Windows 7 Media Center does not start from the icon...

Similar Questions

• Windows 7 Media Center - does not start due to a software restriction policy preventing the departure upward.

  Installed Windows 7 upgrade Windows Vista a couple of weeks.  Media Center used to work under Vista, even if I don't use it much.  I can't even start program.  Using a HP Pavillion system.  Any ideas gratefully received.  Thank you

  @ brooon:
  While the suggestion of man will not help you directly (you have Home Premium, have no GPEdit), you can always check the registry keys that are affected by the policies mentioned.
  (GPEdit is a nice interface to various registry settings, anyway.)

  Take a look at the following keys:

  HKLM\Software\Policies\Microsoft\WindowsMediaCenter\MediaCenter HKCU\Software\Policies\Microsoft\WindowsMediaCenter\MediaCenter

  A 0 = MC ValueData can work; 1 = MC is disabled.

  Standard WARNING: improper modification of the Windows registry can have consequences and can prevent your system become unbootable (possibly requiring a reinstallation of the operating system.)  Be careful!!!

  Don't change anything here yet.  It just open regedit and take a look at these two keys.  If they are there, after the ValueData displayed.  If they aren't there, after that they aren't there.

  -Chris [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Windows 7 - Media Player does not start after the upgrade. Cannot update Windows media player either

  I have long used now on Windows 7, Windows media Player and just got an update from Micorsoft. Set, now when I try to open the drive it tells me the the wmplayer file has a version number of 12.07600.16415 where 12.0.7600.16667 was expected.

  Windows media player is not adequately at a standstill and must be reienstalled.

  Then wonder if I want to install the player from the microsoft Web site. When I check the Yes box, I go to the site and he informs me that the version that I already paid for only a few months ago on my computer because my computer is relativley new, cannot be downloaded.

  There are no other options to fix the problem that caused Microsoft with the update. I tried to do a restore but it then cause a problem which made the player doesn't do not not the CD to record the right as he said that I had to get the new drivers that microsft does not automatically download drivers when they remove them in this process. But again, no tell me what I need drivers. I tried to switch on my computer systems and to find them this way, but it says I have already that I need on my computer?

  What should I do? I need this ASAP as I am a singer and rely on this process for my concerts and other...

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Pavilion Media Center does not restart after the full system recovery. get the error code 0 x 4001100200001005

  Pavilion Media Center does not restart after the full system recovery. created recovery disks when purchased new. get the error code 0 x 4001100200001005

  Original title: recovery problem

  Hello

  According to the HP Support Forums, this error may be to do with the hard or for other reasons.

  You never have it replaced with a no HP bought in car?

  Read these threads HP on your error code:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/recovery-disk-error-0x400110020000-1005/TD-p/22936

  http://h30434.www3.HP.com/T5/desktop-recovery-reply-only/trying-to-recover-an-old-PC-error-code/TD-p/964509

  If the original hard drive, press F11 at startup to start the process of recovery partition HP, did you recovery disks of.

  See you soon...

• Windows Media Player does not start, and the accidents of life Mail

  Hi all

  I have a problem: I'm using Vista Home Basic version US, MS 2 MS and my Windows Media Player does not start, Windows life Mail (worm 2009) crashes when I want to write a new e-mail message and does not work Windows 7 Upgrade advisor. So there must be a common problem.
  Any suggestions how to solve this problem would be highly appreciated.
  Marek Köter

  Hi Marek D,.

  A. what happens when you start the media player?

  B. what happens when you run the Upgrade Advisor?

  C. when he last work very well?

  D. recent changes made on your computer?

  E. you get any error message?

  Please answer in return.

  For issues related to windows live mail, you can post your queries to the discussion of direct mail.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player

  Bindu S - Microsoft Support

• My C50 - B Satellite does not start from the HARD drive

  Details of the machine: -.

  Model number: PSCMLA-03F07Q
  Serial number: XE343127P

  Computer does not start from hard drive. No error message, just the start Toshiba at the end of self-test screen.

  Sometimes a reinstall of the operating system seems to correct the problem, but then he would go again, now the problem is consistent.

  I reduced the possibilities to a fault of BIOS, reasons.

  System boots from USB with no problems. Installation of operating systems is done without error. SMART hard drive data indicates a perfectly healthy hard drive. Memcheck will return no error.

  The obvious solution is to reload the BIOS, just reset it doesn't help. But that is the problem.

  1.4 BIOS update that the Australian site offers is a Windows program and the computer cannot start Windows.

  Obvious answer is to use a bootable USB key with an operating system 'live' on this issue, but all of these systems are Linux and the update of the BIOS is a Windows program. So much for smart solutions.

  Downloaded Bios version 1.7 of the European site but the iso inside the rar file is empty, 25 MB in size but nothing in there according to Linux. Tried to run his program on a Win7 64 bit computer and it returns an error that it could not find the correct iso file.

  I submitted a support request by email to Toshiba, but they believe that it could take three days to get a response, so I thought I would ask here as well. Can someone tell me please to a working copy of the latest BIOS update disk for a laptop Satelite C50 - B? Note: this model does not have a CD player so iso should be compatible with USB boot.

  See you soon,.

  Andrew.

  Hello

  From my experience that I n think that BIOS update is the final solution for you. When you set the default settings of the BIOS disk HARD appears correctly in the BIOS settings?
  HARD drive is also offered and listed as boot device when you enter in the start using F12 at startup menu?

  What happens when you start using recovery image installation created recovery USB key (I hope that you have created a)?

  Offer BIOS updates are versions of WIN and can be performed by running the Windows operating system.

• Media Center does not start

  OK, here's my question. I am running Vista Ultimate 32 Bit and my media center works not period. I get the error message "Windows cannot open this program because it has been prevented by a software restriction policy" contact admin system, it's me. I do not assign any software restriction rule, then, what do I do, tried the remove files in ehome, did not work. also tried SFC / Scannow - Ditto...

  Well what now?

  Confused beyond belief

  Hello

  1. What are the files you delete the eHome folder?
  2. don't you make changes before the show?
  3. is the computer connected to a domain?

  Deletion of system files will result in a malfunction of the operating system, therefore it is strictly not recommended to delete any system files.

  Step 1: Restore the computer to an earlier time.
  1. Click Start, type system restore, click System Restore in the list.
  2. choose the appropriate date when the computer was working fine.
  3. follow the instructions in the wizard to complete the system restore process.
  For more information, see this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Step 2: We recommend that you cross check if the problem continues in a new user account. To do this, try the following steps.
  1. open user accounts by clicking the Start button, clicking Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.
  2. click on manage another account.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. click on create a new account.
  4. type the name you want to assign to the user account, click an account type, and then click on create an account.
  5 restart the computer and log on to this account and check if you are able to launch Windows Media Center.

  For more information about the new user account, see this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Try the steps and post back with the results, so that we can help you further.

  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Pavilion m7650n PC Media Center does not start XP

  1. model: m7650n

  2 product number: RF254AA

  3. product name: HP Pavilion Media Center PC

  The first error message is a black screen with white text:

  Windows could not start because the following file is missing or corrupt:

  \WINDOWS\SYSTEM32\CONFIG\SYSTEM

  Which suggests a corrupted registry.

  Unfortunately, the system does not boot the recovery partition (F10).

  I found that an article at support.microsoft.com/kb/307545 suggests starting the XP installation CD. I started a XP Media Center CD. That will load the drivers, but after saying Windows startup, he abandoned a BSOD:

  STOP: 0X0000007B (0XF78D2524, 0XC0000034, 0 X 0 0 X 0)

  Suggest to change the SATA mode in the BIOS RAID, AHCI or IDE. None of this helps to either.

  Scanning of the hard drive on a well known system clean some viruses, but that has not changed the situation when you try to start the HARD drive again.

  Any ideas?

  Thank you

  Laboratory TimC

  Hi Tim,.

  Put the drive in another PC that you did before and back up your critical data. You can reformat the hard drive. Then reinstall the drive in your PC and set the SATA to IDE controller mode and save the setting. Reboot into bios and make sure that the resulting setting is saved.

  Now, reboot and use your HP recovery disks to return your PC to a first day of factory condition.

• Windows vista media center does not I can uninstall and reinstall?

  Windows vista Media Center has been installed, but will not respond. How can I fix this problem?

  Hello

  You cannot uninstall or reinstall

  Try this:

  Run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

  http://support.Microsoft.com/kb/928228#appliesTo

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• 64-bit Windows 7 Media Center does not detect not tv tuner

  Hello

  Windows Media Center is not able to detect my usb hybrid tv tuner in trying to set up live TV. When you try to solve any problems are detected, I downloaded the latest drivers and install and the device is listed as working properly in Device Manager.

  It is a kworld atsc usb hybrid tv stick ub445-u

  I am at a loss on what to do because there are several product reviews that say the tv tuner works very well with windows 7 with no hiccups...

  Any help or steps would be appreciated!

  Update

  Everything uninstalled and reinstalled media library but her has not helped either

  KWorld hybrid TV Stick UB445-U USB 2.0 is a Windows 7 Media Center compatible tv tuner card, and there is no need to install any third-party application.

  You can create a different user account with admin rights to check the issue.

  http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=KWorld%20UB445-U%20Hybrid%20Tuner%20Stick%20USB%20TV%20Tuner%20Card&v=KWorld&uid=UB445-U&l=en-US&pf=1&pi=9&c=TV%20Devices&sc=TV%20Tuners&os=64-bit

• Windows 7 32 bit does not start after the installation of the need for assistance

  I have an iMac 21.5 inches (mid-2011) with 8 GB Ram, 2 TB SSHD, new HL-DT-ST DVD - RW GA32N and tried to install windows 7 (32 bit) on using Boot Camp Assistant.

  I already downloaded and copied software 4.0.4033.zip Boot Camp here-> https://support.apple.com/kb/DL1630?locale=en_US for my 16 GB Pen Drive MS-DOS (FAT32)

  The installation was successful, and windows 7 loads just fine 1st time, I created UserID and password, settings etc... using the apple keyboard then installed the drivers from apple on this issue of my 16 GB USB key. Seems my Magic Mouse works but my keyboard is not detected

  Then I tried to restart so the changes would come into force, and since then my Windows will not start or run Windows 7

  Now if I start my iMac hold down the Option key, I get Macintosh HDD, windows, recovery 10.11.4 and DVD. If I select Windows or Windows DVD it starts Booting then black screen followed by this Message on the screen «Press a key to boot from the CD or DVD...» »

  If I press any button it starts booting from DVD and gives me the option to install Windows and if I do not press a button some then nothing happens

  Windows does not start a BootCamp HDD and I'm left with no option but to press on the button / stop to stop iMac.

  Fortunately my El Capitan works well, but my Windows will not start. I tried 2 times install windows 7 32 Bit on my BootCamp HDD.

  So any help, I do not understand what am I'm doing wrong, I would be really grateful if someone who knew bootcamp can guide me so that I can run Windows OSX on my iMac.

  Thanks in advance.

  Remove the DVD, boot in OSX and after the release of the following Terminal commands?

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• Left without head does not start from the phone.

  Hello

  I have a problem with the part without a head.

  When I try to launch the app to Eclips, the app will be charged for phone and rotate the UI and parts without a head.

  Now if I restart the phone, headless part does not start even when I open the UI part,

  The headless part is to call the block function.

  Any idea will be very appreciated!

  Thank you!

  Your HL will start automatically in these two scenarios:
  (1) the application is installed on the device (there is no front)
  (2) the phone is restarted-> which is the magical part where your file bar - descriptor.xml is to record your target without head to call when the OS up bb.action.system.STARTED action.

  If you want your HL to be launched at the start of the user interface, you must manually call.

  Look here for an example of coding:
  https://github.com/RodgerLeblanc/HeadlessLight/BLOB/master/HeadlessLight/src/applicationui.cpp#L34-L...

• Organizing element does not start from the 12 EP welcome screen

  Organizing element refuses to boot from the first item welcome screen 12. I had the same problem with PSE12, which was solved by systematically starting from the taskbar. I failed to get the screen of welcome to PSE12. Ss12 and PSE12 parpadean normally also. I could produce a film without difficulty. Pluggable 8.1 Windows on an ACER Aspire 8920 32-bit with 4 GB of memory. Although having as bought PSE12 and ss12 together I only install ss12. Plug-in these Adobe products for several years.

  My catalogs are all in C:\Users\All Users\Adobe\Elements Organizer\Catalogs.

  Drag-VId

  A few considerations...

  1. How did you get your 12 elements Photoshop and first screens welcome of the 12 elements that set up

  First elements welcome screen

  

  2. If you open first elements 12 to the Expert workspace and click the Organizer tab at the bottom of the workspace Expert, can you open the workspace elements Organizer 12 from there? If you add multimedia/Organizer items, it works?

  3 have you tried to delete the elements Organizer 12 parameters to remedy any malfunction of the elements Organizer?

  Local disk C

  Users

  Owner

  AppData

  Roaming

  Adobe

  Elements Organizer

  12.0

  Organizer

  and in the record of the Organizer is the file psa.prf that you remove or disable. Folder Option show hidden files, folders and disks should be used to see the full path.

  Please review and then let us know of your progress.

  Thank you.

  RTA

• Vista Media center does not start

  From the start, I get the warning box that Media center has stopped working. It says Windows will close the program and notify me if a solution is available. When I close the program - banner in the blue windows media center remains here and begins to the microsoft update page. I go through the update page, and it says that my system is up to date and working correctly.

  I received a rundll error message and did a fact a reg clean. It always does the same thing: what I can try next?

  Hello rspenyvr,

  If you create a new user, you have the same problem with the newly created user account? I found in other posts that somehow the user account is corrupted and will help create a new account to correct the problem.

  Answer please come back and let us know.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• WIndows 8.1 does not start from the HARD drive

  Put a new WD HDD in a Samsung laptop. Install windows 8.1 form DVD and restart get an error "tried all options press F4 to start recovery.

  He wants to boot from the DVD, but I have the HARD drive as the number of boot option in the bios. What's new?

  The symptoms you describe seem to indicate that the startup information has been lost of the HD.  The HD is faulty or something destroys the startup information.

  Try to do a repair from the installation DVD.