Windows 7 - (Freeze installing KB982381)

Similar Questions

• Windows Update freezes when installing updates

  Whenever I turned off my computer, windows update freeze install update 2 of 5. I let it run for hours, and still it does not move beyond update 2 of 5. I've been struggling with this probably 2 months now. Because it's cold, I have to hold the power button to force it to stop. Can anyone help. I'm not super irritable and be overwhelmed by this problem.

  Hello

  Try the following.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  When it is loaded in the Menu start, open all programs, open accessories, right-click on command prompt and select "run as Administrator".

  In at the prompt, type the following command and press ENTER.

  sfc/scannow                (Note that there is a space between sfc and /)

  Let the entire process, then the output type and press ENTER.  Restart the laptop.

  Let windows load completely and then try to run the Windows Update 'Fixit' at the following link.

  http://support.Microsoft.com/mats/windows_update/

  Kind regards

  DP - K

• Desktop Windows 7 freezes as soon as I log in, then the analysis of disk is automatically cancelled

  Last month, my office has been freezing almost whenever I connect, I rebooted my laptop or close and turned on afterwards. The way I know that it is frozen is when my wifi icon is the blue loading circle and when I right click on my slider and it is located in the blue loading circle. Then after I do a restart hard (hold the power button and back - turn on my laptop), after the screen usual "the computer did not turned off properly", I see "scan disk" screen Even if I touch any key so analysis can run and maybe find the problem, the analysis is automatically cancelled. I pass this cycle at least twice before being able to use my computer properly.

  I've had my laptop for 4 years. It is a Dell Inspiron N5010 Windows 7 Ultimate 64 - bit Intel Core i3 processor. For safety, I got Kaspersky Internet Security for one year. Is there anything that can be done to prevent it happening again?

  Hello

  You can check with Dell, their books online technical support, diagnostics,
  and ask questions in the forums about known problems.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  Dell PC Diagnostics
  http://www.Dell.com/support/Diagnostics/us/en/19/
  ==============================

  Error: Windows Explorer has stopped working
  http://support.Microsoft.com/kb/2694911

  Windows hangs or freezes<- try="" these="" first="" and="" the="" methods="" do="" apply="" to="" your="">
  http://support.Microsoft.com/kb/2681286#method22

  Performance and Maintenance<- check="" these="" especially="" the="">
  http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-7&V2H=win7tab1&V3H=winvistatab1

  Other methods of troubleshooting to use according to your needs:

  Use the startup clean and other methods to try to determine the cause of and/or
  eliminate problems.

  ---------------------------------------------------------------

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Include
  everything you've ALWAYS had on this machine, including those you have uninstalled (they
  remains of leave behind which can cause strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows
  Vista or Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  Optimize Windows 7 for better performance
  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Open the troubleshooter of Performance
  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  To see everything that is in charge of startup - wait a few minutes without doing anything-
  then right click on taskbar - task manager - take a look at Applications.
  Process - Services - this is a quick reference (if you have a little box on)
  Lower left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Is a quick check to see who are loading method 2 - using MSCONFIG
  then after a list of these here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what files, registry keys, and other objects
  processes have open, which DLLs they have loaded and more. This unique
  powerful utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically
  When your system boots and you connect. Autoruns also shows you the complete list
  locations of registry and files where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor file system, registry, process, thread and DLL
  activity in real time.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are
  loaded automatically when Windows starts. For each application, what follows
  the information is displayed: Type of startup (registry/Startup folder), Command - Line
  Channel file, the product name, Version, company name, location in the registry or
  file system and more. It allows you to easily disable or remove unwanted programs
  that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe
  not. The window Watcher says it all, every window created by each execution of the statement
  program, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp
  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded: run DriverView - set
  SEE drivers to hide Microsoft - update those without drain in their names. (Also
  updated the BIOS and drivers from the chipset on the site of the constructor/the system motherboard).

  -Free - DriverView utility displays the list of all device drivers currently loaded
  on your system. For each driver in the list, additional useful information is
  Poster: load address of the driver, description, version, product name,.
  company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit Maker as replacements and system manufacturer of device which are
  the most recent. Control Panel - write - graphics card - device manager
  the brand and complete model of your video card - double click - tab of the driver-
  Note the version information. Now click on UPdate Driver (this can do nothing
  MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
  If there are 3rd party with their own software and drivers and the other main device drivers
  you have.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
  and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
  their latest versions. (Look for the system to update the BIOS, Chipset and software updates
  Site of the manufacturer here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
  REBOOT after each installation.

  Always check in the Device Manager - drivers tab to be sure the version you are
  installation actually appears. This is because that some rollback of drivers before the
  later is installed (particularly that audio drivers) so install a driver - reboot.
  Make sure that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
  SCANNER - check manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using
  the above methods is preferable to ensure the latest drivers from the manufacturer of system
  and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable driver facilities
  in the updates of Windows, which leaves on Windows updates, but it will not be installed
  pilots who are generally older and cause problems. If updates provides a new
  driver then hide it (right click on it) and then go get new ones manually if
  you want.

  How to stop Windows 7 automatically install drivers
  http://support.Microsoft.com/kb/2500967

  ===========================================

  Refer to these discussions because many more excellent advice however remember to check
  your antivirus, the main drivers and BIOS update programs and also to solve problems
  with the first method cleanboot.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Windows 7 freezes on complete Installation with my HP Pavilion a6500f

  I did turn a copy of 64 bit Vista on my HP Pavillion a6500f until very recently. Need a clean install of Windows 7. He gets during the major part of installation very quickly, but when it gets to the install finished step, it freezes. What should I do?

  Tips for solving common problems when Windows 7 won't install troubleshooting

  1. start Windows Upgrade Advisor to see if there are known issues that might affect the installation and correct them.
  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  2 disable any security software: anti-virus, firewall etc. Don't forget to activate the Afterwords.
  3 make sure that your computer has the BIOS and latest drivers. Update of the BIOS can be risky, don't do that if nothing else works.
  4. disconnect all external devices except the keyboard and mouse before installing.
  5. If using a video card and the computer has integrated video use and remove the video card.
  6 unplug the computer from the internet, if you have wireless disable.
  7. RAM (memory) - reduce the amount of RAM. 1 GB if 32-bit installation, 2 GB for 64-bit, then replace RAM if the upgrade was successful. If you added new RAM make sure it is also compatible.
  8. If you have several hard drives remove all except the one that you install Windows 7, and then replace it after Windows 7 is installed.
  9. If you have downloaded Windows 7 and it burned a DVD test burn again at the slowest speed possible. It is also possible the download may have errors, you can try to download it again.
  10. If you click 'Upgrade' to start the installation make sure that you take a supported upgrade path. You can't make a square by update: type A) XP to Windows 7, B) fuse change - 32 to 64-bit, C) change languages, D) decommissioning editions ex: Vista of the month last 7 Pro, or E) Vista Home Pro 7.

  11. check your RAM (memory) to find errors. Can take a long time, don't make that if nothing else has worked.
  (A) Insert the Windows 7 DVD and restart the computer.
  (B) start from the Windows 7 DVD.
  (C) select your language, and then click Next.
  (D) click on "repair your computer" then select the operating system to fix it.
  (E) click on the link of the Memory Diagnostics in the system recovery menu.
  (F) the computer will restart and your memory is checked for errors.

  12 turn off startup programs:
  (A) click Start, type MSCONFIG in the search box and press ENTER.
  OK the authorization of user account control and password if necessary
  If you are using XP: click Start, run, and type: MSCONFIG and click OK.
  (B) on the general tab, click Selective startup.
  (C) just below the selective startup, clear the checkbox "Load Startup items".
  (D) click the Services tab, check "Hide all Microsoft Services", and then click Disable all.
  (E) click OK, and then restart the computer.
  (F) try the upgrade again.

  (NOTE: If the upgrade fails and you continue to use your rear security software, then also go back into MSCONFIG and under the general Tower XP/Vista tab, click "Normal startup", and then click OK to exit.)

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Windows 7 freezes at startup

  I just installed windows 7 a few weeks ago, and now when I start the computer it gets at the prompt "starting windows" or page and there it is. I tried to restart and it comes up with repair system that I ran and even system restore and it still sometimes freezes. Any ideas what's wrong with windows 7. I have installed new software and I have virus and spyware. When it freezes it always shows the logo and message of departure

  Hello

  You can try some of them in Mode safe - tap F8 repeatedly that you start.

  If you do not have a Windows 7 disc, you can borrow a friends because they are not a copy
  protected. The manufacturer of your system will also sell the physical DVD cheap since you already
  Clean Windows. You can also do an ERD on another computer.

  Try the Startup Repair - (if at anytime, benefit you from some, but not full access coming to Windows
  return and then try to startup repair.)

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Try the disk Options recovery or Windows 7 startup repair.

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  Also from the command PROMPT on the Console (if possible) recovery or a Windows 7 disc

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  Retry After Chkdsk startup repair.

  If after those you can try the system restore to fashion without failure or the valuation or Windows 7
  disc.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  --------------------------------------------------------------------

  If you need to repair disks - these help repair Windows not re-install.
  Often an ERD will help you when the recovery disk does not work.

  Download Windows 7 system recovery discs - charge now $9.75 for ISO
  images to make the discs.
  http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/

  How to create a Windows 7 - free system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  An installation disc is possible also to use for repair. Of course you would
  Use your own COST (product key).

  How to: What are my options for Windows 7 reinstall media?
  http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-system/how-to-what-are-my-options-for-obtaining-Windows-7/528163c1-0b2e-4AD2-a26d-7112851d1dc2

  Welcome to the recovery of Microsoft software
  http://www.Microsoft.com/en-us/software-recovery

  See MVP Andre Da Costa message in this thread.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/how-can-i-download-gatewaywindows7recovery-disc/3c0ecd74-CFC1-4188-89c7-a6bbe8113ee1

  =====================================

  If necessary:

  What to do if Windows does not successfully start (applies to Windows 7 as well)
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Desktop Windows 7 freezes.

  I recently updated my card motherboard and CPU. Went from Intel Core2Duo to AMD FX 6 core and motherboard went from Foxconn to an MSI a not sure about the particular model but both were on the card. I had to do a complete fresh re-install of Windows 7 Home 64 bit just to get the pc to boot. I first noticed the problem whenever I plugged my speakers sound on Board decision-making. I thought that it could be a conflict with my mouse because as soon as I plugged it it it would freeze upwards. I went on the installation disc motherboard and ensured that all drivers have been installed correctly. I then plugged my speakers back in and it worked fine. Now it hangs just periodically when I am downloading and trying to use google chrome

  Hi Rick,

  Perform the steps from the link below and see if it helps.

  Crashes Windows or freezes

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection.

  Please take a backup of the data on an external drive such as scanning could result in loss of data.

  Good day!

• Windows 7 freezes after the password entered

  It is a windows 7 Compaq Presario laptop. It freezes immediately after the entry of the password. It crashes in safe mode as well. When I go to command Mode need me to network mode so I can't run all the tests. The fan had run hard before, but I don't think that is the main question. I could install a new hard drive but I don't have an operating system. I expect to get out of this without spending too much money

  Hello

  Thanks for posting the question on Microsoft Community.

  According to the description, it seems that Windows 7 freezes once the password is entered.

  However, we need more information about the issue to help you better.

  Please help me answer this question.

  Were there any changes made to the computer before the question?

  I have this link which should guide you in the right direction for the freezing of Windows 7.

  Try the steps mentioned in this link and check:

  Crashes Windows or freezes

  http://support.Microsoft.com/kb/2681286

  Note: The Microsoft Safety Scanner expire after 10 days from the date of installation.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps. If you have questions more related to Windows feel free to post here at Microsoft Community and we will be happy to help.

• Windows 7 freezes in Normal Mode.

  Hello! I use my Dell Inspiron 17R about 2 months ago and this is a fantastic phone, I use it mainly for video games, music and Movies/TV shows and he ran without fault far.

  Yesterday, however, the problems began to occur. I could boot up the laptop as usual and access the Internet, play games, watch movies etc, but after about 5 minutes everything would suddenly become unresponsive. Both my mouse and trackpad do not allow me to click at all, however I could move the mouse around the screen quite well. The keyboard would not work also - I tried to open the Task Manager via Ctrl + Alt + Del but also closing windows with Alt + F4 or by train at the stop via the Windows key and nothing would work. Instead, the cursor would change to the "loading" symbol and it would pretty much just doing nothing.
  The first time that this happened, I was browsing the Internet and it comes if is stuck on "Waiting for Cache" or something so that probability, I then noticed the circle of rotation which shows a page loading also stopped and was then forced to manually restart because I couldn't even click on the Windows button. Another test I tried watching a video uploaded - it literally just stopped playing about 4 minutes. The screen is just stopped on a single image even if the pause button had not been pressed - try clicking on what anyone did not work (as usual).
  I tried to restart it several times (I unfortunately had to use the power button) and he began to repeat each time. It would work for a few minutes before freezing completely (less opportunity to unnecessarily move the mouse around the screen). Sometimes a pop-up window would be above the bar saying that stains the 'Microsoft Windows application became unresponsive. Sometimes the taskbar then disappear and the laptop would be closed, but the end result is always the same.
  I found that the same problem moved with the boot safe mode with networking, however there were a few noticeable slowdown. I downloaded and used many anti-viruses/malware to analyze my machine and I'm almost certain that there is nothing of the those on the computer (although in fairness, the scans have been so slow I could do before giving up only to about 20% on each). Other solutions, I tried included:
  1. manually end tasks of high memory use via the Manager of
  2. with the help of CCleaner for fix my registry in Mode safe
  3. left the laptop shut down during the night in hope it would just set
  4 disconnected everything from the laptop ports
  5. rebooted via the reboot, shutdown and power buttons
  I'm sure I tried other things as well, but I am quite limited in the fact that I can use the laptop for a few minutes before he decided to stop working. I really need the laptop for my studies and I would be absolutely in love if one of you could help me solve my problem.
  Thanks in advance!
  -Jordan
   
  Original title: error: after about 5 minutes of work after booting, Windows 7 freezes completely

  Hi JordanRidehalgh,

   

  Thanks for posting in the Microsoft Community. It seems that you have a problem with Windows 7 gel. This can be very frustrating for you, and I appreciate the efforts you have put in. Let us work together as a team to get this number fixed.

   

  We start with a few questions-

  (1) that you get an error message or error code?

  (2) did you install hardware or software on the computer before the show?

  I would like more information about the issue.

   

  Method 1-

  I wish that you run anti-virus in Mode safe mode with networking using different antivirus software.

  In addition, I'd download (download and install in Normal Mode) and execution (in Safe Mode) the online scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The antivirus will try to repair bad sectors on the hard drive damaged by viruses. All the data on these sectors may be lost.

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Make sure you get the computer back to Normal Mode after performing all the troubleshooting steps.

  Method 2-

  It is possible that a third-party application is causing the problem as the computer worked well in Mode without failure.

   

  I recommend you perform the clean boot.
  
  Placing the computer in a boot minimum state helps determine if third-party applications or startup items are causing the problem. You must perform the steps in the article-
  
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: You must follow the step 3 of the article to return the computer to a Normal startup after you perform all the troubleshooting steps.

   

  Check if the problem persists.

   

  Method 3-

  I would have you look at the article-

  Crashes Windows or freezes

  http://support.Microsoft.com/kb/2681286?WA=wsignin1.0#method52

  Note: The antivirus will try to repair bad sectors on the hard drive damaged by viruses. All the data on these sectors may be lost.

   

  We know if you need help. We will be happy to help you.

   

  Thank you.

• Windows crashes when installing itunes

  Everytime I try to install itunes 10 on my laptop, windows everything freezes, including the mouse pad and I have to force close down, with the power button. I have Windows 7 installed on my laptop. Any help Pleeese?

  Hello

  1. the problem occurs only when installing iTunes?

  2. you get any error message?

  3. How do you try to install it?

  I suggest you to try the steps from the link and check if this may help.

  Method 1: Problem installing iTunes or QuickTime for Windows: http://support.apple.com/kb/ht1926

  For your reference: Solve the problems installing and uninstalling the programs on Windows computers. http://support.Microsoft.com/kb/2438651

  Hope this information is useful.

• Error Windows 8 not installed - upgraded Satellite C855 PSKCCE question

  Hello, I tried to update from Windows 7 to Windows 8. I followed all the instructions to remove all applications were asked, but, unfortunately, I received an error message from Windows 8 (Windows 8 not installed).

  My computer is a C855 (PSKCCE) I saw it cared about the Toshiba product for the upgrade list.
  Is something special to do (for example, remove antivirus or other specials) before the upgrade?

  Do you have any suggestions?

  Hello

  Please go through unique documents to win 8:

  * Windows 8 Upgrade - Notes and Restrictions *.
  http://APS2.toshiba-tro.de/KB0/TSB2A03EL0000R02.htm

  * Windows 8 upgrade guide *.
  http://APS2.toshiba-tro.de/KB0/TSB2A03EJ0001R01.htm

  This document describes the installation of upgrade from Windows 7 to Windows 8.
  http://APS2.toshiba-tro.de/KB0/TSB2A03ER0000R01.htm

• Boot Camp Windows Installation 10 - "Windows cannot be installed to this disk. It's the GPT partition style.

  Hello

  I tried to dual boot Windows 10 alongside OS X El Capitan on my iMac 21.5 inch i5 end 2013. I have followed all the instructions in the Boot Camp assistant, restart, choose the yellow 'Windows' drive to boot from, but when I get to the Windows installation, enter the product key and language, and then select the partition (0-4, the partition Disk Partition) it tells me that "Windows cannot be installed to this disk. The selected disk is the GPT partition style. »

  So I found this answer: How do I install Windows 8.1 on Haswell MBP

  But then I received the same error.

  Tried this: http://macriot.com/mcrt/?p=2362

  But fdisk TPG allow me to change anything, as the SIP is enabled.

  Tried to disable SIP via a command line in a terminal in recovery mode, but got an error-bash: command not found csrutil.

  So now I'm stuck on all fronts. Any ideas?

  Thank you

  RedPanda

  1. your iMac end 2013 supports the facilities of BIOS/MBR and GPT/EFI.

  2. the legacy BIOS/MBR method requires a hybrid MBR.

  3 EFI/GPT is recommended for your specific model.

  4. you can use the GPT Fdisk steps in your link to make your drive a GPT disk only. It is not enough.

  5. you will need to convert the FAT32 partition space using the following OS X Terminal

  diskutil eraseVolume free disk0s4 FREE

  This will return an error, because free space is not associated with disk slices.

  6. at this point, use the USB installer created by the wizard of BC, boot from it and hold down the Alt/Option key and select Boot EFI (not Windows). Point to the portion of the free space that you see after the + 620 MB Recovery HD. It will separate into a small (128 MB) MSR and the rest as MSD (NTFS).

  7. do not install W7 in Boot EFI, because it has some difficulties.

  8. when Windows is installed, and BC drivers are not installed, run setup.exe from the Bootcamp folder.

  9. If csrutil is not found, you are in the recovery of the Internet, because your local Recovery HD is corrupted. The rescue of the failure of the local recovery is restoration of Internet. Your must be on El Capitan. There is no csrutil (or SIP) before El Capitan.

• I want to uninstall Windows 8 and install Windows 7

  HP ENVY m6-1125dx Notebook PC

  My laptop came with Windows 8. I really don't like Windows 8, it is too restrictive. I want to uninstall Windows 8 and install Windows 7. How to go? Where can I get the operating system and driver software.

  Should I buy Windows 7 separately? Or can I use the same key?

  Before installing Windows 7, can I suggest an idea?

  I had the same problem: I'm a Windows 7 user who bought a laptop Windows 8 and don't really like the Metro user interface. It is half cooked for desktop/laptop computer, several apps to not scroll horizontally with the touchpad, etc, etc.

  But what I did install a simple program called "Debut8" (http://www.stardock.com/products/start8/) that still allows me to go right at the part 8 Windows desktop and use it as I have Windows 7. The advantage of this approach is that you get the benefits of the internal improvement of Windows 8 (some improvements in performance on Windows 7, etc.) and do not have the hassle/cost of installing Windows 7. You can also try a GPL program called Classic Shell (http://classicshell.sourceforge.net/). So far I am happy with debut8 as a solution.

  Anyway, worth before going through the cost and difficulty of installing Windows 7.

• Error code: 0 x 80070643 (Windows Defender cannot install definition updates)

  I get a message saying windows Defender cannot install updates of definition, what should I do? should I uninstall the program and reinstall it? Thank you

  Windows Update error 80070643

  Windows Update error 80070643 can happen for several reasons. The most common cause is a problem with the .NET Framework is installed on the computer.

  The .NET framework is a component of Windows that is used to build, deploy, and run programs and applications. Unfortunately, it may be damaged by some programs, viruses or hard drive problems.

  To automatically repair the .NET Framework

  1. Click on the link below

  Repair of .NET Framework

  If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Why is compatible windows 7 with Medal of honor alied assualt and assualt pacifc and airborne, but not with Medal of Honor 10eanniversaire Bundle. and have xp and windows 7 can I play and keep the games on xp with windows 7 is installed

  Why is compatible windows 7 with Medal of honor alied assualt and assualt pacifc and airborne, but not with Medal of Honor 10eanniversaire Bundle. and have xp and windows 7 can I play and keep the games on xp with windows 7 is installed

  Hello
  Welcome to the Microsoft answers site.
   
  By design, the game is not compatible with windows7.
   
  You can also check with the manufacturer of game for any version upgrade of this game, which could be compatible with windows7.

  Yes, if you have the dual operating system on your computer, you can play and record games on xp, start the computer in Xp and you can play the game.

  I also invite you to visit this link to learn more about running the old programs/games in xp or vista compatibility mode.

  Here is the link:
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Let us know if you have any questions.

  Thank you and best regards,
  Azam - Microsoft technical support.

• Windows Live Essentials installed on my computer, but still unable to upload photos to transfer from

  Windows Live Essentials installed on my computer, but still unable to upload photos to transfer from.

  Would appreciate any advice.

  Hi JohnHyde,

  The question you posted would be better suited to the Windows Live community. Please visit the link below to find a community that will provide the support you want.
  http://windowslivehelp.com/product.aspx?ProductID=15