Windows 7 not stopped, why? With Vista and XP had no problem.
Windows 7 not stopped, why? With Vista and XP had no problem.
What can I do for her?
Since I have Win7 on my pc does not more fully. All fans are
turned on and the only way to stop it and hold the button for more information
4 seconds.
Can you help me?
Thank you very much!
Help!
motherboard:Asus M2N - MX SE Plus (2 PCI, 1 PCI-E x 16, 2 DDR2 DIMM, Audio, Video, LAN)
Life will be better
I tried all the options, they are not working until I have to get into the BIOS and change the option to "Enable" APIC, save and reboot...
My good computer shutdown!
Please try to change the BIOS APIC option and find out for yourself on your computer!
Tags: Windows
Similar Questions
-
Macromedia projector has stopped working, get this message when I try to play or install bigfish games. never had a problem, the recent past is only.
my pc is vista ultimate
tried several solutions, none works, very upset and frustratedHi scooby65,
Thank you for using the Microsoft Answers forums.
a. do you receive any error messages?
b. did you change to your computer recently?
Try to temporarily disable all security software and check if it helps.For more information, visit the links below:
http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
Also perform the following steps.
Try these steps and check if this helped:
1 left-click on start
2 - right click on computer
3. left-click on properties
4 - left click on advanced system settings
5 - running, click settings
6. left click on the parameters of Performance data
7 - click TURN DEP FOR ESSENTIAL WINDOWS PROGRAMS AND SETTINGS ONLY.
8. click on apply and then OK.
Alternatively, you can try to install in clean boot mode and check if that helps.
Steps to start in clean boot mode:1. click on start, type msconfig in the search box and press ENTER.
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.http://support.microsoft.com/kb/331796 . In addition, see the section on how to restore your computer to a Normal startup mode.
Alternatively, you can try to uninstall and reinstall adobe flash player and check.
For more information, visit the links below:
http://kb2.Adobe.com/CPS/141/tn_14157.html
http://kb2.Adobe.com/CPS/191/tn_19166.html
Hope this information is useful.
Let me know if it worked.
Thank you, and in what concerns:
Umesh P - Microsoft Support -
He used to work under Vista, not working (not able to turn it on) wireless adapater. But when Win7 starts upward, it turns on and turns off immediately.
Hello
First of all, make sure you use the latest version of QLB. If not, install from below:
Buttons lunch fast HP here (ver. 6.50.7.1)One important thing to keep in mind. Before update no matter what driver, make sure that your first uninstalled old version.
Try installing this driver and check it works:
Atheros Wirelesss driver for Win7 from HP here (ver. 8.0.0.172)When this driver does not solve your problem, try an exits:
Atheros Wireless here (ver. 8.0.0.225)
If even this will not work so tell me one thing. You have all colorors of stgrange the button mute or wireless.
If you want to say thanks to someone just click on Vote as useful (i.e. under each avatar of the user).
If your issue is resolved, please indicate then your wire is with solution.
-
Can not stop disappearing with vista disk space
This is beyond disgusting. I have my internet is turned off. I removed over 200G of things from my laptop because of low disk space error messages. There is NO set of restore points, but I have a hard drive Go 451 10,2 MB of free space. What is eating the part _ of the system disk space vistas. There is no virus, I used ccleaner, malwarebytes, windows Defender. NOTHING! and still my disk space disappears. Vista is a piece of *.
Hello
see if this program helps you to determine what is take up space
http://www.Jam-software.com/treesize_personal/
are you sure that the message is not for the recovery disk?
-
Windows Movie Maker Version sold with Vista and 2.6
I'm trying to import and create my own video from a disc that I got from my son's football coach. It seems that the video format is *.vob or another type of file that is not supported by Windows Video Maker. Is it possible to get the videographer can read this type of file or change the file type to be. WMV or something WVM supports?
I'm trying to import and create my own video from a disc that I got from my son's football coach. It seems that the video format is *.vob or another type of file that is not supported by Windows Video Maker. Is it possible to get the videographer can read this type of file or change the file type to be. WMV or something WVM supports?
=========================================
VOB are the video files to a DVD-video... (they have all of them).First... I suggest you copy the VOB files to a folder on your
hard drive. (If you cannot copy the VOB files... successfully the)
DVD may have copy protection)If you are under Vista Home Premium or Ultimate... try to import
VOB in Movie Maker files because they are... If this does not work... rename
they .mpg and try again...If it still fails, you will need to convert the files to WMV format.
There are many converters available on the net... the following
Freeware is just an example:(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)Format Factory
http://www.pcfreetime.com/
(the file you want to download is: > FFSetup250.zip
(FWIW... installation..., you might want to
Uncheck all of the boxes on the last screen)First... after the download and installation of Format
Factory... you can open the program and
left click on the toolbar, the "Option" button and
"Select an output folder to" / apply / OK.
(this is where you find your files after they)
are converted)Drag and drop your VOB files on the main screen...
Select "all to WMV" / OK...
Click on... Beginning... in the toolbar...
That should do it...
More information:
DVD Movie Maker 6... in Vista Home Basic
http://www.Papajohn.org/newsletters/185-DVDtoMM6inVistaHomeBasic.htmlVolunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
Have Windows 7 running on Parallels Desktop with a Mac. Get "setup.exe is not a valid Win32 application" when trying to download a program with Windows Explorer. I can download from these sites with Vista and XP with other computers. Now, I can't download the programs that are supposed to solve the problem! including FoxFire
Try to download from this site:
- Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html
-
Is ms flight sim 2002 compatible with Vista and if is not a patch? __
Is ms flight sim 2002 compatible with Vista and if is not a patch?
Hi zots,
That you get error messages when you try to install or to play Microsoft Flight Simulator?
You can run the game in Windows XP SP2 compatibility mode. For more details follow this link: http://windows.microsoft.com/en-us/windows-vista/Make-older-programs-run-in-this-version-of-Windows
Additional information you can visit this link Microsoft Games Forums: http://www.microsoft.com/games/en-US/Community/Pages/forums.aspx
Kind regards
Bharath
Microsoft technical support
-
I bought a laptop with vista and I was told I have to upgrade to windows 7 free. How do I do that?
http://www.Microsoft.com/Windows/buy/offers/upgrade-option.aspx
Above Microsoft link has info for the Windows 7 upgrade Options from the various participating computer manufacturers.
Read the info here to see if you qualify.http://www.Microsoft.com/Windows/buy/offers/upgrade-FAQ-option.aspx
FAQ about the upgrade is at the link above.
http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx
Railways upgrade to Windows 7 at the link above.
For any other question of Windows 7:
http://social.answers.Microsoft.com/forums/en-us/category/Windows7
Link above is Windows 7 forum for questions on windows 7.
Windows 7 questions should be directed to the it.
You are in the Vista Forums.
See you soon.
Mick Murphy - Microsoft partner
-
I have the laptop Latitude 630 with Vista and want to upgrade to Windows 7. This laptop will be able to upgrade to Windows 7?
original title: to upgradeHello
Read this information before you buy Windows 7:
"Windows 7 Upgrade Advisor.
http://www.Microsoft.com/download/en/details.aspx?ID=20
"Windows 7 system requirements"
http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements
And here is the site of Dell to see if Dell has Windows 7 drivers available for your model
http://www.Dell.com/support/drivers/us/en/19/DriversHome/NeedProductSelection
See you soon.
-
Windows has not stopped successfully
My computer 'blue screens' in fact black, with the message "windows have not stopped successfully" and the choice of starting in safe mode, normal, etc.. How can I fix it.
Hello
1. did you of recent changes to the computer before the show?
2. do you get any specific error code then the closure of your PC?
Follow the steps mentioned below:
Method 1:
Step 1:
Safe mode, start Windows in a limited State, where only the essential is started. If a problem does reappear when you start in safe mode, you can eliminate the default settings and basic device drivers and services as causes possible
Start your computer in safe mode with networking
http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode
Step 2:
If the question does not exist in safe mode, and then start the clean boot computer to determine if a third-party program is causing the problem. To configure your computer to clean boot see the following link.
http://support.Microsoft.com/kb/929135
Note: When you are finished troubleshooting, follow step 7 in the article to start on normal startup.
Method 2:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 3:
Check a drive for errors
http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors
Important: when running check for disk errors on the hard drive if bad sectors are found on the hard drive, disk errors check will try to repair sectors and all available on which data may be lost
-
Windows is not stopped correctly
I have a Windows XP and one day I started it up, and he says
"Windows don't is not stopped correctly, please choose an option below.I thought, what must have been a power surge, it's happened before, so I just hit start Windows normally. He began to start and then a screen like the one before that "Windows is not stopped... '. "I tried other options, but it's just a continuous loop. How should I do?What is your system brand and model?
What is your Version of XP and the Service Pack?
Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..
The question was preceded by a loss of power, aborted reboot or abnormal termination? (this includes the plug pulling, buttons power, remove the battery, etc.)
The afflicted system has a CD/DVD drive work?
You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?
If your system uses to work properly, what do you think might have happened to her since the last time, that it did not work properly?
If there is a problem starting, XP is configured to automatically try to start again and you can stuck in a loop not being able to go beyond the screen boot options, or none of these startup options you choose will work only.
Sometimes, when XP has a problem starting or falls down and tries to start again, it will give you a "short" menu of boot options and none of them will appear to be good to get your system going again. You have tried them all!
The options are similar to the Advanced Boot Options menu XP, but the only option that you need (disable automatic error system reboot) are not offered, because XP went too far during the boot process and offers a limited number of boot options.
If this is the case, you must call Options menu advanced boot yourself until you do not see the option:
Disable the automatic restart in the event of system failure
When you get the XP Advanced Options correct start menu you want to see, he has options on it like these:
Safe mode
Safe mode with networking
Safe mode with command promptEnable Boot logging
Enable VGA mode
Last good Configuration known (your most recent settings that worked)
Directory Services Restore Mode (Windows domain controllers only)
Debug mode
Disable the automatic restart in the event of system failureStart Windows normally
Reset
Return to OS Choices MenuYou need to choose in this menu is the option:
Disable the automatic restart in the event of system failure
Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.
If you miss the window of opportunity F8, you must try again and start tapping the F8 key with more urgency (earlier and more frequently) until you see disable automatic restart on system failure, and then select.
You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.
If your system has a Blue Screen of Death (BSOD), we need to know what the screen says:
Here's a BSOD example showing information you provide:
http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg
Send for the nose and the Red arrows (3 to 4 lines total).
Send all * line STOP message since there are clues in the 4 parameters.
If it looks like there is some kind of name listed in the STOP message file, send this line also.
Ignore the boring text unless it seems important to you. We know what a BSOD looks like, we need to know what your BSOD looks like.
Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.
-
is there a problem with vista and microsoft wifi?
last week, I was on the internet with my router (belkin) wireless and all the sudden it stopped working. Only works in the same room. A computer in the shop and the tech claims that it was a matter of microsoft with vista and wifi. Is this true? She said I could either adjust the settings of the router with manfactur of the router or the upgrade to windows 7!
Hello
1. did you of recent changes on the computer?
You can try to reset TCP/IP and Winsock.
a. Click Start and type cmd in the start search box.
b. in the list programs, right-click on cmd and select run as administrator.
c. type netsh winsock reset at the command prompt and press the Enter key.
d. do the same process to refresh the TCP/IP just replace the command typed with
netsh interface ipv4 reset press enter
netsh interface ipv6 reset press enter
ipconfig/flushdns, press enter
e. restart your computer.
How to reset the Protocol Internet (TCP/IP)
You can also check the following items and see if it helps:
In the Windows wireless network connection problems
Solve problems, find wireless networks
Hope this information is useful.
-
Windows is not stopped successfully when I open my laptop
I have an Acer laptop, Aspire, and for a while, he had a problem of a BSOD with an USB error because one of the USB ports broke some time ago and I'm too lazy or bad for repair. It happened maybe once a week, sometimes while the laptop was in hibernation (private). When it restarted, it gave me the stock screen "windows do not stop successfully, choose a safe mode or start normally. However, recently, it seems that whenever I open my laptop, it generates this error. I don't know what is the cause. I can't reproduce the error by putting the laptop into hibernation, only by closing it. I'm almost certain this isn't a hardware problem, as briefly close and reopen before she sleeps do not throw the error, so something is not get twisted when I close.
Any ideas?
UH... Even if logged on as administrator, it throws the error "Access denied" when I try to interact with this administrative events somehow.
I run windows 7. Can't stand the feeling of 'mobile' on a laptop, so this isn't the issue. I'm comfortable editing the registry, I did so successfully before, but I guess this is not a fix for 7 is it?
EDIT: found the problem... After all it's hardware. The switch of the screen somehow had moved while he was sitting on the motherboard, when he gives the signal of hibernation, he bypassed the machine inadvertently. Sorry to bother, you and thank you for the quick response.
-
Compatibility problem with Vista and iTunes
I downloaded iTunes 9 on my Tobisha laptop Satellite last night and put about 2.5 GB of music on it. I didn't upload the music from the internet. I used MP3s, I had for a few years.
When I went to boot up the laptop this morning the loading process took some time, but it never loaded to the login screen. I just see the bottom of MicroSoft. Is there a compatibility problem with Vista and iTunes? Maybe I put too much music on my laptop?
Boot in safe mode and delete iTunes and all the music I downloaded would solve the problem? Or it is less simple than that?
Don't know where to direct this question if any help you could provide would be greatly appreciated.
Thank you.
Hello
iTunes is compatible with Vista and there should not be any problem.
Yesterday, I installed iTunes 9 on my U400 and everything happened correctly.
If your laptop can not boot Vista correctly, then you should try the repair feature.Turn on the computer and press F8. Now you will see the advanced boot menu.
Now, you have many choices.As a first step, you should try the option called: last good known Configuration (Advanced)
If this will not help and the Vista will not start then try the option called repair your computer. This option displays a list of system recovery tools, you can use to repair startup problems, run diagnostics, or restore your system.
If that does not help, then you will need to retrieve the unit using the Toshiba recovery disc or HARD drive recovery.
-
Satellite Pro M70: The game performance with Vista and Intel 915GM graphics card
I have a satellite Pro M70 1.73Ghz with 768 MB of RAM.
Although many would condemn the 915GM chipset (with graphic GMA900) as garbage, I was surprised to find on XP it can run quite a few games like Need for Speed Underground 2.
I've heard some bad comments on the chipset with vista, and I was wondering if there is anyone out there who knows if I'll get the same kind of performance 3D with vista or not.Hey guys
You have a Mobile Intel 915GM 8MB - 128 MB shared memory graphics memory. What do you expect?
Check on the Microsoft website, the terms of Vista!It s not a graphics card performance and the games will not work with fast performance under XP and not Vista OS.
Expect too buddy!
Maybe you are looking for
-
The CD/DVD does not work with El Capitan 10.11.5 on Macbook Pro
Hello everyone, I spent the time to research on the here and the other site on why the CD/DVD does not work with El Capitan 10.11.5 on MacBook Pro mid 2009. This discussion forum has said that he will not work with the El Capitan software. Any idea o
-
I have a pc running Windows 7 64 bit. I have the latest Firefox V 10.0.1, automatically updated several days ago. Everything was fine until about an hour before, when I launched Firefox and all the Favicons for my favorites are blank dotted squares.
-
Hi, SPANKING NEW GUY BRAND here, with what is probably a Newb question entirely: Formula: LabView and TestStand 2014 In Labview, I have a VI that extracts data from an XML file, the Treaty and spits out another XML file The result is: Name gross Scor
-
Hello!! All the I have an NI PXI-8464 and I convey the message to high speed in CAN 0 and I connect the wire in the DB9 pin 7 CAN_H and CAN_L 2 Pin port, but I want message in 1 CAN in single wire, but the configuration of the port is even similar CA
-
An Application incompatible mobile partners and detected but does not always
Acknowledge troubleshooting see the report are fix the incompatible program-Mobile Partner (broadband pilot-Huawei E1552) but still does not resolve the application respective icon still showed her suffer from inconsistent failure. Please help. TQVM