Windows 7 installation problem - I can not load the disc of windows 7 for

I can't get windows disk to load 7. I am trying to run the full version on top of XP.
When I open my computer, always open the D drive then its empty. Any ideas?

ETA, I try to install the 32 bit one

I have an answer!

At least, it worked for me tonight, and I pray it works out for others in this situation.

I got exactly the same problem as you, except that I wanted to replace Vista with a clean install of Windows 7 on a computer of the 32-bit system IE.  But, like you, it just has not been grateful that there is a disc in there after that many 'click' would say tell me to insert a disc or that there was a disk failure.  I have since bought nine from a retailer, and was not very impressed and nor am I impressed by the response from Microsoft about this problem and must send them a letter expressing my displeasure.  Issues such as this must be properly studied and perhaps added to the 'specifications' of the software to warn buyers to potential problems of certain brands or models of PC.  In my opinion be told to get off the USB drive with a process that most of the audience would find almost impossible to understand and follow and with the many added costs of having to buy a portable hard drive, large enough DVD or USB drive is unacceptable, as far as Windows 7 is not an item to purchase low price as it is.

In any case, this is what worked for me.

I came to the conclusion that I wasn't going to lose more than £100 and so I have to use a laptop hard drive in order to make the suggested drive of USB and copy the disc on the laptop hard drive.

I went into 'my computer', inserted the disc and he started his stupid clicking on and was not recognized, but in the list readers on the left side, I dragged all drive "E" (which is my DVD player and where the disc of Windows 7 was) on the USB hard drive.  This does not seem to have an effect, so I click with the right button on the E drive and press "copy" and "Paste" on the USB hard drive.  Now, I'm not sure if there is just a delay between the first process or if it was this process that has worked (as a result, please try both), but suddenly it seemed to 'wake up' the disc and it was recognized instantly and "run setup.exe" appeared in a pop-up and I could finally install Windows 7!  (Please Note - Although the disc began to copy it to the USB, I could have cancelled at any time so didn't need actually portable hard drive for this process - it just seems to 'wake up' when I tried to copy it somewhere else).

I really hope it works for all those stuck with this problem and would like to hear if it has.

Another point to note is that during installation, the computer will restart several times, and each time restarted mine, it got stuck on the screen black 'boot from CD' (due to the computer not recognize drive).  It was, fortunately, easy to solved for me to eject the disc and then close it again (leaving the disc, of course).  The rest of the installation was fine.

Please, please post on here if the works above for one of you who have problems.  I sincerely hope that it is.

Tags: Windows

Similar Questions

  • Windows 7, freshly installed, can not load the drivers, no usb, no cd player, no internet

    Hey guys,.

    I just installed Windows 7 64 bit on Windows 7 - laptop OS, but did not not any possibility of installing drivers. USB 2.0 does not respond, ethernet cable - no drivers. How can I possibly have to load drivers for the laptop computer?

    I'll try to find a solution, but nothing, only the similar problem was to change in the BIOS USB 3.0 2.0, but I have no idea how do in Insydeh20 bios.

    Hello

    If I understand you correctly, you have installed Windows 7 on your computer, but can not load the drivers that you don't have drivers CD. In addition to this, you can not connect to the internet through an Ethernet cable. In this scenario, we can only do two things to solve the problem.

    1. try to contact your computer manufacturer and ask the driver CD after mentioning your model number. You can also visit one of the shop of the manufacturer of your computer and ask the drivers CD and see if they can help.

    2. you can download the .exe file from the site of the constructor on any of the advertising of work computer and then install it on your computer using CD/DVD/USB.

    Hope I could answer your query. Feel free to post on the forum, if you have concerns more associated with Windows. We will be happy to help you.

    Kind regards

  • have windows 7 x 64 and hp deskjet 656c can not load the driver he keeps giving me error code 0 x 00000057 down

    have windows 7 x 64 and hp deskjet 656c can not load the driver he keeps giving me error code 0 x 00000057 down

    Hello

    Please contact the Microsoft community. We will be happy to help you with your concern.

    According to the description, you can not install hp deskjet 656c driver you get error code 0x00000057c.

    How do you try to install the driver? Is it through the disc or via the site?

    Method 1: Use a troubleshooting tool to solve the problem:

    Open the hardware and devices Troubleshooter

    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    Method 2: temporarily Disable the Antivirus and firewall and try to install

    Enable or disable Windows Firewall

    http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

    Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 3: Try to install in the clean boot

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After installing windows update, follow step 3 in the link provided to return the computer to a Normal startupmode.

    Please follow these recommended steps, review the additional information provided and post back if you still have the problem. I will be happy to provide you with additional options.

  • Startup error: DLL Load error can not load the resource dll: REPLRES. RLL the specified module could not be found

    Original title:

    ReplSync.dll - error loading DLL cannot load resource dll: REPLRES. RLL the specified module could not be found

    I get this error message whenever I start my computer: replsync.dll - DLL Load error can not load the resource dll: REPLRES. RLL specified module is not found Help please?  Thank you!

    Hello
    You did changes to the computer before the show?
    Method 1:
    Step 1:

    You can try to start in safe mode and check if the problem persists.

    The Advanced Boot Options screen lets you start Windows in advanced troubleshooting mode. You can access the menu by turning on your computer and pressing the F8 key before Windows starts.

    Some options, including the mode safe mode, start Windows in a limited State, where only the essential is started. If a problem doesn't reappear when you start in safe mode, you can eliminate the default settings and basic device drivers and services as a possible cause.

    Advanced startup options
    http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

    Step 2:

    If the problem does not occur in safe mode, and then try to perform the clean boot and see if the problem still occurs. Clean boot helps eliminate software conflicts. For more information, see the following link:

    http://support.Microsoft.com/kb/929135

    NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the article mentioned above.

    Method 2:

    You can run Windows Defender Offline tool.

    See the following link for more information about the same:

    What is Windows Defender in offline mode?

    http://Windows.Microsoft.com/en-us/Windows/what-is-Windows-Defender-offline

    Windows Defender Offline: Frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows/Windows-Defender-offline-FAQ

    Note:
    data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

    Method 3:

    Try the SFC (System File Checker) scan on the computer.

    SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.

    Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC/scannow is completely automatic and very easy to use, the tool should be usually one of your top not troubleshooting.

    Reference:

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    Let us know if it helps!

  • Just rec had delivered Lightroom 5 w / new camera.   Could not load the disc to my OS10.9 [said coverage requirements = 10.7 and 10.8] advice?

    Just rec had delivered Lightroom 5 w / new camera.   Could not load the disc to my OS10.9 [said coverage requirements = 10.7 and 10.8] advice?

    Hello

    You can simply download the latest version version here and install.

  • I can't connect to creative cloud, and so I can not install the Photoshop account I paid for.  I changed my ID adobe several times, but I can't connect to creative cloud, he always says I have the wrong password.  Help, please. Thank U

    I can't connect to creative cloud, and so I can not install the Photoshop account I paid for.  I changed my ID adobe several times, but I can't connect to creative cloud, he always says I have the wrong password.  Help, please. Thank U

    Hello

    Please contact the support.

    Contact the customer service

    Concerning

  • Hi, I can not paste the copied text of pages for Adobe applications, why is this? I have can´t even paste text in InDesign...

    Hi, I can not paste the copied text of pages for Adobe applications, why is this? I have can´t even paste text in InDesign...

    Duplicate thread: I can´t paste the copied text in any application adobe... InDesign, Photoshop, Prime Minister...

  • After copying a machine a host for another vspehere vsphere virtual machine I can not load the VM machine upwards. Can't open the Flash "hard" or one of the disks disk that this depends on

    Here is the error msg I get from vsphere client.

    Cannot open the Flash '/vmfs/volumes/52120f68-3f09e8f0-affd-f01fafcf18af/w2k3SE-base-20101005/Windows w2k3.vmdk' or one of the disks disk that it depends on.

    The system cannot find the specified file

    VMware ESX can not find the virtual disk '/vmfs/volumes/52120f68-3f09e8f0-affd-f01fafcf18af/w2k3SE-base-20101005/Windows w2k3.vmdk '. Check that the path is valid and try again.

    I have ssh client due to vmware ESX.

    ls # vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple

    564d73b4-7443-6b7f-9a70-cd355ad76d3b.vmem Windows XP Professional.vmx.0 Windows w2k3 - s004.vmdk Windows w2k3 - vmware - 16.log s009.vmdk

    Windows XP Professional - 24367b9b.hlog Windows XP Professional.vmxf Windows w2k3 - s005.vmdk Windows w2k3.vmdk vmware - 17.log

    Windows XP Professional.nvram Windows w2k3 - s001.vmdk Windows w2k3 - s006.vmdk hiding vmware - 18.log

    Windows XP Professional.vmsd Windows w2k3 - s002.vmdk Windows w2k3 - 14.log - vmware vmware - 19.log s007.vmdk

    Windows XP Professional.vmx Windows w2k3 - s003.vmdk Windows w2k3 - vmware - 15.log vmware.log s008.vmdk

    It seems that all the files are there. Except that there are some spaces.

    / vmfs/volumes/52120f68-3f09e8f0-AFFD-f01fafcf18af/Apple # cat "Windows w2k3.vmdk".

    # Disk DescriptorFile

    version = 1

    Encoding = "windows-1252".

    CID = 97c834c1

    parentCID = ffffffff

    isNativeSnapshot = 'no '.

    createType = "twoGbMaxExtentSparse.

    # Description of the measure

    RW 4192256 CLAIRSEMES "Windows w2k3 - s001.vmdk.

    RW 4192256 CLAIRSEMES "Windows w2k3 - s002.vmdk.

    RW 4192256 CLAIRSEMES "Windows w2k3 - s003.vmdk.

    RW 4192256 CLAIRSEMES "Windows w2k3 - s004.vmdk.

    RW 4192256 CLAIRSEMES "Windows w2k3 - s005.vmdk.

    RW 4192256 CLAIRSEMES "Windows w2k3 - s006.vmdk.

    RW 4192256 CLAIRSEMES "Windows w2k3 - s007.vmdk.

    RW 4192256 CLAIRSEMES "Windows w2k3 - s008.vmdk.

    RW 16384 SPARSE "Windows w2k3 - s009.vmdk.

    # The database disk

    #DDB

    ddb.virtualHWVersion = "7".

    DDB. UUID = "60 00 C2 91 86 bb a5 - 5 c bc 28 89 75 01 c9 b0 e1"

    DDB. Geometry.Cylinders = "16383.

    DDB. Geometry.Heads = "16".

    DDB. Geometry.sectors = "63".

    ddb.adapterType = 'ide '.

    ddb.toolsVersion = "8228.

    ddb.longContentID = "9d219dcc524591ac1095297d97c834c1".

    and here's a copy of the vmware.log file

    2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-STRING: "/ vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3.vmdk ': cannot open (the system cannot find the specified file).

    2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s001.vmdk ": closed.

    2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s002.vmdk ": closed.

    2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s003.vmdk ": closed.

    2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s004.vmdk ": closed.

    2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s005.vmdk ": closed.

    2014-08-14 T 19: 01:56.926Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s006.vmdk ": closed.

    2014-08-14 T 19: 01:56.926Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s007.vmdk ": closed.

    2014-08-14 T 19: 01:56.926Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s008.vmdk ": closed.

    2014-08-14 T 19: 01:56.926Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s009.vmdk ": closed.

    2014-08-14 T 19: 01:56.926Z | VMX | I120: DISKLIB-LIB: can't open ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3.vmdk' with flags 0xa, the system cannot find the specified file (25).

    2014-08-14 T 19: 01:56.926Z | VMX | I120: Msg_Post: error

    2014-08-14 T 19: 01:56.926Z | VMX | I120: [msg.disk.fileNotFound] VMware ESX can not find the virtual disk "/ vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3.vmdk» Check that the path is valid and try again.

    2014-08-14 T 19: 01:56.926Z | VMX | I120: [msg.disklib.FILENOTFOUND] the system cannot find the specified file

    2014-08-14 T 19: 01:56.926Z | VMX | I120: [msg.disk.noBackEnd] cannot open disk ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3.vmdk' or one of the snapshot disks it depends on.

    2014-08-14 T 19: 01:56.926Z | VMX | I120: ----------------------------------------

    2014-08-14 T 19: 01:56.939Z | VMX | I120: DISC: discs of opening had 24 ms.

    2014-08-14 T 19: 01:56.939Z | VMX | I120: Module DiskEarly market failed.

    2014-08-14 T 19: 01:56.939Z | VMX | I120: VMX_PowerOn: ModuleTable_PowerOn = 0

    2014-08-14 T 19: 01:56.942Z | VMX | I120: WORKER: asyncOps = 1 maxActiveOps = 1 maxPending = 0 maxCompleted = 0

    2014-08-14 T 19: 01:56.950Z | VMX | I120: Vix: [12787513 mainDispatch.c:3870]: VMAutomation_ReportPowerOpFinished: VarEtat = 1, newAppState = 1873, success = 1 additionalError = 0

    2014-08-14 T 19: 01:56.951Z | VMX | I120: Vix: [12787513 mainDispatch.c:3870]: VMAutomation_ReportPowerOpFinished: VarEtat = 0, newAppState = 1870, success = 1 additionalError = 0

    2014-08-14 T 19: 01:56.951Z | VMX | I120: Past vmx/execState/val of poweredOff

    2014-08-14 T 19: 01:56.951Z | VMX | I120: Vix: [12787513 mainDispatch.c:3870]: VMAutomation_ReportPowerOpFinished: VarEtat = 0, newAppState = 1870, success = 0 additionalError = 0

    2014-08-14 T 19: 01:56.951Z | VMX | I120: Vix: [12787513 mainDispatch.c:3909]: error VIX_E_FAIL in VMAutomation_ReportPowerOpFinished(): unknown error

    2014-08-14 T 19: 01:56.951Z | VMX | I120: Vix: [12787513 mainDispatch.c:3870]: VMAutomation_ReportPowerOpFinished: VarEtat = 0, newAppState = 1870, success = 1 additionalError = 0

    2014-08-14 T 19: 01:56.951Z | VMX | I120: Past vmx/execState/val of poweredOff

    2014-08-14 T 19: 01:56.952Z | VMX | I120: VMIOP: output

    2014-08-14 T 19: 01:56.956Z | VMX | I120: Vix: [12787513 mainDispatch.c:861]: VMAutomation_LateShutdown()

    2014-08-14 T 19: 01:56.956Z | VMX | I120: Vix: [12787513 mainDispatch.c:811]: VMAutomationCloseListenerSocket. Close the socket of the receiver.

    2014-08-14 T 19: 01:56.957Z | VMX | I120: VMX VMDB Flushing connections

    2014-08-14 T 19: 01:56.957Z | VMX | "I120: VmdbDbRemoveCnx: remove Cnx Db for ' / db/connection / #1 /"

    2014-08-14 T 19: 01:56.957Z | VMX | I120: VmdbCnxDisconnect: Disconnect: pipe closed for pub cnx ' / db/connection / #1 /' (0)

    2014-08-14 T 19: 01:56.961Z | VMX | I120: Exit VMX (0).

    2014-08-14 T 19: 01:56.961Z | VMX | I120: AIOMGR-S: o stat = 1 r = 3 w = 0 I = 0 br = 49152 bw = 0

    2014-08-14 T 19: 01:56.961Z | VMX | I120: OBJLIB-LIB: ObjLib cleaning done.

    2014-08-14 T 19: 01:56.961Z | VMX | W110: VMX has left the building: 0.

    Assuming that you have enough free disk space on the host ESXI 5.1 data store, I suggest you that you load the multiextent module as shown in the link, I posted and then clone the virtual disk using the vmkfstools command line utility.

    vmkfstools 'Windows w2k3.vmdk'-i 'clone.vmdk' slim-d - an ide

    vmkfstools EI 'Windows w2k3.vmdk' 'old.vmdk '.

    vmkfstools EI "clone.vmdk" "Windows w2k3.vmdk".

    The first line of the clones of the virtual disk in a virtual drive put in service end format, and the following two lines renaming virtual disks, so that you can delete the "old*.vmdk" files once the VM works as expected.

    Alternatively, you can also run the commands on the host ESXi 4.1 and then copy the new files hard again to avoid loading the multiextent module in the new host.

    André

  • I can not load the Home Page of Oracle E-Business Suite Applications

    I have installation ebs 12.1.1 on windows server 2003 and I can't load the Home Page of the Oracle Applications (http://ebsoracle.workshop.cl:8000)

    What could be the cause?

    Is there a log of information on this failure?

    I check the host file and that's okay

    Help me please.

    Thank you.

    I have installation ebs 12.1.1 on windows server 2003 and I can't load the Home Page of the Oracle Applications (http://ebsoracle.workshop.cl:8000)

    What could be the cause?

    What is the error?

    Is there a log of information on this failure?

    I check the host file and that's okay

    Make sure that apache log files (error_log * and access_log * under the $LOG_HOME/ora/10.1.3/Apache Directory).

    In addition, run AutoConfig and make sure that it ends successfully.

    Thank you
    Hussein

  • Looking for new information in the discussion "can not load the video file.

    I repeatedly get him "cannot complete request because Photoshop can not download the file" error message.  I have read the information about Quicktime, which dates back to April.  However, I get this while trying to open the video files .mpeg-2, .mxf and .mp4 (Photoshop CC).  All these depend on Quicktime?  Is there another reason for getting this error?  At least the first two of these formats are listed in the manual as being recognized and appropriate for Photoshop CC.

    Hi seiurus,.

    Please check that your using the latest version of Photoshop 2015.5.0.

    Also, please reset the default preferences and check if that helps.

    Reference: Preferences in Photoshop

    Kind regards

    Mohit

  • The blur tool.  I can not get the blur tool to work for me.

    The blur tool.  I used Photoshop for photo editing until 2 years ago.  I just started to use Photoshop again, and I can't get the blur tool to work for me.  I just does not affect the pixels at all.  I think I'm following the correct process for click on the blur tool and then configure the brush to do my procedure of blur.  Help, please.

    Hi Robert,.

    Please do not forget that you work directly on the layer on which is the image you want to blur. Where you work on an empty layer, make sure that your auto to check the ' sample all layers ' (mine is unchecked) property in the top bar. Also, as has been suggested previously, check if the blending mode is set to normal.

    If the problem persists, please let us know,

    Kind regards
    Martin Benes

  • WINDOWS can NOT LOAD the DRIVER of MOUSE 39 error in Vista

    error 39. window pops up saying "windows cannot load the device driver. The driver may be corrupted or missing.

    Go to the web site of the manufacturer of the mouse and locate the software, firmware or driver for your specific mouse and your Vista version and download everything on your system.  Isensure that you have the correct downloads.  If they have installation instructions available, download them too.

    Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers (and you should do the mouse at least and all you have time to do - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.  Make sure that the mouse is attached when you do this so that it can be recognized.

    If the stilll driver does not install (and you don't know it is compatible with Vista -http://www.microsoft.com/windows/compatibility/windows-vista/default.aspx), then delete all the system mouse drivers, connect the mouse, go to start / Control Panel / Add Hardware and select the option to search for new hardware devices and then to follow the guests and instructions.  If it doesn't detect any new hardware, select the option to choose your material, find the closest match and install it manually as shown.  This will include installing the driver which will hopefully work in this way.

    If it still does not work, see the following articles on 39 error that can be useful:

    http://forums.techarena.in/Vista-hardware-devices/686991.htm

    http://www.windowvistarepair.com/VistaBlog/known-Vista-issues/dreaded-Vista-error-code-39-code-31-code-32-and-code-19-60/ (NOTE: do NOT download the software recommended on the site - it can cause damage to your system).

    http://en.kioskea.net/faq/1215-driver-damaged-or-missing-code-39.

    I hope this helps.  If this isn't the case, after return and we will try other options (don't forget to answer my questions and update me on what happened when you tried the various recommendations listed above, then we will be better able to focus on the problem.)

    Thanks and good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • How can I use my hp with windows rt printers. I can not load the printer drivers

    How can I use the usb port to connect printers?

    Connect the printer to the usb port, the victory should automatically detect and begin the installation

    http://Windows.Microsoft.com/en-us/Windows/install-printer#install-printer=Windows-8

  • I can not load the KB2584146 update

    My computer is windows XP service pack 3.  I have automatic updates on and normally there is no problem, but I noticed that on the last update KB2584146 failed to load.   I tried MrFixit but this has not cured the problem.  Can you help me?

    Clive Wetherley-Moody

    My computer is windows XP service pack 3.  I have automatic updates on and normally there is no problem, but I noticed that on the last update KB2584146 failed to load.   I tried MrFixit but this has not cured the problem.  Can you help me?

    Clive Wetherley-Moody

    I had the same problem. The fix was simple for me - thank God. I just disabled all programs antivirus (NOD32 and Threatfire) and put my firewall (PCTools Firewall) to "Enable all" - essentially disable it too. Who did. The update KB2584146 installed fine after that. I hope this helps.

  • "The site has encountered a problem and can not open the page"

    I want to download and install Service Pack 3, but I can't access the website...

    You must be at Service Pack 3 level before you can use Windows updates.

    Steps to take before you install Windows XP Service Pack 3
    http://support.Microsoft.com/kb/950717

    It is stated in "How to obtain the latest service pack XP" is.

    If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

    Download the Windows XP Service Pack 3 package now

Maybe you are looking for