Windows 7 I can not find the right port for my Epson printer?

Similar Questions

• Can not find the right WLAN for T41 driver

  I tried all the drivers registered after that my auto system detects a driver intel causes even a BSoD

  Laptop is T41 2379-DJU.

  OS is XP SP3.

  All advice appreciated.

  Thank you

  n8inoldport, welcome to the forum,

  the wlan driver suitable for your system should be this one. Please ensure that you pay attention to older low installation on the site instructions.

  Hope this helps

• Manually reinstall Windows XP and can not find the product key.

  Manually reinstall Windows XP

  Manually reinstall Windows XP and can not find the product key.
  What to do to replace the product key.

  Where to find your product key
  You can find your Windows product key on the label supplied with the package provided with your copy of Windows. The label can also be on your computer case. Activation of the pairs with your computer, your product key.
  Lost or misplaced product key (certificate of authenticity)

  http://support.Microsoft.com/kb/824433

  How to get a replacement product key?

  To replace a Microsoft product key, you must contact Customer Support and Microsoft. To locate the phone number, visit the following Microsoft Web site:

  http://support.Microsoft.com/default.aspx?scid=fh; EN-US; CNTACTMS

   

  For more information on this topic, visit http://support.microsoft.com/kb/811224

• Can't find the right drivers for AMD processor or ACPI driver

  I have Windows 7 Home Premium 64-bit. Motherboard ASUS A85XM-A.

  The drivers are all wrong.

  This ACPI Driver Microsoft 6.1.7600.16385 driver is causing critical startup errors.

  Dual core AMD Trinity A4-5300 processor also has this driver.

  Display-AMD Radeon HD 7480d amd 12.105.00 driver this driver works fine.

  Realtek HD Audio Driver 6.0.1.7071 ASUS. This driver works fine.

  I can't find the right driver for the AMD processor or the right driver ACPI. I was on the ASUS sites several times,

  and do not know what I do.

  The keyboard and mouse are also Microsoft Drivers.

  The ACPI driver may be the most recent version, but it is not the cause of the slow boot.  If you want to know what the cause is to run a windows performance monitoring and use the boot configuration

  In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wiki

  If you have any questions do not hesitate to ask
  
  
  Please run the trace when you encounter the problem

• Portege M200: Can't find the right driver for the TouchPad

  Hello

  I have a problem with my Portege M200.

  Can't find the right driver for the TouchPad or a pencil,
  I read that it must be a Wacom Touchpad, but no driver I've tried has worked.

  I hope someone can give me a list of all the drivers that I need to use my pen on the screen!

  Thanks in advance.

  Chris

  Hello

  All the drivers are located on the European driver Toshiba page.
  Please check again.

  The touchpad needs an Alps Electric touchpad driver. It s is available on the page.
  In addition, you should the Tablet Pack (on the page too)
  This tablet PackMicrosoft Pack Microsoft Office XP for Tablet PC (Tablet Pack) allows you to write directly with your stylus in the documents of Office XP on your Tablet PC.

  By the way; You must use the pencil that was equipped with the Portege M200

  Welcome them

• Satellite L300 - 19N PSLB8E - can't find the right drivers for Vista 32 bit

  Hello

  After you have reinstalled vista 32 bit, I can't find the right drivers for: Satellite L300 - 19N PSLB8E-00V011DU

  -VGA adapter
  -Realtek RTL8101Family PCI fast ethernet
  -videocontroller
  -Controller SM

  Everyone?

  Thank you already!
  .

  Hello

  Go to the page European driver Toshiba because it is European model:
  http://EU.computers.Toshiba-Europe.com/-> support download &-> download drivers

  You will find all the drivers!

  Display VGA adapter driver
  Realtek RTL8101Family PCI fast Ethernet LAN card driver
  SM controller might be chipset driver or driver card reader

• Can not find the ACPI driver for windows 8.1 for g40 - 80

  I can't find the ACPI driver for lenovo g40-80. I tried the win10 version, but it did not work.

  Could someone kindly help?

  To get the ACPI driver for Windows 8.1, you will need to install OneKey Optimizer - link

• Can't find the right drivers for hp pavilion dv6700 vista 64-bit.

  I can't find the right drivers after redo the OS to even get it on the net I tried a little bit not yet good can someone show me were good are mainly chipset, the ethernet drivers

  Hello:

  If you have the model with an AMD processor, you use the nForce chipset driver below to install the coprocessor and ethernet driver...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-55781-1&cc=us&DLC=en&LC=en&OS=2100&product=3651454&sw_lang=

• With the help of VISA can not find the com port

  I use visa read but cannot find any com port in Windows 7.

  How can I find the com port in Windows 7?

  Windows 7 is not released. A version of LabVIEW for windows 7 is not released. A version of NI-VISA for windows 7 is not released. Wait until MS releases windows 7. Then wait tile view deleted OR made available versions of LabVIEW and NI-VISA that work with windows 7.

• Can not find the updated driver for Intel PRO Wireless LAN 2100 3B for R40

  I can't find the good updated software listed for my R40 on the Lenovo site. The Device Manager shows my card wireless as:
  Intel PRO Wireless LAN 2100 3B Mini PCI Adapter but I can not find the model listed in the update list.

  My R40 description is by Lenovo site is:
  Product: ThinkPad R40 2897 B4U
  Operating system: Windows XP

  Original description: P M 1.4 GHz, 256 MB RAM, 40 GB 4200 RPM drive HARD, XGA(1024x768) 15 TFT LCD, 32 MB ATI Radeon 7500, 24x10x24x/8 x CD-RW/DVD, Intel 802. 11B wireless (MPCI), Modem (CDC), 10/100 Ethernet (LOM), UltraNav, Secure Chip (TCPA), IEEE 1394, 8-cell Li-ion, WinXP Pro

  Lenovo driver update page, I have the following choices:

  Network: R40, R40e wireless
  (1) mini PCI driver of cisco Wireless LAN

  (2) high rate Wireless LAN Mini-PCI Adapter III
  Note: The models ThinkPad R40 2681, 2682, 2683

  (3) dual-Band 802.11ab and 802.11abg wireless LAN Mini PCI adapt

  (4) Intel PRO/Wireless LAN 2100 3B Mini PCI adapt
  Note: The models ThinkPad R40 2722, 2724 only, 2723

  My card is listed for models 2722 2723 and 2724 ONLY.

  Here is the direct link to the driver page http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-46024R40.

  Device Manager shows that I currently have the Intel of the installed driver version: 07/03/2003, version 1.1.5.0

  Can anyone help on what version of the software update I should use?

  Welcome to the forum!

  Here is your wireless driver:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-59438

  After you download it, make sure you unpack it in the following directory: C > drivers > win > Wlanint

  I hope this helps.

• can not find the download link for the file Windows XP SP3

  Hi all!

  I just hugging old comp with Windows XP. He has XP SP2. I can't get Windows Update to work without SP3, but I can't find a download link for SP3. Where should I look?

  Thank you

  Jon

  Too bad. Finally found the file. For others who need it, here is the link:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Hello

  Thanks for sharing the information. If you have other Windows-related issues, feel free to post in our forum.

• Satellite A30: Can not find the COM ports when trying to query the modem

  Hello.
  I have satellite A30 and I reinstall windows xp at home, but I can't find any com port whenever I try to query the modem the display hardware confilct, but in Device Manager no sign of error/confilct, I did everything what I can.
  Add the port,
  Add more then 1 port
  disable the printer port
  change the printer port
  Reinstall derver modem,
  In short, I've done everything I can. its always show (! yellow) mark.if I add the port and if I remove the port and there is no sign of error.
  If someone help me to solve this problem a little,
  regared.
  MGK.

  Post edited by: mghouskhan

  The modem uses a virtual com port. It s not a real port.
  I wonder why it usually happens after the installation of the new operating system, you must install drivers Toshiba together in the right order
  Installing the chipset utility is important

  The modem driver should do the work and you n t need to activate com ports
  Please choose the right side of the page of the Toshiba driver modem driver after installing the OS correctly. I think that's the key

• Can not find the management point for content in page editing mode

  Hi all

  I am a newbie in oracle weblogic portal and you want to use its content management. I could however not find the catalogue of management contained in the right-hand side of the search catalog pane when I was in edit page mode. In my view, there must be something wrong when I did the configuration of the repository creation Untility or WebCenter content.

  Can someone help me or point the key on me, thank you.

  Daniel

  Hello.

  You mix different products and concepts.

  Oracle WebLogic Portal. I assume you mean WebCenter portal.

  Make RCU you are only for creating schemas that use Oracle products.

  Summarizing the steps you have:

  -Install Oracle WebCenter content.

  -Install the SST to enable inline Portal-Content editing.

  -Add cookie-path to your portal in case being a portal application framework Application. With this he will not lose the current session.

  -Set up a repository in WebCenter Portal connection and mark it as primary connection.

  I hope jiri reference and this advice / a few steps away you will find the solution.

  Any other questions you are welcome to the WebCenter Portal world.

  Kind regards.

• Can not find the file init for the database instance

  I have installed Oracle 10 g under Linux CentOS, run netca to create listener.ora and tnsnames.ora files, then I run dbca to create the myodb database and orcl instance.
  
  
  
  Now when I run dbstart, in the boot log, that it is said that he could not find the file orcl example init. so that the database myodb, he says:
  
  < em > / oracle/product/10.2.0/db_1/bin/dbstart: database instance "myodb' hot began.
  
  
  
  
  
  < /em > my questions:
  
  
  
  1. why it is said when I run dbstart both myodb & orcl are instances of database, I created myodb as the General database, while orcl corresponds to the instance, here it says:
  
  instance of < em > data treatment "orcl": journal file /oracle/product/10.2.0/db_1/startup.log
  
  Database instance "myodb' of treatment: save the /oracle/product/10.2.0/db_1/startup.log file
  
  
  
  < /em > is the name of the General database is considered an instance itself and can be used alternatively with the instance of word?
  
  
  
  2 when I created the database using dbca, I made the password for users of SYSTEM & SYS.
  
  
  
  When I try to connect to sqlplus using the system/mypassword, here it says:
  
  
  
  < strong > < em > ORA-01034: ORACLE is not available
  
  ORA-27101: shared memory realm does not exist
  
  Linux error: 2: no such file or directory < /em > < / strong >
  
  
  
  3. the database myodb started but it is not mentioned in my tnsnames file or the listener, while one mentioned is orcl has not begun, how is it? I know I'm missing a dir for /orcl in/oracle/home/admin, something that we find for the myodb, where there is/oracle/home/admin/myodb/pfile/init file.
  
  
  
  How can I fix this?
  
  
  
  4. What is the use of the command sql, < strong > edit < facilities > system registry, told me in another thread to connect to an idle instance with sqlplus and run this command, here what I got:
  
  
  
  < em > ERROR on line 1:
  
  ORA-01034: ORACLE not available
  
  
  
  < /em > 5 - can I just rely on the name of the General database and forget the thing of the Forum? I'm just confused about the difference and do not know how the orcl instance was created, it has not been created with dbca, because when I run dbca he says it's already there, create another instance, so I commented the sid parameter and now I amn't during its creation and how to retrieve its files if I need to re - create it again.
  
  
  
  Note: it is located in the bash_profile as $ORACLE_SID = orcl, why it's the only game, while General MYODB database name is not set, can be there rather than on the instance or SID in the bash_profile?
  
  
  
  
  
  Sorry for the many questions, this is the thing of the instance and their related discipline, I appreciate your help.
  
  
  
  Thanks in advance.
  
  
  
  
  

  If you have only 1 instance "orcl" then the oratab file should have only 1 entry - only for "orcl". Along, only one instance "myodb" {with the db_name "myodb"} must be started.
  The database Instance is identified by the SID - IE the ORACLE_SID.

  Normally, the SID and DB_NAME are the same - and they do like default value is the same when you run dbca. You have changed probably manually the db_name in dbca.

  If the listener is running on port 1521 and is started before the database instance, the database instance automatically saves with the listener. If the listener is started after the database instance, and then the command 'ALTER SYSTEM REGISTER' in the database instance indicates PMON to register with the listener.
  If you do not want to depend on the automatic check of the database with the listener instance, then you can include the information database (SID!) in the listener.ora. In addition, which would be caused if the listener is not on the default port 1521.

  See my posting in this thread: oracle sid and database the name of for more notes.

  A database can contain multiple schemas - each schema is a different database account. In other implementations of database (non-Oracle), what is called a "database", it is called a 'plan' in Oracle - but that is created as a database account. Database accounts are listed in DBA_USERS - if a user "owns" objects, it's a 'plan', otherwise, it is only a user. {Oracle also provides a CREATE SCHEMA command to create multiple objects in a single command.}

  Hemant K Collette
  http://hemantoracledba.blogspot.com

  Published by: Hemant K grapple on November 6, 2008 09:31
  corrected "orcl" to "myodb.

• Can not find the driver WIFI for Satellite M70-157

  I have a Toshiba Satellite M70 and that you can not download the driver on the main page.
  7.6.0.130.0 atheros, which is the name of the driver that I can not load.
  is it somewhere one another which would be better or I need exactly this?

  I thank the help
  Mogul

  I can see the WLAN page is currently down and unfortunately not available. Maybe Toshiba has to make a server maintenance.
  Try tomorrow or next few days access to the http://aps2.toshiba-tro.de/wlan/

  Good bye