Windows 7 Netbook screen resolution/problems to install Uniblue Powersuite

Similar Questions

• Screen resolution problems (Windows 10)

  I downloaded the latest trial 9 Captivate for Windows 10 and screen resolution problems. Basically, making the software unusable. A lot of screens and dialog boxes seems larger than the current window, they are in, making the right and downstairs parts invisible window (usually, this is where the 'OK' and 'Cancel' buttons for example).

  I'm Captivate on a laptop running 64-bit Windows 10 (Sony Vaio with an NVidia GT 640 M map graphic with the latest drivers)

  Does anyone know how to fix this? Here are some examples:

  

  

  

  No retina.

  What is the size of the police on? Win10, it is often larger than 100%, which is not really necessary for your resolution, but that's a retina display. I am using Captivate on Win10, but Surface Pro and laptop have a retina display.

• Windows 8 does not work on my netbook. screen resolution is too small.

  Windows 8 does not work on my netbook. screen resolution is too small. Miicrosoft does not refund my purchase.

  I had the same problem with my Asus EeePC Netbook. The highest resolution was 1024 x 600. I was able to change it by changing the settings of register of Display1_DownScalingSupported in 1152 x 864 (two entries) from 0 to 1. Proceed at your own risk.

• Satellite C70 - A - 16 L - screen resolution problem

  Hello

  I recently had a screen resolution problem with my laptop (C70 - A - 16 L).
  The max screen resolution which is imparted to me is 1366 x 768, whereas before I think he used 1600 x 900.

  I tried the latest drivers, Bios, etc. and have also restored the operating system to a previous backup, as well as a new installation.
  I also tried to roll back to Windows 7 (with proper drivers). They all offer the same problem.

  This new maximum resolution display correctly - as if the LCD does not deal with the timings of 1366 x 768.
  I believe that the Panel is OK and the problem he reports the EDID information properly - to force windows to use the new resolution.

  Is there a download monitor.inf file that can be used to bypass the EDID reported by the Panel?

  Kind regards

  Antwist.

  If the right to display drver is usually installed everything should be OK.
  Have you installed Intel driver Toshiba download page 9.17.10.3062 version?

• Screen resolution problem. Cannot set above 680 x 480.

  Screen resolution problem

  I have a dell latitude d630 2.5 GHz computer laptop under XP Professional 64-bit operating system.  The screen resolution will not be set above 680 x 480, and when I try to increase the computer stops with a black screen message that don't stay long enough onscreen to read.  Dell advised that they don't or support this machine with the XP operating system and that they have no drivers or other fixes for the problem.  I hope that you will be able to help and thank you.

  Hi dduck11,

  ·         What is the default screen of the laptop resolution?

  You need to update the graphics (video) drivers for the laptop. I see that there are Windows XP drivers available for the same thing. Download and install the updated drivers to see if it helps.

  Drivers & downloads for Latitude D630

• Windows 7 screen resolution problem

  To make the question as concise as possible, here's what I have.

  -VM with Windows 7 Enterprise, version 6.1

  -Vmware tools installed from ESX 4 upd 1 host

  -Latest installed Windows updates

  -Windows Device Manager shows no problems with any material

  -Display the Vmware SVGA 3D (Microsoft Corporation - WDDM) driver

  -

  ---

  List of valid modes revealed in favor up to 1280 X 1024 (32 bit), 85 Hz

  Problem is managed by using a console session maximum screen resolution is 1280 X 768, 85 Hz.  Definition of a higher resolution reveals a black screen that is not visible.  Is it possible to get a better screen resolution, or am I stuck?  I'm trying to get a PCoIP view works correctly and I think that this may be a contributing factor.  In other words, I am able to connect, but screen turns and stays black.

  By default the display protocol: PCoIP

  Allow users to override the default protocol: False

  Quality of Adobe Flash: do not control

  Adobe Flash limitation: disabled

  Thanks for any help you can provide.

  In my env, I got following problem:

  Check in your virtual machine video memory = 4 mb, if it is please check your Total RAM of VC/ESX management video video card, if it's something like 36.18 (it's what I had), change it to 32/64 (valid integer). Fixed my problem for XP and Win 7 VM.

  See you soon,.

  Andr3y

• Windows 7 edition dark screen resolution problem

  Hi I HAV dell inspiron 1564, core i3, n using win 7 xdark edition, please tell me how cn to increase my screen resolution of 1280 * 720,.

  Hello

  Windows 7 dark editions are pirated copies

  they are not supported by Microsoft

  for all your support needs of contact where you downloaded it from

• Portege 7220 screen resolution problem

  I recently bought a laptop portege 7220 and windows me was installed until I can get more ram added for win xp. The problem I have is that the screen resolution is set at 16 bit color and it is stuck in resolution 800 x 600. I can't go to 1024 x 768 pixels. So instead of having a display full screen, everything is displayed in a small box on the screen. I have tried to install the drivers from the toshiba site and even have local pc tech shop trying to fix it, but to no avail. Does anyone know how I can sort this problem because it's a great laptop and I want just full screen to work. Thanks for reading and any advice/info on the left.

  Hi, this must be a driver issue; your 7220 native resolution is 1024 x 768, that's why 800 x 600 is displayed in a window

  I suggest that you switch to Windows 2000, it works perfectly on a 7220 and has the lower memory requirements than XP
  In W2k there is most appropriate drivers available and with the drivers from the toshiba site, your problem should be solved

  BTW: Make sure that your BIOS settings are good (especially the "extended-mode display"), you should consider updating your BIOS to the latest version

• After restoring my system to Windows Vista, my screen resolution is incorrect.

  Screwed up resolution :(

  I had to restore my computer to Windows vista after putting 7 window on it... now my screen resolution is turned off, it is the top of the screen to the bottom, but has 2 black bars on the sides... Ive already tried to settle the reso to max, but this isn't the problem. Help

  Apparently, that's what to do, another great problem, I can't get my internet to work at all, it says there is no network, I can't spend all the discovery network on or anything, and I have NO idea where the original disc is provided with the computer :( Hating technology now

  You have a computer that works (obviously).  You probably have a USB stick/thumb drive/CD or DVD, you can use and a way to write, huh?  Something like that?

  Get what you need to the manufacturer of the computer support and the web page of the driver of your make & model of computer (that you try to fix) while on this computer to work and put these files on the mentioned media.  That put media into the computer you try to set and use the programs installation either him or copy them to the desktop of the computer in question and install from there.

• High screen resolution problems

  Hello.

  You just bought a Dell XPS lapptop with screen resolution 3200 x 1800 and windows 8.1. After installing photoshop CS6, the interface of the program, the menus and icons are extremely small and almost impossible to see. This also happens in the bridge, but not in Lightroom. Grateful for your help.  Best looks/janis lukas

  panohori19836 wrote:

  Still, I'm working on a big 27 inch as well with a 2560 x 1440 resolution, and I don't have this problem.

  You need get a better grip on the resolution.  2560x1440px and 3200x1800px are not resolution, they are a number of pixels displayed your displays.  For you you need to take into account the size of display resolution.

  Both of your displays have same 16:9 aspect ratio but have different sizes, and the number of pixels.

  Office 27 "screen displays 2560 x 1440 pixels that a 108pixel of density per inch pixels are 1/109" x "1/109 he be 11 881 px per square inch.

  Your laptop 15.6 screen displays 3200 x 1800 pixels that a 235pixels of density per inch pixels are 1/235 "x" 1/235 there are 55 225 px per square inch.

  So the same thing of pixels displayed on you 27 "display. Will posted on your 13.6 "appears in and region 1/5 the size that they appear in you 27" screen.

  The resolution is the Pixel density DPI pixel size.   Pixels have no size until there is a resolution involved.  Display are executed at a DPI of resolution they do not image the resolution defined in the image file.  They display only one pixel in size usually their size native pixel.  So the pixels in an image are displayed at the display DPI resolution and will not be the same size on all screens.

• Page of Yahoo mail that says 'there a screen resolution problem". A in case of problems with all stakeholders, even all the browsers. The question is Firefox!

  I have the latest version of Yahoo mail. When I click on the link "mail" of my Yahoo homepage, he directs me to a page that reads, "There is a problem of screen resolution". In the body of this page, it explains how to fix the problem. BUT, I don't have a problem with the resolution - the screen resolution should be 1024 x 600 or greater and IT IS! This only happens with YOUR browser. I have Chrome and IE, neither of which is a problem. I worked with a representative of the yahoo mail support and he explains that it IS a problem with Firefox and for raise you awareness and fix the problem - I use a Vista operating system on a computer and Windows 7 on my other computer, which has the same problem, so we KNOW for sure, it's a Firefox issue.

  I don't think that the effects of this question all those who use Firefox because I'm able to visit Yahoo Mail without any problems. I would say that to reset the zoom of the page on the page, this issue occurs on. You can do these steps go to view > Zoom > reset or press (Ctrl + 0 (zero).

• Monitor/screen resolution problem

  Hi, my work PC runs Windows XP Embedded.

  It has a Fujitsu LL3200T LCD monitor connected to a graphics SiS Mirage 741 adapter 20 ".
  When I change the resolution under properties of the view to something higher to 1024 x 786 screen resolution changes, but not the resolution of the monitor, that is the monitor still displays at 1024 x 786 and displays a portion of any resolution, I changed it to.
  I checked and the monitor is able to display up to 1600 x 900.
  I uninstalled and reinstalled the latest drivers for the monitor and the graphics card but the problem persists.
  Any Suggestions?

  Hi Kerushan,

  This problem would be better suited in the MSDN forums.

  Please visit the link below to find a community that will provide the support you want.

  http://social.msdn.Microsoft.com/forums/en-us/home

  Thank you.

• LabVIEW screen resolution problem

  Hey all,.

  I'll have a serious screen resolution or something another problem... whenever I open anyones VI it seems to make every piece of larger text (like text offers grouped by name, for example) where he did all my co-workers screws appear as they are crushed together where, as they open it on ANY of their laptops It seems. I tried to copy the file LabVIEW.ini one of their machines to mine but it stil does not solve my problem.

  It's almost unbearable, while we develop applications of large scale with many things happening in the comic book and the FP...

  Someone knows a way I can fix it, it seems to be only in LabVIEW, open Web pages, TestStand opens fine, etc..

  Search the forums for messages on the Windows fonts.

  Any chance that you are using a different operating system that they are?  Is it possible, that you have something integrated windows font size higher as 125% and they put it to normal?

• screen resolution problems

  I am running XP Professional service pack 2. Recently, when I go to web sites, I get a message "warning - your screen resolution has not the standard configuration of 1024 x 768 pixels. Some elements of dialogue isn't visible. "When I go into control panel my PC is set to 1024 x 768. It's more annoying, but it's getting more and more worse. Any help would be appreciated.

  Hello
  You can check this link:
  Resources for troubleshooting problems in Windows XP
  http://support.Microsoft.com/kb/307960
  You can also check with the support of the Web site.

• Screen resolution problem - is the bare min and there are no other options

  I've upgraded to Vista, a month or two ago and my screen resolution is the bare min and there are no other options better resolution. I tried to update the graphics card but it tells me that it is up-to-date.

  Update your video driver... try the following...

  If you have a portable computer... go to the support site for your computer manufacturer
  and the search for Compatible Vista video drivers updated.

  If you have a desktop computer... go to the website of your video adapter support
  manufacturer and find Compatible Vista video drivers updated.

  The following article can help you find the brand/model/driver version of
  your video card:

  Update Windows Vista graphics driver
  http://www.CGL.UCSF.edu/chimera/graphics/updatevista.html

  If you find a video updated driver... it would be a good idea to create a
  System restore point before you install it. Also be sure to follow all
  installation instructions that may be available on the download site.

  How to create a system restore point in Windows Vista
  http://www.Winhelponline.com/articles/139/1/