Windows 7 - line monitor extreme latency

Similar Questions

• Keyboard shortcut to move a window between two monitors instead of drag and drop.

  I want a quick way to move a window from one monitor to the other in a double configuration monitor without having to drag the window with the mouse. This is particularly useful for full screen windows since to move, I have to exit full screen, catch them with the mouse and drag them to the other monitor. Ideally, I want something I can do with a keyboard shortcut.

  I don't know if this exists, I couldn't find it in a list of keyboard shortcuts. I think it would be an improvement for anyone to use multiple monitors which has good reason to need do to switch between several programs. Since windows looks at multiple monitors and identifies each in the settings of customization like 1, 2, 3, etc, it would make the most sense for me to have one high and one low. So if I have a window screen 2, I can hit a keyboard shortcut to move it to the same spot on monitor 1 (low) or monitor 3 (upwards).

  Maybe it exists in form some and I don't find it not, but if not I think it would be very useful, especially for anyone doing graphic design or programming work.

  (Also I filled out the form for that matter like windows 7, which is what I use at home, but he put it under the XP forum since that is what the computer I write from is running on.)

  Use the following key combination to switch between screens.

  "Windows key + SHIFT + key.

  Detailed instructions:
  Press in and hold the Windows key and then add and hold down the SHIFT key. While now hold both hit the left or right arrow key to move the current active window left or right.

• Move windows between multiple monitors

  Move windows between multiple monitors

  You can easily extend your Windows desktop across multiple monitors. A display that spans two monitors or more significantly increases your screen area so that you can drag windows and program icons anywhere on the desk of theextended.

  By default, when you connect another monitor, the image of your desktop appears on each monitor display. Before you can drag a window from one display to another, you must change your display setting toExtended. For more information, see Set up multiple monitors.

  I can't do it in my compuer whay?

  You can't do that if you are under Vista Home Basic.

  http://Windows.Microsoft.com/en-AU/Windows-Vista/troubleshoot-multiple-monitor-problems

  Solving the multiple monitor problems

  Here are solutions to some common problems with connecting, setting up and working with multiple monitors.

  http://Windows.Microsoft.com/en-AU/Windows-Vista/multiple-monitors-frequently-asked-questions

  See if the information above helps you.

  See you soon.

  Mick Murphy - Microsoft partner

• Quickly move the maximized window from one monitor to another

  With Vista, is it possible to move a maximized window from one monitor to the other with a single click or via a keyboard shortcut (instead of having to UN-maximize, drag and re - optimize)?  I can't download and install 3rd party applications to achieve.

  Hello j8mcmurtrey,

  I was unable to find a shortcut to perform the action you want. However, you can have a look through the available shortcuts that you is provided through Windows Vista here.

  Hope this helps

  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message when you import fixed active information in Microsoft Dynamics GP: "no active window. (Line #14) »

  I am trying to import all capital companies fixed my GP CSV file using the import of GP function. The way in which the fixed asset module has been implemented initially was incorrect, so I removed all the goods that are currently in GP and am importing all goods to the GP again using the import function. I've set up my CSV files and when I import the file I get the following error message: "no active window. (Line #14) ». Can someone tell me what this means and how to fix it?

  Thank you.

  Hello

  Given that the problem is related to the dynamic group policy, please ask your question in the TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home?searchTerm=SSRS%20and%20Dynamics%20GP%2010.0

• Why Windows 8 Pro becomes extremely low FPS on my high end Graphics Card compared to Windows 7 that had ZERO lag problem!

  Since I bought Windows 8 Pro for my Gaming Office all I have is having problems with the game, like Midtown Madness 2 allows to get as stable 60 fps but now on windows 8, I'll have 3 to 10 fps and GTA IV gets like 8-24 FPS on this graphics card high end and why Windows 8 Pro becomes extremely low FPS on my games compared to Windows 7 which had no problem who worked as its supposed to work. and it is a High Spec computer to run all games maxed out with all the problems of lag, but for some reason, there are problems of lag. I had uninstalled the graphics drivers in the control panel and start in SafeMode with Fusion driver to remove the remaining data from pilot and I reinstalled the last chart and without success, I always get problems.

  my processor is an AMD Phenom II X 6 1100t, graphics card: Sapphire AMD Radeon HD 7970, 16 GB DDR3 1333 Mhz Ram my computer cannot be low power!

  Actually my problem is solved now. what I did to disable Hyper-V in windows features. Windows 8 is now faster than windows 7 in games or even better.

• I have just insalled LR6 into the dev module, I see no picture, but only a blue window with lines through it. Can you help me??

  I have just insalled LR6 into the dev module, I see no picture, but only a blue window with lines through it. Can you help me??

  In the Lightroom preferences, uncheck the box, 'GPU use' on the performance tab.

• Firefox-new-window command line option does not as it should.

  When using
  Firefox-new-window "http://www.ebay.com/" "http://store.steampowered.com/'"https://mail.google.com/mail/u/0/#inbox".

  command-line or batch file, it does not open 3 windows with each of the links, it opens 2 and in one of them, I'll take 2 tablets!

  Is this normal behavior? How can I open 3 individual windows?

  Hello, use this:

  firefox.exe -new-window "http://www.ebay.com/" -new-window "http://store.steampowered.com/" -new-window "https://mail.google.com/mail/u/0/#inbox"
  

• Firefox remember its position of the window on my monitors when closing and re-opening.

  Before the latest updates firefox remember the position of the window when he was finally stop. Now, it still load upper left full screen on my first monitor.

  Win7, especially in XP mode because I don't like aero.

  I move Firefox to the monitor I want.
  

  Expand it to full size.
  Take the title bar and knocking it against the top of the screen.
  When the outline appears, let go.

• "Windows XP, Microsoft Monitor Out, Version 5.1 (C) 2007 (build 2600.xpsp_sp3 - gdr.120821 - 1629: Service Pack 3).

  Whenever I use playback on my computer, it will play and then suddenly cut. If I raise "Monitor Out" and just slightly touch the fader of wave slide, it immediately to life and continues for a few seconds more and again, when I "first" put the plate which displays these cursors of fader on the monitor screen, who says "monitor, vague, Swsynth and CDplayer, the wave is always to the off position. until you drag the vague fader button upward. He always falls on the position until I'm playing another song, and does it again! It's really aggravating, Help!

  Ron

  Hi Ronnie Bishop,

  Welcome to the Microsoft community.

  Do you receive an additional error message/code?

  Did you of recent changes to the computer before the show?

  How long takes this issue into the computer?

  We will check if there is an error with the device in Device Manager:

  a. on the desktop right-click on my computer and click Properties or open Control Panel and double-click the system icon.

  b. in the System Properties window, click the Hardware tab.

  c. in the hardware tab, click Device Manager .

  d. check if there is no yellow exclamation that the device does not work.

  Post back with the result.

  Post back with the result.

• Windows XP, both monitors. Mouse problem

  When I move the monitor from left to right, I have to move from the upper right to the lower left corner. How can I change this behavior?

  Looks like you have your left monitor configured as the monitor right and vice versa.  All you have to do is to swap their position on the screen of monitor properties.  How to proceed is covered in the section "Organize multiple monitors" in the following Article:

  "How to configure and use multiple monitors in Windows XP"
    <>http://support.Microsoft.com/kb/307873 >

  HTH,
  JW

• How to get full screen windows media center monitor config

  units Windows media center config monitor, how to get full screen like boxee and Houla, have an acer 23 monitor

  Hello deanallen,

  Thanks for posting on the Microsoft answers Forum.

  I suggest that you look at the tutorial on the Microsoft Web site for media center. It will help guide you through the configuration steps.
  http://www.Microsoft.com/Windows/Windows-Media-Center/learn-more/custom-settings/tutorials/custom-settings-picture.aspx

  If this is not answering your question, please let us know that you do not give many details.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows 7 move / resize windows on the monitor power cycle

  I have a new ultimate install W7 on a new PC (AOpen DEX4501 w intel GM45 graphics). I installed the latest graphic drivers Intel 8.15.10.2202 and all the updates of windows relevant.

  It is connected via HDMI to a HD of Grundig Misuro TV. My resolution is set to 1600 x 900, windows recommended resolution is 1920 x 1080, but appears poorly, so I do not use it.

  When Windows is asleep, or I turn off (and then later) the monitor, most of the windows are moved/resized to the top left with the lower right corner to 1024 x 768.

  Firefox, Excel (2003), resize/move, Outlook windows Explorer (2003) do not move/resize.

  I have a screen of Samurize (like Gadget) on the right who someimes is moved to the top left, but not this morning. The windows resize/move also happens when Samurize is not running.

  I found three other entries related to this;

  • http://social.answers.Microsoft.com/forums/en-us/w7desktop/thread/b79d2dbf-F1A6-4850-9dce-75a52fb1e619
  • http://social.answers.Microsoft.com/forums/en-us/w7desktop/thread/ee8540c4-554e-4467-B304-1f5808e3d11b
  • http://social.answers.Microsoft.com/forums/en-us/w7hardware/thread/84f41660-1933-4109-9b13-1ea8a1c27be7

  They do not seem to have been resolved for a long time.

  It is a question of monitor Windows power management, can it be fixed please it is very annoying.

  I don't recommend W7 to others with outstanding issues.

  I've found a workaround.
  With the help of Sysinternals ProcessMonitor I found that Windows was accessing the following registry path;
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\GraphicsDrivers\Configuration

  My system has three entrances;
  DELF003YY7707BR0MUL_30_07D7_6A ^ 9A3774EB79DEE3E3E38496CC7DF4D936
  QHD32000001_31_07D6_D5 ^ 63E1ABDD175E7871DCAEB710418A0F75
  SIMULATED_8086_2A42_00000000_00020000_1010100 ^ CDE365D1B3F0942F0CF38BFB8E127AB4

  Each is a tree called '00' two keys are
  PrimSurfSize.cx
  PrimSurfSize.cy

  Under "00" is also another branch called '00' two keys are;
  ActiveSize.cx
  ActiveSize.cy

  The first two configs (IE... DELF00 & QHD3...) the above keys were 1440 x 900.
  While they were not involved.

  The third (SIMULATED...) have been set at 1024 x 768.

  I changed to 1600 x 900 and the problem was solved.

  Further, I changed resolution (via Control Panel) 1920 x 1080, returned the issue of moving/resizing,.
  but the lower right was set at 1600 x 900, IE the SIMULATED... settings.

  If for any reason any of the configs does not set correctly.

  I don't know why there are three configs, I never used a single monitor.

  Hope this helps someone out there...

• Installed Windows 7 - Second monitor not detected

  So I just installed Windows 7 Ultimate (x 64) and everything that happened very well, but my second monitor is not detected. I am running Windows Vista and it worked but since I updated it stopped working, I tried 3 different monitors and have failed to update my drivers.

  Hey Zei,

  You need to update your video driver. In this case, you can contact your manufacturer to have updated.

  Thank you.

• Windows 7 double monitors - turn off a monitor causes Office to reorganize resulting in substantial losses of productivity.

  I have 2 monitors connected to a card nVidia FX 580 running Windows 7 Pro 64 bit. A monitor is linked via DVI and the other through DP (Display Port).

  If I turn off the monitor of the RFP, I hear the windows sound indicating the material has been "deleted." When I turn on the monitor, I hear the sound of new hardware, windows re - detects the monitor as if I just installed it and my layout any icon on the desktop and all the windows, I had open are then all rearranged and takes a long time, re-organization to come back to where I was.

  I leave my PC on 24 hours a day for several reasons - and for years have always just had my monitors turned off when you are not using it.

  I need to be able to turn off my monitors without windows deciding that I "removed" a monitor.

  I work for a software company of medical imaging, where we provide the complete hardware and software solutions for use in radiology departments in hospitals. These systems are usually 3 or 4 connected monitors, all via DP these days. Due to the possibility of the desktop users get messed up, if they happen to turn off a monitor, we can not install systems with Windows 7.

  While many may see this as nothing more then a disadvantage, it is a show-stopper as what we concerned. Yet as I have not found a viable solution to this problem.

  So here's the question: how to disable this new behavior in Windows 7 and allow him to understand that the monitor has not gone away and that the Office should not be changed simply because the monitor is off?

  Thank you.

  I wrote a small utility to fix this problem. It is still very thrown together, but Open source, so you can compile sources if you have security problems.

  I hope it works for you!

  http://www.ninjacrab.com/persistent-Windows/