Windows 7 it's without a permit after changing the hard disk (disk image)

Similar Questions

• Windows 7 says this isn't authentic after changing the HARD drive and can not activate

  After a Windows Update I received a notice that my version of windows was not authentic, which is false because I had windows on my laptop because I got it 4 years ago. Recently, I had to have the changed HARD drive as it corrupts. Installed new HARD drive and partition it a space in which the old files to hard drives. Seemed to turn very well when HARD drives were exchanged and windows installed on the new drive until windows update. My Microsoft certificate key is passed out to illegible but I don't have the product key for the OEM version. Any help would be great, thanks.

  If Windows was preinstalled on your computer, you can enable using the code from the sticker on the computer.  If you can not read the sticker more, you will need to contact the computer company he built.

  If you purchased Windows from the store, you can enable using the code of the case/box/CD.  If you can't read it, you must contact the retailer who sells to you.

• 0xC8000247 error, cannot install Windows Update after change of hard disk.

  Error code original title: 0xC8000247

  I just replaced the hard drive in two laptops.  Set to launch on the third.  After replacing the hard drive by using EZ gig cloning software iv install the new drive hitachi that I tried to run windows update and received this error message.

  Hello

  Method 1:

  I suggest you to perform a System File Checker scan.

  Click on the link mentioned below for more information about the System File Checker analysis

  http://support.Microsoft.com/kb/929833

  Note: you may be prompted to insert the Windows Vista installation DVD, if all files are proven to be absent or corrupt.

  Try to install the update once the scan is complete.

  Method 2:

  I also suggest you to follow the steps mentioned in the link and check.

  Follow the steps listed in the article mentioned and check.

  Important:

  How to back up and restore the registry in Windows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  If the steps do not contribute not to proceed to method 3:

  Method 3:

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  http://support.Microsoft.com/kb/2255099

  Note: After the upgrade on site, your personal data and installed programs will not be deleted, but you may need to run Windows Update to install all the updates that are available for your system to update these files system to the current version.

  If your installation DVD disc is prior to Sp1, and you have the SP1 is installed on your computer, you will need to uninstall SP1 to finish the upgrade on the spot and then reinstall the necessary windows updates. This applies if you have SP2 also.

  Try to install the updates once the installation is complete.

  Hope this helps and keep us posted.

• Activate Windows 7 using the same product key after changing the hard drive.

  Original title: activate windows 7.

  Before that I put a new hard drive, should I the new product key or the same product key?

  Did you follow this advice?

  If it requires no Activation phone after replacing the hard drive, do not follow request to Auto, but brace yourself for a real person explain as to what has been done for purposes of re-setup

  "How to activate Windows 7 by phone '

  http://www.SevenForums.com/tutorials/18715-activate-Windows-7-phone.html

• HP pavilion dv6-7029wm recovery kit lose after changing the hard drive

  Hello

  Recently, I changed the hard drive after the old one crashed, so I need the recovery kit, but the site it says shipps only in canada or the United States

  as I left the States, how can I get them?

  where can I download the recovery image and burn it to a DVD?

  Hello

  Another option that you might consider is to create your own Windows 7 installation disc.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC - just download the Disk Image correct ( this must be the same version that originally came with your laptop - it is listed as Windows 7 Home Premium 64 - bit ) from the link below and use an app like ImgBurn ( Note: you can deselect additional software during installation of ImgBurn offerings) to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  The source of the Windows Image is Digital River.

  Windows 7 Home Premium 64 bit SP1.

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  You may need, additional drivers and software are here.

  Kind regards

  DP - K

• Satellite Pro L500-1W4 - cannot install Win 7 Pro after changing the HARD drive

  Hi all

  I need assistance with Windows.

  I have a Toshiba Satellite Pro with Windows 7 preinstalled pro and the recovery DVD to downgrade to Windows XP Pro.
  I had to change the hard drive, so I try to reinstall Windows 7 from the recovery CD, but it does not work. He said that it is not possible to install this on this machine.

  So I tried with Windows XP CD recovery and no problem
  I'd rather have windows Windows 7 but I do not know how to retrieve
  Last information, the Windows XP CD recovery came with the laptop that Windows 7 was made by the store who sold me the computer.

  Thank you for your help
  Julie

  As far as I know there is not a kind of limitation and if there is no problem with the original recovery for Win7 disc, you should be able to install it on any HARD disk that you use with your machine.
  I upgraded HDD to the SSD on my installation of picture machine and the restore worked without any problems.

  To be honest, it is not easy to say what the problem is here, but the Win7 installation disc is somehow suspect for me. I don't know what model of laptop you have exactly, but somehow, I feel you didn t get original drive Win7. Best evidence is the Windows XP Home edition recovery disk. The prinziple with Win7 is the same and it should works.

  When you use this disk you should have the menu as shown on http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm

  This document explains how this works with the original installation disc of recovery.

• Airport utility in windows 10 detect but wireless internet does not detect the hard disk, how to do?

  Airport utility in windows 10 does not detect the hard disk, how to?, the Office detect wireless internet no hard drive.

  What hard drive? It of a time capsule, or is it a drive connected to an airport extreme?

  What model number is the most convenient airport?

  Any plugged into USB drive must be formatted FAT32 (no other type of FAT as exFAT) or HFS +, IE standard Apple format.

  In addition, not all drives are recognized.

  The internal drive of the TC must be recognized, but there could be problems as well according to the age.

• Problems with folder permissions after replacing the hard drive

  Hello

  Recently, I replaced the hard drive on my mac.  Already before the replacement, I got the files that I had locked.  Now I'm unable to open the file.  I get the error "the folder 'nom_de_dossier' can not be opened because you don't have permission to see its content".  I looked at the permissions for the folder and everything he says is fetch.  I ran a command in the Terminal and for one of the records in question, that's what I see-

  drwxr-x - 13 501 501 442 5 July 2013 MG

  Any help would be greatly appreciated!

  Running OS X El Capitan

  10.11.4 version

  Try this first:

  Start the mac all holding the SHIFT key, it is slow, connection, and then select Restart from the Apple menu.

  When this does not help:

  Reset password utility in the recovery Partition:

  1. Restart your computer from the recovery partition.
  2. Open disk utility and run a repair permissions on your boot volume (in ElCapitan click the first aid tab). Once this completed, close disk utility. We do this for good measure.
  3. Open a Terminal from the Utilities menu. Type in resetpassword and select your user (NOT administrator system/root) account in the menu drop-down.
  4. Click on the Reset button at the bottom of the window ACL section and Reset the folder permissions.
  5. Exit the utility password and return to the main recovery menu.
  6. On your keyboard, press ⌘ + Q and restart your computer. It is very important that you don't hold down the power button to exit the recovery session, or the ACL Reset to occur.

• Windows cannot repair this computer automatically (Vista) after changing the motherboard

  After the power outage, my computer crashed (Compaq machine pre-installed).  I bought the new mother/CPU/memory card and keep all the rest (HD, DVD, etc.).  When I boot using the old hard drive, I get "Windows cannot repair this computer automatically.

  Any ideas as to what I should do?  I intend to retrieve the HD upgrade to Windows 8.

  Thank you

  After the power outage, my computer crashed (Compaq machine pre-installed).  I bought the new mother/CPU/memory card and keep all the rest (HD, DVD, etc.).  When I boot using the old hard drive, I get "Windows cannot repair this computer automatically.

  Any ideas as to what I should do?  I intend to retrieve the HD upgrade to Windows 8.

  Thank you

  Clarification:
  Windows Vista is preinstalled on this system?
   
  If I read (and cited only) correctly - Yes, which is not going to work.  The license for Windows Vista was related to the Compaq system motherboard.  If you had that repaired under warranty, HP? Compaq could have helped you.  As you have created a new machine (motherboard especially) now, you will need to purchase a new license for Windows Vista or any other operating system of your choice.
   
  You could, I suppose, buy the OEM of Windows 8 version.  You will have the same problem later (OEM licenses is related to the first motherboard it is installed and activated with.)

• Update Windows Vista error code A 8024, 000 after replacing the HARD drive

  Hello

  I had to replace the failed hard drive on my laptop (I replaced it with the same brand and size).

  After that I used the recovery CD, Windows Update gives me error code A 8024, 000.

  I tried the solution provided in this thread, but did not work for me:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/Windows-Update-error-code-8024a000/562845f3-78d5-42A0-bed5-e3fd39f01df7?page=1&TM=1337378075490

  I also tried to load the Microsoft Fixit utility, which has not installed, I tried to update the installer but it gave me an error as well. Also the installation of SP2 crashed with an error (8000ffff if I remember correctly)

  Any help is appreciated.

  Thank you.

  Eugen

  Hello

  1. which utility Microsoft Fixit did you tried to load?
  2. what happened when you tried to load the Microsoft Fixit utility?
  3. what was the error message when you try to update the installer?
  
   
  Method 1: Try running the fix - it of the article mentioned below, if you not him have not yet tried.
  The problem with Microsoft Windows Update is not working:
  http://support.Microsoft.com/mats/windows_update/
  Method 2: run SFC scan. Analysis (sfc) System File Checker will Windows replace corrupted or missing system files on your computer.

  Scan sfc enforcement procedure:
  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  b. click on continue or provide administrator credentials if prompted.
  c. in the type in the following command prompt window and press ENTER:

  sfc/scannow
  Refer to this article for more information:
  http://support.Microsoft.com/kb/929833
   
  Method 3:
  
  0x80000FFFF error code when you download updates on a computer running Windows Vista by using Windows Update or Microsoft Update:
  http://support.Microsoft.com/kb/946414
  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://support.Microsoft.com/kb/322756/
  Download Windows Vista Service pack from here:
  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791
  Reference:
  The problems with the installation of the updates:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• Cannot install a version upgrade of Windows Vista after changing the hard drive.

  Original title: my computer gives me a warning... saying backup.

  My hard drive is bad.  I can feel it.

  Keep the system lock up and rebooting message says cable and BAD status.

  I took the hard drive... put in a new one... and now it says I can't install vista.

  I have the version upgrade.

  I put XP on this drive and upgrade again.  Y at - it something I can do.

  I want to just reinstall windows vista on a new drive.  How can I accomplish this.

  The bad hard drive still works and is accessible it is not stable and keeps locking up.

  The full version of XP that I have is out of licenses.  Help Help

  Hi Rob,

  You must install first Windows XP and upgrade to Windows Vista.

  If you have a genuine copy of Windows XP, after you install Windows XP you can contact support for Microsoft's Activation to activate the copy of Windows XP.

  For more information, you can consult the following articles:

  Upgrade Windows XP to Windows Vista

  How to activate Windows XP

• Not authentic Windows after changing the hard drive

  Hi, I got a genuine version of windows 7 on my PC, but the hard drive was too small. I bought a new hard drive and copied the entire former disk including the operating system on it and only use the new disk. I have now a message saying that my copy of windows is not genuine and I need to buy a new copy. Is it possible to validate my copy without having to buy windows again? I bought the PC with windows pre-installed, this isn't a product key. If I reinstall my old drive do I find the key there and type it on the new drive? is this so where is it located? My operating system is Windows 7 Professional.

  Thank you

  Barry.

  Original title: validation of Windows 7

  Windows 7 came preinstalled on the old drive? If that were the case, use the product key on the COA sticker to reactivate Windows 7 the new disk:

  Click Start, right click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click on the link 'change product key '.

  Enter the product key located on the COA sticker attached to the bottom of your laptop or in the battery compartment. Click next to activate via the Internet.

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  ??

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• C55 - A satellite - keep Windows after changing the HARD drive?

  Hello

  I want to buy Toshiba Satellite C55 - A, which is pre-installed Windows 8.1 and the recovery on the HARD drive Partition.
  I also want to buy 256 GB SSD and put it in Toshiba (and use the external as hard drive from Toshiba HARD drive).

  Can I install Windows 8.1 that I bought (preinstalled) on the SSD?
  If so, how?

  Of course, you can swap the HARD drive with an SSD.
  The key is the recovery media (USB key or drive).
  You must create a recovery disk to replace the HARD drive.

  Laptop Toshiba computers are preinstalled with software called Toshiba Recovery Media creator.
  This allows you to create a recovery media that you can use to reinstall the system on the new SSD installed!

• Windows Vista says it's not authentic after replacing the hard drive in my computer. What should I do next?

  d-My-Computer-worked-on-Last-month-because-the-Hard-Drive-Went-out-they-installed-Home-Premium. Now they-say-it-no valid. What-do-I-do?

  original title: I-need-to-know-what-to-do-about-this-premium-windows-they-say-it's-not-valid.

  Check here

  http://support.Microsoft.com/kb/950929

  to get the appropriate telephone number to validate and activate your installation. The voice of support will guide you through the process.

  Tom Ferguson

• Cannot retrieve Equium L40-10 after changing the HARD drive

  Equium L40 - 10U Windows Vista 32 bit.

  I had a problem with the HDD (120 GB MK1237GSX) & I replaced it with MK2576GSX - 250 GB)

  I have a the original Toshiba product recovery disk, but I can not reinstall the s/w.

  Windows will load initially and then diskpart seems to be installed OK.

  The installation hangs at Image X for Windows
  I get error 23 c:\programfiles\adobe\reader 8 - data read failed.
  Image X could not apply to Vista F:\05468XSP.swm Index 2 to C:\.

  In addition, the administrator screen shows:
  Failed to initialize the Raid class.
  ANY RIAD continually normally

  I'd appreciate any help with this problem.

  Thank you

  Jim

  Do you use the disc of recovery for the first time?