware codec pack:(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)Multimedia | ADVANCED Codecs for Windows 7 and 8
http://www.MajorGeeks.com/files/details/Win7codecs.htmlGood luck...
: -
SE charger of HEALTH professionals has stopped working when you try to install a game.
I have a Loader of HEALTH professionals has stopped working while he was trying to install some treasures from the deep by Oberon Games. I searched and found others have had the same problem with this error message. I found help for Vista users, but there is nothing for the support for Windows 7 users.
I am running Windows 7 Home Premium 64 bit on a B-311 HP 20 Pavilion with 4 GB of ram. When I first had this system, I had 8 Home Premium 64-bit Windows installed on it and the game installed without any problems.
Here are the details of the error message I get:
Signature of the problem:
Problem event name: APPCRASH
Application name: Start_Here.exe
Application version: 2.0.1.4712
Application timestamp: 4402d 429
Fault Module name: Start_Here.exe
Fault Module Version: 2.0.1.4712
Fault Module Timestamp: 4402d 429
Exception code: c0000005
Exception offset: 00003045
OS version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional information 1: 79ee
More information 2: 79ee8ce1c976216026f008da08a6a3a9
Additional information 3: c6a2
Additional information 4: c6a28a6a42863f9b270bcf8e85f99d62Read our privacy statement online:
http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409If the online privacy statement is not available, please read our offline privacy statement:
C:\Windows\system32\en-US\erofflps.txtI tried even to run the installation with Windows XP SP2 compatible mode set up option and you still get the same error message.
chk if the game is compatible from this link
http://www.Microsoft.com/en-in/Windows/compatibility/error/index
If not install it in compatibility mode and click on the link for more information.
http://Windows.Microsoft.com/en-us/Windows/make-older-programs-run#1TC=Windows-7
If you still have problems with the game contact he is a developer or ask their support for more info...
-
Organizer of 11 elements has stopped working when you try to change an album?
Anyone encountered this?
The only place where I had the problem is when you try to change an album. After that it stops working, items 11 just stops.
Operating system is Windows 7 Ultimate.
Thank you...
This problem has been all resolved with many tests - there ended up being a program called RoboForm (password remember program in the taskbar) has been walking on organizing PSE. I disabled RoboForm and everything worked, he turned back and organizer failed on the Album / Edit. I did at least a dozen times and each time the results were predictable - Organizer is broken when RoboForm was conducting and organizing worked when RoboForm has been turned off.
Thank you... Pete
-
"automatic update service has stopped working" when you try to install the software
I'm trying to install Canon Imagebrowser provided with my camera. Close program ends the installation process but cannot complete. I then get an error box saying Microsoft serivce Auto Update has stopped working and the installation does not complete. Have tried several times and have the same problem. This has happened with the software Imagebrowser - other software on the CD installed fine.
OK... I thought about it. Go to the link below and follow the instructions to manually install Imagebrowser. It worked for me!
Good luck... -
"Windows Explorer has stopped working" - when I close any window
When I close any window despite the installation of service pack 2 for windows vista home and windows Explorer 9? for weeks? McAffe is up-to-date and supported through bellsouth.
Hello
Use the clean boot method to see if that can help you to discover the cause of the people.
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems). You said that McAfee and that could be part of the issue.----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3Hope these helps.
-
Original title: I am trying to run a PED Basic on Windows 7, I am not able to access my creations on my hard drive. When I try to open the file, I get a MFC Application has quit job message. Any ideas? __
Window 7
1.06 based PED
Hello photoheiress,
Check the following:
1) go to Brother Web site and check you have the latest Windows 7 drivers/software for your Brother model.
(2) try to run in Compatibility Mode. If your Brother model is compatible with Windows XP, then choose XP or the brother Software was written for any operating system.
(3) when you install the setup.exe or .msi file, right click and select "run as Administrator".If please reply back and let us know if none of the suggestions helped solve your problem.
Sincerely,
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think
Maybe you are looking for
-
Why error invalid memory access loading newdev.dll
My wireless device is connected to a usb port. No problem. Any other usb devices that I connect to a usb port causes the error message in the title
-
Where can I find the download of Windows Vista Home Premium Service Pack 1?
I did a full restore in Win Vista Home Premium from recovery disks. When you set the computer, I enabled Windows Update before remembered me that I had to also download Vista Service Pack 1 and Service Pack 2. Windows Update had already downloaded
-
URGENT! How to download the JRE 6.0 BB
Hi all I want to download the JRE 6.0 BB, but I tried but not been able to find any link any link was broken. Please help me and give the link so I can download the JRE BB 6 Thank you
-
Windows Diagnostics policy service does not
Windows Diagnostics policy service does not Original title: Network wireless adapter NIC Ethernet network device
-
How can I block the outbound to a subnet?
I want to block all traffic to a subnet. Say, 12.34.56.x 255.255.255.0 What is a more simple/better way to do this? Thank you Jay