WIndows 7 Home Premium 32-Bit and 64 - Bit

Similar Questions

• Firefox 4.0 is now compatible with the browser ZoneAlarm 1.5.260.0 and Windows Vista Home Premium, 64-bit Service Pack 2 system?

  Firefox 4.0 is now compatible with the browser ZoneAlarm 1.5.260.0 and Windows Vista Home Premium, 64-bit Service Pack 2 system? Earlier when checking for updates it had compatibility problems. These issues have been resolved for me operation secure with Firefox 4.0?

  According to the guru on the ZoneAlarm user forum, Firefox 4 and other new browsers won't be compatible with the new version of ZoneAlarm, releasing. See:

  • http://forums.zonelabs.com/showthread.php?t=76985 & highlight = Firefox

  "You must update the following plugin:

  • Adobe PDF plugin for Firefox and Netscape 8.2.6
  1. Check your plugin versions on one of the following links:
     • http://www.Mozilla.com/en-us/pluginCheck/
     • https://www-trunk.stage.Mozilla.com/en-us/pluginCheck/
     • Note: plugin check page lacks information about all versions of the plugin
  2. Update of Adobe Reader (PDF plugin):
     • Within your existing Adobe (If you have already installed) drive:
       • Open the Adobe Reader program in your list of programs
       • Click Help > check for updates
       • Follow the instructions to update
       • If this method works for you, go to the section "download full installer ' below and go to"after the installation"below
     • Download the full installer (If you have NOT installed Adobe Reader):
       • SAVE the installer to your hard drive (save to your desktop so that you can find it after downloading). Exit/close Firefox. Run the Setup program that you have just downloaded.
       • Use one of the links below:
         • https://support.Mozilla.com/en-us/KB/using+the+Adobe+Reader+plugin+with+Firefox (click on "Install and update of Adobe Reader")
         • See also the download link': http://get.adobe.com/reader/otherversions/
     • After installation, launch Firefox and recheck your version.

• driver ethernet controller and Windows 7 Home Premium 64 bit HP 110-3000 pci device driver missing

  I need the driver for ethernet controller and pci for Windows 7 Home Premium 64 bit device driver

  Someone please help

  PCI\VEN_10EC & DEV_8136 & SUBSYS_148A103C & REV_04
  PCI\VEN_10EC & DEV_8136 & SUBSYS_148A103C
  PCI\VEN_10EC & DEV_8136 & CC_020000
  PCI\VEN_10EC & DEV_8136 & CC_0200

  PCI\VEN_10EC & DEV_5288 & SUBSYS_148A103C & REV_01
  PCI\VEN_10EC & DEV_5288 & SUBSYS_148A103C
  PCI\VEN_10EC & DEV_5288 & CC_FF0000
  PCI\VEN_10EC & DEV_5288 & CC_FF00

  Hello

  Try the following:

  http://ftp.HP.com/pub/SoftPaq/sp49501-50000/sp49600.exe

  http://ftp.HP.com/pub/SoftPaq/sp48501-49000/sp48885.exe

  Kind regards

  DP - K

• Will be device drivers (printers, USB Hubs, router, wireless, etc.. wired routers) who currently works for Windows 2 K and XP (SP3) on Windows 7 Home Premium 64 bit?

  Old devices connect to computers with Windows 7 home premium 64-bit.

  Hi Eventers,

  Thank you for visiting Microsoft Answers.

  Access the link mentioned to check if your hardware is compatible with Windows7 below:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  You can also download and run the Windows 7 Upgrade Advisor to see if your computer is ready for Windows 7. It scans your hardware, devices, programs for known compatibility issues installed, you gives advice on how to fix any problems found and recommends what to do before upgrade you.

  Visit this link to download the Windows Upgrade Advisor:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15&displaylang=en

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows XP can't see shared files and folders on the system Windows 7 Home Premium 64-bit

  I have a wireless home network. When I got Windows 7 Home premium 32-bit on my desk - my XP laptop was able to share files and folders.

  Today, I upgraded my computer to Windows 7 Home Premium 64-bit
  Now - my Windows 7 Desktop can access files on my XP laptop - BUT - I was no longer able to access to any shared files and folders on the Windows 7 desktop. I checked that matches the name of working group. And on the XP - when I go to the Add Assistant preferred network and make a Browse.When I select Microsoft Windows network and task force - I see my office listed. But when I try to select - the OK button remains grayed out.
  I would appreciate your help on this.

  Thanks for your help - but I just found out the problem. In the advanced sharing settings, I forgot to select Enable turn off password protected sharing. The second I chose no-all the files and folders that I set to share on the Windows 7 system became available.

  Thanks for your help, anyway.

• Why can not download and install updates from Windows Vista Home Premium 32 bit?

  Why can not download and install updates from Windows Vista Home Premium 32 bit?

  Premium Vista Dell is actually not even install vista SP1, therefore, no update. In case of doubt, go to run, or cmd, type:

  WinVer the OS details appear. If no SP1, download & install it

  https://TechNet.Microsoft.com/en-us/library/cc749419 (v = ws.10) .aspx

  Use this link for download.

  http://catalog.update.Microsoft.com/v7/site/search.aspx?q=Windows%20Vista

  This link allows you to get updates from vista through the windows update catalog, once running, search the installation 'Active X'

  Microsoft.

• I have Windows Vista Home Premium 32 bit and I get this "TCP/IP ping command has stopped working" how to fix this?

  I have Windows Vista Home Premium 32 bit and I get this pop windows window advising me "TCP/IP Ping command has stopped working". I click on "check online for a solution", but there is no charge and disappear. I still have the problem, and it's very irritating. How can I remedy outside junking my Tower and buy another?  Thanks for any help on this.

  Hello

  1 did you change on your computer before this problem?

  2. when exactly you receive error message?

  You can follow the methods and see if it helps.

  Method 1
  Use the PING command to verify that TCP/IP is working properly. To do this, ping the loopback address (127.0.0.1) by typing the following command at a command prompt:
  (a) click Start .
  (b) in the search box type command prompt.
  (c) right-click and select run as administrator of .
  (d) type ping 127.0.0.1 and ENTRY.
  If you receive the response of 127.0.0.1, it means that TCP/IP is configured correctly.

  Method 2
  Check to see if the problem exists in safe mode with network.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 3:

  Alternatively, you can try to reset TCP/IP and then check if it helps:

  
  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357

  Method 4:

  I also suggest you to download and run the latest Microsoft Scanner on your computer and check to see if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• Uninstall Vista Home Premium 32 bit and Windows 7 Home Premium 64 Bit installation

  How do I format my C: so that I can install my new WIndows 7 Home Premium 64 bit?  My system is compatible for 64-bit.

  When I try to format C: my system does not allow because of the Vista OS.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  How to do a clean install with Windows 7

  http://social.answers.Microsoft.com/forums/en-us/w7install/threads

  "Download Windows 7 installed and activated on your PC."

  They will help you in the Windows 7 Forum at the above address.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 Home Premium 64 Bit and my DirectX diagnostic tool says that my current version is DirectX 11, but when I try to run space engineers, it tells me that I need to run DirectX 11

  * Original title: DirectX and space engineers

  Hello, I am running Windows 7 Home Premium 64 Bit and my diagnosis tool DirectX says that my current version is DirectX 11, but when I try to run space engineers and use a world with planets, he tells me that I need to run DirectX 11. When I go to my DirectX folder, it says that I am running DirectX 9.0, I'm very confused and internet only helped me at all up to this point. All suggestions/help and help will be greatly appreciated.

  Well, is it not a strange ball game? Minimum = DX9 and DX11 for planets.

  Looks like no shore leave for you then... :)

  "NOTE: the minimum requirements are enough to run the game, but without the global functions,

  which requires DirectX 11. »

  "When I go into my file DirectX it tells me that I'm running DirectX 9.0"

  Direct X folder?

  Win7 has DX9, 10 & 11. However, older graphics cards are not be able to use DX11 (or DX10 if old enough).

  It comes to graphics cards which are older than AMD HD 5000 (version ' 09) and Nvidia GTX 400 (exit 10) series.

  EDIT: This also applies to the older map HD4000 Intel integrated graphics (Inc., HD3000, and all the "GMA" graphic integrated).

  ----------------------

  -Here is a list of the .dll Direct X files you when files are updated.
  There are more files DX (Xinput and audio), but these are most of the graphs related to Direct X .dll

  Go to Windows / System 32 folder (and SysWOW64 if you have 64-bit).
  -They are in alphabetical order and begin by d3dx9_24.dll > 43. Then d3dx10 - 33 43 >
  . & Finally d3dx11 - 42 43 >.
  It should also be--d3d9, d3d10 and d3d11. These come before the D3Dcompilers - 33 > 43.

  If all of these files is missing update Direct X using the DX Web Installer.

  Download DirectX end-user Runtime Web Installer from the official Microsoft Download Center

  Sometimes, a file is corrupt (mainly by games always reinstall DX unnecessarily). I have this case

  DX must be reinstalled using the full DirectX redist (June 2010) -

  Download details - Microsoft Download Center - DirectX Redist (June 2010)

  .

• I got a message that my Windows 7 is not genuine. What steps to follow to format the hard drive and install Windows 7 Home Premium 64 Bit?

  I took my office for repairs after that my motherboard has given. I did an upgrade and the repairman had my re - installed Windows. I know evil to fix my Internet security software and discovered a list of other problems with missing or corrupt files. After inspecting my system, I discovered that the repairman installed Windows with a product key is counterfeit.

  I have my legitimate Windows 7 Home premium disc and product key. How to re - install Windows 7, because windows fitted by repairer are Home Premium 32 Bit, and Windows I have are Home Premium 64 Bit.
  I would like to do a full install of Windows, I backed up all my data and have all the product keys of software installed on my desktop. What steps to follow to format the hard drive and install Windows 7 Home Premium 64 Bit?

  Boot from the DVD 64 bit Windows 7

  To learn how to change your BIOS options to boot from the DVD drive, the following tutorial:

  http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  If you have problems, use the phone activation:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• After a clean install of windows 7 Home premium 64-bit, dvd will play not [scrambled] and computer is crashes sometimes and I have to force the reboot.

  I have windows 7 Home premium 64-bit, which has totally collapsed.  By mistake, I installed my operating system 32-bit vista on it.  I bought a new windows 7 Home premium operating system and installed.  I did a clean install after formatting the hard drive [the did twice].  Now dvd will play not [scrambled] and computer is crashes sometimes and I have to force the reboot.  I saw the reference to System 32 on restart options.  Help?

  Original title: operating system 32 and 64 bit

  Have you installed Windows 7 device drivers for your make and model. If this is not the case, then go to the support web site factory and download Windows 7 drivers to a folder on your PC and then first install the drivers for the card mother/chipset, followed by USB, SATA, LAN, Audio and all other pilots.

  Find the website of your computer manufacturer support.
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  How do you know if you have a 32 bit or bit 6 vrsion of Windows installed:

  http://support.Microsoft.com/kb/827218

  BIOS updates: you should check to see if there was one, or sometimes several updates BIOS for the motherboard. Read (if provided) which solves the update. Sometimes a newer BIOS update will fix the problem. Read the instructions on how to your BIOS update/flash very carefully and be more you understand the process. There is a risk of a bad flash/update occurs which can make your system unbootable.

  Also check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  J W Stuart: http://www.pagestart.com

• audio and video synchronization on a file in the library media player Windows 7 Home Premium 64-bit

  How can I synchronize audio and video on a file in the library media player Windows 7 Home Premium 64-bit
  video play about a second faster than the audio, the download is good, cause it works on another computer on a flash drive...
  

  How can I synchronize audio and video on a file in the library media player Windows 7 Home Premium 64-bit
  video play about a second faster than the audio, the download is good, cause it works on another computer on a flash drive...
  

  Set up a device to sync in Windows Media Player

  Sync manually in Windows Media Player

  Windows Media Player sync: frequently asked questions

• How display the date and the time in the taskbar on Windows 7 Home Premium 64 bit system?

  How display the date and the time in the taskbar on Windows 7 Home Premium 64 bit system?

  I already did it.  The time is displayed in the correct format, but I can't seem to view the date of

  Any other suggestions?

  Thank you

• More games and Windows 7 Home Premium 64-bit

  Hello Microsoft supports the team.

  I would like to play the older games like Dungeon Keeper2, Tomb Raider2 and Star Wars: the threat ghost on my Windows 7 Home Premium 64-bit. I tried to change the compatibility settings, and it does make a difference. If you could tell me about a good VM to use or something else, I would be gratefull, thank you.

  Kind regards.

  Jacques van Wyk

  For Dungeon Keeper 2, you can follow this guide, it can help.

  For Tomb Raider 2, I think I found something on this site, in any case I do not know if they have solved the problem (I'm Italian and I did not quite understand what they were doing), so try at your own risk.

  For Star Wars: The Phantom Menace tell him guide. (Possibly a 32-bit operating system, too)

  None of these reviews are officially supported and I have not test them, so continue at your own risk.
  Personally, I think that if you're someone who frequently use old video games (video games, you mentioned all have more than 10 years!), it would be more convenient to install Windows XP or at least Windows 7 32-bit (most of old video games was 16-bit: Windows 7 32 bit can handle most 16-bit applications in Windows 7 64 bit cannot) , or (even if it will affect the speed of the game) Windows 98 on a virtual machine (there are a lot of choises: Oracle VirtualBox, VMWare, Microsoft Virtual PC, etc...)

  Hope this helps, spero di essere stato of aiuto.

  Windows7RULES.

• Anytime Upgrade used to go on Windows 7 Home Premium 64 - bit for Windows 7 Professional and now my computer is slow

  I run:
  Windows 7 Professional 64-bit (used for Windows 7 Home Premium 64-bit)
  Intel Core i7 - 2600 k CPU @ 3.40 GHz 3.70 GHz
  32 GB of RAM
  Seagate Barracuda 1 TB GB 7200 RPM HARD drive
  AMD Radeon HD 6800 Series

  I used the Express upgrade from Windows 7 Home Premium 64 - bit Windows 7 Professional 64-bit because Premium had a limit of 16 GB of ram.
  He checked and installed correctly without error.
  The main reason I wanted to be rid of this limit was because I could not watch any stream of twitch.tv.
  The upgrade has fixed my ability to watch the twitch.tv stream, but he gave me a problem which was even worse.
  Now, my computer is really slow.

  It takes a little longer than before to start.  When it is completely initialized, however, it is not as slow.  The mouse has just had a bit of lag.
  As soon as I try to use any application, my computer is really slow.

  For example: I open Mozilla Firefox.  There is a delay on when I type.  The mouse really gets lag.  With even just a 2nd tab open almost triple the slowness.

  It also occurs in Skype.  I'll have a delay in typing, and it's just slow in general.
  It also occurs in video games.  In World of Warcraft, for example, I used to get the full 60 fps in an area populated with max graphics.  Now, I rarely go above 10 frames per second with low graphics in an uninhabited area.
  Finally, it also occurs in the videos.  Let's say that I have 2 tabs open in Firefox.  This would normally have me delay like crazy if I try to do things (move the mouse, switch tabs, etc.).  If one of these 2 tabs is YouTube, and I watch a video, it drags you only if I try to move my mouse or tabs.  If I move all of my mouse, he plays the close video very well.  Even with the rivers Twitch.tv, Own3d, etc..  He accuses only if I move my mouse etc.  Also, if I don't move my mouse, the audio gets too quirky.  It's a kind of dubstep/robot/static noise.

  I tried to fix it or to limit the things:

  • Updated drivers
  • sfc/scannow (no problem)
  • Safe mode with network (always gal)
  • Service disabled for ALL , including Windows services (always gal)
  • Registry cleaned using CCcleaner
  • Clean a bunch of different caches and tempfiles.
  • A run each utility troubleshooting of Windows on my computer (only found no problem)
  • Reset my IP/TCP
  • The event logs recorded, but anything too rare.
  • Verified resource monitor, but my CPU usage is fine.  He's even not higher than 30-40% on the worst of the LAG.  Memory is also very good. It is used to 3 GB with 28 GB free.

  I tried a lot of things, but I don't remember right now.  I will edit this post when I remember or try new things.

  Thank you for taking the time to read my post and, I hope, provide input!

  I can tell you that registry cleaners are snake oil.  They do not help much, and they can cause problems.  Have you checked Device Manager to see if there is everything! or? for all entries?  Using a wireless mouse?  If so, try a wired.  Also, right-click computer and click Properties to see if he uses all the memory.  A number of people have found that they must make adjustments to get to use all of a large amount of RAM.  Your motherboard have integrated graphics?  If she and the CPU card or graphics are active at the same time, they may have a conflict, then you may have to disable in the BIOS.  Search for conflicting IRQ in system information.  Click Start and type system information into the search window.  Click on the + sign next to the hardware resources, and then click IRQ.

  Check the system event log.  To make, click Start-> Control Panel-> administration-> event viewer tools.  Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  Good luck.