Windows 7 is no longer reads the USB storage devices

Similar Questions

• HP Compaq 8100 Elite: Boot interrupted by the USB storage device

  If I have any sort of plugged when starting USB storage device, I just get a blank screen with a blinking cursor.

  I disabled each device start-up apart from the internal SATA hard drive and it still happens.

  Finally I found a BIOS update.

  On the HP consumer Support Site? NO.

  On an alley, ad - ridden, dirty pilots-for-all site.

  Anyway. It worked

• Windows XP Pro unable to detect the USB mass device

  Original title: USB

  I have a Western Digital ("My Passport Essential" WD3200ME) portable mass memory. My PC is running XP Pro with all the latest news from the security of Ms. In the last year or two, I noticed that it becomes progressively difficult for XP to recognize my USB mass storage device - sometimes, he took a reboot and repeated the reconnection of the device before the device is recognized. MS updates, the more difficult this because to make a connection. When it fails to connect, I get this annoying Hardware Wizard, which constantly to appear, asking Windows to search for the correct driver. I also have an old Pro XP PC I have installed all the updates latest MS, but it has XP SP3 installed. The old PC has no difficulty to recognize and connect to the same USB mass storage device. So I have 2 PC Pro XP: does not work with the latest updates from MS that gives connection problems to my USB mass storage and the other XP Pro base. Even if I bought another USB mass storage, it would probably suffer the same problem. What do you think is the problem?

  One of the best USB debugging of sites I've come across is this:
     <>http://www.Uwe-Sieber.de/usbtrouble_e.html >
  Go about 1/2 to the bottom of the page and look for the section titled: "application for XP drivers.  Most likely, you just need to delete the file "infcache.1" and let it rebuild.

  HTH,
  JW

• E4200 with Win 7 - could not connect to the sharing of files on the USB storage device

  Hi, I tried several disks now, but am mainly interested in getting my Iomega 1 TB drive to work, but none of the 3 I tried to do. None of the USB drives I had when buying this router on the list of "approved" ridiculously short which is of course not noticed when buying the router, but the discs are recognized, I can FTP to one of them (Filezilla), format, create to-DOS, etc. via the web interface... the only thing that does not seem to work is to map the created actions. The error obtained net use is 'System error 1231' giving in 'Map network drive', 'Windows cannot access\\192.168.1.1' with 0x800704cf error code. I get what I pass credentials or not. Please advise, external storage has been the main reason that I bought this router and I need to know if I should return it. Thank you

  I know that sounds totally absurd given that FTP and what - not worked, but I swapped the USB cable I was using between readers and the router, and presto, it worked. I been in this business a lot of time and work with Cisco equipment all the time, so I know how ridiculous, this sounds like a solution, and perhaps in the context of permutation that cable thing happened I can't remember since I was a package 6 deep at the time... but it works now... now, if I can get just the AVI 1080 p files to stream to Xbox 360 without the video do rough I will be gold... but that's another thread. Thank you all.

• Issue using the usb storage device

  Windows 7 does not recognize one of my usb memory sticks. It makes a noise when I plug

  Issue edited by the moderator to add clarity.* *.

  It makes a noise when I plug

  A USB device that makes a noise is defective. You need to replace it.

• remove the usb storage device

  I use the safely remove hardware in the taskbar before you remove a USB flash memory.  When I plug in my pc doesn't recognize not unless I restart the computer, is there a way to bypass restarting my computer to recognize memory flash usb again, Ed

  You are welcome.

  Please click "Propose as answer" on this page so that this thread can be closed.

  K M JAI Support general (INDIA)

• Deletion of data (step by step) USB storage device

  I need to know how correctly, step by step, remove a usb port connected data storage device. I am currently using, Windows visit Home Premium. Thank you...

  By the clock in the bottom right notification area, you will find an icon. Hovering over it said something like 'remove hardware safely '.

  Double click on this button.

  Find the usb storage device in the hardware list.
  Select this device.
  Click on stop / remove safely

  Wait until you receive a notification that can be removed.
  Remove the USB port.
  If so, you can now safely unplug unit from wall outlet as well.

  I hope this helps.

• Driver for usb storage device

  Hi, I have a packard bell No. PEW96 pc and I use a windows 7 Home premium. The problem is that the pc is not a driver for the usb storage device. How I can install it and how I can find it? and the name is? I hope you reply and help me to resolv this.thank you

  Moved from feedback

  Original title: usb storage driver

  Look in their Download Center.

  http://www.PackardBell.co.UK/PB/en/GB/content/download

  Good luck.

• Satellite A200-1NF needs time to read the USB flash drive

  Hello

  I have a Toshiba Satellite A200-1NF, model No.: ETA 6-055021FR works with Windows 7.

  My problem is that my USB is plenty of time to read the USB keys.

  Could you please help me to solve this problem.

  Thank you.

  Sorry, but for me the question is not clear enough... Satellite A200 recognizes the connected USB MemoryStick?
  If he recognizes the USB device connected, then everything seems to be OK.

  By the way: you said that the laptop needs a lot of time reading the USB...
  How long does it take and have you checked if the number is displayed using different USB ports and different flash memory sticks?

  If this is not the case, what to do

• How can I get the USB Audio device in option audio device for Windows XP?

  USB Audio will not appear as an option. However, the Audio USB headset is an option. Help. Thank you

  Hi VincentMr,

  ·         What is the brand and model of the USB audio device?

  You may need to install the device drivers on the device manufacturing site, or else you must have received the CD of the software with the device.

  See the following article for more information on the update of drivers:

   

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  Let us know the results.

• I just looked at problems with importing files from nikon D810 in LR 5.7 it pop a window saying it can't read the files to work on an imac 27 "yosemite on my mac pro running after several times he finally managed to read files and import them into LR

  I just looked at problems with importing files from nikon D810 in LR 5.7 it pop a window saying it can't read the files to work on an imac 27 "yosemite on my mac pro running after several times he finally managed to read files and import them into LR, I never had this problem before there was a sort of update that could from cause?

  What is the destination folder that the date be underneath?  In the top right it says users who suggests, you try to put the photos on top of your username instead of under your username.  Maybe that's the problem.  So change your folder in the drop-down list at the bottom right of what it should be rather than users, and if you're going to show us the destination of your photos at least scroll through the list of folders down right so that we can see which is the white highlight.

  Here is how mine looks like if I want to put my photos imported under my subfolder users - Steve - photos by date:

  

• Using the USB audio device as default instead of analog audio ports

  Audio microphone USB installs and is listed in the devices under sound, video and portable with Dell computer game controller devices running Windows Vista, but the problems the system to use the USB mic as the default.  The sound devices list has also IDT HD audio codecs indicated, and the system will analog as the default input channels for the microphone, with no way to install the USB device.  Is it possible to put the USB audio as default microphone device?

  Hello RSA 456,.

  Many sound problems are caused by hardware that is not configured correctly. We will check your sound card, connect the cables in the correct locations, ensuring that the material has the power and the verification of the volume.
  Please follow the method described below to solve the problems.
  Method 1:

  1. plug your USB microphone.
  2. the LED will light to indicate that it is powered USB.
  3. Windows will automatically detect the USB Audio device and install the universal drivers.
  4. to set up your microphone as default device USB Open Control Panel.
  5. Select display as a classic view of your control panel, then select Select Sound.
  6. click on the recording tab. Here your USB Microphone will be listed.
  7. click on the USB microphone. If there is no checkmark beside the USB Microphone, click on set as default.
  8. the default device is used in most programs such as tape recorder simple registration.

  Method 2:
  Please click the link below to check how to check if the hardware works just fine.
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows?T1=tab02

  Kind regards
  Sooraj.S

• When a pop-up message indicates that a storage device has just been attached and I don't put a USB storage device into the computer at all, what that means?

  From time to time, (isn't that every now and then, not every day or every week) a message appears on the computer screen to notify that "a storage device has been attached... and something or other on a port '-as it would if a new hardware device had just been installed or removed... only, I have not attached at a storage device.

  In fact, apart from the scanner, printer and keyboard connected, which are already inserted until the computer is turned on, no USB storage device or any other thing seized or inserted into the computer when this message is displayed on the lower right screen where the icons on the desktop are,

  Why would this happen unless I had personally inserted/joint a USB stick storage device myself in my computer?

  I'm afraid that maybe someone to access details and store information from a remote location via a storage device? Is this possible?

  And if it's an error of some sort, how to fix this problem?

  Please notify. Thank you.

  This probably means you have a bad USB connection somewhere.  I got this a lot when I used markets good USB hubs.  It also happened a lot on a couple of the USB plugs on my old laptop 4 year, where I had plugged in and out things in them so that the connectors are not as strong as they were when new.  My main office more connected devices above that outputs 4 USB, that I had on the back, so I finally bought a card extension to add 4 more exits USB.  If this is your case, perhaps you could do the same.  Expansion cards are not very expensive, usually in the range of $ 15 to $ 25, and they are fairly simple to install.

  I hope this helps.  Good luck.

• My floppy drive is not reading the disks. Device Manager does not detect any problems, I uninstalled and reinstalled the drivers. What should I do now?

  My floppy drive is not reading the disks. Device Manager does not detect any problems, I uninstalled and reinstalled the drivers.
  Convenience store said to click on properties Insert the diskette and
  Double click on open, but when I do that it stop computer
  and opens the recovery and ask for a correct diskette,

  Hello Tallm,

  Thank you for your message.  Did you get your floppy drivers of your installation diskettes?  If so, go to the website of the manufacturer of your computer and download/install the latest drivers.  Please let us know if this or help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Impossible to disconnect itself from USB storage devices

  Original title: USB storage devices

  Once more I couldn't properly disconnect a USB storage device because Windows tells me that a program is still using the device. There is no reason for any program to access it then why on earth isn't Windows the task/program name so that I can address the issue instead of having to restart my computer? Of the many irritants "characteristic" of Windows, it is one of the most galling.

  Hello

  ·        What is present in the USB key?

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  I suggest you follow the steps mentioned in the article below and check if the problem is resolved.

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  If there is nothing important in the USB device, I suggest you to format the device and see if the problem still occurs.

  Note: If there is no important data in the USB then, back up data, and then format the USB.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.