Windows 7 freezes in Normal Mode.

Hello! I use my Dell Inspiron 17R about 2 months ago and this is a fantastic phone, I use it mainly for video games, music and Movies/TV shows and he ran without fault far.

Yesterday, however, the problems began to occur. I could boot up the laptop as usual and access the Internet, play games, watch movies etc, but after about 5 minutes everything would suddenly become unresponsive. Both my mouse and trackpad do not allow me to click at all, however I could move the mouse around the screen quite well. The keyboard would not work also - I tried to open the Task Manager via Ctrl + Alt + Del but also closing windows with Alt + F4 or by train at the stop via the Windows key and nothing would work. Instead, the cursor would change to the "loading" symbol and it would pretty much just doing nothing.
The first time that this happened, I was browsing the Internet and it comes if is stuck on "Waiting for Cache" or something so that probability, I then noticed the circle of rotation which shows a page loading also stopped and was then forced to manually restart because I couldn't even click on the Windows button. Another test I tried watching a video uploaded - it literally just stopped playing about 4 minutes. The screen is just stopped on a single image even if the pause button had not been pressed - try clicking on what anyone did not work (as usual).
I tried to restart it several times (I unfortunately had to use the power button) and he began to repeat each time. It would work for a few minutes before freezing completely (less opportunity to unnecessarily move the mouse around the screen). Sometimes a pop-up window would be above the bar saying that stains the 'Microsoft Windows application became unresponsive. Sometimes the taskbar then disappear and the laptop would be closed, but the end result is always the same.
I found that the same problem moved with the boot safe mode with networking, however there were a few noticeable slowdown. I downloaded and used many anti-viruses/malware to analyze my machine and I'm almost certain that there is nothing of the those on the computer (although in fairness, the scans have been so slow I could do before giving up only to about 20% on each). Other solutions, I tried included:
1. manually end tasks of high memory use via the Manager of
2. with the help of CCleaner for fix my registry in Mode safe
3. left the laptop shut down during the night in hope it would just set
4 disconnected everything from the laptop ports
5. rebooted via the reboot, shutdown and power buttons
I'm sure I tried other things as well, but I am quite limited in the fact that I can use the laptop for a few minutes before he decided to stop working. I really need the laptop for my studies and I would be absolutely in love if one of you could help me solve my problem.
Thanks in advance!
-Jordan
 
Original title: error: after about 5 minutes of work after booting, Windows 7 freezes completely

Hi JordanRidehalgh,

 

Thanks for posting in the Microsoft Community. It seems that you have a problem with Windows 7 gel. This can be very frustrating for you, and I appreciate the efforts you have put in. Let us work together as a team to get this number fixed.

 

We start with a few questions-

(1) that you get an error message or error code?

(2) did you install hardware or software on the computer before the show?

I would like more information about the issue.

 

Method 1-

I wish that you run anti-virus in Mode safe mode with networking using different antivirus software.

In addition, I'd download (download and install in Normal Mode) and execution (in Safe Mode) the online scanner.

http://www.Microsoft.com/security/scanner/en-us/default.aspx

Note: The antivirus will try to repair bad sectors on the hard drive damaged by viruses. All the data on these sectors may be lost.

Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

Make sure you get the computer back to Normal Mode after performing all the troubleshooting steps.

Method 2-

It is possible that a third-party application is causing the problem as the computer worked well in Mode without failure.

 

I recommend you perform the clean boot.

Placing the computer in a boot minimum state helps determine if third-party applications or startup items are causing the problem. You must perform the steps in the article-

How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135

Note: You must follow the step 3 of the article to return the computer to a Normal startup after you perform all the troubleshooting steps.

 

Check if the problem persists.

 

Method 3-

I would have you look at the article-

Crashes Windows or freezes

http://support.Microsoft.com/kb/2681286?WA=wsignin1.0#method52

Note: The antivirus will try to repair bad sectors on the hard drive damaged by viruses. All the data on these sectors may be lost.

 

We know if you need help. We will be happy to help you.

 

Thank you.

Tags: Windows

Similar Questions

  • BofA charge only mode WINDOWS safe - once in normal mode after that

    FF 36.0.4 B of A does not - just clocks. WINDOWS (7) starting in safe mode, it works just fine all right. In fact, return to normal WINDOWS, it will work 1 time. After nada as it just of clocks. Eventually it will show the error code: ssl_error_inappropriate_fallback_alert. Empty cache, restarting, nothing works. Any ideas?

    Thanks again for the reply - aid in this community is still pending. I solved the problem and it's weird. I went back with msconfig to get Bitdefender in the boot sequence and somehow, there was another instance of Bitdefender pointing to the same registry key - they were two identical execution orders. I'm at a loss as to how two arrived in the Startup tab. In any case, I just activated an and everything came back to life. Weird. Thanks again and this explains why other browsers were not able to connect either.

  • MacBook pro works well in safe mode but freezes in normal mode

    Now I'm in safe mode, but if I restart in normal mode. It freezes.

    I have chosen of all the startup items.

    I ran the diagnostic test suggested by Linc Davis report.

    Start time: 10:29:16 04/30/16

    Model identifier: MacBookPro11, 1

    The system version: OS X 10.11.4 (15E65)

    Kernel version: Darwin 15.4.0

    Start mode: security

    Integrity of system protection: enabled

    Since the starting time: 10 minutes

    FileVault: on

    Diagnostic reports

    2016-04-06 CudaDriveInstall crash

    2016-04-06 GoogleTalkPlugin crash

    2016-04-06 IMDPersistenceAgent crash x 2

    2016-04-06 ReportCrash crash

    2016-04-06 cloudd crash

    2016 04-06 com.apple.CommerceKit.TransactionService crash

    2016-04-06 recentsd x 5 accident

    2016 04-06 suggestd accident x 5

    Crash of Microsoft Error Reporting 2016-04-12

    2016 04-27 com.apple.WebKit.WebContent crash

    Journal

    30 Apr 09:13:45 init: error getting of PHY_MODE;  using MODE_UNKNOWN

    30 Apr 09:13:46 en0: antenna diversity (index = - 1) Configuration error.

    30 Apr 09:13:46 en0: configuration of error transmission antenna (index = - 1).

    30 Apr 09:48:26 launchd process [1]-l' system of limitation of disabling i/o level

    30 Apr 09:48:26 launchd process [1] disable the CPU - the system-wide limit

    30 Apr 09:53:06 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-83.40.3/AppleCredentialManager/AppleCredentialManager.cpp, line: 785

    30 Apr 09:53:12 IO80211ControllerMonitor::configureSubscriptions() cannot add the _controller subscriptionIO80211Controller::start is 0x30684b4c8b15bb07, the provider is 0x30684b4bcb530207

    30 Apr 09:53:12 init: error getting of PHY_MODE;  using MODE_UNKNOWN

    30 Apr 09:53:13 en0: antenna diversity (index = - 1) Configuration error.

    30 Apr 09:53:13 en0: configuration of error transmission antenna (index = - 1).

    30 AVR 10:16: 15 launchd process [1]-l' system of limitation of disabling i/o level

    30 AVR 10:16: 15 launchd process [1] disable the CPU - the system-wide limit

    30 AVR 10:17: 41 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-83.40.3/AppleCredentialManager/AppleCredentialManager.cpp, line: 785

    30 AVR 10:17: 47 IO80211ControllerMonitor::configureSubscriptions() cannot add the _controller subscriptionIO80211Controller::start is 0xaba80277a3767cd9, the provider is 0xaba80276e3f4a6d9

    30 AVR 10:17: 47 init: error getting of PHY_MODE;  using MODE_UNKNOWN

    30 AVR 10:17: 47 en0: antenna diversity (index = - 1) Configuration error.

    30 AVR 10:17: 47 en0: configuration of error transmission antenna (index = - 1).

    30 AVR 10:17: 51 SIOCPROTODETACH_IN6: error utun0 = 6

    30 AVR 10:19: 59 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-83.40.3/AppleCredentialManager/AppleCredentialManager.cpp, line: 785

    30 AVR 10:19: 59 jnl: b (1, 4): replay_journal: from: 16072192 to: 3949056 (joffset 0 x 19502000)

    30 AVR 10:19: 59 jnl: b (1, 4): rereading of newspaper.

    30 AVR 10:20: 05 IO80211ControllerMonitor::configureSubscriptions() cannot add the _controller subscriptionIO80211Controller::start is 0x79b5767eccf49abf, the provider is 0x79b5767e0d328ebf

    30 AVR 10:20: 05 init: error getting of PHY_MODE;  using MODE_UNKNOWN

    30 AVR 10:20: 05 en0: antenna diversity (index = - 1) Configuration error.

    30 AVR 10:20: 05 en0: configuration of error transmission antenna (index = - 1).

    Demons

    com Apple.Installer.osmessagetracing

    launchd

    / System/Library/LaunchDaemons/com. Apple.Installer.osmessagetracing.plist

    -com.apple.installer.osmessagetracing

    / Library/LaunchAgents/com. Cisco.AnyConnect.gui.plist

    -com.cisco.anyconnect.gui

    / Library/LaunchAgents/com. Dell.Scan.Dell2155ColorMFP.ButtonListenerAgent.plist

    -com.dell.scan.Dell2155ColorMFP.ButtonListenerAgent

    /Library/LaunchAgents/com.Google.keystone.agent.plist

    -com.google.keystone.system.agent

    /Library/LaunchAgents/com.TeamViewer.TeamViewer.plist

    -com.teamviewer.teamviewer

    /Library/LaunchAgents/com.TeamViewer.teamviewer_desktop.plist

    -com.teamviewer.desktop

    /Library/LaunchDaemons/com.Adobe.fpsaud.plist

    -com.adobe.fpsaud

    / Library/LaunchDaemons/com. Apple.Installer.osmessagetracing.plist

    -com.apple.installer.osmessagetracing

    / Library/LaunchDaemons/com. Cisco.AnyConnect.vpnagentd.plist

    -com.cisco.anyconnect.vpnagentd

    /Library/LaunchDaemons/com.cudadrive.cudadrivesvcd.plist

    -com.cudadrive.cudadrivesvcd

    /Library/LaunchDaemons/com.Google.keystone.daemon.plist

    -com.google.keystone.daemon

    / Library/LaunchDaemons/com. Microsoft.Office.Licensing.Helper.plist

    -com.microsoft.office.licensing.helper

    /Library/LaunchDaemons/com.TeamViewer.helper.plist

    -com.teamviewer.Helper

    /Library/LaunchDaemons/com.TeamViewer.TeamViewer_Service.plist

    -com.teamviewer.service

    Library/LaunchAgents/com.citrixonline.GoToMeeting.G2MUpdate.plist

    -com.citrixonline.GoToMeeting.G2MUpdate

    Beams

    /System/Library/Extensions/JMicronATA.kext

    -com.jmicron.JMicronATA

    / / Library/Internet Plug-Ins/Flash Player.plugin

    S/O

    / Library/Internet Plug-Ins/googletalkbrowserplugin.plugin

    -com.google.googletalkbrowserplugin

    / Library/Internet Plug-Ins/o1dbrowserplugin.plugin

    -com.google.o1dbrowserplugin

    / / Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin

    -com.microsoft.sharepoint.browserplugin

    / / Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin

    -com.microsoft.sharepoint.webkitplugin

    / / Library/Internet Plug-Ins/Silverlight.plugin

    -com.microsoft.SilverlightPlugin

    / Library/PreferencePanes/Dell 2155 Color MFP.prefPane

    -com.dell.scan.Dell2155ColorMFP.prefPanel

    / Library/PreferencePanes/Flash Player.prefPane

    -com.adobe.flashplayerpreferences

    /Library/security/SecurityAgentPlugins/TeamViewerAuthPlugin.bundle

    -com.teamviewer.AuthorizationPlugin

    / Library/Widgets/Status Monitor.wdgt

    -com.dell.print.statusmonitor.widget

    Library/Address Book Plug-Ins/SkypeABDialer.bundle

    -com.skype.skypeabdialer

    Library/Address Book Plug-Ins/SkypeABSMS.bundle

    -com.skype.skypeabsms

    / Library/Internet Plug-Ins/CitrixOnlineWebDeploymentPlugin.plugin

    -com.citrixonline.mac.WebDeploymentPlugin

    Content of/etc/hosts

    127.0.0.1 localhost

    255.255.255.255 broadcasthost

    : 1 localhost

    Content of /etc/pf.conf

    scrub-anchor "com.apple / * '.

    NAT-anchor "com.apple / * '.

    RDR-anchor "com.apple / * '.

    dummynet-anchor "com.apple / * '.

    Anchor "com.apple / * '.

    load the "com.apple" anchor of "/ etc/pf.anchors/com.apple".

    Content of/etc/syslog.conf

    install.* @127.0.0.1:32376

    Content of /etc/pam.d/authorization

    Pam_krb5.so AUTH optional use_kcminit use_first_pass

    AUTH pam_ntlm.so optional use_first_pass

    AUTH required pam_opendirectory.so use_first_pass nullok

    account required pam_opendirectory.so

    Content of /etc/pam.d/checkpw

    AUTH required pam_opendirectory.so use_first_pass nullok

    account required pam_opendirectory.so no_check_home no_check_shell

    Content of /etc/pam.d/chkpasswd

    AUTH required pam_opendirectory.so

    account required pam_opendirectory.so

    password required pam_permit.so

    session required pam_permit.so

    Content of /etc/pam.d/cups

    AUTH required pam_opendirectory.so

    account required pam_permit.so

    password required pam_deny.so

    session required pam_permit.so

    Content of /etc/pam.d/ftpd

    AUTH required pam_opendirectory.so

    account required pam_permit.so

    password required pam_deny.so

    session required pam_permit.so

    Contents of /etc/pam.d/login

    Pam_krb5.so AUTH optional use_kcminit

    AUTH pam_ntlm.so optional try_first_pass

    AUTH pam_mount.so optional try_first_pass

    AUTH required pam_opendirectory.so try_first_pass

    account required pam_nologin.so

    account required pam_opendirectory.so

    pam_opendirectory.so password required

    session required pam_launchd.so

    session required pam_uwtmp.so

    session pam_mount.so in option

    Content of /etc/pam.d/login.term

    account required pam_nologin.so

    account required pam_opendirectory.so

    session required pam_uwtmp.so

    Content of /etc/pam.d/other

    AUTH required pam_deny.so

    pam_deny.so account required

    password required pam_deny.so

    session required pam_deny.so

    Content of /etc/pam.d/passwd

    AUTH required pam_permit.so

    account required pam_opendirectory.so

    pam_opendirectory.so password required

    session required pam_permit.so

    Content of /etc/pam.d/rshd

    AUTH required pam_permit.so

    account required pam_nologin.so

    account required pam_opendirectory.so

    session required pam_launchd.so

    Content of /etc/pam.d/screensaver

    Pam_krb5.so AUTH optional use_kcminit use_first_pass

    AUTH required pam_opendirectory.so use_first_pass nullok

    account required pam_opendirectory.so

    account sufficient pam_self.so

    Group accounts required pam_group.so no_warn = admin, wheel fail_safe

    account required pam_group.so no_warn deny group = admin, wheel ruser fail_safe

    Content of /etc/pam.d/smbd

    account of the sacl_service pam_sacl.so = allow_trustacct smb

    session required pam_permit.so

    Content of /etc/pam.d/sshd

    Pam_krb5.so AUTH optional use_kcminit

    AUTH pam_ntlm.so optional try_first_pass

    AUTH pam_mount.so optional try_first_pass

    AUTH required pam_opendirectory.so try_first_pass

    account required pam_nologin.so

    account of the sacl_service pam_sacl.so = ssh

    account required pam_opendirectory.so

    pam_opendirectory.so password required

    session required pam_launchd.so

    session pam_mount.so in option

    Content of /etc/pam.d/su

    AUTH sufficient pam_rootok.so

    AUTH required pam_opendirectory.so

    Group accounts required pam_group.so no_warn = admin, wheel tweak root_only fail_safe

    no_check_shell account required pam_opendirectory.so

    pam_opendirectory.so password required

    session required pam_launchd.so

    Content of /etc/pam.d/sudo

    AUTH required pam_opendirectory.so

    account required pam_permit.so

    password required pam_deny.so

    session required pam_permit.so

    Content of /etc/periodic/daily/110.clean-tmps

    If [r - etc/defaults/periodic.conf]

    then

    . /etc/defaults/periodic.conf

    source_periodic_confs

    FI

    case '$daily_clean_tmps_enable' in

    [AA] [Ee] [Ss])

    If [-z "$daily_clean_tmps_days"]

    then

    echo ' $daily_clean_tmps_enable is defined, but '.

    "$daily_clean_tmps_days is not.

    RC = 2

    on the other

    ECHO «»

    echo "deleting old temporary files:

    Set f noglob

    args = ""-atime $daily_clean_tmps_days - mtime + $daily_clean_tmps_days ""

    args = "${args} - ctime + $daily_clean_tmps_days.

    dargs = "- empty - mtime + $daily_clean_tmps_days"

    dargs = "${dargs}! "- name .vfs_rsrc_streams_."

    [n "$daily_clean_tmps_ignore"] & & {}

    args = "$args '" echo "${daily_clean_tmps_ignore %} ' |" ' "

    sed / [] [] * / ! -name/g "

    dargs = "$dargs '" echo "${daily_clean_tmps_ignore %} ' |" ' "

    sed / [] [] * / ! -name/g "

    .. .and 21 more line (s)

    Content of /etc/periodic/daily/130.clean-msgs

    If [r - etc/defaults/periodic.conf]

    then

    . /etc/defaults/periodic.conf

    source_periodic_confs

    FI

    case '$daily_clean_msgs_enable' in

    [AA] [Ee] [Ss])

    If [! d/var/msgs]

    then

    echo ' $daily_clean_msgs_enable has the value but msgs/var / ' \.

    "does not exist".

    RC = 2

    on the other

    ECHO «»

    echo "cleaning of the old ads system:

    [n '$daily_clean_msgs_days'] & &

    ARG =-${daily_clean_msgs_days #-} | ARG =

    GSM-c $arg & & rc = 0 | RC = 3

    FI;

    *) rc = 0;

    ESAC

    output $rc

    Content of /etc/periodic/daily/140.clean-rwho

    If [r - etc/defaults/periodic.conf]

    then

    . /etc/defaults/periodic.conf

    source_periodic_confs

    FI

    case '$daily_clean_rwho_enable' in

    [AA] [Ee] [Ss])

    If [-z "$daily_clean_rwho_days"]

    then

    echo ' $daily_clean_rwho_enable is activated but '.

    "$daily_clean_rwho_days is not defined.

    RC = 2

    Elif [! d/var/rwho(1)]

    then

    echo "$daily_clean_rwho_enable is enabled but/var/rwho(1)."------

    "does not exist".

    RC = 2

    on the other

    ECHO «»

    echo "deleting obsolete files in/var/rwho(1):

    case '$daily_clean_rwho_verbose' in

    [AA] [Ee] [Ss])

    print = -.

    *)

    print =;

    .. .and 14 more line (s)

    Content of /etc/periodic/daily/199.clean-fax

    If [r - etc/defaults/periodic.conf]

    then

    . /etc/defaults/periodic.conf

    source_periodic_confs

    FI

    If [/ var/spool/fax - d]; then

    ECHO «»

    echo "deleting files fax scratch."

    CD/var/spool/fax & & \

    To find. -type f-name ' [0-9] *. [0-9] [0-9] [0-9] "- mtime + 7 - delete > / dev/null 2 > & 1;"

    FI

    Content of /etc/periodic/daily/310.accounting

    If [r - etc/defaults/periodic.conf]

    then

    . /etc/defaults/periodic.conf

    source_periodic_confs

    FI

    case '$daily_accounting_enable' in

    [AA] [Ee] [Ss])

    If [!] ACCT - f]

    then

    echo '$daily_accounting_enable has the value but ACCT '.

    "does not exist".

    RC = 2

    Elif [-z "$daily_accounting_save"]

    then

    echo ' $daily_accounting_enable is defined, but '.

    "$daily_accounting_save is not.

    RC = 2

    on the other

    ECHO «»

    echo "accounting log rotation and collection of statistics:

    CD/var/account

    RC = 0

    n = $daily_accounting_save

    RM f ACCT. $ ACCT n.gz. $n || RC = 3

    m = $n

    .. .and 18 several line (s)

    Content of /etc/periodic/daily/400.status-disks

    If [r - etc/defaults/periodic.conf]

    then

    . /etc/defaults/periodic.conf

    source_periodic_confs

    FI

    case '$daily_status_disks_enable' in

    [AA] [Ee] [Ss])

    ECHO «»

    echo "record status:

    DF $daily_status_disks_df_flags & & rc = 1 | RC = 3

    ;;

    *) rc = 0;

    ESAC

    output $rc

    Content of /etc/periodic/daily/420.status-network

    If [r - etc/defaults/periodic.conf]

    then

    . /etc/defaults/periodic.conf

    source_periodic_confs

    FI

    case '$daily_status_network_enable' in

    [AA] [Ee] [Ss])

    ECHO «»

    echo "State of the network interface:

    case '$daily_status_network_usedns' in

    [AA] [Ee] [Ss])

    netstat-i & & rc = 0 | RC = 3;

    *)

    netstat - in & & rc = 0 | RC = 3;

    ESAC;

    *) rc = 0;

    ESAC

    output $rc

    Content of /etc/periodic/daily/430.status-rwho

    If [r - etc/defaults/periodic.conf]

    then

    . /etc/defaults/periodic.conf

    source_periodic_confs

    FI

    case '$daily_status_rwho_enable' in

    [AA] [Ee] [Ss])

    RWHO(1) = $(echo/var/rwho / *)

    If [f ' ${rwho(1) % *} "]

    then

    ECHO «»

    echo "the system of Local network status:

    PROG = ruptime

    on the other

    ECHO «»

    echo "Local System State:

    PROG = running time

    FI

    RC = $($prog | tee/dev/stderr | wc-l)

    If [$?-eq 0]

    then

    [$rc - gt 1] & & rc = 1

    on the other

    RC = 3

    FI;

    .. .and 3 more lines

    Content of /etc/periodic/daily/999.local

    If [r - etc/defaults/periodic.conf]

    then

    . /etc/defaults/periodic.conf

    source_periodic_confs

    FI

    RC = 0

    script in $daily_local

    do

    echo "

    case '$script' in

    /*)

    If [f "$script"]

    then

    echo "Running $script:

    sh $script | RC = 3

    on the other

    echo "$script: no file.

    [$rc - lt 2] & & CR = 2

    FI;

    *)

    echo "$script: not an absolute path.

    [$rc - lt 2] & & CR = 2;

    ESAC

    fact

    output $rc

    Content of /etc/periodic/monthly/199.rotate-fax

    If [r - etc/defaults/periodic.conf]

    then

    . /etc/defaults/periodic.conf

    source_periodic_confs

    FI

    ECHO «»

    printf %s "rotation of the fax log files:

    CD/var/log/fax

    I'm in * .log; do

    If [f ' ${i} "]; then

    echo-n "$i".

    If [x - / usr/bin/gzip]; then gzext = ".gz". else gzext =""; FI

    If [f ' ${i} $.3 {gzext} "]; then mv-f "${i} $.3 {gzext}" "${i}.4$ {gzext}"; FI

    If [f ' ${i} $.2 {gzext} "]; then mv-f "${i} $.2 {gzext}" "${i} $.3 {gzext}"; FI

    If [f ' ${i}.1$ {gzext} "]; then mv-f "${i}.1$ {gzext}" "${i} $.2 {gzext}"; FI

    If [f ' ${i}.0$ {gzext} "]; then mv-f "${i}.0$ {gzext}" "${i}.1$ {gzext}"; FI

    If [f ' ${i} "]; then mv-f "${i}" "${i}.0" & & if [x - / usr/bin/gzip]; then gzip-9 "${i}.0. DIY FI

    Touch "${i}" & & chmod 640 ' ${i} "& & chown root: admin" ${i} ".

    FI

    fact

    ECHO «»

    Content of /etc/periodic/monthly/200.accounting

    If [r - etc/defaults/periodic.conf]

    then

    . /etc/defaults/periodic.conf

    source_periodic_confs

    FI

    oldmask = $(umask)

    umask 066

    case '$monthly_accounting_enable' in

    [AA] [Ee] [Ss])

    W = / var/log/wtmp

    RC = 0

    Remove = NO

    If [$rc - eq 0]

    then

    ECHO «»

    echo "doing the accounting of connection:

    RC = $(ac-p |) Sort - nr k 2 | Tee/dev/stderr. WC - l)

    [$rc - gt 0] & & rc = 1

    FI

    [$remove = YES] & & rm-f $W.0;

    *) rc = 0;

    ESAC

    umask $oldmask

    output $rc

    Content of /etc/periodic/monthly/999.local

    If [r - etc/defaults/periodic.conf]

    then

    . /etc/defaults/periodic.conf

    source_periodic_confs

    FI

    RC = 0

    script in $monthly_local

    do

    echo "

    case '$script' in

    /*)

    If [f "$script"]

    then

    echo "Running $script:

    sh $script | RC = 3

    on the other

    echo "$script: no file.

    [$rc - lt 2] & & CR = 2

    FI;

    *)

    echo "$script: not an absolute path.

    [$rc - lt 2] & & CR = 2;

    ESAC

    fact

    output $rc

    Content of /etc/periodic/weekly/320.whatis

    If [r - etc/defaults/periodic.conf]

    then

    . /etc/defaults/periodic.conf

    source_periodic_confs

    FI

    case '$weekly_whatis_enable' in

    [AA] [Ee] [Ss])

    ECHO «»

    echo "reconstruction whatis database:

    MANPATH ='/ usr/bin/manpath - q'

    If [$? = 0]

    then

    If [-z "${MANPATH}"]

    then

    echo "manpath impossible to find directories manpage.

    RC = 3

    on the other

    RC = 0

    /usr/libexec/makewhatis.local "${MANPATH}" | RC = 3

    If [X "${man_locales}"! = X]

    then

    I'm in ${man_locales}

    do

    LC_ALL = $i /usr/libexec/makewhatis.local - a------.

    -L "${MANPATH}" | RC = 3

    .. .and 9 more line (s)

    Content of /etc/periodic/weekly/999.local

    If [r - etc/defaults/periodic.conf]

    then

    . /etc/defaults/periodic.conf

    source_periodic_confs

    FI

    RC = 0

    script in $weekly_local

    do

    echo "

    case '$script' in

    /*)

    If [f "$script"]

    then

    echo "Running $script:

    sh $script | RC = 3

    on the other

    echo "$script: no file.

    [$rc - lt 2] & & CR = 2

    FI;

    *)

    echo "$script: not an absolute path.

    [$rc - lt 2] & & CR = 2;

    ESAC

    fact

    output $rc

    Contents of the /Library/Preferences/com.apple.security.appsandbox.plist (text of XML document)

    <? XML version = "1.0" encoding = "UTF-8"? >

    <! DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0 / / IN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd" > ""

    < plist version = "1.0" >

    < dict >

    < key > UnrestrictSpotlightContainerScope < / key >

    < true / >

    < / dict >

    < / plist >

    Contents of the /Library/Preferences/SystemConfiguration/com.apple.Boot.plist (text of XML document)

    <? XML version = "1.0" encoding = "UTF-8"? >

    <! DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0 / / IN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd" > ""

    < plist version = "1.0" >

    < dict >

    Flags kernel < key > < / key >

    < string > < / string >

    < / dict >

    < / plist >

    Featured: indexing and search disabled

    Firewall: on

    Small files: 43

    Time elapsed (s): 272

    If it works in Mode safe, look in system preferences > users and groups > login items and delete items from opening of any third party. Also look in Library/StartupItems. Nothing is put in this folder by default, so something in here belongs to you. Then log out and back in or restart and test.

  • Windows does not start in normal mode after the Trend Micro update a few days ago. I can only work in safe mode. Whenever it freezes in normal mode just after typing my password. Help, please.

    Trend Micro update

    If the information below does not help, contact Trend Micro because it is their product that caused the problem:

    http://eSupport.trendmicro.com/default.aspx

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

     

    If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use it.

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    See you soon.

    Mick Murphy - Microsoft partner

  • Satellite Pro A300 - freezes in normal mode

    Before proceeding, I would like to say that I am not an expert in computers. All of these technological terms is not really make sense to me.

    -----------------------------------------
    Hello.

    I am currently typing this on Mode safe as if I start Windows normally, the laptop would just freeze and will not respond. It would take 5 minutes at startup, so if you try to access a program it would just stop respond and it freezes just after a while.

    It is a bad time to lose the laptop my sister is doing a course in order to obtain a qualification in childcare. The laptop is virtually indispensable.

    Thank you
    Shivam.

    Hello!

    It s really strange to say, what's the reason for this.
    I think it must be a driver or a software problem, why Windows works in safe mode, because safe mode driver will not be loaded.
    , You update an application driver or software? Maybe you have a virus on the computer

    I think that the easiest way is you backup all important files to for example external HARD disk and start to reinstall Windows using the Toshiba recovery disc.
    If you have Windows Vista preinstalled, you can use HARD drive recovery. Go to the advanced boot menu (F8), choose repair my computer and select the recovery Toshiba feature. Follow the instructions on the screen.
    If you n t have Vista you can also use the Toshiba recovery disc.

    Good bye

  • Windows Vista freezing, problems starting mode safe mode, Windows Update does not work, etc.

    Hi all. I am operating Windows Vista Home Premium Service Pack 1, 32-bit on an HP Pavilion dv6000.

    My problems started about two months ago, when I installed several updates through Windows Update. I started having problems with my USB ports (even if these pilots were not being updated) and the computer was never able to close successfully. I tried to uninstall these updates, but that did not fix the questions I had. I have also installed software (AutoCAD 2007) at the same time and uninstalled, nothing helps.

    Then my computer started to freeze after running for a few minutes. Time seems to vary from 5 minutes of good use for 1 hour, but I found that it works only because this so long, I only open a program or file and use it all the time (for example, reading a book in Adobe Acrobat format). If I try to open the program or additional files, go to control panel, etc. (read: if I do everything related to Windows Explorer) the computer crashes. I can still move my cursor but none of the windows meet, and I can't ctrl + alt + delete to enter the Task Manager (I get a black screen).

    I was manually shut down my computer every time that happens and boot in SafeMode several times. Sometimes when I try to start safe mode it is hampering the crcdisk file and turns off. It happens not every time, however. Sometimes, when it starts it running the disk check, and there has been some index files that it has been deleted and orphaned files that it has been moved.

    I tried to do a system restore to a point before the updates I've installed in October, but my computer has no points system, restore even if he says it was their creation before you install these updates.

    The last problem is that when I go to Windows Update, it says that I have never checked for or downloaded the updates in the 15 months that I've had the computer - is not true, I, he lost at the time of all the record of it. So although I would like to provide you with wonderful with a record of what I've updated and people uninstalled, I can't because all this information is gone. In addition, I can't connect to the internet to try to check the news updates, because our internet service runs a USB modem, which is not communicating properly with my computer.

    I hope someone has an idea of what's going on. I just can't understand the common point that all these questions arise, my technology skills are somewhat limited, so I hope for a relatively easy solution.

    Sarah

    BTW, all my files were backed up on external drives.

    I don't know Jack about computers, but I don't know that I went through almost exactly the same thing.  My pc was ok, then in a month or two, it took a nose dive.  something I did was too that much could not think of everything.  A friend told me to reset my bios to default settings and see what happens.  After having spent only 7 hours trying to teach myself on bios, I got stabbed in this area and it worked.  Everything is great runnng.  Now I can even right click on icons without crashing.

  • My Windows XP PC is so slow that I can't use it on Normal Mode.

    My PC Windows XP has slowed down to the point wjere, it is unusable when I start in Normal Mode.  It is slow to start and slow to open a session, it will freeze in Normal Mode and I have to close it using the PC switch.  I was running and trying to solve the problems in Mode safe mode with networking.  I need advice.

    Thank you.

    Try this link for mntce xp, it should help the pc.

    http://support.Microsoft.com/kb/959060

  • Start normal mode after windows xp bar charge it gives black screen and in safe mode it gives blue screen

    Victorinox original title: Black scree & blue screen...

    So my laptop that is running Windows xp, start in normal mode after windows xp bar charge it gives black screen and it stays like this, and in safe mode it gives blue screen, what can I do? I need your help atleast to save the files to my hard drive...

    Hello

    · What is the error code or error message that you receive when the computer starts in safe mode?

    · Were there any changes made on the computer before the show?

    · What is the number and the model of the computer?

    · Who is the service pack installed?

    Try the methods below:

    Method 1: Disconnect all the devices connected to the computer such as printers, scanners or USB hard drives and restart the computer and check if that helps.

    Method 2:

    Try to start your computer in last known good configuration. You can check the link for the procedure: how to start your computer by using last good known Windows XP Configuration: http://support.microsoft.com/kb/307852

    Method 3:

    You can follow the steps listed in the link: after the Windows Logo appears, or after you log on Windows, a Windows XP computer can display the wallpaper, a black screen or a blue screen: http://support.microsoft.com/kb/318027

  • Cannot start the Toshiba Satellite A300 in normal mode or safe mode.

    Original title: Normal and safe mode start two taped please wait

    Hi my problems started last night when I tried to open my laptop (Toshiba Satellite A300 Windows Vista)

    In normal mode starts near the top of the screen loads fine up please wait...
    I left on until this morning that then the screen turned black and nothing was clickable.
    I can't boot mode safe either, as it happens the same thing.
    Sometimes when I try and start it tells me that the C drive has something wrong with it and what are the fixing.
    A warning saying that this file is corrupted and unreadable left me with a scintillating display that fluctuated between black and the background of vista.
    I managed to log on once while my office quickly froze and I had to close my laptop.

    Startup Repair cannot detect all problems. I restore Windows to an earlier date with the system restore but that did nothing to help and when I tried to restore the system to an earlier date of even the sign of a catastrophic failure rises.

    I'm really ideas outside the restoration of factory settings.
    Someone please help.
    Thank you

    Hello


    Have you tried another recovery option?
     

    I suggest you to press the F8 key as the computer starts up to the top and check the option in the advanced boot menu.
     

    Advanced, including safe mode startup options
     
     

    If you are able to open the advanced boot menu then you can execute the menu command prompt and type the command and check.
     

    Type CHKDSK c:/r or

    Type CHKDSK c:/f
     

    Important: even if running chkdsk on the drive if any bad sectors are found, chkdsk attempts to repair this sector and if all data on this sector it could get lost.
     

    If you are not able to perform the steps then you may need to get the Vista installation DVD. You can contact the manufacturer for more details.
  • Windows Vista Basic has been freezing after sitting idle in normal mode and safe mode.

    Windows Vista Basic and was freezing after sitting idle in normal mode and safe mode. A few months ago, we had this problem and I replaced the hard drive. It was fine for a bit, but is distributed upward. The time that it will sit idle are shortened. I did a scan for malware and removed everything that was out there, obviously this isn't the hard drive and it is used for the most part just internet and e-mail, no new programs have been loaded since the new hard drive.

    original title: my laptop is running Freezin' upward...

    Hello

     
    I would ask through you the following method and the Coachman.
     
    Method 1:
     
    Method 2: You can restore the system to a system restore point when the computer was working fine.
    The system restore.
     
    You can also check:
    Optimize Windows Vista for better performance.
    http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance
  • Windows Vista works in safe mode but not in normal mode. Desktop freezes and cannot go to the Task Manager

    My laptop (Dell Inspiron; Windows Vista Home premium 32 bit) works on safe mode and safe mode with n/w mode. When I try to boot into normal mode, it comes to the screen asking my password. You can enter the password. Then, it loads the screen saver and freezes. I see a green circle turning. He never stops. I tried ctrl + alt + delete. It does not work. I did repair the system. No use. I tried the system restore. It shows a file as OS (C :) and another as recovery (x :). I chose the recovery (x :) as file control. He has worked and showed a message like system restore successfully in safe mode. But the normal mode of sill is freezing after the password screen.

    Hello

    • All changes made on your computer prior to this question?
    • You have an antivirus installed on your computer?

    To perform a clean boot on a computer that is running Windows Vista, follow these steps.

    1. click on start, type msconfig in the search box and press ENTER.

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    2. in the general tab, click Selective startup.

    3. under Selective startup, clear the check box load startup items.

    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

    5. click on OK.

    6. When you are prompted, click on restart.

    7. after starting the computer, reinstall and run the program and see if the problem is resolved.

    Check if you have the same problem... If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.

    http://support.Microsoft.com/kb/331796

    To restore your computer to a Normal startup mode, follow these steps.

    1. click on start in the box start the search.

    2. type msconfig and press ENTER.

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    3. click on the general tab.

    4. click on Normal Startup - load all device drivers and services and then click OK.

    5. When you are prompted, click on restart to restart the computer.

    Also try running a Virus scan using a live care online utility.

    http://OneCare.live.com/site/en-us/default.htm

    http://www.Microsoft.com/Security_Essentials/

    Follow the steps mentioned in the link below

    How to get rid of malware.

    http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

    Let us know if this helps

    Concerning
    Anthony.

  • Windows 7 freezes on the splash screen of Windows - in Recovery Mode, start DVD, Normal start, etc.

    Having a 64 bit Wondows 7 Home Premium on an HP Omni 120-1123w.  It freezes at normal boot and safe mode boot startup.  Get the "Windows is loading files', as the horizontal bar fills from left to right. When the bar is full the screen goes black for a second, then the phrase "Start window" will appear.  And that's all.  No converging balls.  It does the same thing if I boot from a DVD (once I get the message while pressing any key to boot from the disk).   He did the same thing when I boot from a USB flash on which I have installed Windows 7.  He even did the same thing when I hit escape to the Start Menu and press F11 for recovery of the system.

    I try to save anything on the PC.  Obviously something is damaged somewhere.  I don't know where.  I set the BIOS to default level.   I used the start menu F2 to run diagnostics.

    • CPU Test - passed
    • Connection hard drive test - passed
    • Start - passed test
    • S.M.A.R.T test - passed
    • Memory test - passed

    I then ran a sort of HARD drive test in BIOS called a DPS Self Test.   He ran for a long time, but finally passed.
    When the screen freezes, all devices lose power.  All the lights on the keyboard turns off.  If I boot from a flash drive, the flash player will Dim.

    Hello! It seems that you do every thing right and diagnostics of material seems good. IMHO you have a power supply problem or your mother Board has failed. Search

    bulging capacitors. A power supply can go wrong and get out your motherboard. Even if you have the side, turn, try to remove the RAM, using a stick at a time in different locations to see if you can start windows or load the operating system.

    Dokie!

  • Why my screen freezes or blue screen appears in normal mode but not safe modes?

    My monitor quivers at the start and in security mode. PC freezes or blue screen during normal mode but not in safe mode.

    Hello

    If it works, fine, safe mode, start your computer in a clean boot State to eliminate conflicts of third party software and check if the problem persists.

    Note: Follow step 7 to your computer as usual.

    In addition, follow the steps in this article.

    Resolve stop (blue screen) error in Windows 7

  • My pc freezes during a normal race, does not freeze in safe mode

    My computer crashes after the normal start time randomly I do nothing especially when it freezes. It seems to help if I constantly move the mouse so it doesn't freeze. I ran malware bytes and nothing was found, I also ran mcafee, norton, windows defender and malicious microsoft removal tool. I can run the pc in safe mode and mode safe mode with networking, but as soon as I run it in normal mode it freezes all the time. I'm at my wits end trying to fix can someone help plz

    No I have not used all anti-virus durning in the last two weeks to try to find a virus but have had no luck. I have run both antivirus software and uninstall it once I use it I am currently only running windows Defender

    If you care to try...

    In safe mode, create a new user account with EXACTLY the same privileges as the other.
    Reboot, logon to the account again in NORMAL mode. It freezes on you also?

    My point of view (speculation only): maybe your old user account is damaged.

    P.S. running with ONLY windows Defender may not a good idea. Install a good AV (anti-virus) program.  I do not make recommendations when it comes to AV.
    I'm very curious. You have used Norton and McAfee and uninstalled them. Don't you have to pay for them? They have trial versions?

    t-4-2

  • Windows 7 black screen with the cursor of the mouse in normal mode and safe

    Hi all
    I hope someone can help.
    Laptop downloaded updates and after the restart will only go to a black screen with the mobile mouse cursor.
    This occurs in safe mode, normal mode.
    I tried all variations of safe mode and still the same thing happens.
    Last known configuration does not solve. (i.e. no restoration or image to enter)
    Using the vista win7 dvd upgrade or a linux dvd and screen appears as you expect his obvious system is very good.
    I tried the options on ctrl alt del, ctrl shift esc etc etc, but I cannot go into Control Panel, or a any part of the win7 GUI.
    Best I can do is access via the command-line... any thoughts on how to fix?

    Hello

    Welcome to Microsoft Windows 7 answers Forum!

    You can try the following steps and check whether the problem is resolved.

    You can disconnect all external devices except the keyboard and mouse and check if you are able to boot to the desktop and check.

    I also recommend what to do the Startup Repair. Follow these steps:

    To perform a Startup Repair follow these steps:

    1. Insert the DVD of Windows 7 and restart the computer.

    2. when we are asked to press a key to boot from the DVD, please press enter or the SPACEBAR.

    3. choose your language settings, and then click Next.

    4. click on repair your computer.

    5. Select the operating system you want to repair, and then click Next.

    6. in the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem, and if necessary, it may restart your computer, because it makes the repairs.

    Access the link below for more information on the Startup Repair:

    http://windowshelp.Microsoft.com/Windows/en-us/help/5c59f8c1-b0d1-4F1A-AF55-74f3922f3f351033.mspx

    See also:

    http://social.answers.Microsoft.com/forums/en-us/w7install/thread/ab43493b-247C-427e-BA21-4950eea279ac

    http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/24b44a01-872e-4d87-867f-ed01a3579031/ for the black screen problem

    Thank you, and in what concerns:

    Suresh Kumar-Microsoft Support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for