Windows 7 - Office updates fail after reboot

Similar Questions

• 3 MS Windows & Security Office updates fail continuously as well as Acrobat & Apple QuickTime - arrrgh!

  These updates (KB978380, KB978382 & KB979895) repeatedly failed to install after being downloaded automatically. I have also manually download these updates from the MS site, stored in the computer and tried to install without success. I have to disable the Windows Firewall and the McAfee? Please note that downloaded from the Acrobat Reader from Adobe and Apple QuickTime updates failed to install.

  Coincidentally, I just discovered whild in the Admin account that Word now does not save my docs - wonder if I should restore to an earlier point?

  Why does this continue to happen (as it has in the past)? ! I don't have a lot of computer savvy, but after reading the comments of others, I am very frustrated and confused with MS Vista.

  craigcycle,
  I think that you run some aggressive scans on your system for infections malware\virus.  The fact that you get into any trouble with the Windows updates as well as 3 updates (Apple and Adobe) party leads us to a problem that is more then just a Windows Update issue.  You do not mention 2 firewall running.  You must disable one of them, because the firewall programs may conflict with each other and cause problems.  Here are some links with useful information about the protection malware\virus.
  Get rid of malware

  Can I clean an already infected computer?

  Windows Live OneCare Safety Scanner Windows 7\Vista

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista & Office updates fail... Site Update says I have XP... but I'm running Vista

  Hello. I've been running Vista SP2 on this computer since last January. Received fine updates. I had also installed MS Office student edition and allows to get updates. Recently, I have Office 2007 Enterprise edition and I installed it (for outlook & editor). Since then, I was not able to get the security updates. My computer will display I have 17 updates, but they fail to install. I went to the site of a genuine advantage validation and validated Vista & Office.

  However, when I get the error code and go to proposed sites such as this http://support.microsoft.com/default.aspx/kb/933528... I get an error message

  This article applies to a different version of Windows than the one you are using. Content of this article is not relevant to you.
  Visit the Windows XP solution Center

  Why is this happening? Why Microsoft update thinks I have XP? How can I solve this?

  Thanks for your help.

  Shankar

  I followed the methid described elsewhere... Turned off the coast of control user account and updates have been installed correctly... I turned it on...

  I am an administrator on this computer. Why did I have to do this? This will be the case from this point on? Thank you! Shankar

• Windows xp update fails after reinstall OE discs error number: 0x8024400A

  Windows xp update fails after reinstall OE discs error number: 0x8024400A. Cannont even run Windows update at all.

  Hello
   
  To work on the issue, consult these links.
   

  Temporary connection related errors may occur when you use Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/836941
   
  Note: make sure that you enable the antivirus software, other security and firewall after the test programs.
   
  Caution:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  You can also designate a similar thread that addresses the question:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/how-can-i-get-Windows-Update-error-x8024400a/35ba7694-c9b2-4043-a4c0-777d4b7736dc

  Hope the information is useful.

• Bootcamp update fails after El capitan (please help me alone!)

  Hello

  I think I have the same problem postedBootcamp update fails after Yosemite (please help me alone!)

  But like the other user, I'm a little scared, and I don't want to lose my Bootcamp partition.

  That's why I ask you to help for solitaire (thank you much in advance).

  I upgraded my MacBook Pro 13 "(mi-2010) at El Capitan 10.11.5."

  Then I noticed that I could not find Bootcamp.

  Regarding the other question, the score was still there, but now under the name "disk0s4".

  I used Testdisk, following the advice, and I discovered the missing partion and data (I could make a copy)

  Now, I would be sure to make the right steps to retrieve the situation.

  Here is the output of Testdisk

  

  

  The partition does highlight is the right one, here's where I found my data.

  

  Now, what I'm supposed to do is follow the same steps that I read in the old post with 508484288 to step 7 and + 468284272 in step 8, in this way:

  GPT4 to rebuild using start/end offsets

  1. Sudo gdisk/dev/rdisk0
  2. P (print the complete list of parts)
  3. D (delete)
  4. 4 (part 4)
  5. N (new part)
  6. 4 (part 4)
  7. 508484288 (-start offset in the sectors or the starting point for the Bootcamp part)
  8. + 468284272 (-size offset, rather than the end offset)
  9. 0700 (part of Windows type)
  10. P (list of all parties just to see what changes will be)
  11. W (Write the new GPT)
  12. Y (Yes! really write the new GPT)

  And then I need to rebuild the MBR (as the old post)

  1. Sudo gdisk/dev/rdisk0
  2. P (print from parts list)
  3. R (Recover)
  4. O (current MBR hybrid in block letters)
  5. H (chooses hybrid)
  6. Partitioning numbers be hybridized: 2 3 4
  7. Y (good for the GRUB question)
  8. (Indicator boot part 2) N
  9. N (part 3-flag of boot)
  10. Y (boot indicator part 4 make the bootable NTFS partition)
  11. O (current MBR hybrid in block letters)
  12. W (Write new MBR)
  13. Y (yes! write the new MBR)
  14. Reset

  I'm sure I'm in the right direction, but...

  Many thanks for any help

  Excellent work. The two sets of Gdisk steps are correct. If you are on El Capitan, these two sets of measures Gdisk will fail because of the Protection of the integrity of system being activated. Please disable SIP.

  1. boot in local restoration (command-R).

  2. start utility-> Terminal.

  3. type csrutil disable in the Terminal, and then press enter/return.

  4. type csrutil State.

  5 start normally, then type csrutil status to confirm that all of the individual entries are still disabled.

• Windows XP & Office update error - error number: 0x800A0046

  Windows XP & Office Update error

  When I try to update, I get the following error.

  [Error number: 0x800A0046]
  Please change your Internet Explorer security settings
  To save the changes made to the settings of this Web site, you must enable the for Internet Explorer userdata persistence. Follow the steps below, then click on change settings on the left and try to save your changes again.
  1. in Internet Explorer, click the Tools menu, Internet Options.
  2. click on the Security tab, click the Internet security zone icon, and then click Custom level.
  3. in the settings dialog box, scroll down to the Miscellaneous section.
  4. persistence of Userdata, select Enable.
  5. click on OK and when the security warning dialog box appears, click Yes.
  Learn more about the measures to take to solve this problem (0x800A0046 error number) yourself.

  I tried all the suggestions of Microsoft and others as follows:
  http://support.Microsoft.com/kb/836941
  Verification of Conficker
  http://www.Microsoft.com/security/PC...Conficker.aspx
  security/scan
  http://www.Microsoft.com/security/SC...s/default.aspx
  Avast ran
  Ran SUPERAntiSpyware
  Malwarebytes' Anti-Malware ran

  Hi Skos1,

  Try resetting IE, follow these steps: http://support.microsoft.com/kb/923737

• Windows xp kb2718704 update fails to install with error code 0 x 8007005

  Windows XP KB2718704 update fails (approx. 5 + times) and gives the error code 8007005 0 x. Update is so important? Why is it a failure? Have used MSFixit, unresolved problem. I'm puzzled that MS is not problem. What is the SOLUTION to this problem.

  Arya-
  Thank you for your response. I didn't have the ability to use your suggestions. MS auto updates had popped up when I stopped, and finally, the update did the trick.
  Thank you

• Ping IP of ESXi host fails after reboot? Newbie

  VMWare ESXi 4.0.0 ReleaseBuild 171294 - HP ProLiant DL360 G4

  The server turned craps so we got a used that even make and model and shared disks.  Now we cannot connect with the customer and we cannot ping, ping times out.  When we ping from the console we get inconsistent results, can ping ok, the first IP addy and then fails on the second ping, or it connects to the second IP addy, but fails to ping first that it resolve the hostname constantly.  We stopped and started the management network and Management Agents a couple of times but no joy.

  I have the Articles KB 1008446 ping to the ESXi host IP fails after reboot, 1003490 restart the Management Agents on an ESX or ESXi Server and 1003677 Tech Support Mode of emergency support.

  What must we do to recover the server to an operational state? If there is other information needed to help us please let me know.

  And, what distro and version is ESXi 4.0.0 inspires?  I read that it is Redhat, but I couldn't find the version.

  I have worked with Soloris, Linux and Aix over the years, so I am comfortable working from the cmd line if need be.

  Thank you

  ESXi is not Linux. The VMkernel is VMware. The small console that runs the VMkernel is busybox. ESX has a VM management based on RedHat 5, but here again the VMkernel is all VMware.

  I would check that the embedded NICs are working properly. Start with a linux rescue disk and test.

  If all extracted would reset the system configuration from the yellow Console screen. Your configuration will be lost, but your machines virtual etc. will be OK. You will need to add to the inventory.

• Satellite 2410: Updates of Windows XP problem - it hangs after reboot

  Hello! I am a computer engineer and I never face a problem like this before.

  I install a new HD to the model 2410-601, after the installation of the restore CD and the conversion to NTFS I installed SP2. Now... after the computer start some automatic updates and ask for a reboot. When it restarts the computer will not fully start and stop at Midway to the windows xp logo... I checked updates of drivers of toshiba for a bios update. And the latest version was a 2002 V1.40. 2002 the last of them? in 4 years toshiba took the trouble to update a bios version?

  I even changed the RAM, because I though that might be the problem.
  I update SP2 from windows update and still does not. I formatted the machine 5 times already.

  Can anyone help?

  P. S.
  Excuse my English

  Hello

  Above all the BIOS update has nothing to do with a Microsoft SP2.
  You should know as a computer engineer.
  My laptop is about 6 years old and I've never updated a BIOS. It works well with all Microsoft OS.

  However; did you check Microsoft Windows XP SP2 update information?
  On the Toshiba driver download page, you will find this document or use this link:
  http://support.toshiba-tro.de/Tools/updates/Windows-XP-SP2/mwxpsp2ui-XP-11.zip

• Error code 646 for Windows Microsoft Office Update.

  I have Microsoft Office 2007, and for weeks now Windows Update is not able to update the necessary updates. Error code 646 appears after updates fail, but all of the other Windows updates work very well but these Microsoft Office simply don't work and it happened for weeks. I searched for answers, but all lead to dead ends. Help!

  BROWNEY,

  Gives it a try and see if it solves the problem....

  http://support.Microsoft.com/kb/2258121>

  Let us know if this helped

• Office updates fail. Error code 80070643

  Hi, I had a reo-ccurence of an old problem. Windows Update fails on the Office security updates. Error code 80070643.

  The modules that are 921598, 943973, 945185, 975051, 974554, 953404, 951535, 972580, 947319. Other modues installation ok.

  I tried to uninstall Office 2003 and reinstall. I tried checking DARE. EXE as suggested. PatchREgCleanup x 64 (for my Windows 7, 64-bit) will fail with a message saying "a product mus be determined." I tried Disabaliung and restart Windows Installer in the management of the computer.

  Whate otherwise I can do? Thank you.

  
  

  Thank you.

  The problem is now resolved. The flaw lies in the installation of FrontPage 2003. Security updates are installing.
  For the benefit of third parties who may read this page, I add the following observations: -.
  After the failure of an update there was little indication of the origin of the problem.
  However it happened to me that reliability monitor has given more information, for example
  "Windows Installer reconfigured the product. Product name: Microsoft Office FrontPage 2003. Product version: 11.0.8173.0. Product language: 1033. Manufacturer: Microsoft Corporation. Status of success or error of reconfiguration: 1603. »
  Then, I realized that all re - install the suite Office 2003 does not automatically re - installed FrontPage.
  It seems that when looking for this kind of problems, a check of the history of reliability could be useful to determine just where the problems come from.
  Thank you.

• Windows 7 insstallation updates fail. Error code 80070643

  Hello. My new laptop has just 8 days with Windows 7 Premium. Now, updates fail with the error code 80070643.
  Service packs: Office 2003 SP3. KB907417. KB975958.
  Until yesterday, updates have been working well and I have sucessfully made many updates when I first got 29. Nov.
  I have re-installed C: drive from a backup created on 2 December when updates have been successful, but still do not work.
  How can I get going again?
  Really need help.
  Thank you. Stoker Wilson.

  Thank you. I uninstalled Office 2003, then began to re - install the modules one by one, from Outlook. Update was necessary after that one facility and took place normally.  Do not know why. I will keep your information in case the problem comes up again. Thank you.

• Bug in Vista without response: the icons of the Office Keep disappear after reboot - have to manually make it visible each time that

  Vista!

  Bug again issue: Vista Desktop Icons keep disappearing in the course and more !

  Out of nowhere, my desktop icons disappear after reboot. When I reboot, they appear for about a second and then they are gone .

  I have to manually select the view desktop items box every time after a reboot . I tried a clean reboot but nothing. By coincidence, the sidebar keep appearing EVERY TIME that I reboot my unchecking it displayed when it restarts.

  Y at - it a fix for this bug that continues to make my office disappear and make me manually make them visible?

  Help!

  Hi ad391970,

   

  The reason for updates make changes on the computer would be some conflicting third-party programs or there might be a corruption in the Windows Update components.

  I suggest that you try to install updates by disabling the third-party program conflict and check if it works.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Perform the check and the clean boot if you have the problem.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  If the problem is resolved to check what is the cause of the problem, referring to the link given below:

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  Click Start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  On the general tab, click the Normal startup option, and then click OK.

  When you are prompted to restart the computer, click on restart.

  If the step above does not resolve the issue updates suggest that you try to reset the component of windows update and check if it works.

  Check out the link below to find out how to reset the windows component update

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  If the step above does not resolve the question suggests that you check in a new user account if you are faced with a similar question. If a face similar to a new user account which means your other user account has been corrupted.

  See the link below for screw a corrupt user profile.

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Hope this information is useful.

  All the best!

  Thanks and greetings

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Updates failed after the new HD install

  I live in South Africa and use a MacBook Pro bought in the USA by the end of 2014. When I had to replace the HD in December 2015 the company is certified local Apple had to order the HD of the USA. After installing it, they restored my software and data files and mails in Mail.

  Since the replacement of HD that I was not able to install updates because after that I give permission to update, I get a notice that no update is available under "this Apple ID" or something to that effect. After 8 months of updates failed my HD is slow again with my computer freezing temporarily and the color wheel - wait please turn from time to time. What should I do to allow updates succeed?

  It seems that an another Apple ID that yours has been used when the HD has been replaced.

  -Backup your data on an external drive

  -Start the recovery of the Internet

  On OS X Recovery - Apple Support

  by pressing Command + Option + R at the start of the OS X Internet Recovery*.

  If start you only on the recovery partition, you may have same problem

  then format the boot disk and install OSX. During the installation of recovery of the Internet, the version of Mac OS x installed is what came initially with the Mac. For example, you may need to update/upgrade via the Mac App Store

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• CODE ERROR 646, of security Microsoft Office updates fail to install

  Run the SP2, Vista Home Premium, 64 bit, w/Norton Internet Security 2010

  Ran Windows Update this morning (09/06/10) install fifteen 15 updatesand six 6 installation failed.

  Windows Update has installed: KB890830 KB980218, KB982381 KB979482, KB980195, KB905866, KB979559, KB982536 and KB979910.

  Windows Update has failed several times to install: KB979441 KB982158 KB982135 KB982312, KB982331, KB982308, all associated with MS Office.

  Had a similar problem on the 05/12/10 with another MS Office Update, KB976321. In this case, eventually made to the MS download site, then installed the update manually. Prefer not to go that way again.

  Thanks for any help.

  Hello

  Here are my recommended steps to resolve this problem:

  1 disable UAC. Down comes the restrictions - turn it off completely.
  2 restart your computer for the change to take effect.
  3 re - download the update of security for Microsoft Office System 2007 (KB982331) from the link below:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=7f89a734-cda4-4abb-9a10-f6dfe560e8d0&displaylang=en
  4. install. It should work fine.
  5. If it still does not work, try to open all or part of your MS Office applications.
  6. follow step 3.