Windows 7 Pro 64-bit

Similar Questions

• Aurora running, but can not be played on Desktop Windows 7 pro 64-bit

  I've been using Aurora for several years with Windows 7 pro 64-bit with the two latest major 28/29 Auroa just missing from my desk after clicking on the icon on the desktop, I tried to uninstall, but the system told me I had still Aroura running uninstall so I had to reboot my PC, I could uninstall I then reinstalled Aurora and a pinned icon appeared in the taskbar, but when I clicked on the icon on the desktop the hourglass turned but no Aroura started on the desktop, so I went through the whole thing again and uninstalled Aurora and installed Firefox V26 and now it has progressed to the last version that has disappeared as exactly the same way.

  What can I do if I use Aroura again because it is very good and safe to use?

  I can't use the troubleshooting info as I can't see Aurora/Firefox to view or copy/paste the info shown.

  Pete

  Thank you solved the problem, I restarted the PC and now Aurora works again thanks.

• Unsupported personality: PCL on print Laserjet 1012 from Windows 7 Pro 64-bit

  I have an HP Laserjet 1012.  My PC has Windows 7 Pro 64 bit.  I used the Laserjet 1015 PCL 6 drivers.  When I printed the first two times, it worked fine.  Now each page just print "Unsupported personality: PCL ' at the top.

  What should I do now?

  Thank you for your ' Experts for a day Tech Support.

  Mark

  Hi rbarbo43,

  I found the following thread that will help you during the installation of the printer in Windows 7. Let me know if you need assistance?

  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/LaserJet-1012-driver-for-Windows-7/m-p/351356#M16114

• Maximum memory for Pavilion DV7t special edition running Windows 7 pro 64-bit with Intel i7 Q720

  I have an entertainment 2009 Dv7t Special Edition running on Windows 7 64 bit with intention processor i7 Q720 @1 .60GZ. I have 8 G of ram now but need to go to the top. Can I put two 8 G in the slots. Read some reviews say the software works and Windows 7 pro 64-bit can take up to 132 G RAM, if that was even possible. I run two internal drives. But with the addition of the cloud and running photoshop on cloud too much memory is used, slow down the computer. You want to go to 16. Everybody does and no problem?

  Thank you

  Hello

  As mentioned previously, there are SEVERAL dv7t editions and special editions. We have dv7t-3000, 4000-dv7t... and it is very difficult to find the right plug. Please use the following link to find the product/model number:

  http://support.HP.com/us-en/document/c00033108

  Your machine could be the following:

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us & dlc = in & lc = in & product = 5292645 &

  If so, the #4 on the following manual page it support 16 GB max:

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us & dlc = in & lc = in & product = 5292645 &

  You can have 2 x 8 GB, no choice. Only a few portable computers that have 4 slots and supports up to 32 GB. No way on this earth at this time, you can find a laptop that supports the 132 Gb of RAM.

  Kind regards.

• HP PavilionSleekbook 15-b009ee: HP Pavilion Sleekbook 15-b009ee Windows 7 Pro 64-bit drivers

  I need the Drivers of HP Pavilion Sleekbook 15-b009ee Windows 7 Pro 64 bit. Please if someone can sat down me.

  Hello:

  Try the W7 x 64 drivers and software for this model except the BIOS and firmware files.

  http://h22207.www2.HP.com/us-en/drivers/selfservice/HP-envy-Ultrabook-4-1100/5296027/model/5316650

  Your model uses the Intel HD graphics driver.

• HP Pavilion Slimline s3760in D: need help in Clean install Windows 10 pro 64-bit?

  Hello

  For the past few months I am running windows 10 pro where I had to upgrade windows 8.1 pro 32 - bit windows 10 pro 32-bit. If my system is activated in windows 10 pro and it is authentic.

  

  When I checked in the type of system, it says operating system 32-bit, x 64 processor.  4 GB RAM only 3.12 GB of RAM is usable.

  This means that my processor supports 64-bit operating system. That's why I intend to clean windows install 10 pro and install the 64-bit version so that I can use all 4 GB of RAM.

  That's why went into a tool for creating media and downloaded Mediacreation Toolx64 but when I try to launch the app it shows error "this app cant run on your pc. But Mediacreation tool for 32 bit gently. According to me, given that my current OS is 32-bit so mediacreation toolx64 is not running.

  So I was wondering if I run 32-bit tool mediacreation and choose 'create multimedia installation for another pc' and chosen architecture (32-bit and 64-bit) times, then the clean installation of windows pro 10 OS will I have the option to choose between the version 64-bit and 32-bit version?

  [2] already my windows 10 pro is active in 32-bit version, I get a product key error when I clean install 10 pro for the 64 bit version of windows?

  [3] will be my windows 10 64-bit pro is activated? Since my windows 10 pro turned in a 32-bit version.

  Microsoft memo said "Your PC will activate online automatically as long as the same edition of Windows 10 has been activated successfully on this PC using the free Windows 10 upgrade offer."

  HI Varadar,

  You're right, you choose the installation program of the media creation tool that corresponds to your current system, but create a support for another PC and select 64-bit or both.  I would choose 64-bit.

  Yes, what you plan should work.  Once you have upgraded to Windows 10 32 - bit and Windows checked 10 32 - bit is set, you can use Media Setup to switch to Windows 10 64 - bit.  But... I could ask you to wait a month.  It was reported on the sites a Updatefor Windows 10 is expected in November.  This update will include some changes and corrections that we have already published to our group of insiders test.  The recent blog post is hereand scroll to the bottom of reading on the Activation stuff.  We also wrote about the changes, including the news of your task in our own forum.

  What do you think should work now today, if there is no problem or bug there is no backup.  But if you wait a bit, then the backup as explained will use your Windows 8.1 Pro key into your HP motherboard.

  I hope this helps,

  Charles

• BIOS 4.03 for workstation xw9400 running windows 7 pro 64-bit

  None does not know where and how can I update the bios on a running windows 7 pro 64-bit xw9400 (HP does not list in the drivers section?) currantly only got bios V3.13 and im sure it should be on atleast v4.03?

  see you soon

  Oh well all good now, worked to followed her the road to iso cd and managed to update the bios to version 4.03.
  
  Once again thanks for the support...
  
  Concerning
  Chardsky...

• HP Pavilion 15 lowered a score of 8.1 for Windows 64-bit for Windows 7 Pro 64 bit driver problem

  I just downgraded a HP Pavilion 15 Notebook, which was just recently bought with Windows 8.1 64-bit installed.

  The owners could not get with Windows 8, so they bought Windows 7 Pro 64 bit.

  After changing the option of Secure Boot UEFI BIOS, I installed windows 7 for them, installed the drivers from the site HP Web for this model of laptop, but there are a few drivers who will not not turn on.

  Product number is F8S59EA #ABU

  SYS ID card is 2163

  Intel processor Core I5-4200U @ 1.60 GHz

  8 GB memory

  BIOS Version F42 has been upgraded to F62

  But there is a PCI device in device without driver manager now, details of the error are:

  PCI DEVICE

  Hardware ID

  PCI\VEN_10EC & DEV_5227 & SUBSYS_2163103C & REV_01

  There is also another error of unknown device listed, the details are:

  The unknown device properties

  Hardware ID

  ACPI\HPQ6007

  I don't know if this is related to the first error message, but I thought I'd list them here anyway.

  In addition, try to install the software Cyberlink listed on page of drivers for this laptop, Cyberlink Director Photo software, the software Cyberlink PowerDVD and PowerDirector Cyberlink software all refuse to install.

  PowerDVD and PhotoDirector gave "Software can be installed in the machine allowed" error message and PowerDirector gave the error message "is not a valid HP drive, the installer stops now.

  If someone could please help in telling me that drivers are missing, (I enter all the machine ID in the box HP drivers, pilots said it remained for this machine, installed correctly, just these some problems) I would be most gratefull and the owners of laptops would be too!

  Mushty wrote:
  

  I just downgraded a HP Pavilion 15 Notebook, which was just recently bought with Windows 8.1 64-bit installed.

  The owners could not get with Windows 8, so they bought Windows 7 Pro 64 bit.

  After changing the option of Secure Boot UEFI BIOS, I installed windows 7 for them, installed the drivers from the site HP Web for this model of laptop, but there are a few drivers who will not not turn on.

  Product number is F8S59EA #ABU

  SYS ID card is 2163

  Intel processor Core I5-4200U @ 1.60 GHz

  8 GB memory

  BIOS Version F42 has been upgraded to F62

  But there is a PCI device in device without driver manager now, details of the error are:

  PCI DEVICE

  Hardware ID

  PCI\VEN_10EC & DEV_5227 & SUBSYS_2163103C & REV_01 is a card reader.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63708.exe

  There is also another error of unknown device listed, the details are:

  The unknown device properties

  Hardware ID

  ACPI\HPQ6007 is the software of HP 3D Driveguard

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124661-1&cc=us&DLC=en&LC=en&OS=4063&product=6732717&sw_lang=

  I don't know if this is related to the first error message, but I thought I'd list them here anyway.

  In addition, try to install the software Cyberlink listed on page of drivers for this laptop, Cyberlink Director Photo software, the software Cyberlink PowerDVD and PowerDirector Cyberlink software all refuse to install.

  PowerDVD and PhotoDirector gave "Software can be installed in the machine allowed" error message and PowerDirector gave the error message "is not a valid HP drive, the installer stops now.

  If someone could please help in telling me that drivers are missing, (I enter all the machine ID in the box HP drivers, pilots said it remained for this machine, installed correctly, just these some problems) I would be most gratefull and the owners of laptops would be too!

• Maximum supported size of HARD drive for HP Elitebook 8440p Windows 7 Pro 64 bit runing

  Hello, I just bought a HP Elitebook 8440p "off lease" of Tigerdirect and seeks to upgrade the two memory (from 4 GB to 8 GB) and put in the eligible of the biggest HARD drive I can. Either a 512 GB SSD or a 1 TB WD hybrid WD BLACK2 (1 TB HDD / 120 GB SSD Combo drive in a single package!). I would like to see more large disk addressable by using Windows 7 Pro 64 Bit OS since I don't seem able to find this info on the web. HP offers only only a 256 GB SSD in its specifications. but I didn't know if it was do limitations of BIOS or availability at the time of production, even for the HARD drive to 512 GB.

  Also, I would like to know if 9.5 mm compliant Bay that it needs to be for the WD drive. Can't find that either, and while the new laptop has not yet happen, all measure exactly the same way regarding what works and what simply cannot be "cheated".

  Thank you for taking the time to read this and NO information to that effect would be Greatl appreciated!

  Essentially the reason why you do not have a maximum size of hard drive is because there is not everything. Between SATA and 64-bit OS', worrying about maximum size of hard drive is a thing of the past. Are the biggest readers found in the manual, as you suspected him, just a function of the market at the time of manufacture. It was a few years ago now, it is so understandable that the offerings were "at the time" more thin than now.

  Here is the Service Manual:

  Manual

  Page 4-9 shows the procedure of the Bay and the replacement of the hard disk. The Bay is made for a 9.5 mm thickness 2.5-inch wide SATA hard but the new 7 mm readers also works. The black hybrid drive requires some software (included in the package) to treat the two drives in Windows and I read a modest amount of disappointment in the documentation about them. If you can afford the 512 GB SSD go in this direction and you will not be sorry. I use a Samsung 840 Evo and it has worked perfectly for me for almost 2 years and the most recent 850 I hear is even better.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• DownGrade Windows 8 Pro 64 bit on 4540 s HP Probook Windows 7 Pro 64-bit

  Hello

  can someone tell me the correct procedure to downgrade pre-installed 64-bit Windows 8 Pro that came on my laptop 4540 s newly purchased to Windows 7 Professional 64-bit? Machine itsself comes not with any media. I also read the key is now also integrated into the BIOS. As I intend to replace the 500 GB HDD with a SSD 250 GB, I would like to re - install windows 7 at the same time. I know that you can download the vanilla windows versions 7 of m6mobile.fr and others and then install but I wanted to know if there was a formal process for HP machines. It would be also good to know that the process of extraction of the COA, so I can activate Windows 7 installation completed.

  I am based in the United Kingdom (and an employee of HP)

  (it seems I'm not the only one having this problem - I guess this method works http://www.pcworld.com/article/2015107/downgrading-from-windows-8-to-7-what-you-need-to-know.html?pa... )

  but before could someone confirm that part "call microsoft" will be ok for me if I have no physical cost... also what can I do if I have not a pro windows 7 product key to enter during the installation of windows 7 - because obviously I intend to use the rights to downgrade to windows 8 pro key!).

  advice appreciated.

  Ad.

  Ok...

  so having figured out that I can downgrade sounding MS I took the lead and mounted my new SSD drive and installed Windows 7 Pro 64 bit. Everything is good. What I need now is some of the correct drivers to get me going.

  If someone could point me to the right for the following, I'd be grateful so I don't waste time to download everything. My version is HP Probook 4540 s C4Y79EA (i5-3210/4 GB RAM/15.6 inches) model British.

  Some of the choices pilot have several versions of pointers to good enjoyed.

  It is mainly in the field of the network drivers for the Wifi and fixed ports.

  Thank you.

  I determined what hardware is in this model.

  WIFI/Bluetooth - download drivers Ralink

  Ethernet card integrated - download the Realtek drivers.

  The rest should be pretty straigtforward...

  Cheers.

• Driver with ATI Radeon HD 3850 AGP under Windows 7 Pro 32 bit problems

  Windows 7 Pro 32 bit reports after installation of the driver that no driver is present. There was patch drivers provided by ATI to solve these problems, but these drivers did not resolve the problems. Has anyone had success with this installation, and if so, would you please provide me with how you did this? Thank you. BTW, I did the ususal uninstall and then install, reinstalled the operating system via a facility clean and then installed the drivers, etc, etc. So far,nothing has worked. After Googling this issue I found that many others have had similar experiences with these driver problems. Now I have XP Pro and Win 7 Pro installed via dual boot and XP Pro is running pilots ok with no problems. Thank you!

  I came across the work of question three years ago on one of my machines.

  It is a problem of compatibility between the nForce 3 and AGP.  I don't remember the exact details, but with a nForce 3 and similar day SIS chipsets and a few others when they had a dual-core CPU in them, they would change the AGP port to use a PCI driver or something of this nature to enable the multi-core support (such as it's been hacked on toward the end of their development).  On Windows Vista and upward, such a workaround solution does not work.  SiS and some other published updates driver for the motherboard chipsets which he sorted, nVidia did not worth it, despite nForce 3 sold as Vista compatible.  nVidia pulled this stunt with a lot of things at the time, including their GeForce 5 cards, saying they supported Vista, same with the beta drivers and then they just canned originally.  They took both.

  It is a solution that will be the kind of work, but as you may have guessed, you will need to disable one of the cores of your CPU.

  You can do this by going to msconfig, click on the Startup tab, click Advanced... and changing the number of processors at 1.

  Reboot and your graphics drivers will spring magically to life.

  Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet atwindowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• HP Photosmart 3210 will not install on Windows 7 Pro 64 bit.

  HP Photosmart 3210 will not install on a brand new desktop running Windows 7 Pro 64 bit.  I downloaded the latest software, and when I run it, the installation window disappears shortly after it starts.  No error message.  I ran into several related issues lately.  I can't install a ScanJet 5590 on a new laptop running Windows 7 Pro 32-bit.  Said it ends, but nothing is installed.   Could the fact that there are other HP printers installed on these computers (network printers) installed using driver only before attempting to install the software cause problems?  I spent hours trying to solve these.

  OK, much better progress!

  If the software is always installed, tell him you'll connect later.

  Go to devices and printers, look for the printer here, make sure you that no documents waiting to print and delete the printer if it is there.

  Then go into Device Manager and remove all photosmart series 3200 drivers you find, you may need to click displays hidden on the view menu.

  Thirdly, go back to the devices and printers. Select another printer, as the writer XPS comes with Windows. Along the top, with adding a device, add a printer, print server, you will see properties. What to choose and go to the tab drivers. If you have the HP drivers in there you do not, select them and choose delete and "delete the driver only."

  Now restart and go to your Start menu and your HP folder. You must have installed the software, just no device driver, select "add a device" or "printer setup and software." Installation should complete without problem.

  One last thing, you must temporarily turn off firewall and antivirus installation, in which case he mistakingly tries to block the attempt to install.

  Good impression!

• Can I do a clean install of Windows 7 Pro 64 bit on Vista Ultimate 32-bit upgrade. Installation file will not work. The error is described below.

  The XPS 730 with Intel Q9450 computer yourself running Windows 7 64 bit? The details of performance show that it is capable of 64-bit. When I try to install Windows 7 pro 64-bit upgrade, the installer will not work. I get an error that reads:
  The version of this file is not compatible with the version of Windows that you are running.
  
  I'm currently running Vista Ultimate 32 bit. Everything that I read on Microsoft and elsewhere says that you can go from Vista 32 bit to an operating system Windows 7 64-bit as long as you do the clean install. I'm that far away since I can't even run the installation.
  Maybe nobody knows what could be the problem?

  Hi Hal K,

  Thank you for visiting Microsoft Answers.

  If you are currently running a 32-bit version of Windows, you can only perform an upgrade to another 32-bit version of Windows. Similarly, if you run a 64-bit version of Windows, you can perform an upgrade to another 64-bit Windows version.

  If you want to move from a 32-bit version of Windows to a 64-bit version of Windows, and vice versa, you will need to back up your files and then perform a custom of the version of Windows you want to install installation.

  You can see the following link, installation and reinstallation of windows: http://windows.microsoft.com/en-us/windows7/Installing-and-reinstalling-Windows

  http://Windows.Microsoft.com/en-us/Windows7/32-bit-and-64-bit-Windows-frequently-asked-questions

  Swati K - Microsoft support technician
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Upgrade Windows XP Pro 32 Bit to Windows 7 Home Premium 32 Bit.

  Is it possible to upgrade to Windows XP Pro 32-bit, Windows 7 Home Premium 32 bit. I have the disk to install Win 7. My processor is an Intel E6300 Dual Core and its supposed to be compatible with 32-bit or 64-bit. My system is: Mo AGP-IDE/SATA ASRock 4CoreDual-SATA2 R2.0/A/ASR, Intel LGA 775 CPU E6300 2.8 Ghz, memory 2 Crucial-1 Gig each, DDR II - 400 Mhz 184 pin sticks (but will DDR II 667 MHz 240 pin), HDD: IDE Seagate 320 GB ST 3320620 A, video card NVidia 7600 GS AGP, the PS Marine 500 Watt, 2 DVD - RW. I want to stay with the 32 bits of the system because most of my hardware is not compatible with 64 bit.

  Sunday, June 29, 2014 19:39:45 + 0000, RickJ41 wrote:

  Is it possible to upgrade to Windows XP Pro 32-bit, Windows 7 Home Premium 32 bit. I have the disk to install Win 7. My processor is an Intel E6300 Dual Core and its supposed to be compatible with 32-bit or 64-bit. My system is: Mo AGP-IDE/SATA ASRock 4CoreDual-SATA2 R2.0/A/ASR, Intel LGA 775 CPU E6300 2.8 Ghz, memory 2 Crucial-1 Gig each, DDR II - 400 Mhz 184 pin sticks (but will DDR II 667 MHz 240 pin), HDD: IDE Seagate 320 GB ST 3320620 A, video card NVidia 7600 GS AGP, the PS Marine 500 Watt, 2 DVD - RW. I want to stay with the 32 bits of the system because most of my hardware is not compatible with 64 bit.

  You can use a DVD upgrade, but you cannot do an upgrade with it. A
  clean install is required.

• Cannot get Windows XP Home Edition for a mapped network drive / share on a computer of Windows 7 Pro 64-bit

  I constantly tried to use the "NET USE" syntax to get a Windows XP Home system to keep & share mapped network drive on a Windows 7 Pro 64-bit of the system and nothing I tried or worked on ANY blog. I can map the current network through made normal drive right click on 'My computer' and then provide a designation of drive letter with the correct path and have had great success using the function "connect using a different user name." However, even with the box checked to re-connect to the opening of the service is WORTHLESS! I made a lot of attempts to use the Net use syntax to create a batch file to overcome this non-functional raw application. I would really appreciate someone who actually had this issue resolved and work. I have looked at all the Windows files on the XP machine, searched the registry about a possible switch, which could make the necessary changes and have made all necessary changes on the Windows 7 system to accept the mapped network share. Help!

  Hello

  Since you have a network with different OS' I hope that Win 7 is configured to run on asnetwork work.

  If evry thing is configured properly it can be a problem of how your router keep information network. With the help of Staic DHCP or IP static on computers could help solve the problem.

  Just in case you need to reconfigure your network.

  ---------------

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall isactive .

  Since you have a network with Win 7 and the other version of Windows, you must configure Windows 7 as work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  * Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  -----------------------

  Jack MVP-networking. EZLAN.NET

• Install windows xp pro 32-bit on pc that is already running Windows XP pro 64 bit. Product key does not work

  I have a windows xp pro 64 - bit PC. I would like to install windows xp pro sp3 32-bit. This is a PC that was used in our Engineering Department and now will be sent to a standard user in our society. I went through the installation and when I enter the product key on the COA label a message that is not valid. Do I need a different product key to install the 32-bit version of XP?

  A Windows XP 64-bit product key will not work with Windows XP 32-bit installation media.  You would need a genuine Windows XP 32 - bit product key. Carey Frisch