Windows 7 problems with gel applications, programs stop working until you restart

Similar Questions

• Satellite M60-132 - USB stops working until you restart

  My problem looks like this:

  All USB ports die after a few minutes (time may vary, but is shortened recently) after the start. They give no error - the USB mouse stops responding, the USB drive gives stops giving "delayed write failure" or sth like that. They are all visible and OK in device (Windows XP) Manager, no problem not being reported here. They have just stop working. I tried to reinstall Windows. It is not dependent on the OS actually. For example, I can boot from a live CD of SuSe Linux and ports will also die after a few minutes - they do on any OS tested.

  Now, I have discovered (GOOGLE usb ports stops working until the reboot) that several Satellite M60 users report this problem with their old cell phones. Exactly the same thing - ports die after a certain time of start and remain that way until you restart. In one case the user writes that he bought a cardbus PCMCIA USB controller and the problem continues - the ports of the controller when dying as well as embedded.

  My idea is to try even when the PCMCIA - maybe it will work in my case (another chip etc - you have never know). And anothr one must try to connect a USB hub to the Firewire port available. There are USB to Firewire Converter cards - could work like that?

  Anyone know any solution to my problem or have an opinion on my ideas? I am looking to buy a new laptop, which I can't really afford right now...

  Hello

  To be honest I've ever read on these problems on the Satellite M60, but it can happen from time to time, because it of also a fairly old laptop.

  My friend also uses a PCMCIA card that has USB ports on his old notebook. He is quite satisfied with this solution because it don t need to each time the USB ports. Just sometimes if he's copying files on USB.
  These cards are cheap, you can get it for a few s Euro and you can buy this card where you want, for example Amazon.co.uk.

  I never heard firewire to USB ports, which is new to me and I n t have experience with this.

  Welcome them

• iOS 10 video playback stops working until you restart

  I have an iPad Mini retina, and since the upgrade to iOS 10.0.01, a short period of use causes videos to stop working.

  Videos in Safari, Chrome, YouTube etc. appear in the cache (saturated with progress on the top bar), but no response to play. The first image of a video appears, but only in the form of static image. I am able to change the static image displayed by rubbing them at any point in the video, but playback will not occur.

  The only thing that allows video playback is again restart the device (apps force closing, locking and unlocking etc. doesn't help).

  Hello, Sunkai!

  Thank you for using communities Support from Apple. I understand from your post that you're having trouble playing videos on your iPad mini; the video will start but will be stuck as a single image, as if the buffering and never take back (at least until you restart). I mainly use my iPad for watching videos, so I know it's important that they play in fact; I'm happy to help you!

  I have some troubleshooting I can offer to you. Before you begin, create a backup of your iPad using iCloud or iTunes, following the instructions here: How to back up your iPad, iPhone or iPod touch

  Once you have your backup, try the following steps, in order. A video test after each step and will stop when the problem is resolved.

  1. Make sure your iOS software is up-to-date. In the last week, iOS 10.0.2 came out. Use the following article to get help update: update the iOS on iPhone, iPad, or iPod touch software
  2. If this happens on a Wi - Fi connection, try restarting the network you are using from the router or the modem (if possible). If it is a private (for example, your home network) WiFi network, try to remove all the devices on the network, then by simply adding your iPad in return.
  3. Try a different network.
  4. Reset the network settings on your iPad under settings > general > reset > reset network settings. This will affect all personal data (like your photos, contacts, calendar of events, etc.) but it will remove saved passwords, and Wi - Fi networks one previously used settings APN or VPN and all paired Bluetooth device.
  5. Restore your iPad settings, following the steps described here: use iTunes on your Mac or PC to restore the iPhone, iPad, or iPod touch to factory settings

     Once the restore is complete, configure the iPad as a new device (i.e. without using the backup that you created earlier, at least temporarily). You can sign in iCloud, iTunes and App Store, iMessage and FaceTime with your Apple ID test then a video.

     If the problem is resolved, you can restore your backup by the information here: restore your iPhone, iPad or iPod touch from a backup

  Have a great day!

• a problem with the application to stop working. Windows will notify you if a solution is available

  spooler stopped working

  The print spooler crashing is almost ALWAYS due to corrupted printer drivers.  Unplug the printer from the computer, uninstall the drivers.  Reset.  Download printer drivers updated to the website of the manufacturer of the printer.  Install the and do NOT reconnect the printer to the computer until the software tells you to do.

• 7 error "Paris 7.2.241.1enRegInstaller.exe of work and has been closed." A problem with the application to stop functioning properly. Windows will notify you if a solution is available.

  Original title - 7.2.241.1enRegInstaller.exe

  Hello.

  Today, JUST after I "Set Windows to update," twice, I got the disconcerting message:

  "Paris 7.2.241.1enRegInstaller.exe of working and was closed".

  A problem with the application to stop functioning properly.  Windows will notify you if a solution is available. »

  Any wisdom or experience with this?  I'm on a 64-bit HP Pavilion older (dv7-1245dx) with this OS JUST-update Windows (Vista Home Premium).

  Thank you.

  GIES W

  The solution has been found just uninstall bing bar, restart the computer, and if you want just bing toolbar to reinstall. This easy solution my system fixed.  Bing has again reminded all my points that I have amassed

• The Setup program stops working when you try to uninstall the installer of qwest

  the Setup program stops working when you try to uninstall the software

  the Setup program stops working when you try to uninstall the software

  Hello

  Try uninstaling with revo uninstaller (download the trial for the link.)

  link

  Use the advanced uninstall, method, delete the associated files and reg keys.

  Good luck

  Chyavan

• I bought for the Adobe Master Costume CS5.5 product packaging a few years back and today I get the following message appears: "Configuration Error: there was a problem with the license of this product." You restart the computer and restart production

  I bought the Adobe Master Costume CS5.5 product packaging a few years back and today I get the following message appears: "Configuration Error: there was a problem with the license of this product." You restart the computer, and restart the product. Error 213:19 ".

  That was before Adobe moved to a payment structure based on participants. I need to be able to access these programs. Please provide a solution to the problem.

  order to C:\ProgramData\Adobe & C:\ProgramData\Adobe\SLStore folders full reapply administrators property back on the C:\ProgramData folder and then add everyone.

• Windows Media Center Receiver Service stopped working and was closed. A problem with the application to stop functioning properly. Windows will notify you if a solution is available.

  Started getting the error Windows Media Center feared about 3 weeks ago.  I have tried the MS fix, reflected on the web for solutions, have run sfc/scannow (no violation of integrity) and nothing works.  Cannot restore system it's been 3 weeks.
  System was working fine 1 day and then bam... error messages began to appear.  I can always go into Media Center and listen to music or watch recorded shows.  I just can't watch TV or record something again.   I checked the Device Manager - material and everything works fine. Need help please...   Thank you.

  I guess that's the article that you are referring to?

  Error message when you start a Windows Vista-based computer: "Windows Media Center Receiver Service stopped working and was closed".
  http://support.Microsoft.com/default.aspx/KB/936229

  This site has some good ideas for you to try.

  How to fix the Windows Vista registry entries and files Media Center
  http://blogs.msdn.com/astebner/archive/2007/03/16/how-to-repair-Media-Center-files-and-registry-entries-on-Windows-Vista.aspx

  "Windows Media Center Receiver Service... "Error
  http://thegreenbutton.com/forums/p/50233/223005.aspx

  http://www.Google.com/search?q=Windows%20Media%20Center%20Receiver%20Service%20stopped%20working&hl=en&RLS=com.Microsoft:-AU & output = search & TBS = rcnt:1 & tbo = 1

  See if the System File Checker can help you?

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212/#appliesTo

  See if you can isolate some processes of third party as the culprit?

  310560 How to troubleshoot by using the Msconfig utility in Windows XP
  http://support.Microsoft.com/kb/310560

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/default.aspx/KB/929135

• Windows Movie Maker 6.0 Vista immediately stops working when you try to open.

  Hello!

  I've been all around the internet trying to solve this problem, but nothing has worked so far.  When I try to start Windows Movie Maker 6.0 for Vista, (in general), it stops working at their opening saying the following:

  "Windows Movie Maker has stopped working".

  There has been a few times when it actually opens and I can work on my videos, however, it's very, very, rare and seems to happen randomly.

  I tried to open in safe mode, but it still fails to open.  I also tried to open .avi short and simple with WMM 6.0 files to see if it will be open, but that, generally, does not either.

  Once, I was able to open random and I have disabled all the filters on the Compatibility tab and temporarily activated only video filters that I needed.  That seemed to fix the problem for several days, and I could open Movie Maker 6.0 several times.  Sometimes it would freeze everything and save, or stop working when importing video files, but at least it would be open.  I was able to record some videos.  After a few days, my computer day and WMM 6.0 is more open more.  I don't know if yes or no update is the reason why Movie Maker 6.0 started crashing again, but it was the only thing that has changed on my computer while I could uncheck the Compatibility tab filters and open WMM 6.0. [Could uncheck all filters to be part of the problem?]

  I usually works with .mov files, and I read on how this type of file sometimes causes problems with Windows Movie Maker.  However, the problem normally occurs when I try to open the program (and if WMM opens, I can very well change .mov files).  I do not think that the file type is causing the crash, but I guess that's always a possibility...

  I also read that sometimes Windows Movie Maker 6.0 for vista doesn't work with all computers that have vista installed, and Windows Movie Maker 2.6 must be used to place.  Windows Movie Maker 2.6 is working fine on my computer, but it cannot change the .mov files, or record in HD.  I had horribly degrading the quality of the video with the conversions of files to use WMM 2.6.  Windows Movie Maker 6.0 is much better, on the rare occasions that it works.  Do you think I should use Windows Movie Maker 2.6 now?

  Here are two problem reports that appear more often when you try to open Windows Movie maker 6.0.  The window of support almost always said I need to update my computer again (even if there is no new update), or that it is a problem of security Data Execution Prevention.  Windows Movie Maker cannot be added to the list of exceptions to Data Execution Prevention, or I can check to see if the filters from the Compatibility tab are always disabled in the program, I don't know how to solve this problem...

  -----------------------------------------------------------------

  Signature of the problem
  Problem event name: BEX
  Application name: MOVIEMK.exe
  Application version: 6.0.6001.18341
  Application timestamp: 4ad5c77d
  Fault Module name: StackHash_6f96
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception offset: 0378415b
  Exception code: c0000005
  Exception data: 00000008
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033
  Additional information 1: 6f96
  More information 2: 39ee662180b2f2ed5cfc67e5914ae855
  Information additional 3:6366
  Additional information 4: 8328a225406b340b1b7b5f591aa5688c

  Additional information about the problem
  Bucket ID: 1197617492

  -----------------------------------------------------------------

  Signature of the problem
  Problem event name: APPCRASH
  Application name: MOVIEMK.exe
  Application version: 6.0.6001.18341
  Application timestamp: 4ad5c77d
  Fault Module name: StackHash_1703
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception code: c0000005
  Exception offset: 032e41a4
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033
  Information additional 1:1703
  More information 2: 2264db07e74365624c50317d7b856ae9
  Information additional 3:1344
  Additional information 4: 875fa2ef9d2bdca96466e8af55d1ae6e

  Additional information about the problem
  Bucket ID: 1909412930

  -----------------------------------------------------------------

  The "BEX" error happens much more frequently than the "APPCRASH" error  In addition, I have Windows Vista home premium installed and a 32-bit operating system.  I don't know how to read the problem reports, or if it's all the information you need.  I'm not very good with computers at all the... Any help and ideas would be greatly appreciated!

  Thank you!

  Very often, but not always, Code exception: c0000005 is a permissions access error, so have you tried right-clicking on the MM shortcut or .exe and selecting the option "Run As Administrator"?  Other times a reinstallation of the program crash can fix.  As you can not do with Movie Maker the next best option is to try the System File Checker.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212/#appliesTo

  Have you tested another user even if you need to create one to do this?

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive.  If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

  See how many unsigned drivers, you have running on your computer.  This article will guide you on the instructions, but all you need to do is type sigverif in start run.

  How to identify unsigned with sigverif utility in Windows Vista drivers
  http://www.WinVistaClub.com/F34.html

  Vista Movie Maker DEP Fix
  http://www.YouTube.com/watch?v=tkpURM4FFt0

  In the fix above which is sometimes, but not always with success, it is suggested to leave it on the AVI decompressor.

  There are a few suggestions that Nero is a problem if you run that at all?

  Windows Movie Maker has stopped working
  http://blog.SteveX.NET/2006/11/Windows-Movie-Maker-has-stopped-working/

  If a piece of software can crash Movie Maker may be other software can do, then try Movie Maker in a clean environment, without other software running.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  http://www.Google.com/search?q=Movie+Maker+DEP+Vista&RLS=com.Microsoft:-AU & ie = UTF-8 & oe = UTF-8 & startIndex = & startPage = 1

• Screen flat HP Compaq THE 1711 worked until you restart Windows 7

  Original title: to a lost need help

  I have a hp laptop g72-227wm with windows 7 Home Edition premium my lcd screen is broken so I started using a hp compaq le1711 flat plug 'n play screen worked fine pluged in and the pc installed the driver so that its flat screen name everything worked good until I restarted a day now , I don't know what happens when I turn the pc at the time of its entry on can hear the fan turning when it frist starts, then it gets exit the f12 key again its built you in wireless when I press the power botton on the CAP lock number and wireless light lights upward and then the cover turns off lock and two other stays on f4 is the key which must pass my screens back ive tried to turn the pc off all her unplug printer usb, power cord pulled out the dough and held the botton of power during 15 dry his should do a hard reset that I got support on hp iv tried all the shortcut key that I could find that I thought would help the Ive tried to do a fortory reinstall with the s of CD that came with it I have nothing on the pc I have need of lucky 3 days be because I took every thing and put it to hard drive extal. evil take all the help I can get thanks for your time in this matter

  Hi, JGHippie,

  You are able to open the event viewer and look for error messages?

  Post back verbatim with the event ID impossible

  Try to use this combination of keys FN + F5

  How old is the computer?  It is still under warranty?

  Check these support Docs

  Here

  Or, connect a monitor, projector or a TV (Windows 7)

• Windows Live Mail and other essential programs stopped working after the upgrade to IE10?

  I installed IE10 to Win7 and my Windows Live programs all fail. I tried 2011 and 2012 without luck, 2009 will take place... but it's so old :-(

  I tried various repairs and running in compatibility mode - without success.

  The programs will all attempt to start and then report what they can't.

  If I run in safe mode the error reported is 0 x 80041161, but none of the fixes offered to this problem have does not work in my case.

  There is no previous version or uninstall to IE10... and I'm not really sure it was IE10 causing the problem - it could be a coincidence.

  The programs will all attempt to start and then report what they can't.

  There is no previous version or uninstall to IE10

  The problem is probably with your graphics card. IE10 requires some improvements in W7 handling graphics. If your graphics card can't handle these, you will see a variety of flaws, including Windows programs (Live) Essentials unable to start or run poorly.

  Go to Windows Update > installed updates, find KB2670838 and use the Uninstall button to remove it. This will uninstall IE10 so. Then check on the Web site of the manufacturer of your computer/graphics to display updated drivers.

  Read more here: KB2670838 Windows Update can affect Windows Live Mail on Windows 7

• Receive error message "MFC Application has stop working" when you try to run a PED Basic on Windows 7

  Original title: I am trying to run a PED Basic on Windows 7, I am not able to access my creations on my hard drive. When I try to open the file, I get a MFC Application has quit job message. Any ideas? __

  Window 7

  1.06 based PED

  Hello photoheiress,

  Check the following:
  1) go to Brother Web site and check you have the latest Windows 7 drivers/software for your Brother model.
  (2) try to run in Compatibility Mode. If your Brother model is compatible with Windows XP, then choose XP or the brother Software was written for any operating system.
  (3) when you install the setup.exe or .msi file, right click and select "run as Administrator".

  If please reply back and let us know if none of the suggestions helped solve your problem.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Range Dell EqualLogic has stopped working when you restart the failure

  During and after an interruption of scheduled maintenance work, ESXi cannot mount on our Dell EqualLogic Array data warehouses and I have no idea why.

  We lack ESXi 5.0.  Shut down us throughout the weekend, replaced the network cables and when we returned to our ESXi hosts could not see the Bay EqualLogic iSCSI, but you could see several other berries on the same storage system iSCSI.  Digging into logs, I see the ESXi host making the CHAP authentication to the EqualLogic Bay, and the said table it connects successfully, then it loses connection about 10 seconds later.  10 seconds more ESXi tent reconnection to the EqualLogic and the same thing is happening again.

  I see several newspapers in ESXi hostd.log indicating this table goes ONLINE and off LINE and another line indicating "sense data Possible" leading me to http://KB.VMware.com/kb/289902 .  I feel really disabled at the moment because it's the Bay of storage accommodation our vCenter Server, which puts us in trouble right now.

  Also, if I try to "Add Storage", ESXi sees EqualLogic stores exist (watch a sufficient volume, size etc.).  However, as I'm trying to add them (via vSphere Client), step 1 takes a lot of time to finish, step 2 indicates the "disks are empty" (which I don't believe), then after an another long this timeout a popup error.

  Are there commands or utilities that are good for the diagnosis of iSCSI specifically?

  I can post more specific journal details if it is useful.

  PS - The new network cables are ok in communication with other storage targets, and it has not replaced the EqualLogic cables.

  Fixed; the MTU setting on my storage switch was mowing part of storage traffic.  Here are the troubleshooting steps that I went through, maybe it'll help someone else.  The solution didn't exactly have anything specific to do with ESXi or EqualLogic.  Basic troubleshooting and digging.

  Newspapers/events storage array inspection revealed he saw and accepted the ESXi host connection appempts.  I saw messages to the effect of:

  -Connection of ESXi iqn blah blah blah established; Successful CHAP authentication.

  -10 seconds later: Connection reset / abandoned by peers.

  -5 seconds later: ESXi connection successfully established...

  (rinse and repeat several times)

  Inspection of the file hostd.log ESXi showed several messages of 'connection reset by peer '.  The storage array and ESXi have been pointing to the other... so the switch is the only thing in the middle.

  Troubleshooting steps now:

  -using the vmkping ping on the table of the ESXi - success: vmkping 192.168.1.20

  -using the vmkping ping on the table of the ESXi with a size of 9000 (jumbo frame size): NO RESPONSE! : (vmkping) s 9000 192.168.100.20<-- this="" is="" where="" the="" money="" was="" for="" finding="" the="">

  MTU has been set at around 9000.  It turns out that the switch should be set a little higher (taking into account headers of packets? who knew)

  So this Setup ran for more than a year of intact working and just stopped when we took everything downstairs and brought it up.

• Restart after that a windows update problem with VirusScan from McAfee (total Protection)

  I'm under 64-bit Windows VISTA Home Premium SP 1 on a Dell Studio 540 desktop.  8.0 GB RAM.  Intel Core 2 Quad Q9400 CPU @ 2 .66GHz.
  Late last night, I started the PC to go online.  Shortly after, I was invited by Windows update to restart.  So I closed off everything and rebooted, except that I kept scheduled analysis of McAfee, which I set up for Fridays.  I have McAfee Total Protection, which includes VirusScan.  That the PC would shut down, there was a message on the screen of McAfee who said, essentially, stop this scan before restarting.  I'm paraphrasing - I didn't write down the exact message.  After reboot, I started again the background anti-virus scanning.  After a few minutes, I received the following message:
  Microsoft Windows
  Order McAfee VirusScan Scan - Are asked to work and was closed. A problem with the application to stop functioning properly. Windows will notify you if a solution is available.
  I have not received a solution of Windows.  I completely uninstalled McAfee Total Protection, following the instructions of McAfee, then reinstalled.  Everything went very well with these processes.  I have yet to receive an indication of the McAfee software that something is wrong.  After the reinstallation, I tried a scan, but got the same error message as above after a few minutes.  It does not occur immediately, analysis continues for about 5 minutes, then abandoned.
  Chatted with Dell today.  They suggested a system restore, I will try then.

  What updates have been installed?

  During certain infections that are designed to defeat security software will cause the bomb on analyses with an error.

  I also suggest you contact the McAfee Support since it is their product which blocks.  http://service.McAfee.com/TechSupportHome.aspx?LC=1033&SG=TS

  To view installed updates:

  1. click on start > Control Panel > Classic view > Windows Update.

  2. along the top, click view update history.

  3. click on installed updates

  4. you can sort by name, status, Type, or Date updates. You can also click on each update and select Show details to access the details of this update.

  Microsoft partner - "gentlemen, you can't fight in here! This is the war room. »

• IE3SH Application has stopped working any ideas please

  Hi, need help, and I am not very informed with PC. I get the following errors when I start my laptop?

  "This application has failed to start because BHO.". DLL was not found. Reinstalling the application may fix this problem. and "IE3SH Application has stopped working properly. Monitoring of Windows closes it!

  Any help would be appreciated.

  Thank you

  Barry

  Hello

  It seems that it is the remains of a malware infection.

  Read about it:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/bhodll-application-has-failed-to-start-and-the/1458fc6c-37f9-4CE8-af46-168d4c6dea68

  And do a scan of Malware:

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware, if necessary in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If BHO. DLL error continues to get starting using this free program entries;

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  See you soon.