Windows 7 firewall blocks incoming remote desktop connection

Similar Questions

• Windows Media Center crashes under Remote Desktop connection after the installation of KB2592687

  When you view another computer (Win7 Pro for Win7 Pro) via the remote desktop connection, this (KB2592687) update causes Windows Media Center not start or leave immediately, in both cases briefly showing a popup that reads:

  Windows Media Center has stopped working

  Both computers have installed KB259687.  WMC works by connecting directly to each machine.  If KB259687 is uninstalled on the machine connected remotely via the remote desktop connection, you can run once again, WMC in the distance window.  Note the video is not available, but you are able to verify existing records, change the calendar, see the rack TV, etc. (everything as before).  Records on demand on the PC are working correctly, I had a crash the system (blue screen) apparently because of this.

  Note that there is no problem watching a WMC when using desktop remote connection to a Pro Win8 machine when connected to a machine, Win7 Pro.  WMC is installed on the machine Win8 Pro and is adjustable from inside the Desktop Login window on the Win7 Pro machine remotely.

  I had the same problem, but uninstalling the update didn't fix it for me.   I have studied and found that permissions for key reg key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\WinStations\Rdp-Tcp included not all permissions for the users group, just like the other subkeys.  Maybe the update of above RDP modified these permissions?  In any case, when I added for this key for users read permissions, shell new WMC would begin in an RDP session.  I also found this race the ehshell 'as administrator' would work under RDP, but this was not necessary in the past.

• Windows Microsoft Update KB 2509553 internet blocking and Remote Desktop connection.

  My computer is a client on a small business network.  Windows updates are made automatically from a server and deported to the customers.

  As indicated that I reduced to KB2509553 update which blocks connectivity network and internet.  Once I have uninstall everything works fine.  It's every night our automatic windows update on server causes this update to install again.  Every morning I have to go remove this update and restart the machine.

  I would like to know what needs to be fixed with this update for this update will not block the internet connectivity and network?

  Tip: Read the sections by vulnerability information http://www.microsoft.com/technet/security/bulletin/ms11-030.mspx (void)

  ~~~~

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Buying to meet problems installing Microsoft security updates also can visit the following page for assistance: https://consumersecuritysupport.microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

• Remote Desktop connection does not Windows 7 Home Premium computer connect

  Hi guys,.

  I regularly connect to computer Windows 2003 Server R2 of various computers via remote desktop without problem. However, I just got a brand new computer running Windows 7 Edition Home Premium and for some odd reason I can't connect to the Windows Server 2003 by using Remote Desktop connection. I tried to disable the firewall on both computers with no positive results. My DRC telling me that it cannot connect.
  Can someone give any idea why this computer refuses to connect? Y at - it no service apart from the DRC services that should be running and can I get a list and try to restart their? Is it possible to re - install Remote Desktop connection? Maybe a download for windows 7 because I find only one for Windows Vista & XP.
  Thank you
  Viclabs...

  Hello

  I suggest you to report this issue in support for Windows Server 2003 TechNet Forums: http://technet.microsoft.com/en-us/windowsserver/ff354964

  Thank you.

• Remote Desktop connection failed but successful ping

  I am trying to connect via RDC (Remote Desktop Connection) of the SOURCE to the DESTINATION.

  I welcomed the remote connections on the DESTINATION and added couple of users who are allowed to connect remotely.
  I can ping DESTINATION SOURCE successfully.

  None of the responses failed to control below SOURCE
  C:\ > ping-l 512 f - n 100

  Strange thing is that I can remote login from DESTINATION to SOURCE, but not vice versa.

  I don't remember making any additional settings to other machines that are connected to remote. Only one machine (the DESTINATION) to the question.

  Any thoughts are appreciated.

  Thank you
  Biausse.

  On the target computer, make sure that Port 3389 is not blocked by a firewall.  If you use Windows Firewall, go to the control panel Windows Firewall, check that "Don't allow Exceptions" is not checked in the "Général" tab, then click the 'Exceptions' tab and make sure there is a check mark next to "Remote Desktop".

  You can also ensure that a program is to accept incoming remote desktop connections to raise a command prompt (start-> Run-> "cmd") and entering the following command:
  netstat - year |    find "3389.
  If all goes well, you should see the following line returned:
  TCP 0.0.0.0:3389 0.0.0.0:0 LISTENING

  HTH,
  JW

• Cannot create the remote desktop connection in two different networks.

  Original title: Windows 7 PRO through internet Remote Desktop connection.

  Two windows 7 Machines Pro. They want to be able to connect to the main computer (Internet router) when they are away at their House on the other.

  It connects via DSL behind a router

  A modem connection cable Roadrunner

  The customer has upgraded to pro. Computers aren't workgroup and domain just PC. What would be the best way to have to allow them to connect to the router. I tried the port on the router, nothing helps.

  Hello

  Remote Desktop connection uses port 3389 in order to listen to the incoming connection.

  When done over the Internet, you will need to forward the port to the IP of the computer.

  Alas, a router can send a specific port only to a single computer.

  Since you have two computers, you must change the listening port for one of them to a different port number and transfer the new port to the IP Address of the computer.

  Let a computer uses the default port 3389.

  In the second computer, change the port to another port of your choice, http://support.microsoft.com/kb/306759/en-us

  Assign static IP to the computers (make sure that it is in the DHCP range).

  In the router open port 3389 to the IP address of the computer with the default setting.

  Open port you used for the second computer to its IP address.

  When you connect, if the connection is a connection by default, he would go to a single computer. When the connection is made with on the second track, he would go to the second computer.

  This page describes another remote program but it represents the principle more in detail,http://www.ezlan.net/vnc.html (towards the end of the page).

  Method to deal with the external IP address here, http://www.ezlan.net/myip.html

  Windows 7 RTD, http://windows.microsoft.com/en-US/windows7/allow-remote-desktop-connections-from-outside-your-home-network

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Through router remote desktop connection gets login screen, but the administrator is the only option (windows 7 pro)

  I have a new windows 7 pro system which has been configured to host a remote desktop connection.  There are 1 user account (active admin), the port number was changed from 3389 and I think that the firewall is disabled (it's Norton Internet Security and I tried to completely disable the firewall).

  When I established a remote connection from another computer on the same subnet, the client asks for login/password and the connection ends and goes directly to the screen of the user.

  This subnet has an internet connection via a firewall or router.  It has been configured to redirect incoming connections for the custom to the host port number.

  When I establish a remote connection from outside through the firewall I am invited to login/password, but the Welcome screen appears and the only options are administrator and other users.  Administrator is blocked for the account restrictions and using other users to type the login and the password does not work - it still fails on bad login/password.

  I've seen this problem described in other forums, but have not seen a solution - anyone got one?

  Thank you

  Hello
  I guess that its due to the settings.
  Check out this link. you might get a few steps.
  http://Windows.Microsoft.com/en-us/Windows-Vista/Remote-Desktop-connection-frequently-asked-questions

  Kind regards.

• Remote Desktop connection for XP Pro to a pc Windows 7

  I am trying to connect to a Windows 7 Pro pc using my Windows XP Pro computer.  I created the firewall for inbound and outbound rules to a specific port, set the port on the Terminal Server and upgraded the Remote Desktop Client in the XP box to 6.0.  However, I still can't connect to the Win7 pc unless I completely disable the firewall.  Could someone please give me a solution to this problem?

  Thank you
  Ebert1104

  Hello

  The firewall blocks the traffic, you probably does not correctly configured the ports and its opening.

  http://Windows.Microsoft.com/en-us/Windows7/Remote-Desktop-connection-frequently-asked-questions

  http://www.SevenForums.com/tutorials/3922-Remote-Desktop-connection-RDC-network.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Remote access Windows Server 2012 through internet with desktop connection

  Summer messing about with it for days and don't get no love.

  Try to connect with Windows 7 Ultimate edition to Windows Server 2012 Data Center version from outside my home network, Starbucks or McDonald's or my server at home.

  Tried all these steps found in this promising and useful article:

  http://Windows.Microsoft.com/en-us/Windows7/allow-remote-desktop-connections-from-outside-your-home-network

  1. Allow connections to the computer you want to access remotely. DONE - ADDED to THE SERVER AND NON-ADMIN ACCOUNT to RDP GROUP of ROLES, using network level authentication. Connection of Win 7, so this method of authentication should not be a problem, I assume.

  2. Make sure that remote desktop is able to communicate through your firewall. DONE - FOR BOTH PUBLIC AND PRIVATE RULE.

  3. Find the IP address of the computer on your home network you want to connect. MADE - by using the ipconfig/all command

  4. Open your router configuration screen and worms forward port 3389 for TCP IP address of the destination computer. DONE - NOT TCP/UDP but TCP only, internal and external port goes. Note: The use of a booster signal wifi at the end of the House, it is a problem that requires additional configuration? I don't think he has an ip address or acts as a router. But in desperation I can try unplugging then again head the local Starbucks to try to connect.

  5. Find the IP address of the router so that the remote desktop can be found on the Internet. DONE - using "what is my ip", pretty easy.

  6. Open Remote Desktop connection, and connect. ACTUALLY, I think THAT, IN ENTERING [ip router]: 3389.

  But the result of the message is always the typical:

  (1) remote access to the server is not enabled.

  > But this is not true, that I am capable of the DRC at home on the server machine.

  (2) computer remote is not off.

  > But this is not true, as I just left home 30 minutes and sometimes it's rarely, only restarted.

  (3) the remote computer is not available on the network.

  > Don't know what that means. Of course the remote computer is not on the network, I am on right now. It's on my home network. But I can ping my router ip via cmd, then coming to the outside can be done; through my router, I should be able to access inside my home network port forwarding w. But no love.

  So... what to do, what to do...

  The wifi booster is a problem?

  Connects to the Data Center edition a problem?

  What happens if I uncheck the option ' use authentication NLA, is that the passage of the security risk?

  Any ideas about the configuration I could be missing before giving up and go for VPN or TeamViewer. I would really like to see materialized during all the time that I put in trying to run the DRC.

  Thanks for any input.

  / Markus

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Want to access another computer on Windows 7 using Remote Desktop connection

  Dear member of the community,

  I have 2 desktops, one with 10 windows and more with windows 7. Now I want remote access to the computer windows 10 windows 7 without logging on the computer windows 10. Kindly, guide me for the same thing.

  Hello Alice,.

  I would like to know some information about the problem so that we can help you better.

  The computers are connected to a domain network?

  Thank you for details on the issue.

  I also appreciate that fact that you want to access 10 Windows in Windows 7 remotely.

  With Remote Desktop connection, you can connect to a computer running Windows from another computer running Windows that is connected to the same network or to the Internet. For example, you can use all of the programs, files, and network resources from your computer on your computer at home, and it's just that you are sitting in front of your computer at work.

  To connect to a remote computer that computer must be turned on, it must have a network connection, Remote Desktop must be enabled and you must have access to the network to the remote computer (this could be through the Internet), and you must have permission to connect. To obtain permission to connect, you must be on the list of users. Before you start a connection, it's a good idea to search the name of the computer you are connecting to and to make sure that Remote Desktop connections are allowed through the firewall.

  I suggest you use the steps in this article and check if it helps.
  Reference:
  Connect to another computer using Remote Desktop connection
  https://support.Microsoft.com/en-us/help/17463/Windows-7-connect-to-another-computer-remote-desktop-connection

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• As he tried to establish a remote desktop connect between Windows 7 and Windows XP-error.

  Remote - Windows 7 for XP Pro desktop

  I am running Windows 7 Ultimate and try to use the Office XP Pro system remotely. I am the admin on both boxes and I have all of the necessary credentials. It errors I wonder if there are some parameters in 7 that I'm missing. Any suggestions?

  Hi Caslon540. Here's something that might help you troubleshoot:

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-using-Remote-Desktop-connection

  Another thought, is that you will need to download a later version of connection desktop remotely (version 6.0 or later) so that XP can handle the incoming connection to Windows 7 that uses authentication NLA.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=26F11F0C-0D18-4306-ABCF-D4F18C8F5DF9&displaylang=en

  Hope that helps.

  Thanks for posting,

  Gloria Boyer
  Microsoft

• How to access Windows 8 PC on the Internet with remote desktop connection?

  Hello

  Can someone tell me how to access Windows 8 PC on the Internet with remote desktop connection?

  I'm good with the software and I have used many Microsoft software since the 1980s. So I like Microsoft products, but since they have outsourced their tech support, you can't support quality even if you pay for it. I followed all the instructions in the Windows 8 will help about DRC setting screens, but I can't connect unless I'm on the same home network. Here are the details:

  I have a desktop PC with Windows 8 Pro and I have authorized the DRC. I tried two settings in system properties:

  1. Allow connections to this computer remotely.
  2. That allow the connection of computers running Office remotely with authentication NLA.

  I also turned on both private and Public Windows Firewall settings > allow an App or feature through Windows Firewall.

  I have installation then DRC to my laptop with Windows 8 (standard edition, not the Pro version). I have a DRC using the full name of the computer and other DRC using the static IP address for my ISP Desktop connection.

  I use the user account administrator Windows for connections of DRC of the laptop.

  I cannot get this to work on the Internet from a location outside my house with another ISP connection. The only way it works if I'm uncomfortable with the laptop using the same network home.

  I called Dell tech support and it is always useless and just a more aggravating waste of an hour to talk to their support of technique outsourced in India (who barely even understand English) and then they hang up the phone as it was supposed to be disconnected. I also called Microsoft support and lost more than an hour to speak to their outsourced tech support in the Philippines (and as support of the India, they hang up or 'disconnect' when they cannot answer your question and they go account learn you more about Windows while they do). U.S. tech companies use AMERICANS more for their technical support so their customers can get people who actually care about doing a good job and can actually understand English?

  So if someone who knows using Windows 8 for DRC on the Internet has some tips, then it would be greatly appreciated.

  Thank you!!

  P.S. If anyone is offended by my comments about the ugly, incompetent, stupid providing "technical support" in India or the Philippines - Nevermind! You go ahead and waste hours of your time talking to some Morón in these countries, who barely understands English and then 'disconnects' the call when they know that you realize that they are clueless and have all the answers.

  Take a look at no - IP.com or dyndns.com, and then use your host.domain:3389 of no.-ip/dynDNS or run RelaVNc SErver that is running on port 5900 by default.  Server options allow you to change the port as well if necessary.

• How to maximize the number of RDP session for Remote Desktop connections in windows 2008 server?

  1. How to maximize the number of RDP session for Remote Desktop connections in windows 2008 server?
  2. By default, the system says 2. and to not change/increase.
  3. is everything permissible special necessary to buy?
  Hello
   

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums as it is related to maximize the number of RDP session for Office remote connections to the server. Appropriate in instances of Windows Server.

  Please post your question in the Forums of Windows Server.

• Networking Windows XP to Windows 7 OS via Remote Desktop Connection - it does not connect...

  I manage problems while he was trying to use my connection remote connection desktop wireless with Windows XP for my desktop computer that is connected to my router by an ethernet cable, and my office has Windows 7 operating system. It seems that the remote desktop connection cannot locate this PC BUT I can not enter all office files when I go to my network places that throws me a loop for.

  It is important that I am able to get on my desk that I just had surgery and will be in his bed for 4 to 8 weeks without rising...

  Any help, you can be one would appreciate a lot! Life is what you make if you can walk, talk, see or stand! "Disabled doesn't mean impossible" My 96 Ford Windstar http://Windstarsc.com Supercharged http://brucewalz.com

  And I have another question, I apologize. When I tried to update my profile, I received a message; "Sorry, we're unable to process your request. Please try again later. "I tried the update a few weeks ago, but I got the same message - could - it be me, Firefox or is there a problem? Thanks again! Life is what you make if you can walk, talk, see or stand! "Disabled doesn't mean impossible" My 96 Ford Windstar http://Windstarsc.com Supercharged http://brucewalz.com

• In windows Vista (Home Premium) Remote Desktop connection does not work correctly

  I installed and re-installed my Vista (Home premium) 2 times already because of the remote desktop connection.  I have a problem connecting from another laptop running windows 7 to connect to my desktop running Vista.  The remote control works on the other hand the meaning of desktop running vista, laptop running windows 7 Professional.
  Looking at the Vista under \System\Remote setting\Remote tab which shows the remote assistance box, but the Office box where you can choose what type of connection can be established remotely is missing.

  I went though all as responses to forum, but nothing helped.  Even in a "sfc/scannow" command prompt running did not help.  It is said that he finds corrupted files, but it cannot solve all corrupted files.  That's why I reinstalled windows hoping to fix this problem but WITHOUT SUCCESS.

  Can anyone help?  I've attached a screenshot of what I see in vista.

  You can connect FROM an original version of Windows to another computer, but you cannot connect to an original version of Windows.

  It is not an 'idea' it's hard cold fact that is at least 12 years old.