Windows 7 Pro Action Center shows current backup permanently

Windows 7 Pro Action Center shows current backup permanently, even if it's not, I don't have a backup set and Backup and Restore cannot find a backup.

Why can't Microsoft find a solution to this problem with the network or the corrupted/missing files? My system works fine even with this problem of current backup. So, I learned to forget. But it would be nice if Microsoft would solve this problem.

Hi flintnodule,

Microsoft can and will fix the issue for you, but because it involves dircet contact with the troubled pc the only way to do it is through remote assistance. that is to call you Microsoft and allowing the tech Advisor take control of your pc directly. THS can lead however still other problems that not all advisers have the same stanard in cognition, (I'm talking about previous experiances). That's why I stated measures for any user to repiar this problem themselves in over the answer, but for some reason not to many are eager to make they perfer to ignore the help and just complian. the way I used overkill stages of difficulty was the following. 1. removal of devices connected, 2. back up the system and all the files, 3. Defragment os. 4, everthing unistall, which is the third part. 5, prepare an external hard drive for windows by labelling and re-formatting upward (note do not quick format). 6, clean, install windows 7 but use the options to format your drive first. 7, do not install anything just to configure windows 7 to your configuration (test performance and reliability monitor if all ok). 8, perform an upgrade and after what game action center full tuning IE levels all the recommended and send information to all users. and set performance and reliability thanks to (allow) windows firewall. 9, Center of action for perform a full upward and the image of the value system and set it to your external hard drive. 10, test of reliability and performance monitor, once everything is ok and the Action Center indicates that it is active and there is no problem, you are ready to reinstall all of your software for your backup you make early.

hope this helps

your

ASHLEY No.: 1 FAN OF MICROSOFT AND WINDOWS 7 do not forget if you tick the response as correct, vote for him as useful to help other users find a solution faster

Tags: Windows

Similar Questions

  • I have 32 bit windows 8 pro & Media Center I want to upgrade to 64 - bit 32-bit

    I have 32 bit windows 8 pro & Media Center I want to upgrade to 64 - bit 32-bit

    Yes, you can use the same license key for re - install the version of media center and Win8 x64bit

    If you want to upgrade to x 64-bit, you will need to perform the clean installation of the operating system.

    You will need to back up all your data on external media before you install it.
  • In the windows 7 Action Center shows off windows Security Center

    In the windows 7 Action Center Watch windows Security Center disabled. I tried to turn it on, of SERVICES [automatically]. But after sometimes it becomes disabled automatically, use Antivirus, McAfee SecurityCenter. It is up to date and a license.

    Hello

    ·         You receive an error message when the windows Security Center is turned off?

    Method 1:

    I suggest to temporarily disable the Antivirus on the system and check if the problem persists.

    http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

    Once you disable the antivirus software follow the steps below to start the Windows Security Center service.

    one) to access the console type Services in the search field and press ENTER. You will need to click on continue if you are prompted to open the Services window.

    (b) in this window, you must locate the right-click Security Center service, now select Auto and select start. When the service fails to start, you will receive an error message.

    Note:

    Disable the software Antivirus is a potential threat to the security of the system, I suggest you to activate the antivirus as soon as you have completed the troubleshooting steps.

    Method 2:

    Try to perform a system online virus scan to check the malware/virus infections. The online virus scan will automatically scan your system and remove any potential threats caused by a virus/malware.

    See the link provided below to launch the Virus Scan online.

    http://OneCare.live.com/site/en-us/default.htm

    You can also use the center of McAfee Security installed on the system to check any infection of virus/malware on the system.

    Method 3:

    The problem may also be related to the damaged user account that so I suggest to create a new user account and check if that helps resolve the issue.

    http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  • Problems of Windows 8 with Action Center

    Greetings,

    I use Windows 8.
    I have problems with my services of Action Center, which denies my access to manually turn on Windows Defender, a long with error code 0 x 80070424 firewall.
    Earlier my wscsvc services missing actually, but I found a thread that allows me to re - import return.
    One thing I'm afraid however, wscsvc.dll file could be a version of Windows 7 - I'm not sure.
    Anyway, after getting the file back wscsvc, I am able to run Windows Defender. However, the option that allows me to turn on and off the center of the Action seems to have disappeared. And I still cannot turn on my firewall manually.

    I found some malware on my computer earlier and he was able to successfully get rid of them with Malwarebytes Anti-malware, I guess this is one of the reasons why wscsvc was missing.
    I would like to ask for help on how I could solve this problem. Thank you very much!
    Cara
    PS: I found a few posts on restoring my registry with the CD thing: but I don't know how since I don't have a CD of WIndows 8. (my computer has been pre-installed with Windows 8, and the CD only I can find the ASUS driver CD or anything...)

    Greetings,

    Then I did the scan, but he can't find anything...
    So, I tried to scan my computer with Malwarebytes Anti-virus and tdsskiller and aswMBR and esetsmart... I seem to have got rid of the virus, and after restart twice Windows Defender works again, after his auto-scan, firewall is back to normal again.
    It's really weird and hope everything goes well with the computer more...
    anyway thanks a lot for your help and your time!
    Cara
  • Windows/Windows XP PRO Security Center

    I need help. Windows security is not let me run any of my browsers except IE and do not let me run cleaning tools or to download anything whatsoever. My computer has Mcafee on this also, which does not run either (don't know why). Security of WIN says that I have to BUY to cut it (win security) on. Windows Firewall came up saying that a file has sunk to the remote user on the internet. I blocked several times whenever she appeared so I said lets just to see if I can run anything again last. No. > Windows security is not free? And how can I solve my problem? Very aggravated.

    Your system is infected with a rogue security program. It's called "thugs" because he pretended to be a good guy but is really bad. Don't pay them!

    Search for removal here Bleeping Computer how removal steps - of - http://www.bleepingcomputer.com/forums/forum55.html
    or here - Malwarebytes malware removal Guide - http://tinyurl.com/5xrpft

    Malwarebytes' Anti-malware (MBAM) or SuperAntiSpyware will often do the job. Both have free versions and you don't need to buy these programs.

    These can work for you, and all can be good. However, in many cases the computer will also infected with other horses of Trojan and protected by a rootkit. These machines are extremely difficult to clean. If your machine is one of these cases, either the interactive assistance to one of the specialty forums listed in the link below, OR take your machine to a professional on the local computer OR backup your data and do a clean install of Windows. It's your choice. I do not recommend using BigComputerStore/GeekSquad types of places.

    http://www.elephantboycomputers.com/page2.html#HJT-links MS - MVP - Elephant Boy computers - don't panic!

  • My computer is on a network, but Windows 7 (Pro x 64) shows that it is not. Cannot change network location to home. Cannot use the homegroup.

    I'm putting my network (with homegroup) home, but when I go into control panel > network and Internet > homegroup, it says:

    "This computer cannot connect to a homegroup." Then,

    "To create or join a homegroup, network location of your computer must be on home."

    Okay so. I go to network and sharing Center and click on "connect to a network" and I get a box in the lower right corner that says "no connection available.

    I find that strange, because when I click on 'My Computer', I see in the left pane all the computers in my house under 'Network'... so I'm in network... but I'm not?

    It is a problem because until I am able to add this computer, I am unable to share the data on this computer and it is my office alone AND the pc is connected to my router.

    I can not access my storage drive. I can't stream media.

    All opinions are appreciated. Thank you.

    Hello

    Check the Device Manager for the entry of valid card of the wire.

    http://www.ezlan.NET/Win7/net_dm.jpg

    If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

    Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

    http://www.ezlan.NET/Win7/net_connection_tcp.jpg

    Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).

    Turn off the computer and the router, reset the router and the computer.

    Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

    It still does not work, try this too.

    Firewall software.

    Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall Windows Firewall should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

    General example, http://www.ezlan.net/faq#trusted
    Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly, or uninstall it completely allowing the clean flow of traffic on the local network. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

    Reset the network stacks .

    Type Cmd in the search text box.

    Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt.  Allow the elevation.

    Type netsh winsock reset at the command prompt and press the Enter key.

    Do the same process to refresh the TCP/IP, just replace the command typed with.

    netsh int ip reset

    Restart the computer.

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • Missing installation of Windows XP Pro Media Center Edition 2 disc

    I had problems with my laptop and decided to reformat the hard drive and reinstall Windows.  I discovered during the installation that I need a disc 2 for a complete installation.  Since the operating system is installed on my laptop, I was not aware of this and have either lost or never had a disc 2.

    Do you know where I can get/download a copy of any disk 2?

    How to replace lost, broken, or missing Microsoft software

    Carey Frisch

  • False issues action Center

    Hey,.

    Currently my Windows Action Center shows my Virus Protection and firewall off which are both wrong. I have run Norton 2010 and it works very well. When I open the Action Center and click on ' turn on ' it opens Norton but does not remove the question of the Action Center.

    Everything is up-to-date and I didn't have this problem in the first place, so I'm prosuming there is a problem with a recent installation. I installed Adobe CS4 on a trial a couple of days, but after a reboot, the problem was not there. When I turned my system on last night, it appeared and I can't solve.

    Except that the only thing that I have installed are games, any help would be appreciated

    See you soon

    Graeme

    Aslong as my system is safe it's all I'm really worried, I was just trying to solve an irritating problem ;)

  • Internet access Messages Action Center

    Why Action Center shows no internet access, but I'm connected by ethernet?

    Thank you very much. I read the post. It turns out that this is not a driver problem. I think the problem is that my office has a wireless LAN card and an ethernet card. I am connected by ethernet. I had turned off the wireless LAN card, because I noticed that he was trying to connect. Well apparently for some reason any Windows detected it, and for some reason any thought I was not logged. Only the Microsoft Gods know why. Anyway, I enabled the adapter then I went back and he subsequently invalid and everything seems fine.

    In any case, thanks to pick me up in it.
  • Windows 8 Pro transfer laptop broken again laptop w / Windows 8.1

    Hello, I was wondering if it was possible to transfer my Windows 8 Pro license (from a cell broken that came pre-installed with Windows 7 and then upgraded to Windows 8 Pro then 8.1 Pro when the update became available) to my new laptop.

    I still have the product key as well as the reception of the digital purchase of Windows 8 Pro.

    I currently have a new laptop that came pre-installed with the basic version of Windows 8.1.

    Thank you in advance.

    Edit: I'm hoping to do for Windows 10 pro once it is available.

    Hi Juan,

    Thanks for posting your query in Microsoft Community.

    The task you're trying to run is possible if you have formatted the drive in which you installed Windows 8 Pro and then install Windows 8 Pro on another computer and use the same product key to activate the operating system. You will only be able to activate using the same product key, if you try to install the same version of Windows operating system. This activation can be done by phone.

    For more information, see the suggestions provided by Rajesh Govind and Andre Da Costa in the Microsoft Community link.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/transfer-the-Windows-8-license-from-the-old/aee82e47-0812-4F46-9bde-fac1b891ff13

    It will be useful.

    Please let us know if you have further questions about Windows. We are happy to help you.

    Thank you.

  • The transition to Windows 7 pro for Windows 10 Pro for Adobe CC

    Hi all

    I would like to get comments on the transition to Windows 7 Pro for Windows 10 Pro. I'm currently running windows 7 pro 64-bit with Creative cloud mainly for video editing applications (Organization, After effects, Illustrator, Photoshop, hearing etc... (I always use first CS6 and Encore CS6 for some projects more elders and Authoring).

    My computer configuration is the following:

    -Windows 7 Pro Service pack 1

    -Processor Intel Core i7-4960 X [email protected]

    -Motherboard: Asus P9X79

    -64 GB of RAM

    -SSD 512 GB Pro 840 Samsung

    -2 x ASUS GeForce GTX780

    -9To hard (3 x 3-Western Digital Caviar Black) in Raid 0 for video work

    -Hard disk data CaviarBlack WD 2 TB

    I would evaluate whether it's a good idea to transition to windows 10 pro, is the update is going to be done automatically without having to reinstall all the software?

    I'd appreciate your comments of a person with a configuration similar to mine, or by experts from Adobe

    Thanks in advance

    Hello

    Please see Windows 10 and Adobe Creative Cloud

    Hope that helps!

    Kind regards

    Sheena

  • After backup of Windows 7 Action Center indicates error 0 x 80070002

    I use Windows 7 Home premium version.

    When the scheduled backup is complete, the Action Center say that some cells have been ignored, and the path is "Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\Podcasts file. Error: (the system cannot find the specified file. (0 x 80070002)) ».

    How can I make sure that I don't GE this message

    Error message when you try to restore from a backup complete a Windows Vista-based computer: "the system cannot find the specified file. (0 x 80070002) »
    http://support.Microsoft.com/kb/951002/en-us

    0x8100002F error code and or error code 0 x 80070002 when you back up files in Windows 7
    http://support.Microsoft.com/kb/979281/en-us Note: for senario #2 you must set Windows Explorer Tools/View tab:

    (1) show hidden files, folders or drives
    (2) remove the checkbox «Hide empty drives...» «, «Hide extentions...» "and"Hide protected operating system..." ».
    3) click on "Apply to folders", then click "OK" to exit.
    Normally the 'Contacts' and 'Research' folders are created during the installation process of Windows before setting the time zone option. The "AppData" folder is re-created when the Windows Vista to Windows 7 upgrade process.

    Also: Win7 Backup - error. (0 x 80070002) - cannot find the file specified.
    http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/bff71aac-c78e-42bd-A959-116019c93478

    J W Stuart: http://www.pagestart.com

  • Windows Action Center does not start

    I got a virus in my computer a few weeks ago and I managed to clean it away. However, I just noticed that the action center to my computer does not start.  Whenever I try to turn it on, it shows me a message "unable to start the Windows Security Center service. In fact when I use the services.msc program, that's not even be on the list here. Firewall does not normally or the other. It just shows the message "Update your firewall settings" and when I click on the box "Use the settings recommeded" it shows me an error message "Windows Firewall cannot change some of your settings for error code 0 x 80070424.

    Of course there is a lot of information on the Internet about the problem, but none of them does not seem to work in my case.

    I have Windows 7 Home premium sp1.

    I even tried to repair my windows installation, but that no longer works. He refused to uppgrade to a previous version, because the drive is off course basic win7 and my current one is win7 sp1. There are also some programs that are in conflict, even if I could not even find them in my computer.

    Is there any solution for this?

    It helped with my Action Center problem.

    http://GeekDrop.com/content/Windows-Security-Center-service-is-missing-and-wont-start-solved

    And this with the firewall.

    http://www.SevenForums.com/system-security/202166-unable-start-Windows-Firewall-2.html

    Win 7 security 2012 was the virus.

  • When I opened the Windows Security Center it says "the Security Center is currently unavailable because the Security Center Service is not started or was stopped.

    When I opened the Windows Security Center it says "the Security Center is currently unavailable because the Security Center Service is not started or was stopped.  I can't see if any firewall or antivirus works etc.  Anyway to reinstall the Windows Security Center or is there something else I can do.  Concerning

    Hello

    · Do you remember all the recent changes on the computer before the show?

    · What is the service pack installed?

    Follow the procedure described at the link below and check if it will help: error message when you try to open the Windows Security Center in Control Panel on a Windows XP computer: http://support.microsoft.com/kb/919291

  • I can't use windwo Defender, my pc show if you use another application to find the unwanted malicious software, use action center to cheack app status

    "I can't use winddow Defender, my pc show' If you use another application to find the unwanted malicious software, use action center to cheack app status."
    Please help me solve. Thank you

    Hello

    If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

    There is nothing to worry.

    Using both programs at the same time can cause system conflicts, etc.

    If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

    "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

    Right click and select Properties , ensure that Startup Type is automatic.

    Once modified, click apply and OK.

    Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

    .

    If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:

    http://www.Malwarebytes.org/products/malwarebytes_free

    And for now, change startup Vista programs without using Defender, use one of these methods:

    "How to use MSCONFIG in Windows Vista"

    http://netsquirrel.com/Msconfig/msconfig_vista.html

    Or the program Autoruns for FREE:

    "V11.21 Autoruns for Windows"

    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

    See you soon.

Maybe you are looking for

  • Solution Center HP says that my printer is disconnected?

    I have a newer desktop with Windows 7 running computer. My printer says it lack drivers but I did everything to update & it is supposed to be compatible with Windows 7, but in the center of HP Solution it says that the printer is disconnected again I

  • 14 - ac136tu: PCI encryption/decryption controller

    I have a new laptop purchase. I install win 7 32 bit and also the drivers but still missing here. the encryption/decryption PCI controller... pls help me to solve this problem...

  • Exportar datos a UN mismo archivo

    Buenas tardes, Estoy con el modulo acoustic and Vibration Assistant. He has recorded una Señal ruido y temporal mi idea're poder pasar cada segundo recorded a UN mismo archivo. ES decir,. Grabar el espectro en frecuencia del segundo 1 Grabar el espec

  • Customizable analog clock

    Hi, I want to just ask you guys if anyone of you use the "customizable analog clock... When I select this option, he returned to the digital clock or the sony (depending on whether you are using before you choose the customizable clock) on the locksc

  • printer and the computer will not communicate. Due to upgrades and technical support found no reason __any!

    No communication betwn pc and printer.  Has done all upgrades, tech only checked - no problem!  I have 6 documents waiting to print.  Cannot get c8180 printer wireless to print via my pc.