Windows 7 my the media game is slow and still the error who say it has stopped working

Similar Questions

• I'm having a problem at the opening of the pdf document.  I get the error message: 'Adobe Reader has stopped working ".

  I'm having a problem at the opening of the pdf document.  I get the error message: "Adobe Reader has stopped working" then I get Windows to search online for a solution, but then my document is closed. I tried to uninstall and reinstall Adobe Reader XI, restarted my computer, but it did not help.  I get the same message. What should do?

  Can you open Reader by itself?  If so, check that disable the Protected Mode improves the situation [Edit |] Preferences | (Improved) security].

• After the update to the latest version of iTunes, it includes the error message 'Push Apple has stopped working' and ITune could not be started

  iTune cannot be started on Win 7 after recent update with error message "Push Apple has stopped working"

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

  More information area has direct links with the current and recent if you have problems to download, need to revert to a previous version or try the version iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.

  Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.

  TT2

• The screen flashes and goes out, error: "intel graphics driver has stopped working".

  Original title: Intel graphic driver

  My computer screen starts flashing, then goes and then this message appears "intel graphics driver has stopped working" when I try to get the answer it says "windows cannot download solution at Thøis" I tried a lot but he continues to themselves, what can I do?

  Hello

  (1) when encounter you the problem?

  (2) have what troubleshooting measures you tried?

  (3) remember you to make changes to the computer before the show?

  You can try the following methods and check the status of the issue.

  Method 1:

  Configure the computer to clean start State to check software conflicts.

  http://support.Microsoft.com/kb/929135

  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 of the above article.

  Method 2:

  Uninstall and reinstall the display adapter drivers.

  (a) start Control Panel, click hardware and sound and then click Device Manager.

  (b) to expand the node that represents the type of device you want to uninstall, right click on the entrance to the unit and click on uninstall.

  (c) in the dialog box confirm the device removal, click OK to start the uninstall process.

  (d) when the uninstall is complete, the site of the factory driver download and install the drivers.

  (e) after installing the drivers, install the latest updates.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Flash doesn't work is not on the computer, the error: "Flash 11.5 has stopped working".

  Original title: Flash Player 11.5

  I use Firefox as my operating system. I have updated Flash Player to 11.5 but it kept crashing so I uninstalled and went back to version 10.5. Since then every time I get a Web site that uses flash Player my posts computer 11.5 has stopped working and it is close and looking for a solution to the problem. These message windows continue to flow upward and I can't close them and it prevent my computer answering commands.
  I don't understand that I do not even have the software on my computer no more.
  Can someone please?

  Download and use the program to uninstall Flash Player from Adobe, it should get rid of the last vestage of 11.5

  http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html

  J W Stuart: http://www.pagestart.com

• Continue to receive the Error Message: "SystemK Module has stopped working".

  Update Google Earth yesterday.  Since then, received message: "SystemK Module has stopped working".  Any ideas on how to get rid of this message?  Thank you, Janet

  

  I solved the problem myself.  He returned to an update to Google Earth.  Another search engine has been installed (I tried to abort)... that's what has caused this problem.  Once I deleted all the files from search engines and (Yes, yet another program associate (!), the problem solved).

  Thank you.

• Get the Error message host application has stopped working

  What is a catalyst control center? I get a warning saying that my catalyst control centre: host application has stopped working. is it important, and should I re - download? If so where what to do?

  Hello

  The ATI Catalyst Control Center is a control application of 3D acceleration that allows you to control features of your graphics card. ATI Catalyst Control Center can be used to fine-tune your graphics settings, enable or disable connected display devices, and change the orientation of your desktop, etc. Many features show you a preview of your changes before applying them.

  You can download from following link catalyst control center and check if the problem is solved or not.

  http://support.AMD.com/us/pages/AMDSupportHub.aspx

  Hope that helps.

• How to fix the error "Adobe Photoshop CS5 has stopped working"?

  I click it and it loads the page with credit, but an error pops up right after that gets done. How should I do?

  Hi DakotaMerrival

   

  1. what operating system is installed on the computer?
  2. for how long have you been faced with this problem?
  3. did you sons of recent change the computer?
  4. have you tried to reinstall the program?

  Do check and provide us with the information about the installed operating system-

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  
  Method 1:

  You can also view the article provided below and the support link and check if the steps to help you resolve the issue.
  http://kb2.Adobe.com/CPS/408/kb408849.html

   

  Method 2:

  You can check if you face the same problem of access to adobe application in a clean boot state. To perform the clean boot follow step 1 mentioned in the article below, and then try again check in the clean boot state -

  http://support.Microsoft.com/kb/929135

  If the problem is resolved check which service non-Microsoft is the source of the problem; referring to article and following the other steps.

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  a. Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  b. on the general tab, click the Normal startup option and then click OK.

  c. When you are prompted to restart the computer, click on restart.

   

  Method 3:

  If the problem persists, I suggest you to contact adobe for assistance on the question support.  You can check the links below for assistance-

  http://www.Adobe.com/support/

  http://forums.Adobe.com/index.jspa

   

  I hope this helps.

• Once the programs are open a window pops up to say "program has stopped working". Even the programs that are running in the background when starting up are close. Help?

  Yesterday I connected my laptop and when I tried oppening a program a window pops up say "program has stopped working". I opened the control panel to start the troubleshooting, and another appeared window "Control panel has stopped working". I tried to open microsoft word and another window popped up, it is true, that you guessed it "word has stopped working". Does anyone know why all of a sudden nothing works?

  Hello

  try a SafeMode system restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• SPORE on Windows 7 installs but doesn't start. Message says "Spore has stopped working".

  
  

  I recently bought the game spore original and installed on my compaq cq5320f. It installed correctly but when I try to run the game, the screen goes out for a second, then an error message box saying "spore has stopped working" it self closes and says windows is working on a solution and if it finds one, that he will let me know. the only option is to close the box.
  
  
  I tried everything, including a spoke with a representative from EA that had me do a start-up in minimal mode, of the United Nations and to reinstall and even suggested I buy a new video card: I did. I upgraded to the Radeon 4850.
  
  
  I am the only user on this computer and have had norton antivirus running on it every second because she was online. When I right click on the SPORE icon, it does not give my an option to run the previous version and the same error occurs when you try to run as an administrator (whose profile is already anyway).
  
  
  I am at a loss here. I know that's not the game, because I installed it on my laptop (running Vista) and it works fine.
  
  
  Please... help?

  Hey mervcasey,

  Please test this behavior in the new user account. Not sure if this will help, but it is worth looking at.

  Method 1:

  Create a new user account for testing purposes.

  For a full tutorial on the same, see: create a user account

  Method 2:

  If method 1 is the problem, you might be interested in this article to help with the same problem.

  Difficulty of a corrupted user profile

  Method 3:

  If both methods fail, please check your event log and see if there are any notable event that can help to shed light on the case.

  Reference:

  What are the information contained in the logs of the event (Event Viewer)?
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• around the world in 80 days has stopped working, said gameinst request was missing can anyone help

  around the world in 80 days has stopped working.   Telling me gameinst request failed, can anyone help.    Thank you

  Hi Paul.fishers5,

  Thanks for posting your question.

  I suggest completely uninstall Adobe and Java on the computer and then try to play the game.
  Download the latest version of Java using this link http://java.com/en/download/index.jsp

  Download Adobe flash player, use this link http://get.adobe.com/flashplayer/?promoid=BUIGP

  Let us know if that helps.

  Kind regards
  Clement Kumar.

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

• The App - 'MP Navigator EX' has stopped working.

  Original title: * e-mail address is removed from the privacy *.

  I use an operating system of Windows 7 Vista and my printer is a Canon PIXMA MP240 printer.  The App - 'MP Navigator EX' has stopped working. Cannon Tech told me it's a fault of Windows updates.  Windows tech people said they could solve the problem, but it would cost me $100,00.

  Any future assistance or suggestions would be most appreciated.

  Thank you.

  E-mail address is removed from the privacy *.

  SL

  Either you have windows 7 OR you have vista (not both).  Since MP Navigator is a product of Canon, they must support on windows with or without updates.  It is to them to be compatible with windows, not the reverse.

  Not sure who said they could fix it for $100, but I suspect that they were crooks.  Supports MS windows (and they maintain no more than standard support for vista) it would be free.

• Who knows what the solution to the message "Microsoft keyboard driver has stopped working?

  Who knows what the solution to the message "Microsoft keyboard driver has stopped working?

  Hi Raymond,

  Thanks for the quick response.

  The question you posted would be better suited in the Logitech Forums. I would recommend posting your query in the keyboard Logitech Support.

  Keyboard Logitech support

  http://www.Logitech.com/en-us/support/keyboards

  If you need further assistance on all issues related to Windows, just tell me and we will be happy to help you.

• Every 10 minutes, I get a popup window of Microsoft Windows error: Dell Support Center has stopped working

  Every 10 minutes, I get a popup window of Microsoft Windows error: Dell Support Center has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

  I uninstalled Dell Support Center via the Control Panel, run the virus and malware scans installed a restore of a month before this problem point and continues.

  Hello

  Dell has their own Forums of Support for you to enquire about Dell software issues.

  http://en.community.Dell.com/support-forums/default.aspx

  See you soon.

• I got the error message "Spooler subsystem app stopped working and was closed".

  I got the error message "Spooler subsystem app stopped working and was closed" when I tried to print a large PDF file.  I can not load a printer now.  What is the next step?

  Hello

  You should probably check with Support from Adobe and their communities and Forums in case
  There are known problems.

  Adobe - Support
  http://www.Adobe.com/support/

  Adobe - communities
  http://www.Adobe.com/communities/

  Adobe - Forums
  http://forums.Adobe.com/index.jspa

  ====================================

  Check with the printer manufacturer for updated drivers and support for known issues.

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  The value of all Services back to their default values.

  Start - type into the search box-> Services find top - make a right click on - RUN
  AS AN ADMINISTRATOR

  BlackViper - for Vista SP1 - Services - all return to their default values.
  http://www.blackviper.com/2008/01/28/black-vipers-Windows-Vista-Service-Pack-1-service-configurations/#more-3020

  BlackViper - for Vista SP2 - Services - all return to their default values.
  http://www.blackviper.com/2009/05/31/black-vipers-Windows-Vista-Service-Pack-2-service-configurations/#more-2991

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">