Windows 7 PC hanging problem

My crashes PC windows 7 exactly after 40 seconds of connection. I had detected too hot on the hard drive. Could you help on this issue.

If the fans are all working properly, it is likely a failure of the thermal paste between the CPU and the heat sync.

The following assumes that you have to deal with your desktop format.  If you have a laptop, you will need a technician to do it.

Go to the computer store and you get a small tube of thermal paste.  You need to remove the synchronization of heat on top of the processor:

  1. Turn the power off and hold the switch on in during 7 seconds.
  2. Disconnect the fan cable from the motherboard.
  3. Unscrew the 4 screws that hold the synchronization of heat on the motherboard.
  4. VERY carefully remove the heat sync.
  5. Using a soft cloth (very small piece) and a very small amount of alcohol to friction, very carefully remove the dried paste the contact surfaces, dry them carefully
  6. Put 4 points of paste on the CPU, not on the edges, but not to the Center either.
  7. Press on the CPU heat sync. Pull it out and check the batter completely covers both surfaces but do not ooze or the other.
  8. Now raise.

Tags: Windows

Similar Questions

  • Windows 8 stop & Hang problem?

    I upgraded my new laptop from windows 7 to windows 8 the day its launch as I was part of the upgrade offer. Since its installation, the beings of system to freeze or it slows down ultra slow. Also when I stopped, it just says: stop but he doesn't even if I wait for half an hour. Please suggest what to do?

    Problems with perceived judgment as being the choice of the day. I thought I have mine healed with the fast start of stop mode. It worked once or twice and now using the power button to stop it.

  • When you delete files (in Windows 7) Explorer hangs on 'calculate' the size of the files to delete. This problem also occurs in Windows Vista (out and included SP1).

    When this problem happens:
    * You try to delete files, from any folder: a folder user protected (such as your desktop), a protected windows folder (such as program files) or an unprotected folder you created yourself (for example, a folder named "test" on your C permit)
    * The problem only occurs when you try to delete files using Windows Explorer. The problem only IS NOT OCCUR when you delete the files from another system using one hand (log on to another computer, open a shared folder, for example by opening \\windows7system\c$\test and try to remove this folder).

    What's happening:
    * Explorer crashes when 'Calculating' the features of folder.

    Question:
    * Why is this happening? It seems to be a problem in Explorer, not in the delete code actually (since the problem does not occur with one hand)

    I don't know the underlying cause or how to fix it. However, something like Unlocker would work.
    http://ccollomb.free.fr/Unlocker/

    Tom

  • Windows 7 blue screen problems

    Windows 7 blue screen problems is so frustrating. The blue screen of death or BSOD because it is often called. I need help...

    Hello

    Check this thread for more information using BlueScreenView, MyEventViewer and other methods
    to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

    http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/c675b7b8-795f-474d-a1c4-6b77b3fcd990

    We can analyze the minidumps if make you it available to the SkyDrive or another file
    sharing sites.

    ZIP or download the content of the C:\Windows\minidump

    Use SkyDrive to upload collected files
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    -------------------------------------------------------------------------

    Also this, so you can see the probable bluescreens.

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    (also Windows 7)
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    ===========================================================

    Check out these utilities to see if information may be collected:

    It is an excellent tool for displaying the blue screen error information

    -Free - BlueScreenView scans all your minidump files created during 'blue screen of death '.
    hangs and displays information about all accidents of a table.
    http://www.NirSoft.NET/utils/blue_screen_view.html

    -------------

    MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or
    so time of the BSOD for more information on the possible cause - see TIP.

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
    Set it for a bit before and after the time of the BSOD.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    ------------

    AppCrashView - free - a small utility for Windows Vista and Windows 7 which shows the
    Details of all application crashes occurred in your system. The information of the plant are extracted
    the .wer files created by the Windows Error Reporting (WER) of exploitation component
    system each time that an accident has occurred. AppCrashView also allows you to easily record the
    list of accidents to the text/html/csv/xml file.
    http://www.NirSoft.NET/utils/app_crash_view.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Transfer of files of Windows 7 upgrade hangs

    Vista upgrade to Windows 7 on a 64 bit system.  All goes well until all 72% on the transfer of files.  Then she hangs up and alternates between please wait and the number of files.  only 300 files remain, but it has been blocked for hours.

    See the following aid as appropriate. http://www.techcular.com/Windows-7-installation-hangs-at-62-72-during-Vista-upgrade/

    Microsoft "Fix It" download the utility for 62%: "
    http://go.Microsoft.com/?linkid=9693817

    62% patch for Vista upgrade:
    http://www.SevenForums.com/installation-setup/36351-Microsoft-fixes-62-upgrade-hang-issue.html

    Upgrade stops responding (hangs) at 62% when you upgrade to Windows 7
    http://support.Microsoft.com/kb/975253

    Windows 7 upgrade from Vista stuck at 63% (not the same problem as 62%)
    http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/thread/4ed7e497-6b79-4978-afb4-17d6b0a31e33

    J W Stuart: http://www.pagestart.com

  • Satellite L305D-S5892 - Windows has encountered a problem

    Hello

    I have an I have a Toshiba-L305D-S5892
    With Vista Home Prem 32

    I have a few problems and am currently blocked.

    Each problem below, is a problem that I met after taking a few steps.

    * The 1st problem *.

    A few hours ago my screen was frozen just after I tried to install this codec from microsoft, so the only option I had was to do a hard reset.
    When my computer back on, I received this message:

    Windows has encountered a problem communicating with a device connected to your computer.

    This error may be cause of disconnect a device removable storage such as an usb external drive while the appliance is in use or by defective as a hard disk hardware or the CD-ROM drive which is a failure. Make sure that all removable storage is properly connected, and then restart your computer.

    If you continue to receive this error message, contact the manufacturer of the equipment.

    File: \Windows\system32\winload.exe

    Status: 0xc00000e9

    Info: An unexpected I / 0 error has occurred.

    I didn't have any usb device or removable in media.
    I can only access my utility series at the beginning, which is this menu: hand-Advanced-display-security-Boot - out

    * 2nd problem *.

    I opened my laptop and released the CD / DVD + RW, he started upward and now I get this message:

    For Realtek RTL8101E/8102E PCI - E Ethernet Controller v1.07

    PXE - E61: Media test failure, check cable.

    PXE - M0F: Exit PXE ROM.

    No boot device - insert boot disk and press any key

    * 3rd problem *.

    I downloaded the NEOSMART repair Cd.

    Once I'm in the System Recovery Options, it tells me to select an operating system. However it has not traded. If I press drivers to load, then a message tells me to insert the media, and then select drivers. I almost 'ok', and then am taken to explore, when there are a few system files and files (all empty)?

    I'm confused... any help?

    Hello

    For me, it looks like a problem with the system eventually installed the HDD failures.
    Why?

    Due to the issue described in point 2.
    PXE - E61: Media test failure, check cable error is displayed because the phone didn t find the installed operating system and try to boot from LAN.
    This happens especially if the HARD drive was not recognized by the BIOS.

    My recommendation;
    Access the BIOS and check if the HARD drive is listed there.
    If this isn't the case, then you will need to replace the HARD drive and reinstall the operating system.

    If the HARD drive is listed in the BIOS, then take a recovery disk and try to reinstall the OS again.
    If you have no recovery disc, then you can order it here.
    (I guess it's a Toshiba laptop model we)
    https://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/serviceUnitVerification.jsp?orderType=SFF

    Good luck

  • Satellite A500 - 1C0 - Windows has detected a problem with HARD drive

    Nice day
    Laptop shows me that Windows has detected a problem with the HARD drive. The laptop is running slow and chops. And when you turn it, it shows me Smart failure predicted on hard disk 1. Toshiba MK-5055GSX - (S2). Can you help me? (I m, CZ)

    http://img684.imageshack.us/img684/8434/smartm.jpg

    Hi Konyga,

    If you already have a warning on the internal HARD disk before Windows starts I would recommend sharing it and backup all data as quickly as possible.

    Is your laptop still under warranty?
    If Yes, you can get a new HDD to an authorized service provider. It would be free because it s covered by the warranty. All you have to do is contact with an ASP.
    http://EU.computers.Toshiba-Europe.com > support & downloads > find an ASP.

  • Windows has encountered a problem with the DVD/CD on Qosmio G20

    has obtained a g20, problems with the cd player. When I go to copy or move music or pictures on my cd/dvd, I get a pop up saying windows has encountered a problem with this drive...
    can someone tell me what is happening.
    Thank you

    On this path, it is not easy to say anything. Try to remove the drive from Device Manager, and then restart the device. The unit should be recognized and installed correctly.

    If you want to create data CDs using windows options please check disc recording option. Check the properties of the drive and check option under the recording tab.

    Good bye

  • 10 Windows compatible printers: printer problems after the upgrade to Windows 10

    If you're wondering what HP printers are compatible with Windows 10, see this HP support doc: Windows 10 compatible printers.

    If you re having a problem with your HP printer after the upgrade of your Windows 10 PC, printer problems after upgrade to Windows 10 could solve your problem. He treats all kinds of questions such as:

    • Cannot print after upgrading
    • Cannot parse after upgrade
    • Printer software installation & screen opens instead of HP printer Assistant
    • "HP solutions Center can not run" or "Scan is busy or in use" error with a network connected printer
    • Multiple display of printer in the HP printer Assistant names
    • Can not scan or fax with HP Solution Center after that disabling HP programs to improve performance
    • "Access denied" error change HP Solution Center print settings
    • Cannot print with a pilot integrated Windows (Africa, Asia Pacific, Europe and Middle East only)
    • Fax device are not not in the devices and printers connected to a USB printer
    • HP Printer Wizard does not open with a USB connected printer
    • HP Smart printing does not open in Internet Explorer
    • "Error-2081883401' poster during the uninstall of the printer driver.

    In the compatibility Windows 10 doc, follow these steps to quickly locate your printer:

    Click and scroll down to the section for your printer, then hold down the CTRL and F keys. When appears in the search box, type the number of printer model to automatically find your printer. TIP: find the numberof the printer. For example, if you have a HP Officejet Pro 8600 Premium e-all-in-one printer, open the Officejet section and search for "8600" instead of "Officejet 8600.

  • I have install fallout 3 and the last update (1.7), but when starting a new game, he tell me that windows is having a problem reading it & then it locksup.

    original title: game Fallout 3 on Windows 7 problem

    I have install fallout 3 and the last update (1.7), but when starting a new game, he tell me that windows is having a problem reading it & then it locksup, I have a Toshiba Satellite, Fallout New Vegas works perfectly on my laptop, how can I play Fallout 3, is here to play Fallout 3 on windows 7.

    Hello

    You can see the link provided. It gives information that Fallout 3 is not compatible with Windows 7.

    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=fallout%203%20

    Windows 7 Compatibility Center: Fallout 3 http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=%20Fallout%203&OS=32-bit

    You may need to contact the manufacturer of game for support

  • Windows has encountered a problem and needs to close

    Windows has encountered a problem and must close is happening frequently. ; When I try to close it won't let me

    Hello

    Thanks for posting your question in the Microsoft Community Forums.
    It seems that you receive error message "windows has encountered a problem and needs to close" on the computer.

    Provide us the information to help you further.

    1. don't you make changes on the computer before the show?
    2. when exactly you receive the error message?

    Try these steps and check if you are able to solve the problem.
    Method 1:
    Step 1: Check if the problem occurs in safe mode:

    A description of the options to start in Windows XP Mode
    http://support.Microsoft.com/kb/315222
    Step 2: If the problem does not occur in safe mode then you can perform a clean boot and check that helps:

    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353

    Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.

    Method 2:

    You can scan System File Checker to fix corrupted files.

    Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
    http://support.Microsoft.com/kb/310747

    Reference:
    File system (CFS) Checker
    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

    If you are always faced with the question, please respond with more information, and we will be happy to help you

  • Explorer Windows has encountered a problem and needs to close, sorry for the inconvenience into account only one user. Other user accounts properly.

    This problem deals with only one of my user accounts, where the user accounts function correctly.  When my wife logs in to his user account, it receives the error "windows Explorer has encountered a problem and needs to close, sorry for the inconvenience."  No ICONS or deskbar charge upward; However, my daughter and my user account functions properly.

    I did a system successfully restore to a previous point, but the problem remains.

    If you are still having problems with Windows Explorer crashing, I suggest to consider the suggestion offered by ShadowKat:

    "Hello people, it seems that some guys out there are still having trouble with this random crashes. I have the same problem, except that it happens every time that I go to my media files on my NAS. It seems that there is a bug or something with windows that causes this problem when you access a folder to storage media like mine, especially when the size of the file is very large (archive all my discs of film there for convenience and continuous =), about 1 TB of data). Windows capable of generating thumbnail images for your files and blocks the Explorer as well.

    I solved this by going to my computer > click the "Organize" (upper-left) > folder and search options > view tab check "Show icons, never thumbnails" option and uncheck the "display file on the photos." This prevents windows to generate images and solved the problem for me. Less visually flashy Yes, but at least not need a cloth and restart is).
    I hope this helps and good luck!
    ShadowKat. »
     
    If you're still having problems after this, I suggest that to start a new thread in the following location:
     
     
    I hope this helps.
  • Windows has encountered a problem, try to copy a file... why?

    Windows has encountered a problem, try to copy a file... why?  MikeW

    There are many possible reasons.  What you have tried to do over time?  Is there additional information printed with this message?  A few possible reasons come to mind:

    • The file was opened exclusively by the operating system or another program
    • The full path to the file from the C:\... contain more than 256 characters
    • Permissions problem: you have read permissions for the file or permission in writing to the destination
    • The file entry or damaged directory disk sector. (Run the command chkdsk with the /R option to this address)
    • The file is larger than 4 GB and you try to copy it to a disk formatted with a FAT file system.

    I'm sure that there are more reasons, but need more information.

    HTH,
    JW

  • Whenever I do a right click on a file I get the error message that Windows Explorer has a problem and needs to close

    original title: problems of files

    Whenever I do a right click on a file I get the error message that Windows Explorer has a problem and needs to close.

    Sometimes, the problem is caused by a third-party extension. ShellExView can be useful to see what shell extensions have been introduced in the Explorer. Lire read on this topic, then scroll down to download the x 86 (32-bit) or x 64 (64 - bit) version here near http://www.nirsoft.net/utils/shexview.html

    When you run it, click the column of company for sequence entries in alphabetical order. Suppose Microsoft entries are in good faith and focus on others. Is something listed that is useless or unknown? If so, select it and click the Red (on top left) task to turn it off. You can find more easy to disable them all and then reactivate (green area) one at a time and Explorer of execution until the culprit is found.

  • When copying pictures on a CD, the error message "Windows has encountered a problem trying to copy this file.

    Try to copy photos on CD. I get the message "Windows has encountered a problem trying to copy this file", it comes on for each photo in the file until they are all updated. This method used to work well. Answers would be appreciated.

    You are in your folder my pictures?

    What happens if you do the following...

    Select (highlight) a group of miniature photos...

    Right-click the group selected...

    In the menu choose... Send to / DVD - RW drive...

    Transfer Photos to a CD - how to burn Images
    http://www.brighthub.com/multimedia/photography/articles/5126.aspx

    ===

    FWIW... the following freeware can be worth a try:

    CDBurnerXP
    http://www.CDBurnerXP.se/
    (works on XP / Vista / 7)

    Download CDBurnerXP
    http://CDBurnerXP.se/download.php

    CDBurnerXP - create data disc
    http://CDBurnerXP.se/help/data/compiledata

Maybe you are looking for