Windows 7 keeps changing home network to the public network, without pompting, in this case I can't access the internet, even though my router still receives the internet signal.

Similar Questions

• Why Outlook in Windows 7 keep ask my network password every time I open the program and repeatedly asking the password. I can receive and send mail without problems

  Why Outlook in Windows 7 keep ask my network password every time I open the program and repeatedly asking the password. I can receive and send mail without problems

  See this for help...

  http://support.Microsoft.com/default.aspx/KB/290684 MS - MVP Windows Desktop Experience, "when everything has failed, read the operating instructions.

• Cannot complete the home network implementation to include this computer as it can not be seen on the network.

  Original title: How can I remove a unidentified firewall running also apparently in Windows Firewall?

  Under Windows XP with the Windows Firewall and any other firewall unidentified. Cannot complete the home network implementation to include this computer as it can not be seen on the network. Able to ping outgoing to other computers in a network, but not able to ping inbound from other machines.

  Hello

  1. what makes you think that there are unidentified, firewalls running on the computer?
  2. what exactly happens when you try the home network configuration? You receive an error message?
  3. what exactly happens when you try to ping any computer on the network? Error message?
  4. what operating system is running on this computer? Also after return from the edition of these operating systems?

  See the following articles that might help you.
  How to troubleshoot a network home in Windows XP
  http://support.Microsoft.com/kb/308007

  5 steps: how to set up your network wireless home
  http://www.Microsoft.com/athome/organization/wirelesssetup.aspx

• I have re installed the operating system on my Dell Studio 15 for Windows Vista 32-bit. But now the network controller is not working and I can't use wireless internet

  I have re installed the operating system on my Dell Studio 15 for Windows Vista 32-bit.  But now the network controller is not working and I can't use wireless internet, but I can plug a cable ethernet in there and get online.  What can I do?

  I have reinstalled the operating system on my Dell Studio 15 for Windows Vista 32-bit.  But now the network controller is not working and I can't use wireless internet, but I can plug a cable ethernet in there and get online.  What can I do?

  Install the appropriate network device drivers and software from the Dell downloads web site for your particular model, or better yet, tag Service...

• I can not connect computer vista laptop to my network home, but I can connect to other networks. Other computers can connect to my home network very well. This can be corrected?

  My laptop runs Vista and I've not had problems connecting to my home network wireless until a week ago or not.  Then, trying to connect, I see other available networks, but not my own.  When I try to connect manually, it says that the network already exists.  Other computers, macbooks, are able to connect to my home network without problem.  I am able to connect to a network on my laptop fine unsecured wireless.

  I could 'solve' the problem or get reconnected with a restoration of the system to an earlier date, but it only lasts a day or two.  I searched for another fix and tried many things, including to reset the router, remove my network, and then reinstall, etc, but can't seem to get this to work as if it were - automatic connection as the first network.

  Any help would be appreciated.  Thank you.

  You have rebooted the router and the pc at the same time?

  You run the IPCONFIG / all from a cmd prompt can and download a preview of the output to a file share services like rapidshare and put a link to it in your next post?

• I placed the Web buttons on a template, but they change position each other on several pages. How is this possible and can I fix? This happens on all versions (desktop, Tablet and phone)

  Hello

  I have placed the buttons of navigation on a master page, but they change position each other on several pages. How is this possible and can I fix?

  This happens on all versions (desktop, Tablet and phone)

  (I have created the buttons with elements of the Muse, grouped them individually and link them)

  Now, I'm redoing the buttons because the client wanted smaller and the problem went away on its own.

• Can I access my Internet at home using remote desktop?

  I want to download a file on my home computer and transfer it to my place, because I'm unable to download the file to my current place of residence.  Using Remote Desktop, can I access my Internet home of that remote computer to download a file on my computer at home?  Or would I have access to my computer at home, but still using the Internet on my remote site?

  You would use the internet connection of your computer at home. There is more information here:

  • http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-another-computer-using-Remote-Desktop-connection
  • http://Windows.Microsoft.com/en-us/Windows-Vista/Remote-Desktop-connection-frequently-asked-questions

  Your computer must be running Vista Business or Ultimate. If this isn't the case, you can try to use Windows Live Mesh WIndows Live Essentials package http://explore.live.com/windows-live-mesh?os=other

• Firefox opens, but this morning, I can't access all the links via Firefox. I can through Explorer. I prefer Firefox. Help!

  Firefox opens, but this morning, I can't access all the links via Firefox. I can through Explorer.

  One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.com/kb/server+not+found
  • https://support.Mozilla.com/kb/firewalls

• I just bought a new air of IPad.  It came with IOS 9.1 and I can't restore it from the cloud until I have upgrade to 9.2.1 How can I do this since I can't access my settings?

  I just bought a new air of IPad.  It came with IOS 9.1 and I can't restore it from the cloud until I have upgrade to 9.2.1 How can I do this since I can't access my settings until the IPad is set up?

  Set up as a new device, the Update 9.2.1 the restore to original settings and then load the backup.

  (139893)

• How can I configure new windows to open my home page, but the new tabs to open the vacuum?

  I have my browser set to restore the previous session, when I open Firefox and new tabs to open the vacuum. With these settings, I used to be able to open new windows and carry the load of my home page, while keeping intact previously mentioned behaviour, but when I open a new window now, I get a blank page.

  Is it possible to restore the previous behavior, or are all the tabs that are now seen as the same now, if they are open within the framework of new or existing windows?

  You must change the string "browser.newtab.url" by clicking twice and then write "subject: empty"... now the newtab will open with a blank page...» To change the home page will appear in a new window, see how to How to set the home page How to set the home page ~ J99
  Solved?

• Firewall Windows settings keep changing ~ I don't change them! HELP Please

  Recently, I noticed that to change my Windows Firewall settings, AND I'm not modify them.

  I set the Windows Firewall as follows:

  1. on the "Général" tab
  I ticked the boxes: 'On' (recommended) and "don't allow exceptions".
  2. in the tab 'Exceptions ':
  NO boxes are checked
  I ticked 'display a notification when Windows Firewall blocks a program '.
  3. on the "Advanced" tab
  ONLY "Connection to the Local network" is checked
  and under the 'Settings' button ICMP NO boxes are checked.

  Periodically, I notice that my "Network Icon" (two screens) is very active when I'm not navigate on the internet or by e-mail.  When I click with the right button on the icon and select "Change Windows Firewall settings", I note that the following changes have been made to my original settings, BUT NOT BY me!

  1. on the "Général" tab
  The box: 'On' (recommended) is checked
  BUT "don't allow exceptions" is now disabled
  2. in the tab 'Exceptions ':
  File sharing and printer is enabled
  AND "Display a notification when Windows Firewall blocks a program" is now disabled
  3. on the "Advanced" tab
  If I click on the box 'Connect to the Local network' that is always checked
  under ICMP, and go to the "Settings" button
  NOW, the first "Allow an incoming echo request" is checked.

  Earlier this week, I hadn't double checked if the parameters have changed and started printing a Word document, I had been editing.  Before the start of my print file, my printer started to print pages and pages of garbled text (just the letters and not readable ~ grabage).  After the cancellation of all the print jobs, I checked the Windows Firewall settings again, and they had been changed from the original settings that I had chosen, once again!

  The only way I can restore my original settings is to click on the default button on the tab "Advanced" and then double-checking the options I want.

  This happens at least 8 times a day and makes me crazy, because I am constantly having to check if the Windows Firewall settings are as I put them in the first place.  If they are not, I have to go through this process over and over again.  By making print a nightmare, but it's also annoying to have to keep control of the settings.

  Ask everything you big strong guys out there to give this 'small' a helping hand technique with this one, please.

  Thank you very much
  ~ Alison Xx

  Hello

  1. is there any firewall other than Windows Firewall running?

  2. using any antivirus?

  3. Since when did you start to deal with the issue?

  Method 1: It could be virus issue. First we will analyze the system for infections using the Microsoft Security Scanner which can be downloaded from the link below:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• Driver HP Deskjet 3745 for sharing with Windows 7 on my home network

  I have a HP Pavilion pc (XP) and want to share my HP Deskjet 3745 printer with a laptop on my home network, but its operating system is windows 7. Is this possible? How?

  Thank you.

  Hello

  Not sure if it will work, but there are pages that expose how try to be available on the internet. The link below will take you to one. Keep in mind that this is not a site of HP and so HP is not responsible for its content.

  http://www.howtogeek.com/HOWTO/12246/share-a-printer-on-your-network-from-Vista-or-XP-to-Windows-7/

• Windows 7 not remembering home network

  I have 2 computers that are configured in a wired network:

  Laptop1 - Network switch - Laptop2

  For security reasons, there is no access to the internet.  (For the few times that it is necessary, we use wireless.)

  Because they are only 2 computers, I've set up static IP addresses to Ethernet adapters (IPs private / class C) and told me the network card it was a home network and then set up a homegroup.  (They are also in the same working group).  Since there are only two computers on the same subnet, I don't bother to set up a DNS gateway or default.  The only thing that caught my interest is that the NIC kept showing "unidentified network" - which could be the cause of the problem described below.  (Because this network does not have the particular signs, I expect that's why Windows confuses.)

  After everything was set, I was able to share the files from one computer to another.  I have had absolutely no problem.  Unfortunately, every time restart us the computer, the two computers stopped talking.  When I went back to look at the network, it has been reset to the Public network instead of :ome network I selected previously.  What happens on BOTH computers.  Once I tell the computer in a home network, everything works perfectly - I don't even have to Setup homegroup.  Unfortuantely, as soon as we reboot a computer, this computer forget and returns to the Public network.

  Other information:

  Both computers running with administrative accounts.  Because of custom software, we are unable to upgrade to 8.x Windows or Windows 10 right now.

  I did some research and have seen many answers/different answers to this question.  #1 response seems to be to update the NIC drivers and I'm looking into that.  Is there something else I can look at?  Maybe add something to the network configuration to manually tell him it's the same network?

  Found the workaround:

  http://www.SevenForums.com/tutorials/71408-unidentified-networks-set-private-public.html

  While I don't really 'it' because it is automatically the network a network of 'work', it allowed me to progress.  When I had to add a 3rd computer to homegroup, I had to change the first computer network temporarily work back home in order to get the 3rd computer to join the homegroup and then after the system has restarted, he returned to 'work', but the HomeGroup continues to operate correctly.

  I don't know if this is addressed in Win10, but it would be nice if manually configure us a computer on a network, so we can manually set as call it and the private setting would stick without having to enter in the security policy.

• A windows 7 computer cannot access a file share on another computer windows 7 in a home network, but others can.

  Hello

  "You don't have permission to access \\computer x\c. Please contact your network administrator to request access to ' I want to be able access all computers on my network, whether they are Windows 7 64-bit or Windows XP Pro machines.

  All computeers can access Internet and my printer.

  I'm unable to access files on one of my computers on my home network to a PC running Windows 7. The same PC can access most of the other files on the other PC. I have a mix of XP Pro and Windows 7 and they are defined as a working group not a homegroup. To complicate the isue is a laptop computer that cannot access this computer either. But the facts are that two Windows 7 PCs that appear to have identical settings cannot access both another windows 7 PC.  I guess that the unreachable PC appropriate sharing as other computers on the network can access.

  How can I change the target of the PC share permissions so I can access it from any computer on the network? Or maybe the question is from the other computers that access computer is blocking access to the setting on the PC that can't?

  All computers can view the readers there is a problem if a drive is empty, why report it: "you are not allowed..." »

  Hello

  Refer to the suggestions for the following links and check:

  Share files with anyone

  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-in/Windows7/networking-home-computers-running-different-versions-of-Windows

  I hope the above information helps!

• Please can someone explain why the windows Installer keeps appearing when nothing is installed? Any way to stop this?

  Why the Windows Installer keep popping up, either on a web page or an e-mail to the office when nothing is installed.  No way to stop that... ?

  The desktop of your computer, click on the tab "Start", usually located at the bottom left of the screen (on Vista, it's maybe the windows symbol instead of the word 'Start').

  Now, find and click on the program title 'run '. Vista users can locate this program by typing "run" in the area of research at the bottom of the menu 'start '.

  Once you open 'Run', type 'MSCONFIG' in the empty box and click 'OK '. This will open the System Configuration utility.

  With the open System Configuration utility, select the tab "Services".

  Scroll down the list of services (it may be advantageous to click on the 'service' column to sort the services by alphabetical order) until you find the program "Windows Installer".

  Now, click on the checkbox next to the name of the Windows Installer and click on the button 'Disable' at the bottom of the Configuration of the system.