Windows 7 firewall, just after the power rules

Similar Questions

• Windows xp locks just after the start

  It just started last night and today I got a call from someone calling themselves repair windows (come call of the India) and they state they know bad files have been downloaded on my PC one it needs repair - someone else has had this or know how I can stop what's happening, it starts and then once I got to the main screen of windows the pc just crashes.

  If you can not connect mode without fail, your next logical step would be to try the Recovery Console.  Once in the recovery console, you can try to perform a disk check where the problem is caused by a problem on your drive.  You must type a command like:
  CHKDSK C: /R

  "How to install and use the Recovery Console in Windows XP"
    <>http://support.Microsoft.com/kb/307654 >

  If this does not work, you can try to replace your registry to a backup files.  The best way to proceed is to boot from a bootable CD (I like to use floppies for Linux Live free like Knoppix, but there are other CD based on Windows, you can create such as Bart PE, UBCD4Winand Hirens ) then follow the General steps of KB307545 from part 2, step 6, using the interface graph normal user on your boot CD to move and copy files rather than the instructions of line of order in the article.

  Otherwise, you can use one of the above CD boot (or your install in another computer disc) to back up what files you can on a USB hard drive before reinstalling Windows.

  HTH,
  JW

• Windows 8 freezes during or just after the start

  Hello

  I have a machine to window 8 which has been upgraded to windows 7 and worked perfectly well for several months until last week. It started to freeze during or just after the start in a minute or two.  It works fine in safe mode

  • I tried a lot of things already that is disable all non-Microsoft services, and that did not help.
  • Refresh the PC while keeping the files and settings and who also did not help.
  • Tried sfc/scannow, which did not help
  • Virus search

  Restarted a few times OS and said, I met dpc_watchdog_violation. But no other information.

  Advise the pl

  Hello

  I don't know any list of the differences between starting and Normal. I think you can try to disable Microsoft Services in MSConfig, but it's just a guess.

  There is a box to check in MSConfig to create a log, but I know nothing about it, or where it would be stored.

  If everything worked at some point, there must be an update of a certain type involved...

  I suggest that you try to post the question to the TechNet Forum... Anyone know of this problem...

  http://social.technet.Microsoft.com/forums/en-us/w8itproperf/threads

• Computer TouchSmart HP Envy 17 t 2 weeks without a break stop at or just after the connection

  Hello

  I really need help because I am pulling all my hair out with frustration. Here are the details:

  I got a new Notebook HP TouchSmart 17 t for my birthday last week. I'm a developer and a code about 15 hours a day, and my laptop 15 inch 3 years was certainly an obstacle. Needless to say, I was very excited by envy, especially 17-inch screen.

  That excitement lasted about 2 days.

  In the first two days of use, I installed all the Windows, Windows updates 8.1, Chrome, Visual Studio, SQL Server 2012 and Management Studio, MySQL Workbench, Adobe Creative Cloud, MS Office, and Avast. The system will periodically re-start during this time, but he wasn't even epidemic.

  But from about the 3rd day, the computer began to stop more frequently. Initially, it was once every 30 minutes or so, but then increased rapidly so it restarted at or just after the login screen 9 of the 10 startups. Every 10th reboot or so, the computer will allow me to connect and I immediately try troubleshoot it before it will re-start again in 5 minutes or less.

  The only thing I could think of that changed on the 3rd day is I installed Kaspersky to replace Avast (the laptop came with a 1 year free Kaspersky subscription). I didn't know if it was the culprit, or if I had a lemon of a computer that was overheating because of hardware problems, but to be sure, I tried to uninstall it. However, the computer wouldn't stay long enough for me to do.  I couldn't even in HP Recovery to restore the system.

  Fortunately, I had burned the recovery DVDs and was able to start the recovery tool by booting from the DVD. I restored the computer configuration with minimal additional software installed (restore failed the on the first trial to 99% complete, but the second test was a success). I was really hoping this would solve the problem so I can start using my new laptop.

  No luck.

  The first time I turned on the computer after the restore, it immediately starts close to, or just after the screen connection again. As before, I am able to use the computer for 5 minutes every 10th reboot or so before it restarts. During those rare moments, I was able to enter the power management settings to turn off sleep and Hibernate, given that several forum posts which indicate as a potential culprit. However, the computer won't stay long enough to install updates of window or Windows 8.1, or to ensure that all drivers are up-to-date.

  Furthermore, I believe that the BIOS flashed when Windows 8.1 has been installed and I wonder if it needs to be reset. (I don't think the restoration process reactivates the BIOS to its original settings, but I have really no idea.)

  Anyway, here I am with a new laptop that I can not use.  I don't know if it's a driver problem, software conflict, hardware problem, problem of BIOS or something else. Needless to say, I am very frustrated and I would really appreciate suggestions.

  Thank you

  Tom

  Tom, welcome to the forum.

  This isn't how HP computers to run.  I strongly suggest that return you it and get another HP computer that works.  If it does not work long enough to install the updates, it will very probably not get much better.  I want to help you to save your hair!

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Vista goes into sleep mode automatically just after the restart

  The following problem was irregular. Sometimes, other times not. I'm totally frustrated as to why it is happening and I would like to solve this problem, now and forever.

  Yes, first facts: I have an Asus G71Gx laptop game with Nvidia Geforce GTX 260 M. 6 GB of memory, Windows Vista 64-bit. Do not think that other information is necessary, unless I'm mistaken.

  The problem: well, just after the start/start my laptop goes into sleep mode. As in, Windows starts fine and I see my desktop with all the shortcut icons and the background, and then all of a sudden the screen goes black (with two Dim lights blue on the screen - fellow Asus G71Gx users will know it), and the power led button flashes slowly in and out, as if it was in sleep/hibernation. The led light cover mode monitor "sleep". I did the whole "all never put under power options. I've updated my Nvidia graphic drivers for later. I even disabled Hibernate in the command prompt. Seriously, I have above average PC knowledge. But it has trampled me... everything short.

  Sometimes, I have to go through this cycle up to 9 or 10 times and then stops. Other days there is no question. But I still have to reboot just to be safe and to avoid the game stutter (another question that I don't know what it is, since I was the latest GPU drivers). But I can live with that.

  It cannot be an overheating GPU. I mean, it's at the start and at the present time, it is cold enough to have this piece as a cooler for the GPU! Haha.

  I thought about possible power supply problems. But how to test it? The laptop doesn't have it, the first week I got it. I use an adapter to put the American card in European decision-making.

  It is the ONLY major problem I have with this laptop. Sleep at startup. The other two, being game stutter if I don't restart my laptop and double tapping (seems to be an Asus problem according to the forums), are quite minor and I can live with that.

  Any help with this would be GREATLY appreciated. I'm VERY tempted to get windows 7 and do a clean install, but Vista was not really giving me any problems. But if I know that this issue is associated with Vista, then I say Bravo to Vista...

  Edit: Apologies for writing this thread Windows 7 and explore the internet forum. Don't know how it happened! Well I'm leaving here now, and hopefully this will get sorted.

  After 2 replacements of mobo that apparently caused this same prob, what finally fixed for me has been updated the chipset drivers.

• Windows does not start after the most recent update

  I have 64 bit Vista and Office 2007. There was a group of updates for the latter in February 2011. Something in here is stop Windows at the login screen. Workes mouse and keys stick, but it won't take me to the password screen. Only way to get around it was to go in safe mode and do a system restore to remove the updates. Any suggestions?

  Applications, (Norton and McAfee) are notorious for not not upgrade (or uninstalling) itself.

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) via Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of Norton 360 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8 reset the advanced settings of the IE by http://windows.microsoft.com/en-US/windows7/Reset-Internet-Explorer-settings

  9. open Internet Explorer (32-bit) only to http://support.microsoft.com/kb/971058 [ignore APPLIES to section] & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  10. restart once again & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows updates always installed after the return to a previous restore point?

  A restore point to bring victory 7professional. What will happen with the windows updates that came after the restore point?  Clicking on updates windows just always looking for updates, nothing happens. Updates are received before the restore point still installed?

  Windows update itself creates one in order to make them reversible. To resolve the issue, see updated:

  Windows 7 update problems? First read this.

  Best regards, VZ

• Upgrade Windows 8 Pro blocked after the first reboot

  I have a HP Media Center PC m7470n. When I upgraded with Windows 8 Pro disc, after the first reboot, it gets stuck on the Windows form with turning points. He's not going back to XP and when I stop and restart, he goes right back to the same screen. I tried to boot from a hard drive and CD ROM with the disc in. I also tried to do a system restore, but it still maintains just that goes back to the same screen. , I even contacted Microsoft Support and after 1 1/2 hours, I had to let go because I had to go to work and they do not have a solution for me. I am not able to go in Mode safe either. Can someone help me with this update or at least get back to XP so that I can at least use my computer? At the moment I feel that Windows 8 Pro comes to have my computer in an oversize weight.

  Hello

  Thanks for posting the question in the Microsoft Community. If I understand correctly, you can not connect to the computer. I understand that it must be frustrating, but don't worry, we are here to help solve the problem and guide you in the right direction.

  I suggest you follow the steps:

  (a) starting from the DVD of Windows 8.

  (b) click on repair your computer.

  (c) click on troubleshoot.

  (d) click on Advanced options , and then click auto repair.

  (e) follow the on-screen instructions and complete the repair.

  If you are always faced with the question, please respond with more information, and we will be happy to help you.

  Thank you.

• Cannot send messages just after the update on Nov.18

  I have no details. It happened just after the Thunderbird updated automatically from the internet on Nov.18 (Fri) JST. After writing an e-mail, press send below, the softeare confirming the address and receiver, then is NOTHING PAST. Just to return to the window of e-mail must be sent.

  I suspect you updatd to 45.5.0?

  Could be caused by lightning. Look at the tools | addons | Look for the updates.

  Please tell us, is the latest version?

  If that fails, what happens if you run Thunderbird in safe mode?

• Just after the cancellation of my subscription, you asked my credit card for a monthly payment! I tried to cancel this subscription done for a long time, and now that it's done you keep me!  Please immediately refund my money!

  Just after the cancellation of my subscription, you asked my credit card for a monthly payment!

  I tried to cancel this subscription done for a long time, and now that it's done you keep me!

  Please immediately refund my money!

  In this case, you must contact and check with Adobe support:

  Click always need Help (help), and then select the Chat option:

  Contact the customer service

• Problems with InDesign CC 2015 and El Capitan DP7? With DP6 is was awesome, with DP7 crashes just after the start.

  Hello!

  Updated El Capitan DP7 this morning and InDesign crashes just after the start. (With DP6 is was great)!

  Any comment/suggestion/help?

  Process: Adobe InDesign CC 2015 [1409]

  Path: / Applications/Adobe InDesign 2015/Adobe InDesign 2015.app/Contents/MacOS/Adobe InDesign 2015 CC CC CC

  ID: com.adobe.InDesign

  Version: 11.1.0.122 (11100)

  Code type: X 86-64 (Native)

  Parent process:? [1]

  Responsible for: Adobe InDesign CC 2015 [1409]

  User ID: 501

  Date/time: 18:32:41.676 2015-08-21 + 0200

  OS version: Mac OS X 10.11 (15A263e)

  Report Version: 11

  Anonymous UUID: 0061129A-F597-5AFB-7DF4-CF3E3B3FDDA2

  Time since started awake: 5800 seconds

  Crashed thread: 0 dispatch queue: com.apple.main - wire

  Exception type: EXC_BAD_ACCESS (SIGSEGV)

  Exception codes: KERN_INVALID_ADDRESS at 0 x 0000000000000040

  Note the exception: EXC_CORPSE_NOTIFY

  VM regions near 0x40:

  ->

  000000010aff9000-000000010affe000 [20 K] __TEXT r-x/rwx SM = COW/Applications/Adobe InDesign CC 2015 / Adobe InDesign CC 2015.app/Contents/MacOS/Adobe InDesign CC 2015

  Global tracking buffer (second chronological reverse):

  3.729044 CFNetwork 0x00007fff8b5b9a9b TCP 0x7fb494e71f80 SSL Handshake Conn MADE

  3.975525 SSL handshake at the start of CFNetwork 0x00007fff8b5b9977 TCP Conn 0x7fb494e71f80

  3.975626 all 0x00007fff8b5b821f TCP Conn 0x7fb494e71f80 CFNetwork. FD: 60, err: 0

  3.976001 event TCP Conn 0x7fb494e71f80 CFNetwork 0x00007fff8b5b77d1 1. Err: 0

  4.138228 CFNetwork TCP Conn 0x7fb494e71f80 0x00007fff8b5b6faf started

  9.259148 CFNetwork 0x00007fff8b5b9a9b TCP 0x7fb48d5d0f00 SSL Handshake Conn MADE

  This fixed it for me:

  
  

  Solved: Disabled the auto-hide the menu bar.

  
  

  InDesign crashing on the opening (using the beta OS El Capitan 10.11)

• CPU constantly tries to reboot - just replaced the power supply - and can't get into Windows at all the

  I replaced the power supply 2 weeks ago and left the computer.  Follow me up one morning, the computer froze and when I tried to reboot, it whirs and stops... 5 seconds later same thing.  The power button lights up orange... someone can give me an idea of the problem?  Defective power supply replacement?

  Hi Cathy,.

  This seems to be a hardware failure. You must get in touch with the manufacturer of the system or the local Techshop for better assistance.

• Analyze the error "C:\Windows\Panther\unattend.xml" after the recovery attempt (computer laptop gateway)

  I had a problem, which lead to the other. I'll just show what I posted in the other thread. Thus, I have provided the link for reference.

  This is the excerpt from this thread: http://social.answers.microsoft.com/Forums/en/vistawu/thread/a42818dc-4037-4551-aaa4-bc1330d4203b?prof=required

  "Well, then taking your advice, I found the software to restore the computer to its original state. I save all of his documents and then run the restore process. Should be no problem right?

  NOPE! It installed fine, and now it is stuck in an ANOTHER infinite boot loop! (This laptop must love restart all the time).

  So yes, this is what he does now.

  It starts normally with the typical screen of Vista (the puke green bar fly across the screen). Then it comes up with the screen blue-green pretty fancy, and it says "Please wait while Windows continues to set up your computer...". »

  Right now, it comes up with this box beautiful error "Windows could not parse or treat [C:\Windows\Panther\unattend.xml] unattended Setup answer file. The answer file is invalid. "with the OK" "button. You click on 'OK', it stops and then restarts, shows the same message.

  I tried Googling this error, but nothing of the suite of solutions my situation. Ugh! Of course, I can't get back into windows and simply stop and start the restore process again.

  Ideas? »

  Just so that you know it's a she is a Windows Vista Home Premium 64 - bit SP1 OEMAct gateway.

  http://support.gateway.com/s/software/MICROSOF/Vista/7515418/7515418su531.shtml

  Above is how the gateway recovery is supposed to work.

  Also, try this:

  Try using a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the gateway > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  To exclude software as the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• Edge 14. Battery not charging after the Power Manager Update to 6.07 and resetting the battery.

  My battery will do not, at all.

  The gauge was obviously wrong to happen very quickly after reaching 20%, so I've updated the power to 6.07 Manager and then perform a reset of the battery (I'm sure it's in that order, perhaps first reset).

  After resetting the battery charged to 100% back, but as it is discharged, the charger was not.  With the power, the battery is located just at the same percentage and descends very slowly (about 1% in two days).

  I tried to play with the parameters of maintenance battery, the meter then said that charge will begin less than 80%, but the battery is already on the 20%.  I checked the firmware in the Manager of power and with the stand-alone program but apparently no update is necessary and T 42, 4755 FRU part number is not listed as needing an update.

  Current version of the firmware: 3f98-0004-0160-0130

  I tried uninstalling and reinstalling Power Manager.  The power windows manager also seems to have the same problem.

  I just baught the laptop last year, is a month out of warranty; I need it to be portable to work.

  I thought about buying a new battery, but it seems to be the charge function is not working, and the battery was working fine before the reset and the update, apart from the loss of certain abilities and the inaccurate meter.

  Product: 0578CTO Thinkpad Edge 14

  BIOS: 80ET61WW (2.01)

  Any help would be greatly appreciated.

  Nathan

  19% and declining

  Hi NINE.

  Thank you for hospitality, the effort and the answer.  Greatly appreciated.

  I tried this and just tried to reinstall the firmware of power management.

  I finally solved the problem after reading this post by:

  1 shut down the computer.

  2. unplug the power supply cord (and everything - usb and monitor cables).

  3 remove the battery.

  4. play with the spring on the battery switches and shake threatening (probably unnecessary, but you may want to give it 10 to 15 seconds on the laptop).

  5. replace the battery in the laptop.

  6. connect the power cord.

  7. start the laptop and connect.

  Thanks again.

  Nathan

  48% and load

• Satellite A10 dies after the power LED blink

  Hello

  I have a problem with the power supply of my Toshiba Satellite A10. Sometimes, after the computer sat for some time, I have a problem with the power. The "plugged power cable" - LED will start to blink and shortly after, the computer just dies.

  It can also have the time to go into a lower energy state before he does. When it happened once, it will most likely happen also when I restart the computer, but after a much shorter time. WXP won't even have time to start. If I stop to select the source of start-up, the problem will occur anyway, this isn't the software. It should also be noticed that when the computer is not turned off, the 'smart power' - is on correctly.

  I know that my battery is not very good. Completely loaded, the computer can run for maybe 3 minutes with only the battery. I know that I must have a battery connected, even if I use the power cable, but this occurs even when the mine problem. The battery would be pretty bad not even allow me to use the computer with a cable?

  It should be added, that sometimes I can use the computer for long periods of time without this problem to happen. I also have a problem with the battery not being not properly in physical contact with the pins of the computer, but this isn't the problem here, because I have the same problem with the battery removed and me holding the battery in place.

  Thank you for your help.

  Andreas

  Hello

  You description is very long and detailed and it of still not easy to say what's wrong.
  Usually, the DC-In witness lights up green when DC is provided FRO the AC current. If the output voltage of the adapter is abnormal or if power outages, this indicator flashes orange.

  So I think that is your AC adapter malfunctions or there is something wrong with the electronic power supply on the motherboard.