Windows 7, LaserJet 1200 and collating copies

Similar Questions

• Windows 7 64 bit driver for HP LaserJet 1200

  Available on the web sites of HP drivers do not work on our 64-bit Windows 7 computers.

  Is anyone know about a feasible driver?

  Choose which product you use and follow the appropriate steps for the Laserjet 1200 Series drivers.

  http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?lang=en & CC = US & prodTypeId = 18972 & prodSeriesId = 29789 & TaskID = 135

• Installation Failed for HP Laserjet 1200 Series in the new computer laptop with Windows 8, 64-bit

  Name of the product - HP Laserjet 1200 Series PCL 6 Driver

  Operating system: Windows 8 Home Edition, 64-bit

  Error message: cannot find the series 1200 on the network. To locate manually click ok...

  Changes Made - this is an installation on the new laptop, in Windows 8, 64-bit

  Description:

  1 installation of an existing network, consistedof a desk and two wireless laptops.

  2. the two portable computers have Windows 7, 64 bit. Above the named printer is accessed successfully for laptops.

  3 replaces one of cell phones with 8 64-bit Windows.

  4. the path of the 1200 series is: wireless printer to the router, router to the desktop via ethernet, from desktop to a printer via a cable.

  5. the configuration of the wireless printer is

  Name: HP Laserjet 1200 Series PCL 5

  Port: \\Central\HPLaserj

  Printer: HP Laserjet 1200 Series PCL 5

  Driver: HPMCPM25. GPD 5.8.2008

  Problem

  Impossible to re-create this path with Windows 8, 64-bit configuration.

  a. when I try to download a driver always end up with a file called UPD-pcl6 - x 64 - 5.6.0.14430

  This seems to be a universal PCL 6 printer driver, can successfully decompress the file and create a folder

  b. during installation, I can see the desktop ICON printer (name: \\central\HPLaserj); So far so good

  c. process is unable to locate a driver and ordered to locate manually.

  d. accessing the HP Universal Driver files fails because a driver is not found.

  e. caraa attempt enter fails because you can't enter address above (\\central\HPlaserj). Cannot enter HPLaserj for the address, which obviously does not work.

  f. when the installation showed a list of drivers, the only one that I found was a universal PCL 6, which is what I thought, I tried to download the original.

  This set up has worked successfully to Windows 7 64 bit. It seems that I need help much more expertise to guide me through this whole upward.

  Problem solved.

  This link gives a good overview of the solution

  http://www.sadjad.net/blog/2012/11/28/Windows-8-shared-printer-driver/

• LaserJet 1200: Laserjet 1200 printer drivers / Windows 10

  Greetings,

  My HP Laserjet 1200 worked properly without any problem when I downloaded and installed Windows 10 (64 bit) in early November 2015.  I upgraded to Windows 7.  16 December 2015, there was an important 10 Windows update that is automatically installed on my system.  The Setup takes about half an hour or more.  After installation and restarting, the printer would not print.  The printer prints a test page if I hit the button on the printer.  However, there seems to be no communication between the computer and the printer.  The Laserjet Printer is a former model of 2002 and is connected via a parallel port.  I tried in vain to install new drivers on the HP site and have exhausted all other troubleshooting provided tools.  I've not seen this issue addressed on the Forum.  It was suggested that we put security update 12/16 may have eliminated the ability to connect via a parallel port.  Any help/suggestions would be appreciated.  Look forward to having to buy a new printer when this one works perfectly well!

  Shortyccg

  With a parallel port, it is a known problem with the latest update of windows 10.  Go to Device Manager and in the tab change the Port settings to "never use an interrupt" to one of the other options.

• HP LaserJet 1200: HP LaserJet 1200 connected via USB to the PC with Windows 7 is not redirected in DRC

  Hello.

  HP LaserJet 1200 connected via USB to the PC with Windows 7 (32 bit) and works fine (latest drivers via Windows Update installed).

  But when I have connected via RDC (Remote Desktop Connection) for PC with Windows XP and try to print from this PC to LJ1200 - it is not redirected in a remote desktop session and I did not see in printers and Faxes folder.

  Other printers from PC with Win7 works fine via DRC (XPS Document Writer and PDFCreator).

  During this time when I do the same thing from another PC with Windows XP, LJ1200 (connected via USB to the PC) works very well through the DRC.

  Anyone know how to make LJ1200 to be redirected in a remote desktop session?

  Thanks in advance.

  For more information, here are 2 possible solutions:

  1. put two computers in the same workgroup and then share the printer and install from the remote computer.

  2. best solution: install on PC with Windows 7 drivers for Windows XP (PCL6) - it works very well as a redirected local printer via DRC!

• Windows 7 hates my HP LaserJet 1200

  Windows 7 really hate my HP LaserJet 1200 USB.  Windows 7 is supposed to have built-in support for LaserJet 1200.  Windows 7 says the built-in driver is not the suitable driver for my device and it will not let filled manually install a driver, even if I could get one.  Any ideas on how to successfully install a printer HP LaserJet 1200 on Windows 7?

  Windows 7 64 bit and HP LaserJet 1200 driver via perfect patch of network:

  1 Panel---> devices and printers

  2. Add a printer

  3. Add a local printer

  4 create a new port---> use (Local port)... .next

  5 port---> location of printer type name: type (\\FIN-PC\HPLaserJ)... .next

  6 install the driver of printe... Select (Windows Update)... wait a few minutes and much more

  7 select "HP"... then "LaserJet 1200 PCL 5' list... next

  8. wait a few minutes or more... life would be not that simple if you don't try.

• Windows 7 think no driver USB there is for the HP LaserJet 1200 printer

  When I plug my HP LaserJet 1200 printer in my Windows 7 laptop via a USB cable, the correct driver should install automatically, but it does not work.  The message error is "HP LaserJet 1200 printer doesn't have a driver', which is not true.

  This driver used to work properly on Windows 7.  It is suspected that HP could inadvertently, recently broken the driver.  Do you have someone at HP, or at Microsoft, typo or mistranscribe the string 'HP LaserJet 1200' in a version of the driver, or in a catalog that refers to a newer version of the driver?

  To be clear: I is not a smart solution that puts my system in a strange state, I do not understand, or want to try different things that might work, but (as far as I know) could corrupt vaguely a few hidden files or reference system.  My system is now in a clean and orderly condition.  I wish him stay that way.

  I'm looking for the standard driver auto installation correctly according to the standard method, as it should.

  Since the first meeting of the problem, I erased from my hard drive and reinstalled fresh (not just recovered, rescued or updated, but wiped and freshly reinstalled) my operating system to Windows 7.  It made no difference.  Therefore, the problem seems not to be a problem with my installation.  It seems rather to be a problem with the driver, a catalog that refers to the driver or something of the sort.

  We realize that the HP LaserJet 1200 is a pretty old printer, for which we could expect little support.  Despite this, would be the person at Microsoft, who knows printer drivers, check that the "HP LaserJet 1200" string not inadvertently has been misspelled or mistranscribed in a recent version of the driver, or in a catalog that made reference to a recent version of the driver?  As I said, this driver used to work.

  If the driver is listed, then you don't have to go through the company if in the update catalog. That's the good news.  The bad news is that I do not understand why it has not installed.

  Go to devices and printers.  If there is anything listed in the category 'printers and faxes', select it.  Once you select an item in this category, you will see a 'Print server properties' button at the top of the printers and devices window.  Click on this button.

  If there is nothing in the category 'Printers and faxes', you will not be able to get the print server properties button, so instead, open a command prompt window (click on the start ORB, type cmd.exe and press enter), type the following in the black command prompt window and press ENTER:

  printui/s/T2

  Whatever it is, you will end up the "Print server properties" window, like this:

  

  I guess that you will NOT see a list for the Laserjet 1200.  Before you add it, however, click the "Ports" tab  You have a Port which is presented as "DOT4_001" (the number may be different at the end)?

  Unplug the printer if it is connected.

  Back to the tab drivers, click "Add" and you can start the Add Printer Driver Wizard, which is very similar to add an assistant of the printer that you saw earlier.

  Click on 'Next' and check the box next to your system - x 64 for 64-bit and x 86 for 32-bit.

  Click "Next", select "HP" and "Laserjet 1200 Series PCL 5" and click "Next"

  Click 'Finish' to close the wizard

  You must return to the Ports of the print server properties tab and now the driver for the "Laserjet 1200 Series PCL 5" should be included in the list

  Close the print server properties window

  Restart the computer

  Connect the printer.

  It installs correctly now?

• HP Laserjet 1200 does not print in Windows 7

  I have a HP Laserjet 1200 connected via the USB port of a laptop running Windows 7, 64-bit.  I installed the driver 64-bit windows 7 to the printer through the Windows Update process.  I added it as a local printer as described in this thread.  The driver installs and seems fine.  (The icon of the printer under "Devices and printers" is another printer, but I don't know which is relevant).  When I try to print a test page or any other page, work flashes in the queue of the printer window and disappears quickly, but the page does not print.  I get no error message.  Any suggestions?

  Hello

  I suggest you go through the following link.

  Printer in Windows problems.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  You can also try downloading the driver from the manufacturer's website, install on your computer.

  You can download the driver from the following link.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=29790&prodTypeId=18972&prodSeriesId=29789&swLang=8&TaskID=135&swEnvOID=4063

  You can also refer to:

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

• HP LaserJet 1020 and Windows 8

  Hello

  I have a HP 1020 Laserjet connected to one of my Windows 7 x 64 PC, the printer is shared on my home network. Everything works fine if I feel of other widows 7 x 64 PC on the network.

  I converted a PC Windows 8 x 64 and I can not print any file more on the printer that is connected to Widows 7 PC on the network.

  I can connect to the printer and print a windows test page 8 PC, but any other application will fail to print, I can see the file in the queue of the coil, but it never prints the application on windows 8 just pointing out that it stops working.

  The problem is very easy to reproduce, just try to print any document. IE: With Notepad or any other application from a windows 8 PC to the printer connected to a windows 7 PC on the same home network.

  Yet, if I connect the printer locally on windows 8 x 64 PC on a USB port, the printer seems to work very well.

  Looks like there is an incompatibility with the current driver available trying to be rolled up a file to the network for HP 1020 laserjet printers, I don't see one for windows 8...

  A specific driver for HP 1020 will be available for windows 8?

  Thanks, F.G.

  Hi fg2001,

  Windows 8 drivers for your printer are now available on the HP site.

  You can visit the following link to get the drivers for your operating system:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&lang=en&LC=en&product=439320&task=&

  Shlomi

• HP LaserJet 4050: Error printing on HP Laserjet 4050 and 4100 Windows R2 2012

  We have recently migrated our Windows Server 2003 environment to Windows Server R2 2012.  Some of our printers, specifically HP Laserjet 4050 and 4100 no longer work with Server R2 2012, even if we downloaded the drivers for Windows R2 2012 from the Internet HP site and made sure the printer was using the new driver from HP.  When you try to print from the server or terminal connection, we get a "printing error" in the status field in the queue.  We do not know what to do to get these printers to print.  We have several of them and redirect users to print to another printer which is further so they can print.

  Do you have any suggestions?

  Best regards

  Paul

  If you cannot print from the server, then on the server, the parameters must be incorrect.  You can even ping the printers on the server?  Since you have more than 1 printer with this problem I doubt that all the printers hp all wrong.  Something else in the way that you configure these printers must be the issue.  If you can ping and also access the web server, then I think you have problems with active directory.  If you can not ping so perhaps have changed the ip addresses or the road you take these ip address has changed.

• HP LaserJet 5200 and Windows 7. Using CorelDraw X 5

  I have a HP LaserJet 5200 and use Windows 7.  When working in CorelDraw X 5 I'm unable to change the frequency of the pattern of dots when printing color separations.  Never had this problem until we started using Windows 7.  All advanced in CorelDraw user settings are enabled.

  Any help would be appreciated.

  Hello USA-Laser-Pro,

  The HP LaserJet 5200 is a printer. I suggest you post in the forum for HP Business Support for a better chance to find a solution.

  Here is the link to the Board Commercial Laserjet:

  http://h30499.www3.HP.com/T5/printers-LaserJet/BD-p/BSC-413

• Duplex with our laserjet HP4100 and Windows 7 network printing

  We have two new HP with Windows 7 desktop computers and you try to use the front and back of our network service HP laserjet 4100 dtn can you suggest the correct drivers or settings please?

  Hi, this might be the question why his does not work.

  It's a bug in Windows 7. The duplexor is reported as not installed by default, so you'll have to change that.

  Go to the Control Panel, find the devices and printers, then click on it. Then right click on your printer icon and choose 'printer properties '. In the new screen go to the "Device settings" tab and under "automatic duplex print unit" set installation options on installed. Should be on is not installed by default, so change installed, then click on apply. Restart the software and perhaps even your computer and check that duplex printing is an option now.

• OfficeJet 5740: Windows 7 Officejet 5740 prints multiple copies of Excel (2000)

  Nine Officejet 5740 e-all-in-one printer connected to the Acer PC under Windows 7 Pro (64 bit) SP1. Printer driver 17.59.00.6180

  Will not print multiple copies of a small document (2000) Excel (128kb)

  Print large files PDF and Word and several copies, but not from Excel (2000)

  It will be wound up to two (maybe three copies) but displays only the first and then fails with the Excel error message "your file could not be printed due to an error on HP Officejet 5740 Series (network) on Ne01...". »

  Followed by the HP error message «Unable to communicate with the printer...» »

  I think it must have something to do with the way Excel print multiple copies queued several unique copies that print spooler one by one. It feels as if the spooler is being overwhelmed by the simple copies repeated being pulled on her by the Excel print routine.

  Any advice appreciated

  Greetings @tessdesigns,

  Thank you access the Forums from HP Support for extra support! I see that you have problems printing multiple copies of Excel. I will do my best to help you with this problem.

  The application you are printing from, go to file, print, number of copies, select 2. Uncheck the Collate box. You can now change the number of copies. Collate should now stay disabled.  Try to reprint the document of several pages.

  If the problem persists, perform a clean boot on the computer and disable the Antivirus software. How to perform a clean boot in Windows. Then try to reprint the multiple documents.

  If this helps you to find a solution, please click on the button "accept as a Solution. If you wish, to say thank you for my effort to help, click on the 'Thumbs Up' to give me a Kudos. Please let me know the results. Good day!

• LaserJet 1200

  Where are the Windows drivers for printers laserjet 1200?

  No driver windows here

  http://h20566.www2.HP.com/hpsc/SWD/public/readIndex?TaskID=135&prodNameId=29790&sp4ts.Oid=29790&AC.a...

  The link I gave above seems a bit flakey - it worked fine last night but this morning when I tried it it says that nothing is available.  Earlier it is back to work, but I don't know if you can find what you need.  There are UPD for PCL 5 and 6 and PS drivers.  There is also an that Resource Kit directors might have what you need, the link is here.  May not have what you need - I doubt that there is much support for a product that was introduced in Windows 3.1 calendar...

  The HP printer administrator Resource Kit (PARK) is a collection of tools, scripts, and documentation to help administrators print install, deploy, configure, and manage the HP Universal Print Driver. The PARK contains software tools supported and not supported, scripts and documentation.

• HP Laserjet 1200 print settings

  I have acquired the LJ 1200 and force them to change the print density of 3 to 5 settings and the height of 10-12. I was delivered with a CD1 [N° C7044-60132 ver. 6] and tried to download it to my computer Dell Optiplex GX280 using XP. When I look in start-> Control Panel-> I see HP Laserjet 1200... Under Tools, I see 'Uninstaller', but there is no indicator giving any MB of software installed!

  More I can't find any Configuration of device on the CD utility.

  I have the correct CD that comes with the printer or is it a CD2?

  BTW: I can't use this printer, if I do not change the print settings because I intend to use this computer/printer using BACK 6.2 and Wordstar and Foxbase [for back]. The LJ1200 is a replacement of a HP Laser lllp that worked wonderfully [it has now made the soul] and automatically prints the reports created in Foxbase [with the supplied generator] in point 17. The LJ1200 is printing in 10 points and while in WS, you can set the printing code withiin a document I do not know if you can in Foxbase.

  Any suggestion would be appreciated.

  P.S. This thread has been moved to the Web Site of Business Support for LaserJet. Forum Moderator - HP

  Chris

  Cannot send the prn files to the printer via copy/b controls using start-> all programs-> Accessories-> command... Get the message "Windows cannot find" copy/b "make sure you typed the name correctly." "

  Using start-> cmd... Message "System can not fine the specified file.

  SOLUTION: A 'programme' within Foxbase + sending code using compressed to the printer.

  ?? CHR (27) + '& k2S '.

  Now I'm looking for a code to change the print density [and have posted it on a new site, I signed up with today.]

  Thank you for your support of my problem.

  Ken