Windows 7 homebasic installation problem

Hello. my name is rohit and I brought hp Pavilion g6 1117tx on October 27, 2011 to udhampur (jammu and Kashmir, India), that he joined real win 7 Home Basic. After a few weeks due to a virus problem I formatted my drive c and install win 7 ultimate (pirated) on it, cause, I do not have the cd of win Home Basic 7. After 2 months I have win 7 Home Basic cd downloader and sterted installation on my computer laptop everything was fine for the first four steps IE. adaptation files, file extension, install updates, installation featurs then restart request system. After the SUST reboot, it shows an error and the abandoned facility...

I also went to the hp service center s & s computers jammu, j & k, India. him are also facing the same problem...

the major problem is any other windows installation perfectly on my system except win 7 Home Basic...

and I want my win 7 Home Basic back to my laptop because its 100% authentic and its product key is wwritten under my laptop so please help me to solve my problem please...

but I donot have any recovery dvd in built and the series was written below my laptop. And I just want ask u is my downloaded dvd going to work so completely, I format my hard drive and then install windows.

Tags: Notebooks

Similar Questions

  • Windows XP SP3 installation problem

    I have a HP Media Center edition (2002) with Service Pack 2 of Windows currently installed.  Microsoft has stopped support for effective SP2 online July 13, 2010.  When I try to upgrade to SP3 using automatic downloads or by going to the site to update for Microsoft, the installation does not complete.  The error code that keeps dislplaying is the error Code: 0 x 80070002.  I tried to use the help on the Microsoft Web site to correct this, but it still does not work.  Any information on how to solve this problem?  Thank you

    Try MSFixit for the problem, or do the steps manually according to your preference:

     

    http://support.Microsoft.com/kb/822798

    Just rename the file Catroot2 usually solves these issues, for me anyway. Restart and try again the file to network install of SP3.

  • Windows vista sp1 installation problem

    Hi, I downloaded windows vista sp1 and at the end of the installation, it fails and says pass (http://go.microsoft.com/fwlink/?LinkId=69157) that is not valid. My windows update cannot also instal or download it too. My laptop is a sony vgn-sz433N/B and I have this problem even after full recovery my pc. Please tell me what to do?

    Hi esakhani,

    Thanks for posting your question.

    Due to Windows Update, you can try running a Fixit tool from the link below:
    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058

    After you run the Fixit, in order to install Service Pack 1, you can follow the procedure:
    -Download and install the latest Windows Update Agent:
    http://support.Microsoft.com/kb/946928

    -Run the computer system preparation tool.
    http://support.Microsoft.com/kb/947821

    -Download the stand-alone package for the Service Pack 1 from the following link:
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=B0C7136D-5EBB-413B-89C9-CB3D06D12674&displaylang=en

    -Turn the computer in clean boot mode.
    Disabling/uninstalling security software installed on the computer, as appropriate.
    -Launch the installation of the stand-alone package of SP 1 to the clean boot.

    Let us know if that helps.

    Kind regards
    Clement Kumar.

    Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

  • Trying to update my Windows XP to Windows 7. Installation problems 0 x 80070017

    When I updated from Windows XP to Windows 7 that I meet problems.  During custom installation, I don't get the option to remove my hard drive, and when I update, he's stuck on "Expanding Windows Files (9%) ».  Then, when he abandoned "Windows cannot install required files.  The file may be corrupted or missing.  Make sure all files required for installation are available and restard the installation.  " Error code: 0 x 80070017"

    Any help would be great.

    If you bought the retail box version, control the media for fingerprints. Also try the other DVD to see if it causes errors.

    If you have downloaded the Windows 7. ISO file and then burn a new DVD (using quality DVD + RW media). Use the available slow burn speed.

    ImgBurn - in addition to supporting the creation of CD of. ISO files,
    It supports a wide range of image file formats, and it's free.
    (BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
    http://www.ImgBurn.com/

    Download and install burn ISO Gear (free):
    http://www.GearSoftware.com/gear-ISO-burn.php

    J W Stuart: http://www.pagestart.com

  • Code error 0x7E - the file 'autorun.dll' could not be loaded or is damaged. Setup cannot continue. Windows 7 Upgrade installation problem

    I tried to install Windows 7 Home Premium Upgrade, 32-bit version. My current system is an Intel iMac (later), with Windows XP - SP3 loaded as a virtual machine with Parallels Desktop 4.0 build 3848 (according to their website, it is supposed to support Windows 7).

    I allocated enough space RAM and HARD drive of the virtual machine to run Windows 7. No matter what I do, when I try to run setup.exe, I get the error message: "the file 'autorun.dll' could not be loaded or is corrupt. Setup cannot continue. Error code is [0x7E].

    The file 'autorun.dll' is present on the disk.

    I saw on the internet that other people have also had this problem, with or without Parallels Desktop, and get a replacement DVD of Windows 7 program made no difference to them. Nor is it an available answer, I've seen.

    My Windows 7 disc is new, so I was hoping that Microsoft could solve the problem for me?

    Thank you.



    OK, so, this response is a little late to come, but if you never solved...

    I just encountered the same problem - editing similar (Mac, Parallels 5 in my case, the SP3 of XP, MS Windows 7 Home Premium Upgrade) - you must make sure that the DVDROM drive hardware is mapped to "D:" on your XP installation. Thus on the Parallels Desktop menu go to devices, CD/DVD1 and make sure that all your actual DVD player is called is selected (should be the vertical entry in the menu) - not true CD/DVD. The reader should then start and auto run.
    I hope this helps...
  • OfficeJet 6500 E709A on new HP Desktop Windows 8.1 installation problems

    Hello

    I'm troubleshooting an issue on all new HP Envy Desktop from my father-in-law and its existing OfficeJet 6500 E709A.  It came with Windows pre-installed 8.0, and I ran Windows Update to apply all the necessary patches, which included the upgrade from PC to Windows 8.1.  His previous PC is a Dell Windows XP, but due to the end of LIFE of XP, he bought a new HP PC.  I had him download 64-bit Windows 8.1 for the printer on the HP site and it did not work properly.  I tried to uninstall using the uninstall on the HP support site and requiring a reboot.  We then tried to reinstall the software after the restart and he said that it was extracted files but did not say where they were extracted to.  The extract window goes away and then it's just sitting there and nothing else happened.  I also saw another method to install the printer through the computer to be scanned and then decide the best software and driver to use.  Who started working and then just sit there as well and did not finish.  I'm in and I normally don't have these types of issues, but for some reason any, that he's not well.  I also went to the Microsoft site to test hardware compatibility with Windows 8.0/8.1 and it said it was, but other people said that it is not based on their experiences.  I have tried everything I know and searched this forum and google for the answers and don't come up with anything.

    1. when the software is extraction, can you please tell me where this is extraction to (IE folder Temp, Windows, etc.)?

    2. the software and drivers are 10 22, 2012, is there new files that you can give?

    3 is this fully certified by HP printer to run on Windows 8.0/8.1?

    4. is there anything else I can try?  I think I saw a troubleshooting step when you install from the CD and then download the updated Support files or windows.  I don't remember what OS files were on the CD.  Since it is in another State, I do it via webex with him to control and do what I tell you him to do, it complicates things.

    Help, please!  This is frustrating me like him.

    Thank you

    Rob

    Hello

    First, enter the installation folder and delete all current software that could be partially installed.

    To access the installation folder, click R on your keyboard and the Windows logo keys. the Run dialog box is displayed.

    Type %temp%, and then click OK.

    Open the HP installation folder that begins with the characters in 7z, if there are several just open the most recent one.

    Open the Util folder, then select the CCC folder and run the Uninstall_L3.bat file.

    In the listed command line click on Enter and confirm a window of dialogue for the installation of multiple, don't forget to restart the PC once you will be prompted to do so.

    Proceed as follows, in my view, it should solve the problem described:

    1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Never select and confirm by clicking the button turn off.
    2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
    3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
    4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
    5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
    6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
    7 restart your PC
    8. run the installation file and check all difference.
    9. Once you have finished, remember to open McAfee and re-enable real-time scanning.

    Kind regards
    Shlomi

  • Windows XP SP2 installation problem

    I have windows sp pro and tried to install sp2 but I get a message that it is not possible since the installer of the language differs from Setup to update

    What should I do

    Please advice

    Hello
    • What language of Windows has been installed on your computer?
    • You try to download Service Pack 2 manually or through Windows update?
    If your Windows language is English, you can try to download Service pack 2 from this link:
     
    If this isn't in English, you can select your regional language and try to install it.
    See also:
  • Windows 7 RC installation problem - select the driver to install

    After that I chose the time & language, Keyboard Layout (the first step of the installation), then I got the message "no device drivers were found. Make sure that the installation media contains the correct drivers, and then click ok"on the screen"Select the driver to install"(which is the second stage of the installation).
    My computer is currently installed with Windows 7 Beta Build 7000. I intend to reinstall 7100 top.
    Previously, I have installed Windows 7 RC on another laptop Compaq, which means the ISO and DVD that I burn is fine.

    Hi stiucsib86,

    Thanks for posting on the Forum of answers.

    I am sure that you will have a clean install, if this isn't how you try.
    According to the material, you may need to install a driver for the hard drive to be recognized.

    If it is a computer that you created, you may want to check the documents provided with the device or check the manufacturers Web site, for more information about the installation of the player.

    If there is a selection of pre-designed OEM computer programs, you have a disk that came with it with the drivers for the hard disk.

    Please let us know if that helps.

    Chris
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Impossible to scan on OfficeJet 4500 G510n-z under 'Windows 7 starter' - installation problem?

    Recently bought OfficeJet 4500 G510n-z and installed the SW CD on laptop Toshiba running Windows 7 Starter - NOTE when installing the SW printer I have had only a single option enabled: "install the minimal SW.

    How and what SW that I need to install to enable support of the san on this laptop?

    FYI:-I also installed this same SW HP on the Windows XP laptop and I am able to scan documents to this computer (in this case, I believe that I chose to install it "Full SW" option that has been disabled during the installation of Windows 7 Starter.)

    Could you provide links and instructions for essences SW install to support scan on Widows 7 Starter function?

    Using the Starter edition, you can scan sing Windows Fax and Scan:

    Use one of the following methods to scan a document.
  • Windows Center 6 installation problem?

    I'm moving away from the Center unit and move to a windows system. Pretty simple right? not really

    I have a windows 2008 r2 which we install vcenter 6 on. DNS resolves properly, forward and back. example of

    Nslookup servera.mydomain.us-> 10.1.1.5

    Nslookup 10.1.1.5-> servera.mydomain.us

    When I install vcenter 6, I use the FQDN for the server name. Installation seems to be fine, but I can't access the web client. He's a page cannot be displayed error 404.

    If I uninstall and use the IP address instead of the FULL domain name, it works very well.

    If I use the domain name FULL on installation and try of the period of INQUIRY to get to the web client, I get the warning of the cert and then when I click on it, the full domain name but cannot display the page

    What is the url that shows when I click on the warning of the cert...

    https://ServerA.mydomain.us/WebSSO/Saml2/SSOSSL?RelyingPartyEntityId=aHR0cHM6Ly8xMC41MC4xLjQvdnNwaGVyZS1jbGllbnQvc2FtbC93...

    If anyone has any ideas? never met this on your installed before?

    Thank you all.

    Sorry - I should give some details of the configuration I do.

    Embedded Postgres

    Windows 2008 r2

    IPv6 disabled

    using vmware to self-signed cert

    Well... think that I thought about it. His settings of the proxy server. I disabled the and everything works perfectly. Thanks to the security team! Laughing out loud

    Thank you for taking the time to do this with me.

  • cf11 on windows 2003 R2 installation problem: Installer hangs

    Here are the steps I did:

    . Download the installation exe (ColdFusion_11_WWEJ_win.exe): 571 106 928 bytes

    . launch it-> nothing happen (I see in tasklanager activity of the CPU for a few seconds then nothing)

    . then I tried to open the archive with 7zip and I found two directories: windows and InstallerData

    . then I tried to run "windows\adobe_cf.exe" and I immediately got the message: 'cannot run LaunchAnywhere - error loading of Java VM Windows 2.

    My version of java is:

    Java version "1.7.0_55".

    Java (TM) SE Runtime Environment (build 1.7.0_55 - b14)

    The Client Java VM (build 24, 55 - b03, mixed mode, sharing)

    Thank you for your support.

    Stone.

    Hi Pierre,.

    Please try the following steps: -.

    1. launch the administrator command prompt.

    2. navigate to the location of the installation of ColdFusion 11 program.

    3. type the command as shown below in the command prompt and press enter

    4. the installer will launch. Please follow the steps on the screen more far.

    I hope this helps.

    Kind regards

    Anit Kumar

  • Installation problem w / 10 Windows on end 2015 27 "iMac retina

    I used boot camp and it installs windows 8.1 very well. When install updated to 10 from inside windows 8.1 windows or try a cleanup of 10 windows using boot camp, he gets at some point and I see a black screen and it does not go any further. Why Windows 8.1 installs fine, but not windows 10? I have the model with the hard disk of 1 TB in it.

    I have the same model as you, and I just spend the whole day trying to solve that, more than an hour on the phone with Apple support. Here's what I learned.

    Apple support agreed with me that the problem is most likely a bad display driver (AMD?) in the last set of drivers for Boot Camp. Unfortunately, Windows 10 compatibility for the end iMac to 2015 has been added only last month, so there would still be easily bugs in drivers. The result is that Windows is unable to turn on the display when the Boot Camp drivers are running, but cannot when the default system drivers are running. That's why we could still install Windows and boot to the desktop at the very first (until Boot Camp installed drivers).

    Support has also suggested that the new update of El Capitan 10.11.2 could contribute to the bug, but he was not sure about it.

    From my experience, the following will not solve the problem:

    • Reset the PRAM
    • Reinstalling Windows (bad drivers should I not get removed)
    • Using the Windows system restore
    • Install Parallels (you cannot yet touch the drivers)

    The only remaining thay of possible solutions have been discussed on the phone are:

    • Enter Windows 10 safe mode (very difficult, unless you hard reboot and reset the PRAM repeatedly) and uninstall the graphics card drivers or install the latest AMD drivers
    • Remove your Windows partition reinstall from scratch and refuse installing Boot Camp drivers when it comes to the top

    If you try one of these solutions, please let us know if it works.

    And if someone could tell me please how to guarantee to be able to boot in SafeMode Windows 10, it would be greatly appreciated. For the record, F8 and SHIFT + F8 are very likely to work.

  • Applications and updates Windows installation problems

    Original title: using windows vista Installer problems and having

    nothing will be installed on a disk and installs very few downloads, windows update tried to install the same 14 updates and they do not know how this can be corrected

    Hi DaroldMILLER,

    ·         Did you do changes on the computer before the show?

    ·         You get the error message?

    ·         What applications/programs you install?

    ·         You install updates?

    ·         You are able to install other updates successfully?

    Follow these methods.

    Problem installing programs and applications:

    Method 1: Follow the steps in the article.

    How to solve problems when you install or uninstall programs on a Windows computer

    Troubleshoot installing or uninstalling programs

     

    Problem installing Windows updates:

    Method 1: Temporarily disable the security software .

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

    Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

    http://www.Microsoft.com/downloads/en/default.aspx

    Method 4: Follow the steps in the article.

    How to reset the Windows Update components?

    You cannot install some programs or updates

  • problems installing Windows during the installation of adobe acrobat

    I tried to download Adobe Acrobat multiple times and it stops downloading saying that my "windows setup has a problem' and download needs to close?  Im not sure what is the windows installer.  Help, please!  I use vista 32 bit.

    Windows Installer - if you are unable to install programs in Windows, see the links below.

    Diagnose and resolve program install and uninstall problems automatically:

    http://support.Microsoft.com/mats/Program_Install_and_Uninstall

    Problems installing and uninstalling programs on Windows computers:

    http://support.Microsoft.com/kb/2438651

    How to use the System File Checker tool and the sfc/scannow to solve the lack or the system files corrupted on Windows Vista or Windows 7:

    http://support.Microsoft.com/kb/929833

  • Windows 7 installation problem

    I'm trying to install Windows 7 from an expansion of Seagate 2 to and have used http://bootableusb.net/make-bootable-external-hdd-install-windows-78/ to format it to install Windows 7.

    However my my problem is that whenever I try to start the installer, it will not from 0 percent and cancelled with an error: "Windows Setup could not reset the deployment engine. To install windows, restart the installation.

    External not worth it, unless you want to run the installer to replace C.  But you will always have a cleaner installation by removing all partitions during installation that requires the stick bootable or disc.

    Follow own reinstall Windows 7

Maybe you are looking for

  • How to remove a user name?

    I have user names that I use no more and I want to delete them. They appear on the login screen when I start to use my browser.

  • Forgotten password, but only have access to the secondary email

    Hello I tried to install Skype on mobile, I see that I forgot my Skype password. I still access to Skype from the mac app, which allows me to access the page count, but without the password, I can't change anything. The problem is that I lost access

  • Tecra M3 recovery DVD-ROM

    Hello I just bought a brand new M3 in Germany and unfortunately found out that the operating system and the restoration of DVD - ROM is both in German. I contacted the support hotline just to hear that, as I bought it in Germany I could only receive

  • Z500 unstable wifi

    Hello I bought my laptop Z500 in August and everything was fine until last week.Wifi is very unstable all the time. It's like cut at least 3 times in one minute.It certainly not the problem of the router cause other computers work perfectly well.

  • If you are sure that you have a keylogger program on your computer and essentials windows does not detect, what is the next best thing to do?

    I don't know that the keylogger software has been installed on my computer.  I want to remove it, but windows essential, detection of malicious software Microsoft windows tool is not found.  There must be a way to detect without exposing my pc for po