Windows 7 Matshita DVD-RAM UJ - 825S failure does not.

Drivers?

Hello

Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.

Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.

Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.

Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit

Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

Your CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116

The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461

When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052

Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems

CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/

Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems

Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.

Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

===============================

Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.

Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.

Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

-----------------------------------------------------------------------

You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.

Forums - a lot of expert real help
http://Club.myce.com/

CD/DVD units
http://www.myce.com/storage/

Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html

I hope this helps.

Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

Tags: Windows

Similar Questions

  • Equium A200-1V0: DVD-RAM UJ-850 s does not read data discs

    My laptop seems to have decided to stop reading data disks.
    However, there is no problem with the audio CD, but when I insert a data disc such as the software considers the disk is empty and try to format the drive.
    I searched internet day for solutions and tried without success to the following:

    Removed the UpperFilters and LowerFilters in the registry.
    Uninstalled and reinstalled drivers.
    Bought DriverWhiz (waste of money!)
    Tried to access disc command prompt that generated the message "incorrect function".
    Tried to use the enforcement function and access an exe file that I know is on the disk, but it comes up saying I need to format the drive
    Uninstall service packs
    I even thought it might be something to do with the MagicVirtual drive I had installed so I uninstalled completely which
    I uninstalled real player

    I'm about 3 minutes to destroy my laptop so any help would be appreciated.

    Laptop: Equium A200 - 1V0
    Drive DVD - RW: MAST * a DVD-RAM UJ-850 s ATA
    OS: Windows Vista

    Hello

    Deleting upper and lower filters was the first idea that I'd like to share with you, but it seems that you have already tried this solution proposal

    How about windows boot CD or a linux live CD?
    Is this possible?

    If not then I thing that the question could be linked to the wrong material work I m thinking on the issue of laser lenses eventually the laser lens can not calibrate properly and this could be a problem

    In this case, only a replacement CD/DVD drive can help greet

  • Carpet * a DVD-RAM UJ-820 s does not work in Satellite M30X 122

    Hello!

    I am owner of a Satellite M30X - 122 Notebook with Mat * one reader CD DVD-RAM UJ-820 s.

    In recent weeks the disc suddenly stops working during normal use, no error message, in Windows XP System Device Manager all entries are ok, the drive is enabled and visible.
    !! Optical media access LED lites permanently, so that the reader is always available!
    I have tried using different CD, reboot Notebook, removing battery State is always the same, LED blinks several times then it lites permanent.
    After a few hours this phenomenon disapperars and I can use the drive without any problems. ! It is very annoying!

    Someone at - it experience with this problem? Please let me know.

    Don't you think that the drive needs to be replaced?
    In this case (I tried a Mat * a DVD - RAM UJ-820 s on the www, I found none just renovated, new readers) does anyone know where to get a new, or a compatible UJ-820 s drive.

    Thanks in advance.
    Have a good evening.

    Hello

    I don't know where you live and can not recommend any PC shop but you can order it by the authorized service partner.

    You can also view s manuals for Satellite M30X, and page 5, you will find a list of all compatible optical disk drives. Do not buy the same but much better if you want. I hope that this info will help you find the new drive.

    Troubleshooting I can't say a lot. Try to remove the device from Device Manager and reboot the device and test again but with original media only. Make sure that you can see the contents of the CD or DVD using Windows Explorer.

    If nothing is done check for replacement.

  • Carpet * a DVD-RAM UJ-850 s does not read blank media - need new firmware

    Hey I have a laptop Equium only around the age of 4 months.
    Had nothing but problems with the CARPET * A DVD-RAM UJ-850 s ATA Device drive.
    I need to know where I can get the update of the firmware.

    Firmware for it, that she will not read blank media.

    I agree with master... I don't know what kind of problems you have, but if the player doesn't work properly, it must be replaced. The warranty is certainly valid and the nearest authorized can help you with it.

    Maybe you made a mistake. Take your laptop to the nearest service and show them what you mean exactly. Here, we can only speculate what may be your problem.

  • Carpet * a DVD-ram UJ-845 s does not work

    Hi everyone, I'm a little crazy for my dvd player, about 14 months I bought my 3rd toshiba laptop already.

    In the first (Satellite 5200) dvd player (combodrive with installation of dvd ram built in) has not already after a few months. I brought this back to Toshiba customer service twice and replace that thing (mast * a) twice as well... Then, the player broke down again.

    With the new Toshiba, I bought (Qosmio G20) I just got the same problems, dvd and cd function work correctly sometimes (unfortunately sometimes not as well), but the player (mast * a UJ-845 s, DL DVDwriter) recognizes not all all DVD ram.

    I hope someone can give me a hand with this problem, I'm really a little crazy about it now, and I don't want to keep running and visit the Toshiba Service Center every 2 / 3 months for the rest of my life...

    Thanks a lot anyway!

    Best regards, Erik

    Hi Erik

    It is very strange that you have problems with sides. Over the past 7 years, I worked on 5 different Toshiba laptops and I, but really never had no problem with the chance. I always use the same empty media TDK (DVD-R, DVD - RW and DVD-RAM). Everything works fine.

    I have always taken out of pre-installed software and use Nero since the beginning. I really put t understand why the DVD-RAM media are not recognized, but please do not forget the DVD-RAM driver is pre-installed correctly.

    Have you noticed that with the factory settings?

  • Carpet * a DVD-RAM UJ-820 s does not recognize blank DVDs

    My laptop recently stopped recognizing blank, or I burned when I put them in the DVD player.
    The drive is a CARPET * a DVD-RAM UJ-820 s and it was working fine until last week when I tried to use the ASHAMPOO Burning software.

    He does not even recognize any MOVIE DVD I put in the drive, but it doesn't seem to have a problem with a music CD, I tried.

    Someone to help they could offer cause I'm running out of space and I really want to delete my files.

    Thank you

    Hello

    It looks a bit like a malfunction of the equipment. Maybe the lens of the drive can not calibrate correctly.

    Another clue;
    Have you tried to delete the upper and lower filter registry entries?
    Try it. Sometimes such procedure can simply bring the reader to life.

    The detailed procedure and description has been published here in the article Microsoft Knowledge base:
    http://support.Microsoft.com/kb/314060/en-us/

    Good luck

  • DVD-RAM UJ-820 s does not work on the Satellite A50 - 543

    Hello

    My present DVD-RAM UJ-820 s on Satellite A50 543 is not working correctly, original part is very expensive. Can I order to cheaper NEC AD - 7543A or NEC AD - 7540 A, but I don't know is it compatible with my Satellite A50 543 or not.

    Who can help me?
    Thanks in advance

    Hello

    From my experience not every disc is compatible with your laptop. It depends on the master / slave / parameters c - salt.
    The settings on the disks online slim for laptops is not editable as on desktop drives by putting the jumper.
    The thin line command does not support riders, and so the firmware controls the settings.

    But dnf666 already replaced the drive on sat 5200 and maybe your favorite player might be compatible

  • Re: Qosmio G20: DVD-RAM UJ-845 s does not read CDs or DVDs

    I'm a big supporter of Toshiba product.

    Please help me

    Given that I had to do to update form my * Toshiba Qosmio G20-123 *.
    My * DVD UJ-845 s * do not read any CD or DVD.
    Before that, he worked a lot of good. But unfortunately now, he does ' t read anything.

    The system to recognize it. The driver is installed and working properly.

    After I installed supports DVDRAM of Toshiba.
    The same thing occurs when playing a CD, the system tells me:

    * E: / not accessible *.
    * incorrectness function *.

    I try with a program on the net but no way.

    I was well able to put the original firmware, but I could not find.
    If someone can do a dump of the original Firmware for me it will be a miracle for me.

    Help, please.
    My great respect.

    I think I can help you:

    Go to my computer right click on the CD/DVD drive.
    Now go to properties; Click the Recording tab and check "Enable CD writing on this drive".
    Now click on apply and restart the laptop.

    Check of workaround and post comments

  • Problem - Windows 8 and Matshita DVD-RAM UJ8C2 with touch ideapad P400

    Hello

    I have a touch ideapad P400. I have Windows 8 and a drive Matshita DVD-RAM UJ8C2. The drive is not showing in my computer and do not read any disc I put in. In the devicemanager, I get an error code 19. "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) ». I've updated the drivers. Re-installed drivers. Restart the computer. Removed and re-installed the drive. None of this has worked. Know what to do now?

    If you installed the latest version of the attempt of drivers gear once again, uninstalling the drive through device and then Manager reinstall the drive.

    If still a problem, uninstall the drivers of material from "Uninstall a program", and then restart the computer.

  • This device cannot start. (Code 10). Matshita DVD-RAM UJ-850 s ATA device not found.

    The operating system does not detect the Matshita DVD-RAM UJ-850 s ATA device on my Toshiba Satellite. I tried Microsoft Auto difficulty and it didn't fix it. The CD player worked last week when I installed ITunes software. Now, the driver cannot be detected. Known corrections or suggestions?

    You must uninstall, then reboot and let the program installation is the device when it restarts. If the correct drivers are found, it will install. In case of failure, it's probably because Search Setup default is files of the user and not the C:\windows\inf or directories c:\windows\system32\drivers\, which you can specify by choosing to install from a list or specific location, and then by typing or by going to the it. If this fails, check the bios settings.  But most likely your original driver was silently replaced, by a program system file or a third-party application. If need be, you can try a system restore to return the parameters of your system to a point in time where everything worked. I would try one more point to restore and not a newer version, preferably a restore point launched machine, not one caused by installing or removing a program or a driver. "THE BEST THING TO DO IN THIS WORLD IS A WRONG ANSWER! "I"DON'T"WINDOWS...". »

  • supports matshita dvd - ram uj-850 s NOT recognized, Mats_run.dvd cancel installation of PowerShell

    Updates in security plague devices on my Toshiba Satellite? Matshita dvd - ram uj-850 s can notrecognize the media .  I tried to run Mats_run.dvd.exe and it cancels the installation of PowerShell and said run again later.  I checked the registry for PowerShell and he's not here.

    Updates are downloaded automatically but are installed manually. Microsoft.NET Framework 3.0 is installed.  There are 2 hard drives usb, e and h. The internal hard drive is c and the dvd drive is d.

    I downloaded PowerShell for English x 86, and it also cancels the installation.  This facility will write on e drive unless the e reader is currently offline.  It seems to me that installation should go in one of the program files. No matter what.

    I heard Japanese factories to boost productivity by having models of foremen (also known under the name of straw bosses) in the break for whacking room. MicroSoft is expected to provide a game that allows you to the storm of MicroSoft when you feel frustrated. Laugh for everyone.

    I tried the registry filter entries delete and it does not correct.

    The drive reads some DVD.  The one I use is readable on other computers and was burned at the origin of it. This drive is able to read the DVD right here.

    DVD with files on them are not read.

    I cleaned the drive with a DVD-rom cleaner.

    Audio_TS, Video_TS structure is recognized on a DVD so that the reader is able to read the DVD.  It seems to be a Windows problem.

    Combustion works very well.

    Hey, Arch.

    I suggest uninstalling the drive in Device Manager and restart the computer.

    If this does not help, you can try to uninstall all your computer disc burning software, if you have the means to reinstall, and then reinstall the drive.

    The Powershell do not install cannot be bound.

    I suggest to run a full system scan after you have updated the antivirus definitions.

    Chris
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Driver for Matshita DVD-RAM UJ880AS Vista does not refresh

    DVD does not, the driver updates

    Matshita DVD-RAM UJ880AS

    Toshiba Satellite A500, Windows Vista

    The DVD will be able to, but it won't play.  Device Manager says

    "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »

    the button "Check for solutions" does not solve the problem

    Tried to update the drivers, but it says I have the most up to date.

    Microsoft fix - it didn't resolve the problem, or the other.

    What's next?

    http://support.Microsoft.com/kb/982116/en-AU

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    See if the information above solves the problem.

    See you soon.

    Mick Murphy - Microsoft partner

  • Average cd - / dvd-station is niet leesbaar (MATSHITA DVD-RAM UJ870BJ ATA Device)

    My medium in cd - / dvd-station is niet leesbaar (MATSHITA DVD-RAM UJ870BJ ATA Device)

    Hello

    See this page to select your language:

    http://support.Microsoft.com/common/international.aspx

    ====================================

    Or sorry that it is area English.

    Left click at the bottom of the Microsoft Community page

    English and set your language.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Matshita DVD RAM UJ850s ATA optical drive will not read burned media, running Vista

    * original title - CD/DVD unit read not "burned" cd *.

    Hi, there are about 6 weeks, I had to do a recovery because a virus in my PC, the problem is that now the optical unit reads no CD, it reads 'original' CD, DVD (original and burned) but not burned CD specially those who have programs on them, could be a driver problem, but so far I have not been able to solve the problem , and I m not sure the original driver are in Sony's site, or any other Web site.

    PS the thing Burns CD and they can be read after that that they were "closed".

    I have a VAIO VGN-N330FH, running Vista Home Basic 32 bit (Spanish), the model is a Matshita DVD RAM UJ850s ATA Device.

    Hello

    You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
    Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
    correctly.

    Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

    Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

    CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
    tolerances. They may be delivered, but it is generally more economical to replace the disk.

    Several good info here:
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
    http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

    ===========================================

    This troubleshooting could not help if there is alignment and/or wear issues however it
    a shot.

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://Club.myce.com/F61/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Driver MATSHITA DVD-RAM UJ8E1 error

    I have a brand new Acer Aspire 571 Windows V3 8 & the first time I tried to use the DVD player, to rip a CD, nothing happens. I checked the devices & printers in the control panel and the device 'Aspire' shows a yellow triangular exclamation point (need to troubleshooting and status driver error). I troubleshoot the device & advises I reinstall when I apply this fix all I get is found problem MATSHITA DVD-RAM UJ8E1 has a driver problem. Not fixed.

    I have had only the laptop for a few days & have spent a lot of time to transfer & sorting my library top via an external drive, so I am reluctant to take it back to the retailer. I had much rather fix the drive but need help!
    Thank you in advance, a forum user first.
     
    [Moved from comments]

    Hi Delphine,.

    Try to remove the entry from Pfc that relates to the pfc.sys.

    To remove Pfc input double click LowerFilters and under value data, remove Pfc > OK

    Create a system restore point beforehand and restart the computer after.

Maybe you are looking for